Can't BUY iPhoto book - Error Message "incomplete book." Problem with the theme "photojournalism"?

Similar Questions

• I bought for the Adobe Master Costume CS5.5 product packaging a few years back and today I get the following message appears: "Configuration Error: there was a problem with the license of this product." You restart the computer and restart production

  I bought the Adobe Master Costume CS5.5 product packaging a few years back and today I get the following message appears: "Configuration Error: there was a problem with the license of this product." You restart the computer, and restart the product. Error 213:19 ".

  That was before Adobe moved to a payment structure based on participants. I need to be able to access these programs. Please provide a solution to the problem.

  order to C:\ProgramData\Adobe & C:\ProgramData\Adobe\SLStore folders full reapply administrators property back on the C:\ProgramData folder and then add everyone.

• OfficeJet Pro 8600 +. Error "there is a problem with the printer or the ink system... »

  OfficeJet Pro 8600 +.  Once we replaced the ink cartridges, our printer gives an error "there is a problem with the printer or the ink system.  Turn the printer off, then on.  If the problem persists, contact HP.  We've gone through the start/stop several times.  We also pulled back and ink cartridges in, in addition to taking the print head at.  I ran a diagnostic test download and it comes back with "unknown error (06).  Help, please!

  Thanks for your reply.  We exchanged all Costco ink cartridges and the printer seems to work very well at this point.  Yes, we did all of the print head and cartridge cleanings.  Nothing seemed to help.

• Error - there is a problem with the external Setup program and it must be closed when you try to install windows updates

  Original title: How can I fix external MSI?

  When I try to download the updates, the error message says there is a problem with the external Setup program and it must be closed.  Updates will not be installed.  Anyone know how to solve this problem...?

  Hi John,.

  ·         You are able to install other applications on the computer?

  It seems to be a problem with the corruption of the .net framework. I suggest trying to repair the .net framework on the computer and see if you can install the updates.

  http://support.Microsoft.com/kb/923100

  Hope the helps of information.

• Why can't I save a file changed due to problems with the properties?

  Vista Home Premium 64-bit

  I sent myself a JPG file, taken by a camera in the email.

  I backed up, & then tried to turn it using Windows Photo Gallery.

  He says: 'cannot save this image due to a problem with the properties of the file.'.

  Sometimes (once, so far), it then says 'Changes to the labels, legend, side, or date taken could not be saved in this file.'.

  When I try the same thing in Windows Explorer, it says "you cannot rotate this image.  The file may be used or open in another program or file or folder can be read-onlly. ».

  Properties file shows the file read-only.

  Unchecking that and apply or OK has no effect.

  Ditto for the folder.

  But looking around, I see that (sometimes (?)) other records are also marked read-only, but are not their files.

  When I produce-> properties-> details-> ' properties delete and personal information "->" create a copy with all deleted properties ", he says: 'an error occurred when writing the property 'Altitude' in the file <....>.'.

  I can't find another way to try to remove all the ((maybe) offend them) properties.

  Hello PMH232!

  Thanks for the return of the response.  Below, I have included a few steps to try.  When you fill out these test in Windows Explorer and see if you can rotate the images.

  1. click on the start menu.
  2. click on computer.
  3. right click on the drive that gives you trouble.
  4. Select Properties.
  5. click on the Security tab.
  6. click on the Edit button where it says "to change permissions, click on change."
  7. in the "group or user names", click on the user you want to change.

  8. in the area 'Permissions for the users', click the checkbox to allow full control.
  9. click on ok.

  Please let us know status.

• Photosmart 7520 error: there is a problem with the printer. Turn the printer off, then on.

  I have a photosmart 7520 affected by the following issues.

  Issue #1: randomly, all lights start flashing market and the screen reads the following:

  Error. There is a problem with the printer. Turn the printer off, then on.

  I can't find a move that throws this to happen.

