can't control my voice through speakers when recording on windows vista
Compaq presario cq60 notebook. Can I record my voice without problem, but I can't monitor levels to be either too loud or too soft. I've read dozens of forums and keep running in circles. My table of mixing does not even an option to do so. All devices are enabled and display. I have no line showing as many forums saying I should have under part recording of sounds. You are using windows vista. I want to say is 'I can't hear my voice through my speakers or headphones while I record. What I've read, it's a fairly common problem.
Hello
Method 1:
Open the troubleshooting of Audio recording (also applies to Windows Vista)
http://Windows.Microsoft.com/en-us/Windows7/open-the-recording-audio-Troubleshooter
Method 2:
To adjust the record volume, follow these steps before you register:
1. click on Start, click on Control Panel.
2. click on hardware and sound.
3 under his, click Manage audio devices .
4. click on the recording tab.
5. click on the microphone device and then click Properties.
6. click on the tab levels move the slider to increase or decrease the volume.
If you find difficulties in following the above steps then you must follow the link below.
The volume of the audio recorded by sound recorder in Windows Vista or in Windows 7 is lower than that of Windows XP.
http://support.Microsoft.com/kb/973446
Hope this information is useful.
Tags: Windows
Similar Questions
-
How can I remove DLL run error messages when I start windows vista
C:\users\karen\vloadB6.dll and
C:\users\karen\Appdata\roamimg\MICROS~1\windows\STARTM~1\programs\startup\SCANPD~1.dll
Suffice to say that the specified module could not be found.
whatdoes the eman, what do these messages and how to delete results?
Thank you
Hello
"vloadB6.dll" is Malware.
You Antivirus can be removed but left a start for her entry.
Download, install, update and scan your system with the free version of Malwarebytes AntiMalware, if necessary in Mode safe mode with networking:
http://www.Malwarebytes.org/products/malwarebytes_free
And here's how to go in Safe Mode options; Select safe mode with networking from the list of options:
http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode
If the problem persists after that, remove them starting.
"How to use MSCONFIG in Windows Vista"
http://netsquirrel.com/Msconfig/msconfig_vista.html
Or the program Autoruns for FREE:
"V11.21 Autoruns for Windows"
http://TechNet.Microsoft.com/en-us/sysinternals/bb963902
See you soon.
-
How can I get my voice recognition to work on my windows vista computer?
I tried to set up my recgonition voice for the first time and it worked for a minute, but when I pluged in my helmet a screen come ask me different questions. I thought that I said it's all good but now I can't get my speech recognition to work. Can someone take me through step by step how to make this work? I am disabled and really need speech recognition if possible.
Thank you
Hi llspokes,
1. do you get an error message?
I suggest to try the steps from the link to the following article and check to see if it helps:
Troubleshoot speech recognition
Also, take a look at the link to the following article:
I hope this helps.
-
How can I get the media which has been recorded on Windows Vista to play on Windows XP?
Hello Forum... I would like to download/copy of the video programs & TV on my external drive seagate, primarily from my friends laptop, so I check it plays ok. When I get home it will not play on my Win XP Pro and just freezes my laptop, is there a fix or somethink for Win Vista Home Premium so that it works with my laptop Win XP Pro... Thanking you, yours sincerely, liam k
I'm surprised VLC didn't work... I wonder if you
a problem with your video driver. This may have a
Update. In some rare cases updates automatic in Windows
will install a video driver that is incompatible with
your system than the one you already had. In this case...
a system restore driver or the restoration is expected to dissipate it.Reduce the hardware acceleration of your chart may
be worth a try:How to put in back of graphics hardware acceleration
http://www.pptfaq.com/FAQ00129_How_to_set_graphics_hardware_acceleration_back.htm
(scroll down to: "If you are using Windows 2000 or XP")
(try to move the cursor notches 4 (everything except left
the last of them))If they improve the question, you should look for the
site Web of MFG. your video card
a updated driver Win XP compatible video. Or...
If your computer is a laptop... Search support
site of the manufacturer of your computer.Improvement or not... don't forget to return the cursor
to full.In any case...
