Can't erase my dvd rw more.

Similar Questions

• Are there more Styles of Menu custom that u can get to 7 DVD Maker window, then those who are pre determined for you in the list of menu styles?

  Are there more Styles of Menu custom that u can get to 7 DVD Maker window, then those who are pre determined for you in the list of menu styles?

  Hello SuperComicCollecter 101,

  Welcome to the Microsoft Answers Forum!

  You can't even download new menus/styles; You can then bring yourself with the SDK pack that you can download from the official website of Microsoft. It would be a bit complicated, but if you are good at programming you can use this SDK package. There are many online tutorials that will help you.

  Windows Movie Maker and Windows DVD Maker SDK:

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=db25c30a-44F4-4306-BE62-2f3b7ef3849f&displaylang=en

  After downloading this file, I suggest to install in compatibility mode, to do this, please follow the steps below

  Right click on the downloaded file > properties > click on the Compatibility tab > under compatibility mode > check the box run this program in compatibility mode for and select windows 7 in the drop-down list in the menu drop down and then apply the settings.

  I hope this information helps. Please get back to us if you have any other questions on this subject.

  Thanks and greetings
  Mir - Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• my cd/dvd is more listed on the computer and it will not play anything

  If I'm going to start the computer and then open cd/dvd is more listed also is absent from the menu equipment. I'm not a COMPUTER guru to take it easy with the answers. Thank you

  Hello

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• erase a DVD + RW

  I can't erase the info from a DVD + RW.   I have Windows Vista and the instructions to choose the tab remove after clicking on the drive that contains the CD does not work as there is NO option or tab to remove.         In addition, there NO option in the toolbar to "ERASE THIS DISC

  iHELP

  My burner will not let me just write more on the DVD + RW without me formatting or erase existing data first.

  I could not do that...

  Are you able to burn data until this DVD + RW at all on this "CD burner?  Technically, you shouldn't be able to with this above optical drive...

  How about you, you go into Device Manager and note what type of optical drive, you have in your response.

  Press on + hold the Windows key + Pause/break all buttons.  That will launch the System Properties window.  Look at theDevice Manager and look for the readers of CD/DVD-ROM (or something like that).

• How to erase a DVD - RW - macOS Sierra

  Hello

  I can find the option how to erase a DVD - RW on macOS Sierra.

  Hold down the Ctrl key and click the CD or DVD drive in the side bar of the Finder, and choose erase the rewritable disc in the context menu no longer works.

  It is stil works on OS X El Capitan as Apple describe here ☞ OS X El Capitan: burn CD and DVD

  Thanks in advance.

  Try disk utility, select the DVD in the box and click clear.

• I can't erase unnecessary files on my Mac Pro by pressing option, command, and then J.  Help, please.  Thank you

  I can't erase useless files more pressing option, command, and then J.  Help, please.  Thank you

  option, command, and then J is not listed as a shortcut KB

  here:

  Keyboard shortcuts in Mac - Apple Support

• How can I erase my browser?

  I don't know how to clear browser search

  Many issues of the site can be caused by corrupted cookies or cache. To try to solve these problems, the first step is to clear cookies and cache.
  The Firefox cache temporarily stores images, scripts and other parts of websites while you browse.
  
  Note: This will be you temporarily disconnect all sites, you're connected to.
  To clear the cache and cookies, follow these steps:

  1. Tap the top right menu. It is the icon with 3 bars. On older Android devices, you will need to press menu hardware key, and then click more.
  2. Press settings.
  3. After that, you will pass to the settings screen. In the display settings, look under the privacy and security section, and then select clear private data.
  4. You will then pass a list of which can be erased. Select the 2 following for deletion:
     • Cookies & active connections
     • Cache
  5. After they have been selected, press the clear data button to actually clear the cache and cookies.

  This will help you with your problems? Please let us know!

• How can I erase the Awesome bar?