  #2 problem: When the printer is turned on and slowed down, also at RANDOM times, the printer will "Ding" followed by the flashing light wireless. So what sounds like the cartridges are cleaned, then a sound like the charger spinning or the printhead full running followed from one side to the other, then ending with a "Ding" and then back to normal.

  When this happens, the wireless connection is disconnected and then reconnected. Also, this disables the "Scan to computer" function on all computers on the network and manually requires the reactivation of all.

  From what I can tell the printer restarts itself.

  It is plugged directly into the wall outlet, no surge protector.

  Technical support has already go through the stages of the print head, me up to the top of the chain and eventually replaced the printer with a new brand.

  THE NEW PRINTER STILL DOES THINGS AS PRECEDENT.

  This printer is connected wireless to router Netgear N900. My all current computers running Windows 7, all are on the same network and workgroup and all are running Mcafee Total Protection.

  If someone is or has experienced the same or similar problems, I could sure use help.

  Solved myself.

• Satellite A660 - message: WARNING: a problem with the cooling system

  My laptop recenly started giving the error "Warning: a problem with the cooling system has been detected." Please turn off computer immediately and return it for service"- Yes the fan had stopped working and touchpad area was hot.

  So I take it on the type of service (toshiba) and must answer for fan, Mo, HARD drive, he said. Is this possible? -J' I have extended warranty, but is ' t it much? not to mention that it takes a month to get things down.

  He also mentioned that I could use the machine with a cooling pad until then if I wish.

  Any feed back?

  > Yes the fan had stopped working and touchpad area was hot.

  In this case, there is really a hardware problem.
  But I m wondering why he should replace the HARD drive and the motherboard
  Perhaps only the cooling module began at malfunction of course this is just a speculation
  If the technician has checked the material, then they need to know what parts are not OK.
  So don t think you have no choice.

  But the guarantee is valid for all is free

• We get an error "there is a problem with the device' while trying to use it on the computer of Windows 8

  Sir... my model of computation used is ASUS Q500A and I also have the problem with my may even of them I also perform step u said in this forum, but may not work... my Windows I have used is windows 8. Please help me tnx

  Separated from -.

  https://answers.Microsoft.com/en-us/Windows/Forum/windows_8-hardware/getting-an-error-theres-a-problem-with-your-camera/9c494984-1178-4C3F-884c-80ac750d3fa6

  Hello

  Thanks for posting your query in Microsoft Community.

  This problem is usually caused due to hardware or driver related issues. I suggest you try to install the latest drivers for the camera on the Asus or Windows Update site and check if it helps.

  If the problem persists, then it would be better to contact Asus for more help on this issue. As this could be a problem with the hardware as well.

  Support from Asus: http://www.support.asus.com/

  Please do not hesitate to visit our Web site for any help with the Windows operating system.

• How can I fix mf_status.exe error messages when you click on the button stop?

  • The exact error message:

  The instruction at 0x00000000 referenced memory at 0x00000000. The memory could not be read.

  Click on OK to terminate the program.

  • Operating system Version &:

  Windows 7 Home Premium

  Service Pack 1

  System manufacturer: TOSHIBA

  Model: Notebook

  Note: 4.1 Windows Experience Index

  Processor: AMD Athlon (TM) II Dual-Core Processor 2.10 GHz

  Installed memory (RAM): 4.00 GB (usable 3.74)

  System type: 64-bit Operating System

  Pen and touch: no pen or press enter is available for this view

  • Version of the browser &

  Internet Explore 10

  Version: 10.0.9200.16540

  • No software or hardware that I recently installed or deleted

            MediaFire Express BETA for Windows

  Version: 0.15.4.4888

  • Any recent changes I made to the system

  I accidentally click the disk wiper in CCleaner. Does this affect my system?

