Can't connect to 192.168.1.1 for the reset

Similar Questions

• Can't connect to 192.168.1.1 what so ever please help!

  I tried to reinstall my printer (I used to have it put in place to print wireless from my lap top and my top of office that are the same brand names both run Windows Vista) the other day, my printer went on the fritz kept saying can not establish connection

  So I uninstalled and went to reinstall using the floppy disk, Got to the section to make it wireless and he wants a network key, I put what I thought, I changed it to and he was wrong

  I went and typed the IP address in the address bar that is supposed to take me to my Page of Linksys and it just sits there white saying white screen in the lower left corner (the lap top use Fire Fox 3 version), so I went to the high counter to the page that uses the new Internet Explorer , put the same IP address in in a first time, I was getting "page not found" or the Page cannot be displayed errors

  then he crosses, but he gave me nothing but the search results for the IP address that he's not going to the Linksys page as it is supposed to

  It's the IP address I'm typing in the address bar (as in all of THE Web sites and help sections on this site says to use) 192.168.1.1 I even tried another I.P. address on my computer and nothing

  I need the network key for my printer connected wireless and it gets me upset, I tried at least 3 days!

  None of sections help helped here, the help of cat live wasn't any help and I can't find the disc, I just moved and you don't know where it is, but I spent the last 3 hours searching boxes that I still unpacking.

  my router is the wrt54g Linksys V. 6

  Can someone help me I need my printer to the top and work A.S.A.P

  What router are you using?

  To view the web pages of the router:

  Use Internet Explorer, it usually works.
  JavaScript must be enabled.
  Use a computer that is connected to the router.
  In the non-working computer, temporarily disable your firewall software.

  If you use Zone Alarm, do a right-click on the ZA icon in the taskbar (bottom right of screen) then click on "Shutdown ZoneAlarm" and see if that solves your problem. If this does not work, try the following with Zone Alarm: open the control center ZAISS, go to privacy, then temporarily disable Ad Blocking and Cookie Control and see if it solves your problem.

  If you use Noton Internet Security with the add-on Pack, don't forget to disable the blocker and ad blocker. Some users have reported that they needed to uninstall all Norton Add-on Pack.

  If you can not get anything to 192.168.1.1 then perhaps this is not the address of the router. Go to 'Start' > all programs > Accessories > command prompt.
  A black DOS window will appear. Type "ipconfig" (with no quotes), and press the Enter key. Look at the "default gateway". It is 192.168.1.1? Point your browser to the 'default gateway', can connect you to your router.

  If the above fails, unplug your modem router, then try again. If it solves your problem, then you probably a "modem-router" rather than a regular modem. Check if your modem-router "" uses the same address as your Linksys router 192.168.1.x space. If this is the case, then the report with this problem and also specify the brand and model of your modem router.

  If all above fails them, turn off your entire system, unplug it from the wall, wait a minute, then lights up, then try again.

  If all the above tips fail, then reset the default router: power down the router and unplug all the wires. Wait a minute. Switch on the router, let it fully boot (1-2 minutes), then press and hold the reset for 30 seconds button, then release the button and allow the router to reset and restart (2-3 minutes). Turn off the router. Wait a minute. To connect to a computer, cable, a router's LAN port. Initialize the system. It should work.

  If the reset does not fix your system, then you must download and install (or reinstall) the latest firmware for your router. After the update of the firmware, you must reset the default router, and then configure the router again from scratch. If you have saved a router configuration file, DO NOT use it.

  If you still have problems, make account, including the brand and exact model of your modem (not the Linksys router) number, your ISP and model and the version of your router.  Also, please indicate your operating system.

• While the I Pad that is in use reaches 100 percent of the charge can keep connected to 100% without any problems for the battery?

  When you use the I Pad while loading it can I continue to use 100% connected without no battery problem?

  Yes. Of course.  Why any company would do a device that would be damaged by keeping plugged?

• How can I connect HP ENVY 110 d411a (white) for the MacBook Pro OSX Lion running through a wi - fi connection?

  And how can I use the AirPrint.

  (I'm not English, sorry for my bad English)

  1.