  I followed the instructions provided by Mozilla.
  IT DOES NOT WORK.
  No matter what I do, if I type in the bar location... also called the address bar... also called the Awesome bar... should have been called the useless bar... old sites Web will show that I have not visited in more than a year.
  Even if I clear my history every day.
  Yes, I select AS my calendar.
  Yes, I click AND DOWNLOAD the HISTORY of NAVIGATION.
  Still, whenever I type anything in the bar of Useless, old sites Web is suggested.
  How can I erase this and never make it do this again?
  How can I get the guy who designed the bar pulled Useless?

  (On another note... why I have to provide a password of eight letters at least 1 number? If I want a weak password, MY risk. What do you care? Also, if every Web site requests a password of eight letters at least 1 number you are actually makes it easier to hack because I am limited on coming up with new personal passwords for me since I have to remember and you make it so complicated.)

  Hello

  To disable the address bar to not display search history results. You can do this by going to Firefox-> Options-> privacy and select the option that says: "when you use the location bar suggest" and set it to "nothing". I have attached a screenshot that might make it easy for you to locate.

  I hope this helps.

• When I opened the window "save the Page under", the drop-down box file name indicates the files that have been saved a long time ago. It is not cleared by a function 'clear history' that I can find. How can I erase this?

  1. Question

  When I opened the window "save the Page under", the drop-down box file name indicates the files that have been saved a long time ago. It is not cleared by a function 'clear history' that I can find. How can I erase this?

  Hello.

  I think this is a related issue of Windows, because it is the Manager to save the windows file that we are talking about here (right?). You should contact Microsoft for help with this one, I think. You expect to be able to delete entries simply by touching delete on your keyboard when they are concentrated (that is how it goes for the removal of the form entries specific autocomplete in Firefox), but I have not tried.

  I'm sorry I can't be more helpful.

• Re: Satellite L300 - Media palyer can not read the DVD

  Can anyone help?

  Have just implemented a L300 and everything was going well until I decided to try a prerecorded DVD. All I get is a message that reads... Windows Media Player cannot play the DVD because no compatible decoder is not installed on your computer. I do have it connected to the internet if that makes a difference.

  Can someone explain what it means all and what to do. All new at this game!

  Thank you
  Dorothy

  Hello

  I think that you need to install a pack of codecs for Windows media player play DVD. I have good experiences with K-Lite Mega Codec Pack. Use Google to find, it contains the essential codecs for Windows Media Player.

  But let me give you a piece of advice: try to play DVDs with another room. I always use the VLC media player because it can play audio and video files more. In addition he s freeware and in my opinion more quickly as media player.
  Check it!

  Welcome them

• Satellite M40: Power calibration error - drive cannot burn DVD - RW more

  My drive is a carpet * an oem UJ - 831S. After a screw-up partitioning job, I had to format my HD and reinstall Windows XP... and then I can not burn DVD - RW more.

  Tried many programs such as Nero and a fireman, gives an error of calibration of power from the beginning.
  Burning CD - r and CD - RW no problem however, and I can read CDs and DVDs of movies very well.

  Google and searched for a month without success, tried to blow the laser lens, but there is no dust, I tried different media, etc. I know the best answer is that the drive is done, BUT I refuse to acknowledge it because it is too big of a coincedence to stop working right after that I reinstalled XP.

  An interesting note however, my laptop has not been provided with a CD of Toshiba, so I had to reinstall manually more drivers by downloading the Toshiba site, so I have a funny feeling, this could be a thing of the software/firmware, or even a framework.

  I installed the new firmware 1.02 for the reader as well. I don't remember what the firmware was before resettlement, IE the laptop computer settings to factory default, I'd like to downgrade to 1.00 if possible.

  Experts have ideas? And is there a way I can reset the firmware?

  Maybe I could remove the drive from the system-> devices and let XP Reinstall for me?

  Hello

  > I don't know the best answer is that the drive is done, BUT I refuse to acknowledge it because it is too big of a coincidence to stop working right after that I reinstalled XP.

  Of course, it s simply to say the drive is dead because everything looks like a hardware malfunction. Most often the power calibration error appears because of the drive lens can't calibrate in the right position and thus cannot read some CD or DVD s s or it of not possible to write about them.