  • The things that you have already tried to solve the problem

  http://www.pcmaxutilities.com/wikidllfiles/mfstatus-exe-error-fix-Guide.html

  I also downloaded: MFStatus.exe files repair tool

  Any help will be much appreciated. Thank you! :-)

  Hey Ken, COLIENNE,.
  Let me to interfere here because I met the same problem, and I followed method 1 suggested by jojo.
  And the problem comes from MediaFire Express, even if it is not in beta for me.
  Windows Vista SP2.
  Hope I helped a bit...
  Sincerely,
  Bertrand

• How can I reinstall Windows xp when there is a problem with the driver cd?

  When I turn on my pc, there is a message ; there is no disc in the drive.

  It's really annoying, and in addition, Cd driver can read nothing.
  

  and to make things worse, it freezes often.
  

  I want to reinstall the program; but I don't know what I have to do without cd.
  

  Thank you for your help.
  

  Hello

  I suggest you to follow these steps and check if that helps:

  Method 1:
  Start the computer in safe mode and check if you get the same error message:

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/boot_failsafe.mspx?mfr=true

  Method 2:

  Try to perform the clean boot and check if it helps:

  http://support.Microsoft.com/kb/310353

  NOTE: When you are finished troubleshooting, make sure that restore you the computer mode normal startup such as suggested in the article above.

  Check if that helps.

• OfficeJet Pro 6835: Error: there is a problem with the printhead

  I see that the only recourse for all those who, so far, should be under warranty.

  We rarely use the printer, if the error occurred when he was one month, per week and five days out of warranty.

  Someone has managed to speak to give them some satisfaction?

  Obviously, it is a known issue with this printer, and we would he probably discovered (only used a set of cartridges so far - as I said, it is not so much) if we had given him more difficult to use.

  Thanks in advance.

  Don.
  Pavilion Media Center a1610n
  128 MB nVidia onboard graphics card
  Windows XP SP3
  1 GB of memory (about to extend to 4 GB)
  Hitachi 250 GB HD sister

  Hi @WestofYouLB,

  Welcome to the Forums of HP Support!

  I see that your printer HP Officejet 6830 reports a "print head problem. I would be pleased to direct to the correct Department to help you. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  I understand how this must be frustrating for you, because you don't use the printer very often.

  Due to the nature of the error message on printer HP Officejet 6830, I highly recommend contacting HP to see what your options are.

  Contact HP for service in all countries except Asia-Pacific.
  What you can do, is to use the following link to create yourself a file number, then call and it can help to expedite the appeal process:
  Step 1. Open the link: www.hp.com/contacthp/
  Step 2. Enter the product number or select Auto detection
  Step 3. Scroll up to "still need help? Fill out the form to select your contact options.
  Step 4. Scroll down and click on: contact HP options - click Get phone number
  File number and phone number are displayed.

  Please reply to this message with the results. I can't wait to hear strings attached good luck!

• Why my computer keep stop inadvertently with this message: address a problem with the NVIDIA Graphics Driver__NVIDIA graphics driver has stopped working properly. ? __

  Recently my computer (laptop) was stopped when I put the command "sleep".  It displays a message about my NVIDIA Graphics Driver does not. I have check the driver to use and it shows like th emost current and NVIDIA hardware works correctly... who is not lying.

  A recent Microsoft update would be the cause of this problem suddenly?

  Try a system restore to a Date before the problem began:

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  http://www.windowsvistauserguide.com/system_restore.htm

  Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://www.Vistax64.com/tutorials/63567-power-options-sleep-mode-problems.HTML?filter [11] = power % 20Management

  Read the info on sleep disorders in the tutorial above.

  http://www.Vistax64.com/tutorials/198047-power-plan-restore-default-settings.html

  Also read this tutorial; as well as the 'related links' at the bottom of the links above.

  See you soon.

  Mick Murphy - Microsoft partner

• Qosmio G20 error message: problem with the cooling system has been detected

  I'm trying to fix a Qosmio G20 (which is about 3 years old, it is no longer in warranty).

  Error message: Warning: a problem with the cooling system has been detected.