  Hello

  I bought a HP ENVY 110 d411a (white) on the last day, but I have different problems trying to configure it.

  I did all the settings of the printer and properly installed the CD rom on 2 PC running Windows XP. (All works) I also tried the ePrint and it works without problem.

  Problems come when I tried to implement it in my book for Mac OSX Lion running. I downloaded the "ENVY-110 - series_v12.14.0.dmg" from the HP site, but it seems that the computer cannot detect the printer wi - fi thorugh, even though they connect on the same wi - fi. Reading this forum I also installed an additional update "HP_Scan_for_Mac_OS_X_10.7_Update.dmg" and "support.apple.com/kb/DL907" Also I tried to unstall all and reinstall another time.

  I'm sure that the printer is on the same wi - fi, I know not wi - fi is active, because the other PC I can print and scan, I'm sure it has a regualr IP address, the printer is new (2 days) and my MacBook is updated to the latest firmware.

  What can I do else?

  2.

  My other question is how can I enable the AirPrint? I tried to detect the printer from the phone, but he can't find anything...

  I read that this requires an update of the printer, but I already checked the updates and it says that the latest firmware is already installed...

  Can you help at least with the first point?

  OK, thanks for that.  This problem is with your router.  Your Mac uses Hello (also called mDNS) to find your printer.  If the router does not support this, your Mac will never see it.  It is a common problem with routers provided by the ISP.

  I would recommend that you contact your ISP and either resolve the issue or give you a router that supports mDNS.  Last resort, you can get your own router and just use the modem from the ISP box part.

• can I connect a usb cable and wireless for the use of 2 separate computers to 1 photosmart 5514e.

  I want to be able to connect the USB to a desktop computer and run a wireless network connection to a top of the laptop. both are windows based PC

  Yes, you can install the printer via a USB port of a PC and the other on the wireless network, network and wireless should not interfere between them.

  Kind regards

  Shlomi

• can not access the router (192.168.1.1) of the browser firefox web

  When I try to access my RV042G Gigabit Dual WAN VPN router from firefox or chrome I get an error message

  > An error occurred during a connection to 192.168.1.1. SSL has received a low ephemeral Diffie-Hellman key in the handshake message exchange the server key. (Error code: ssl_error_weak_server_ephemeral_dh_key)

  I had a similar problem with the storage attached network (Synology Diskstation) unit but I was able to create a certificate that meets the "modern standards" and the problem was solved.

  I need to create a new certificate for the web server on the router RV042G?  How?

  FYI - running firmware 4.2.3.06

  Thank you

  Lee

  Hello Lawrence,.

  Thank you for using the small community of Support Business!

  It is a known problem that affects a number of products for small business. There is another post which lies here who has some solutions you can try.

  If you have any other questions, please post them here and I'll do my best to help you!

  Best,

  Taylor

• under vista and it cannot open the Web 192.168.1.1 for linksys router

  I have a Linksys wrt54gl router wireless and I hard wire plugged into my computer so I connected to the internet broadband router. Connections to work because the flashing lights on the front of the router blink correctly.  So I open internet explore and type 192.168.1.1 in the hope that I get the page for the router setting, but instead, I get a message that explore cannot detect the Web site. Wrong address. I get a similar error with Firefox.  The computer was working fine connected directly to the internet bandwidth so sure the internet works. The IP address is set to automatic detection. Someone at - it ideas?

  Hello

  Make sure that the software firewall on each computer allows free local traffic. If you use 3rd party Firewall on, Vista/XP Firewall Native should be disabled, and the active firewall has adjusted to your network numbers IP on what is sometimes called the Zone of confidence (see part 3 firewall instructions

  General example, http://www.ezlan.net/faq#trusted
  Please note that some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic. If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• How can I connect HDTV and LCD to PC using the two - as a dual monitor.

  I recently bought the PC HP Pavilion a6600f w1707 with HP. I also bought a DVI cable to HDMI to connect PC to Samsung HDTV. I can use the VGA cable to connect the monitor and cable DVI to HDMI to connect to HDTV, but log off for the other use. Is it possible to configure Windows Vista Home Premium to display on both screens at the same time, or at least be able to switch between the two without having to unplug one, then restart the computer?