If you drag and drop the. AVI on the following utility... it
will tell you if it's a DivX file or possibly a Xvid file.GSpot Super quick start
http://www.headbands.com/GSpot/v26x/Quick_Start.html (FWIW... it's always a good idea to create a system)
Restore point before installing software or updates)* Proceed at your own risk *.
DivX Codec
http://www.free-codecs.com/DivX_download.htm XviD Codec
http://www.free-codecs.com/download/xvid_codec.htmGood luck...
-
Get the error code 0x80070426 and a black screen when recording in Windows Vista
Original title: Error Code 0x80070426? __
I have tried to connect with windows vista but had a black screen with the box in the middle that says error code 0x80070426
Hi henry90909,
See the instructions below thanks Darin Smith MS:
If you do not have access to the Start button:
1) click computer access with reduced functionality
(2) a browser will open, type:%windir%\system32 in the address field
(3) find the cmd.exe file
(4) make a right click on the cmd.exe and select run as administrator
(5) type: net start slsvc
I hope this helps!
Debra
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think -
When you install windows vista service Park 1, I have received an error code 80073712 with 13% downloaded only?. Can you help me to complete this process?
Hi Gore EzekiahTongun
You can see the steps in the below mentioned article Microsoft and verification.
http://support.Microsoft.com/kb/947366
I hope this helps.
-
I can't move files from one folder to another on Windows Vista.
Hello
I can't move files from one folder to another in windows Vista.It is quite frustrating.I am an administrator of the account.I get an error saying that I don't have permission to do the action.It is said: Destination folder access denied. You need permission to perform this action. Then the buttons 'Try Again' and 'Cancel '.Help, please!Here is a link to an image of the error I get when I try to move a file:Thank youJeremyExplorer
Explorer (explorer.exe) is the program that is the start menu and taskbar, windows folder and the office (which is a folder window).
To see if a fix is available
In Control Panel (and select Classic discovered in the left pane) select reports on the problems and Solutions (problem of type in the START search box), go to historical problem, right-click of your error and choose check for the Solution.
You can also right-click and choose Details for more information. Post these details here. The name of the Module fault is important information.
If the problem affects Panel press the Windows key + R and type wercon (or type it at a command prompt).
Close the browser and start a command prompt
- Close Windows Explorer
- Start - All Programs - Accessories - right on command prompt and choose run as administrator.
- Click Start. Ctrl + Shift + Right-click on an empty spot (just above the power of buttons is one place) then Exit Explorer.
- Press Ctrl + Alt + Delete then Task Manager.
- Control all processes to explore are closed. On the process tab select explore and right-click and choose end process, repeat if more of an Explorer in the list.
Then to restart the Explorer after trying all of the following
- Press Ctrl + Alt + Delete and choose Task Manager
- In the Task Manager, click the file menu and then click new task (run) and enter explorer
If you cannot start the Explorer at all
- Press Ctrl + Alt + Delete and choose Task Manager
- Under the processes tab, click Show processes from all users to elevate to administrator
- In the Task Manager, click the file menu and then click new task (run) and type cmd
- Other things you can try typing
Explorer
Explorer c:\
Explorer/e, c:\
wercon
control
Iexplore
Rstrui
If you cannot start a folder window you can use the Browse button in the new task dialog. Don't forget that you must right click and choose Open rather than double-clicking.
Reregister the shell registry entries
It is important that each order is accepted. If the command fails it means the file is damaged and must be repaired.
Close the Explorer like above and then type at the command prompt (or copy and paste by clicking in the command prompt window and choose Paste).