  I managed to remove the outer case and observe the operation of the machine, and basically one of the fans does not at all. The fan which is closest to the power connector seems to work very well (he seems to be turning a lot, do not know if this is normal), but the other fan who does not seem to move at all.

  When I put in place the case and on the machine, I noticed after a few minutes the vent of the fan working heat sink had warm enough, while led the non-working fan remained cool.

  I cleaned the fan from dust and have also changed the BIOS battery mode mode high performance, but the problem still exists.

  I would be grateful if someone could give advice if the problem is the fan or something else.

  If the fan is the problem, where I can buy a: i live in the United Kingdom?

  Hello

  I think there might be something wrong with the cooling module and the replacement would be necessary.
  Usually, this should be done by an authorized provider (ASP) in your country.

  Technicians could replace it with a new part and also could renew the thermal grease which is placed between the module and the CPU cooling.

  So contact the ASP in your country and ask for later handling.

  By the way; also, you can buy the cooling of the ASP module!

  Good luck

• ERROR MESSAGE HP6700 - PROBLEM WITH THE PRINTER OR INK SYSTEM CONTACT HP

  I JUST BOUGHT A HP OFFICEJET 6700 (LESS THAN 1 WEEK), THE PROBLEM OF PRINTER OR INK SYSTEM MESSAGE, TURN PRINTER OFF THEN WE IF THE PROBLEM CONTINUES CONTACT HP. IS DISPLAYED ON THE PRINTER SCREEN. I DID EVERYTHING SUGGESTED, AND MORE MORE, BUT THIS CUSTOM MESSAGE CLEARLY.  ALL DIAGNOSES OF THE PRINTER THE PRINTER IS FINE.  THE OPERATING SYSTEM IS WINDOWS 7.

  Mahamoud,
  Your article made a walkthrough basic troubleshooting, ending with the question if the print head is repairable. Because it is not on the 6700, the article isn't really the problem.
  
  Here is the solution I found to this problem:
  I discovered that eliminating all ink cartridges allows the printer at startup (although there is a message saying the missing print cartridges).
  Putting the cartridges in a binary regression revealed that the ink has been bad. (In my case, I only got the message of failure/printer ink when the yellow cartridge was in the printer).
  Replacement of the restored cartridge the printer functionality.
  That's the good news.
  Now the bad news: for HP.
  The generic error message indicates a failure with the printer or the ink system. No differentiation. With the electronics in the cartridges (that the client pays a high price for), looks that HP could not understand how to indicate a cartridge problem. This error message is not only unnecessary, but misleading. The printer indicates only a power reset and then contact HP. There is no indication that he might be a cartridge problem, not to mention what cartridge has failed. By the way, my customer encountered this problem when you replace the color cartridges. The cartridge failed was a new replacement.
  All of the web enabled features, fax, scanning features, print included with this printer are not very useful if the user can't get the dang thing to print.
  Another problem with this printer, is that, even when you only print in b & W, the printer uses little color (ostensibly make Blacks more "BOLD"). Then, finally, a color cartridge will go low or empty, even if only B & W printing. And guess what, you can't continue to print n & B if one of the color cartridges are out of ink. Thus, HP... How is this useful printer in an office environment, where most print tends to be B & W?

  (I would add; the solution in the message of failure/printer ink cartridge cannot fix your problem if, in fact, there are a few default printer. But if the problem is in the ink system, then the troubleshooting cartridge can help you).
  I have posted similar comments on Amazon, for this printer, in the subject line: shame on you, HP.

• How can I change the size of a photo book without changing the theme

  How can I change the size of a photo on iphoto book without changing the theme?

  Click the button change theme and in the next window, select a different size without changing the theme.

  

  Be sure to carefully check each page as with a different size, you may have questions of text, or all text in the text boxes.  Before ordering the book read it again according to this document from Apple: get an overview of a project on paper in Photos, iPhoto or Aperture to avoid problems - Support Apple. Save the PDF file to compare it to the printed version when it arrives.