Can't find existing printer on the wireless network

Similar Questions

• OfficeJet 6700 cannot find the printer on the wireless network

  Printer is connected to my wireless network.

  Print diagnostic shows PASS for everything and I have ip (DHCP 192.168.2.19)

  The printer is able to connect to the internet to download updates and pull content for apps (colouring etc...)

  I disabled my firewall of windows to resolve the problems, but the HP software was listed as exceptions anyway.

  Using the printer on my computer connection wizard I entered both the IP address and the host name but it is "impossible to find the printer.

  My router is a netgear WNDR3700.

  The ssid that I am connected is good.  I have a network of both comments, but it does not broadcast its ssid and I am not connected to it.

  I am getting very frustrated.  I'm tech-saavy and it should be much easier than this.

  I wonder if anyone else encountered this problem and can anyone offer suggestions?

  Thanks in advance...

  Hi mbelsey,

  By following the steps below resets the defaults on the printer. Reconnect the printer to the wireless network using the address assigned to the router DHCP. Once you have connected it to try to access the EWS and Ping the printer. Let me know what you find?

  First step: restore the default settings of network on your product

   

• How can I add a printer to my wireless network

  How can I add a printer to my wireless network

  John

  I assume that you have a wireless printer. If so, the software is different from each manufacturer, but it is similar to this. Before starting the installation, make sure that you have a USB cable at your fingertips and you know your network name (SSID) and wireless key. Install the software and follow the prompts to set up the connection Wireless for the first time. Once it has been set up you can unplug the USB cable.

  The USB cable is not required on subsequent computers, simply install the software and follow the prompts on the screen of an additional computer (or similar wording). You may need to enter an SSID and Wi - Fi key, after which the printer must be accounted for.

• A computer is visible on the network, but I can't find another computer on the home network.

  Networking troubleshooting maxed out. Need help

  2 running XP Pro Machines on the same network home. At the Working Group under the same name. Check the properties of LAN connection sharing to share. My firewall except for sharing/printer. PING was successful at both. A computer is visible on the network, BUT I can't find another computer on the home network. Any help would be appreciated.

  Hello

  Check if you are able to access the computer.

  (a) press the Windows key + R.

  (b) type the name of the other computer in the open: box in this format:

  \\computer

  (c) press on enter

  You can also try the steps of troubleshooting provided in the link below.

  How to troubleshoot a network home in Windows XP

  http://support.Microsoft.com/kb/308007

  See also;

  Network map doesn't display your Windows XP computers

  http://TechNet.Microsoft.com/en-us/library/cc754938 (WS.10) .aspx

• HP Photosmart B109: cannot connect the printer to the wireless network

  I have some setting wrong my printer for wireless printing. It has worked well in the past, but with my new macbook air - this isn't.

  I can't access the function where to add the printer to the wireless network (my router does not support WPS so his password WPA).

  I remember setting this up on a PC - easy with the driver provided by HP, but on the Mac, the configuration tool does not appear to be a function where I add the printer to the wireless network - and HP did not provide a driver, because it is supposed to work with the mac built-in software.

  The manual says only: "follow the instructions on the screen", but the printer does not have instructions on how to connect - on-screen tests, only that it is connected...

  Anyone who knows how to add the printer to a wireless network?

  Hello @Joahkim!

  Welcome to the HP community!

  I understand that you have a problem to set up all-in-one printer wireless HP Photosmart (B109n) with your new MacBook Air OS x 10.10. I want to help you with this.

  Have you changed your router or your password since the MacBook Air? If this is not the case, your printer can still be connected to the network and the trickiest part of that place will be done for us already.

  We will print a Network Configuration report to see if it is connected:

  • On the Control Panel, press the button next to Scan. The Scan/Wireless menu.

• I am refurbishing a Pavillion m7560n and I can't find a driver for the local network. Can you help me? CC = en

  I am refurbishing a Pavillion m7560n and I can't find a driver for the local network. Can you help me?

  Here is the link to the LAN of your system drivers:

  http://ftp.HP.com/pub/softlib/Software7/COL15134/ob-40490-1/sp26744.exe

• Cannot find the printer on the wireless network

  My new 6500 a 710n-z printer copier copies very well.  Also, it detects the wireless network and is given an address 169.254.182.35.  I have reset the router several times using the WPS button.  But after I installed the software on my netbook ACER Windows XP, the computer cannot find the printer.  I spent three days trying to get the $% # ^ & * to work.  I see in some documents to get a 169.254. IP address, so I'm probably not connected?  But what to do?

  Well Yes, a 169.254 IP address... is auto-assignée when he can't get one from the router.  The WPS button does not reset the router.

  Do this on the printer: Setup > network > Wireless Setup Wizard. Follow the instructions.

• OfficeJet 4620 3-in-1 printer will not print on the wireless network

  Have updated my Mac OSX to Yosemite (10.10), & now the 4620 Officejet will not see my WiFi network.  Have already uninstalled & reinstalled, used USB and installation CD.  Restarted the router also.  The printer went as far "Retore System Defaults".  Any suggestions?

  THX

  Hi @tomiet,

  Welcome to the HP Forums!

  I see that your HP Officejet 4620 will print on your wireless network, using Mac OS X 10.10. I'm sorry to hear that, but I'm happy to help you!