regsvr32 /i shell32
regsvr32 /i urlmon.dll
regsvr32 RPCRT4.dll
regsvr32 PROPSYS.dll
regsvr32 MSCTF.dll
regsvr32 cscui.dll
regsvr32 rsaenh.dll
regsvr32 timedate.cpl
regsvr32 ATL DLL
regsvr32 OLEACC.dll
regsvr32 actxprxy.dll
regsvr32 USERENV.dll
regsvr32 msshsq.dll
regsvr32 NaturalLanguage6.dll
regsvr32 thumbcache.dll
regsvr32 WINTRUST.dll
regsvr32 MMDevAPI.DLL
regsvr32 audioses.dll
regsvr32 audioeng.dll
regsvr32 ExplorerFrame.dll
regsvr32 msi.dll
regsvr32 FirewallAPI.dll
regsvr32 netshell.dll
regsvr32 pnidui.dll
regsvr32 QUtil.dll
regsvr32 c:\windows\system32\wpdshserviceobj.dll
regsvr32 WINHTTP.dll
regsvr32 C:\windows\system32\qagent.dll
regsvr32 C:\windows\system32\portabledeviceapi.dll
regsvr32 wbemprox.dll
regsvr32 wbemsvc.dll
regsvr32 fastprox.dll
regsvr32 imapi2.dll
regsvr32 wshext.dll
regsvr32 gameux.dll
regsvr32 msxml6.dll
regsvr32 vbscript.dll
regsvr32 jscript.dll
regsvr32 wshext.dll
regsvr32 wshom.ocx
regsvr32 wshcon.dll
regsvr32 scrrun.dllDelete the folder and the settings of the Menu
This will remove the settings are saved for each file that you visit. Also the order of the start menu.
Close the Explorer like above and then type at the command prompt (or copy and paste by clicking in the command prompt window and choose Paste).
Reg delete "HKCU\Software\Classes\Local Settings\Software\Microsoft\Windows\Shell" /f
Reg delete "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\Streams" /f
Reg delete "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\StuckRects2" /f
Reg delete "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\MenuOrder" /f
Delete the thumbnail and icon Caches
Close the Explorer like above and then type at the command prompt (or copy and paste by clicking in the command prompt window and choose Paste).
attrib - r s h '% userprofile%\AppData\Local\*.db '.
del "% userprofile%\AppData\Local\*.db".
Disable thumbnails and previews
Damaged documents and particularly corrupt pictures or videos, can cause Explorer crash all trying to generate a thumbnail or an overview. This miniature and previews active option off.
If you can start the Explorer, previews is Union on the command - folder and Search Options - framework of tasks use classic Windows foldersbar.
Thumbnails are organized on the command bar - folder and Search Options - view tab - and check under Advanced settings - always show icons, never thumbnails and uncheck Show icon file in the pictures.
If you cannot start the Explorer close Explorer as above and then type at the command prompt (or copy and paste by clicking in the command prompt window and choose Paste).
Tracking Add "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\Advanced" v "IconsOnly" /t Reg_DWord /d 00000001 f
Tracking Add "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\Advanced" v "ShowPreviewHandlers" /t Reg_DWord /d 00000000 f
Tracking Add "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\Advanced" v "ShowTypeOverlay" /t Reg_DWord /d 00000000 f
Turn around after testing the Explorer.
Tracking Add "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\Advanced" v "IconsOnly" /t Reg_DWord /d 00000000 f
Tracking Add "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\Advanced" v "ShowPreviewHandlers" /t Reg_DWord /d 00000001 f
Tracking Add "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\Advanced" v "ShowTypeOverlay" /t Reg_DWord /d 00000001 f
A boot is a way to explore
It can be caused by a shell extension.
Explorer (explorer.exe) is the program that is the start menu and taskbar, windows folder and the office (which is a folder window).
The Explorer is built on addin programs called Extensions of Shell. The standard is provided by Microsoft, but programs add their own.
- Download Autoruns http://technet.microsoft.com/en-us/sysinternals/bb963902.aspx
- Close Windows Explorer
- Start Autoruns by right-clicking and choose run as administrator
- Click on the menu Options - Filter Options and check hide Microsoft entries and disable include empty locations
- Go to the Explorer tab and uncheck everything to the left.
- Click Start. Ctrl + Shift + Right-click on an empty spot (just above the power of buttons is one place) then Exit Explorer.
- Press Ctrl + Alt + Delete and choose Task Manager. Control all processes to explore are closed. On the process tab select explore and right-click and choose end process, repeat if more of an Explorer in the list.
- Click the file menu and then click new task (run) and enter explorer
If this can help, reactivate ½ at a time to identify those who. If this does not help, restart AutoRuns and go to the all tab and uncheck everything that it and restart. If this can help, reactivate ½ at a time to identify those who.