  But maybe you are a lucky man and might try this procedure:
  -Try to remove the drive physically from the Bay for laptop
  -Restart the unit without the drive
  -In this case the operating system should start from the HARD drive
  -Close the notebook then reinsert the drive unit in the Bay of s for laptop
  During initialization, the laptop should recognize the drive and must pick up the firmware

  Then you can check if you can burn the DVD again, otherwise you will need a new drive

• How can I erase whatever it is associated with to Brother DCP-1200. It was added by mistake. I need to erase all the files on my computer related to Brother DCP-1200

  How can I erase whatever it is associated with to Brother DCP-1200.  It was added by mistake. I need to erase all the files on my computer related to Brother DCP-1200?

  You uninstall it?

  I could only partially uninstall the printer. It is not to add printers & devices more. It is not in the list of program. But he is still using a driver. Therefore, I can't fix it just delete it from the Driver list. I don't know anything else to do. Can you give me any suggestions? It makes my computer thinks that it must be installed. JoAnn

• How can I erase hard disk dive

  How can I erase diving hard drive that windows will not open on

  "Wiping" a hard drive can not be done from Windows, if you are referring to the drive on which Windows is installed, so that Windows will not open is not a problem.

  You must use a utility that sits on its own bootable media.  Two of the most popular free tools are

  DBAN--> http://dban.org/download

  Active KillDisk--> http://www.killdisk.com/features.htm

  Although the two products have free or commercial versions, the free version of KillDisk has a few more features (for example, works on the SSD, it's not the DBAN).

• I can't play my DVD on my DVD player. I get a message that says: "disk is incompatible." How to burn a DVD compatible with DVD players?

  Original title: DVD burning

  I successfully burned a DVD of a film I made with moviemaker that I can still play on older versions of Windows, but I can't play my DVD on my DVD player.  I get a message that says: "disk is incompatible."  How to burn a DVD compatible with DVD players?

  Hello Angels3cma,

  Thank you for posting.  It seems that you were doing data DVD discs.  To burn DVDs to be compatible with the DVD player, you will need to make DVD-video disc.  I have listed the steps below to make DVD-video disc in Windows DVD Maker.  These same steps are be typing "How to burn a movie on a DVD" in Help and Support found by pressing the button Start/Orb you Windows desktop.

  Burn a DVD-video disc

  You can create DVDs quickly and easily using Windows DVD creation. You can add videos, photos and audio, make slide shows for your DVD, or add your Windows Movie Maker projects. Once you add files, you can burn your DVD with a single click, or, if you prefer, you can choose from several styles of menu and the slide show options to make your special DVD before you burn, or customize your DVD menus and write the DVD menu text yourself.

  After you create a DVD, you can play the DVD on a DVD player and watch your movies and slide shows on TV. The following steps explain how to use creation of Windows DVD to burn a DVD.

  To open Windows DVD Maker

  • Click Start, click all programs, and then click Windows DVD creation.

    Note

    • You can also open Windows DVD Maker by inserting a DVD recordable or rewritable Virgin in your DVD burner. When the AutoPlay dialog appears automatically, click on burn a DVD video disc using Windows DVD creation.

  To add and mix and match the elements on a DVD

  1. On sharing your memories on a DVD page, click Choose photos and videos.

  2. Do one of the following on the Add pictures and video to the DVD page:

     • Click Add items. Find and select the video files, photos, and files in project Windows Movie Maker that you want to add to your DVD, and then click Add.

     • Click file and then click Open project file. Find the folder that contains a project file creation of Windows DVD that you want to use for your DVD, click the project for creating Windows DVD file, and then click Open.

       You can also click Add items to add additional items to the DVD after opening a Windows DVD project file.

  3. To arrange items and specify the order in which the different items will play from the DVD, click on the video, photo or slide show that you want to move, then click on go up or down. You can also move items by dragging upwards or downwards in the list.

  4. To remove an item from the DVD, select the item you want to remove, and then click on remove items.

  Choose a DVD burner and enter a DVD title

  1. If you have more than one DVD burner installed on your computer, on the add pictures and video to the DVD page, select the DVD burner that you want to use from the DVD burner list.