  I recommend trying an installation installation of Wireless USB. Please consult this guide, convert a wireless USB connected printer. In addition, this video can help as well, Configuration of wireless USB printers.

  I hope this will solve your problem of connection and have a nice day!

• Can satellite M65-S9092 - I put the wireless network card?

  Hello

  Can I put my card Intel pro 2200BG on Satellite M65-S9092 wireless network so that it is no longer compatible with Windows 7? The Intel Pro 2200BG is no longer supported by Intel as it was abandoned and so they have not issued a new driver so that IPv6 works.

  So I would update my card if possible.

  Thanks in adavnce

  Concerning
  Paul

  Hello

  I think that it shouldn't be a problem to upgrade the WLan card.
  As far as I know its a card wireless network of miiPCI and you would need to also use a WLan card which would support the miniPCI interface.

  The wireless network card supports two pins for the WLan antenna cable.
  Usually, you must connect a white cable to the HAND and a black to the auxiliary voltage

  All that s

• Misplaced installation CD, can not reconnect the printer to the wireless network

  Recently, I replaced my router, which forced me to re-setup my home network. A consequence of this is now my HP Officejet Pro does not connect on the radio I searched up and down to the CD without a bit of luck. Is there another way to connect my printer to the network?

  Thank you

  Aaron

  First replace your router you should not have to reinstall the software.  Try here.

  Replacement of your wireless router try here.

  http://www.HP.com/global/au/en/wireless/reconfiguring-system-Help3.html

  If you think that your driver and software are watered, download the installation set up files on the web site of HP.

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?product=4323659 & CC = US & DLC = in & LC =

• My TimeCapsule airport can not find my printer via the USB port

  Hello.

  I have a HP Laserjet cp1215.

  I had to reset my TimeCapsule because my Xbox has an update and will not connect to internet.

  Then theres no reaction when I connect my printer to the TimeCapsule.

  Any ideas?

  Thank you

  When you reset the TC which settings you changed?

  Have a different IP address?

  Remove the printer to the computer and start the installation... If the TC changes IP it can mess up the connection.

  In the contrary case, we need a lot more info about what happened and your entire network. Printers can be extremely difficult to get running... the end plug it into a computer as it was designed to be... A USB printer is not network... and no USB print server cannot overcome the fundamental nature of the printer... It is designed for local use. Ultimately, that he will always give you problems.

• You can print wireless from a laptop to an HP DJ3520e not to add the printer to the wireless network?

  Is it possible to just wireless printing from the computer directly to the printer without joining the printer to the network?  If so, how?

  Thank you so much erico.  I tried and was able to print.  Well done!

• Printing from a PC to a printer on the wireless network wireless cable

  My Photosmart 7520/25 is on my wireless network that uses a Netgear router.

  How can I print to this printer, using a PC running Vista Business Desktop computer that is connected to the router?

  The printer is connected to the network and trying to set up the connection/print drivers on the PC, the printer is never "found".

  I have no problem to print on printer even my old laptop XP wireless.

  Tried a lot of things and not get the right settings or find the right key words to find the solution.

  To save time, I just bit the bullet and spent $25 for a wireless USB.

  Use the option "Direct print", voila! fact.

  When in doubt, go with the hardware solution...

• DeskJet Ink Advantage 3635: How can I connect my printer to my wireless network?

  I have a wireless set up and now I want to add a wireless printer. I using Chromebook and I would Google Cloud print. The model is consistent, but the device appears on the network. What can I do to reselove this problem? Thank you.

  Take a look at Chapter 7 of your User Guide.

  Page 67 begins the section "to connect the printer.  After that connect you the printer to the network successfully, try to use the HP on Chromebook print soft again.

  WyreNut

• CAN´t find other computers on the home network Windows.

  I have a home network windows already defined with two desktop with Windows XP and a laptop with Windows 2000. The computers are connected to a router with ethernet cables and the lap top wireless (WiFi) to the same router. Now, I'm trying to connect a fourth computer (a desk top) with Windows Vista. It works fine to connect to Internet, but I can't reach the other computers on the network. On other computers, I can see a 'new', but I don't see the others of a "new". Can someone help me with the configuration of the computer "Vista"?  Thanks in advance.  / Thomas

  Hello
   
  To home network computers running different versions of Windows, we need to make sure that what follows.
  a. ensure that all computers are in the same workgroup.
  (b) the value of the private network location type.
  c. open ports in your firewall to allow file and printer sharing.
  d. turn on additional file and printer sharing options.
  e. consider using password protected sharing.
  5 using the network card.
   
  The NIC in the network and sharing Center is a graphical view of the computers and devices on your network, showing how they are connected and including problem areas. A computer running Windows XP can be detected and appear on the network map, you may need to install the Protocol Link-Layer Topology Discovery (LLTD) on this computer.
   
  To install LLTD, visit the following link and download: http://support.microsoft.com/kb/922120
   
  For more information on the "networking running different versions of Windows' computers, visit the following link:
  http://Windows.Microsoft.com/en-us/Windows-Vista/Networking-home-computers-running-different-versions-of-Windows
   
  I hope this helps.
   
  Kind regards
  Syed V
  Answers from Microsoft supports the engineer.