Run Microsoft Fixit
Microsoft has a range of automatic programs to solve common problems. To see problems explore
http://support.Microsoft.com/mats/windows_file_and_folder_diag/en-us
For the visit of the list the most comprehensive
http://support.Microsoft.com/FixIt/en-us
When you choose to download, choose the option to run on another computer. You can then save it to your hard drive. Open the folder, open the folder fix this laptop and run Run Fix It. It will contain all 27 FixIt.
Recycle BinIf the problem is the trash bin remove the storage folders. It will be automatically re-created next time you delete a file or open the Recycle Bin. It will remove the trash and the files it contains for all users.Close the Explorer like above and then type at the command prompt (or copy and paste by clicking in the command prompt window and choose Paste).RD C:\$RECYCLE. BIN/s/qthen repeat for each drive to change the drive letter, for exampled:\$recycle Rd. BIN/s/qe:\$recycle Rd. BIN/s/qIf the Office does not startThis will create a new empty by user and common desktop computer. This will allow to test if a file on your desktop to start the Explorer.Close the Explorer like above and then type at the command prompt (or copy and paste by clicking in the command prompt window and choose Paste).MD "% userprofile%\DesktopTest".Add reg "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders" / v/t desktop REG_EXPAND_SZ /d "% USERPROFILE%\DesktopTest" /fMD "% public%\desktopTest".Tracking Add "HKLM\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders" v "Common Desktop" REG_EXPAND_SZ /d "% Public%\DesktopTest" t fTo restore default after having tested if begins to explore.Set ExpFix1 = % userSet ExpFix2 = % profilereg add "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders" / v/t desktop REG_EXPAND_SZ /d "% ". ' ExpFix1 ExpFix2%% \Desktop "/fSet ExpFix1 = % PubSet ExpFix2 = % licreg add "HKLM\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders" /v "Common Desktop" /t REG_EXPAND_SZ /d "% ". ' ExpFix1 ExpFix2%% \Desktop "/fYou will need to disconnect then. -
When activating my windows vista ultimate product, I get the response that the license key is already in use, let me know how to solve this problem?
KiranS Hello,
Judging by your post, it seems that Microsoft had technical problems when you tried to activate your copy of Vista by phone. Have you tried phoning the line Activation again?
The normal procedure is that if the activation fails through the automated system, the call is transferred to a real person. It is the only available option if you get the error 'use existing product key'.
I can only suggest that you try again the activation by phone and see what happens.
This forum post is my own opinion and does not necessarily reflect the opinion or the opinion of Microsoft, its employees or other MVPS.
John Barnett MVP: Windows XP Expert associated with: Windows Expert - consumer: www.winuser.co.uk | vistasupport.mvps.org | xphelpandsupport.mvps.org | www.silversurfer-Guide.com
-
How can I get a driver for printer Canon I455 (my windows vista 32)
How can I get a driver for printer Canon I455 (my windows vista 32)
You can get this support from Canon... If they chose to take over the device in the given operating system.
Looking at the Website of Canon's Support for this printer and select your operating system, they * sentence * support with your particular operating system.
"This software is a module that extends the functionality of the printer driver for Canon inkjet printers. Your printer must be installed through Microsoft Update before you download and use this module. »
So, basically install you by choosing to look on the Microsoft Update site when you try to install the driver. It will download one Cannon gave to Microsoft after the release of Windows Vista. Then, you restart and download the other file (on-site support) to give you more features.
-
How can I get around having to sign into my account (Windows Vista 7) during startup as I forgat my password?
Hello Bob Zientak,.
If a password is required to log on your system, then you won't be able to cirumvent it. Unfortunately the users of this forum are also not allowed to suggest ways to help you bypass (hack) the password (3668Microsoft Terms and Conditions).
Remember passwords are case sensitive so maybe that you type a password in the case of bad? Did you create a password recovery disk when you created your password first? If Yes, then you must insert the password recovery disk to allow you to change the current password. If you did not create a password recovery disk then the next and more radical, opion is to re - install Windows.
This forum post is my own opinion and does not necessarily reflect the opinion or the opinion of Microsoft, its employees or other MVPS.