  2. If you want to set different options for your DVD, click Options. For more information about the different options you can specify when burning a DVD, see Change DVD-video settings.

  3. Click the disc title box, and then type a title for the DVD.

  To change the text of a menu for your DVD

  1. Once you have added all of your files and chosen the burner and title, click Next.

  2. To customize the text for the DVD menu, click Menu text, and then do one or more of the following:

  • Click on the police box and then select the font for the text of the menu.

  • Click the font color, bold or italic buttons to select the font color and formatting.

  • In the disc title box, type the title that you want to use for your DVD.

  • In the Play button box, type a label for the button that plays your DVD.

  • In the scenes button box, type a label for the button that displays the different scenes on the DVD.

  • In the area of the button notes, type a label for the button that shows all the notes you enter for the DVD.

  • In the comments box, type any notes that you want to appear on your DVD.

    Notes button and Notes page only appear on the DVD if you include information in these fields.

  • Click on the text to change.

  Tip

  • You can see a static preview of your settings in the preview to the right of the display pane. Alternatively, to see how the menu text will display when you burn your DVD, click Preview.

  To customize the menu for your DVD style

  1. To customize the style of menu for your DVD, click one of the styles of DVD menu along the right side of the screen, or click the Customize menu, and then do one or more of the following:

     • Click on the police box and select a font.

     • Click the font color, bold or italic buttons to select the font color and formatting.

     • If you have chosen a style of menu with the two in the foreground and background video options, near foreground video, click Browse, locate the video that you want to appear in the foreground and then click Open.

     • To have a picture or video appear as background for the main menu of the DVD, near background video, click Browse, locate the video that you want to appear in the background, and then click Open.

     • To add a digital media audio file to play as background music, while the menu for your DVD, near audio menu, click Browse, locate the audio file you want to use, and then click Open.

     • Click the scenes button styles box, and then select the shape of the buttons scenes on your DVD.

     • If you want to see the menu as it will appear when you play your DVD, click Preview.

  2. If you want to save the DVD menu custom settings as a new DVD menu style, click Save as new style. In the name of Style name box, type a name for the custom menu style, and then click OK. You can then choose to use this DVD menu style custom for the current DVD and for other DVDs you create using Windows DVD creation.

  3. If you have not saved the style as a new style, click Change Style to save the changes you made for this DVD and to return to the previous page.

  Choose a slide show on the DVD settings

  1. To set the settings of the picture for the slide show on your DVD, click slide show.

  2. On the change your slide show settings page, do one or more of the following:

     • Click Add music, locate the music files you want to add, and then click Open.

     • Depending on the length and the slide show's settings, you can add additional audio files. To do this, repeat the previous step.

     • If you added more than one audio file and you want to change the order in which the music files play in the slide show, click an audio file that you want to move and then click on move up or move down.

     • To remove an audio file in the list, in the music for slide show list, select the audio file, and then click on remove.

     • To change the length of the slide show automatically so that it corresponds to the duration of the music that you have added, select the Change slide show length to match music length check box.

• To specify the duration for each picture to display in the slide show, select the duration (in seconds) in the length of the picture box.

• To choose the kind of transitions to use between pictures, select a transition type in the Transition area.

• To add effects, Pan and zoom to the pictures you include in your slide show, click on use the Pan and zoom for images effects.

• Click Change slide show to save the changes you made and to go to the previous page.

To burn your DVD

1. When you have finished adding files and customize your DVD menus, click on burn.

2. After the DVD disc burned successfully, you can do one or more of the following operations on your disc is ready page:

   • To make another copy of the current DVD, remove the completed DVD, insert a new recordable DVD, and then click on create another copy of this disc.

   • To finish creating Windows DVD, click Close.

Please let me know if this helps you to Zack
Engineer Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• my laptop stop save my movies for windows and I can't burn a dvd eithier

  my laptop stop save my movies for windows and I can't burn a dvd eithier

  Hi handyman6810,

  Can you give us more details about your film, about saving?

  For your problem of DVD burning, you can also take a look at the article with information here.

  Thank you!