  This can be annoying, but I've done it before.  Usually, you can connect at once, then go to the display panel, settings, advanced, and then there is usually a tab to select the components of the video card.  Mine says NVIDIA...  Once there, you can choose a number of options, for example, clone, extended desktop, etc..  I found that there is some problems with resolution when the display on my TV is over the current screen.

• can not connect to my HP Touchsmart. Maybe the wrong password.

  just bought a HP Touchsmart desktop computer. One of my friends came to be implemented and we did the admin username and password. now, I can not connect! I went from values around the thought of my friend may have put numbers in the wrong place and no luck. now, I can't even in the computer. all I see is the login screen. can someone help me please understand where and how I can recover my password?

  Hello

  sandrabermea wrote:

  just bought a HP Touchsmart desktop computer. One of my friends came to be implemented and we did the admin username and password. now, I can not connect! I went from values around the thought of my friend may have put numbers in the wrong place and no luck. now, I can't even in the computer. all I see is the login screen. can someone help me please understand where and how I can recover my password?

  If you have not installed anything, but then it's quite simple. Use the option of reset HP Recovery Managerfactory. That will return that your laptop is purchased condition.

  You can access the recovery at Startup Manager by pressing the F11 key immediately after pressing the power button on your laptop.

  Once you have recovered your laptop be sure to make a password reset disk or flash thumbdrive in Windows and put it somewhere safe.

  Here is a link to 11 other ways to reset the Windows password.

  Best regards
  ERICO

• Can I change name of team creative cloud for the team

  Can I change name of team creative cloud for the team? He now has a 24 digit alphanumeric name. In the video how the example is actually something readable.

  Hello

  Ask want you many to contact adobe for more information support:

  Contact the customer service

  * Be sure to stay connected with your Adobe ID before accessing the link above *.

• How can I make a cell formula will apply for the entire column? For example D2 appears B2 - C2. How can I copy this formula for each cell in the column?

  How can I make a cell formula will apply for the entire column? For example D2 appears B2 - C2. How can I copy this formula for each cell in the column?

  If you want the formula is the same (B2 - C2) in the cell of each column you must change it as ($B$ - 2$ C$ 2). Then copy it, select the whole column and paste.

• How can I change my mood Message in Skype for the Web?

  How can I change my mood message in Skype for the Web?

  People of good news: you can now change your mood message in Skype for the Web

  Just click on the picture at the top left of your profile, and then click the small icon of pencil next to the message of change in activity.

• How can I get a replacement adapter to recharge for the pencil of Apple?

  I've already lost my charger. How can I get a replacement adapter to recharge for the pencil of Apple?

  If you have lost, you have to pay for a new.

• How can I fix lines horizontal randomly and glitter for the LCD screens for HP Pavilion dv5 Vista?

  How can I correct random lines horizontal and glitter for the LCD screens for windows vista HP Pavilion dv5? Only, it happens randomly and can get all a few minutes at a time every few hours. The entire screen white and black and horizontal lines will appear during the flickering on the half top of the screen only. Nothing else changes. My sound is immutable, and none of my screens change the size or location. However, they may appear up and down during the flashing. Can someone give me an idea of what is wrong? I looked on Google for possible corrections, but most of them seem to be for refresh rate and I don't have a notch for this and can't change it according to the steps they offer.

  Read my initial response on what it takes to please.

  "See if this helps you:

  These lines indicate corruption graphics driver or lack of graphic material.

  Go to the HP Web site > Search a drivers and download article > search your laptop model number > your operating system > drivers for it: either video / graphic / Chipset (according to the wording it) > download and install the drivers.

  http://WWW8.HP.com/us/en/support-drivers.html

  If that fixed it, it seems to me be a problem of graphic material.

  Because it's a laptop; If under warranty, contact HP.

  If is not under warranty, contact a repair shop, local. »

  See you soon.

• Where can I find documentation users manual or product for the HP 2311xi monitor?

  Where can I find documentation users manual or product for the HP 2311xi monitor?

  The only documentation that I could find was the specifications for the HP 2311xi IPS LED backlit LCD monitor. I hope this helps.