John Barnett MVP: Windows XP Expert associated with: Windows Expert - consumer: www.winuser.co.uk | vistasupport.mvps.org | xphelpandsupport.mvps.org | www.silversurfer-Guide.com
-
When I installed Windows Vista Ultimate oracle virtualbox has stopped working?
I use Windows Vista Ultimate ISO in Oracle Virtualbox but when I install Windows Vista Ultimate Edition, Oracle VirtualBox is stopped working,:(, que dois_je faire?) my other operating systems in Oracle Virtualbox is very well.
Hi Obito,
The question you posted would be better suited on the Oracle Forums.
http://www.Oracle.com/technetwork/Server-storage/VirtualBox/community/index.html
https://www.VirtualBox.org/wiki/community
Let us know if you have other questions about Windows in the future. We will be happy to help you.
-
When I install Windows Vista it gets stuck on the end of the installation.
I use Dell Inspiron 1720.When I reinstall Windows Vista, it got stuck on the end of the installation.
Hello
I ask you why you reinstalled you may have an underlying problem do you stop.
This is the information of Dell for the use of their recovery partition:
And here's how to use their recovery disks:
If you have problems with the help of their recovery software, you will need to contact Dell:
http://support.Dell.com/support/index.aspx?c=us&CS=19&l=en&s=DHS& ~ CK = mn
Or try the Community Forums:
http://en.community.Dell.com/support-forums/default.aspx
See you soon.
-
where can I find the price of a product key for windows vista professional?
where can I find the price of a product key for windows vista professional?
Unfortunately, the editions of Windows Vista are no longer available for sale. You can buy Windows 7 from the Microsoft Store. Download and run the Windows 7 Upgrade Advisor and follow the recommendations contained in the report that it generates.
-
Windows Vista Home Basic to home premium compatibility
the recovery came with my compaq presario cq60 dx211 disks would work with windows vista home premium. the recovery disk, I was created when I had windows vista home basic.
How is - happen you to Vista Home Premium. No, they will reinstall Home Basic.
-
Moose title: How can I get the age of Mythology to work on windows vista
every time I put the disc in the computer installation screen dosnt pop up and nothing happens the disc passes just for a bit and stops, and the cursor hangs a bit and I can't get the disk to the computer unless I restart the computer
Hi rew55545,
(1) is this problem limited only to the age of Mythology disc?
(2) what version of the game you are trying to install?
Method 1: Run the fixit available in the link below and check if that makes a difference
Your CD or DVD drive cannot read or write media
http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us
Method 2: run the fixit available in the link below to resolve any problems with DVD player.Hardware devices do not work or are not detected in Windows
http://support.Microsoft.com/mats/hardware_device_problems/en-us
Method 3: Select the boot and then check if the problem persists
Follow step 1 in the link below,
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7Important: n ' forget not to put the computer to a normal startup follow step 7 in the link.
Maybe you are looking for
-
Fort disturbing hum - sound from the right rear of the screen. Brightness level affects the sound and it disappears to the brightness level of 100 (100%). It's perhaps Backlight Inverter? Pushing the monitor from back with the hand will be stifle thi
-
all our iPads (1 Air, 2 minis) fail looking for safari. When you try to type in search bar app closes instantly. However, as an option of bandage you can paste the text of the notebook and it works. We hope a solution will come from Apple soon
-
DV7-1019TX turn on automatically
OK, what I did wrong? I walk up in the morning and my DV7 itself lit during the night (after being in hibernation). Does not matter whether it runs on battery or plugged. I have not found any reference to auto - we in the manual or the forums. I'm so
-
Scan from the computer, not the Printer Wizard
I reinstalled the drivers for full features. I can't use the printer to scan to my office, I am only able to use the Printer Wizard. I was able to scan like this before and for some reason any during the last six months, I can't do it from the printe
-
How do I reinstall the old applications backed up using the backup recovery mgr software
I fell off my machine after reloading some files of the .NET framework. Because windows is more loaded, I used the HP recovery discs and made a backup complete both DVD and USB from my hard drive. Then I went ahead and allow the recovery disk refor