Can't find the inventory after fresh install of VIO 2.5?
I installed successfully VIO 2.5 on a vCenter lab w / NSX 6.2.3 and waited two weeks to complete the deployment, and now vCenter cannot connect to the management server in VIO. The vApp and VMs (Manager and model) are running, and I can't SSH in Manager and can PING vCenter to SSH, but I can't ping of vCenter. It showed upward in vCenter and the VIO plug in seems to work, but he can't find the administration server, event though I can still select it from taking in. The only thing I see so far is that when I SSH in and try to use the viocli, I get an error message: cannot find the file inventory. OpenStack may not have yet been deployed. Since I have just installed the Server Manager only and stopped, I thought I would try to uninstall VIO and start over, but this procedure does not seem to be documented that I can come up with a plan b. thoughts? Thank you, dude64
I solve this problem I found that some of the clock of the ESXi host were not synchronized because they could not reach NTP. Once the clocks were synchronized, the problem disappeared. I attribute this to vCenter based SSO that everything in my laboratory is related to, but error messages and logs were not indicative of the root cause.
Tags: VMware
Similar Questions
-
where can I find the installation after that I bought
where can I find the installation after that I bought
There is no need to install anything.
You can just connect to "https://cloud.acrobat.com/convertpdf" using your Adobe ID credentials and try to create PDF or combing different files into a single PDF file.
Kind regards
Ana Maria
-
my computer can't find the path for windows install what I do to get it back
whenever I restart my computer, a box appears saying: it can not find the path for windows install and the box comes back to how to fix this
Hi Billy,
Try a clean boot (Vista and W7) http://support.microsoft.com/kb/929135. If the problem goes away then it's just a matter of tracking down the culprit at the origin of the problem. Follow the procedures described in the article. Once found, remove, delete, disable or uninstall. Once don't forget to reset your system back to the normal state, as described in the procedures. If the problem occurs in clean mode then just restore the system to normal and reboot - this solution will not work. If you are using XP, see http://support.microsoft.com/kb/310353 and http://support.microsoft.com/kb/316434.
I hope this helps.
Good luck!
-
I have can´t run the program after you install with creative cloud
Hello!
I have can´t run the program after you install with creative cloud, he do not appear the button to open it, but the status is installed, someonepeut help me with?
Can you tell me what operating system you are using (windows/Mac) and some data on your computer (RAM, card graph, 64 or 32 bit,...)?
-
I can't find the exe file to install manually.
My drive does not load ready for installation, I can't find the exe file to install manually. can anyone help please. Thank you very much.
-
Vision project of OR can not find the model after migrating to labview.
Hello
My problem is the following. I did a project with the vision Builder of NOR. Well, it works fine. BUT, when I migrate this labview project (and after that, I build an executable version) it can not find the model on the selected images. (Yes, I use the program with images, not with the camera.) What should I do? I tried to put the models next to this project, but it did not work.
-
HP M175NW can't find the scanner after installation of new
Hi all
IM new to the forum. Hope someone can help me with a problem I am facing. I use an iMac 27 "2012 model. Recently, I did a clean install of Mavericks and since updated 10.9.2 up-to-date. I lived an isssue where I would like to print a document, and then the printer would be considered as offline... I could still access the right web page. The only way to get around it was to restart the printer...
After a little research I have reset the system preferences print system and tried to reinstall the latest version of the software on the HP website. I got to the screen where I had to install a print queue... There was an alert on this page that said something about being taken in charge, but only for the hologram IP but I didn't really that much of a choice, because the printer is on an IP network...
.. in any case, I set up printing queue under the Protocol LPD to Jetadmin taken but the scanner is no longer there. This isn't to the utility capture image. The utility scan HP is installed but not visible there either.
If anyone has encountered this before?
Peter
Hello
Thank you for taking the time to answer. These are the same instructions that I took 3 or 4 times without success. I even tried to install the HP 10.8 software but had the same problem...
I however found a solution to my problem after a few hours of troubleshooting... The solution was much simpler. Is it turns out that Apple has updated the HP drivers that appear as an update of the system after you install the software. Once you install the update, you delete the printer and add it again. When you do you now have the option to install it as a Hello printer versus an IP printer... Once you do this, you will have scanning capabilities.
Hope that helps others out there
-
I like Firefox, but I spent a lot of time trying to find the download button to install on my new computer. Whaat I dominant, or someone forgot to include the download option?
Thank you. www.getfirefox.com me redirected for the Different page Design with no green button and more running, but the http://www.mozilla.org/firefox/all.html did the trick. Usually, I don't have problems. But this time I was puzzled. You are very fast. Thank you very much.
-
Inspiron 8000 &; Win XP - where can I find the drivers after upgrade HD?
I replaced Win98, ME, with Win XP last year and found XP drivers on the support site. Now I want to upgrade the HD the original 10 GB to 80 GB and I'll try cloning the old HD with Acronis True Image 11, but if it goes wrong, I'll do a clean reinstall of Win XP. Problem: support site now offers the drivers for all the operating systems (including Linux Redhat) - but is no longer for Win XP.
2 questions:
1. where can I find the necessary drivers now, if I have to reinstall Win XP from scratch?
2. is it possible to clone my old HD 10 GB for my Maxtor 320 GB external HDD and clone then down to the Maxtor for my new 80 GB HD?
Advice and guidance very much appreciated - thank you!
Inspiron 8000
512 MB of RAM
Win XP Home
External hard drive Maxtor 320
Acronis True Image 11
-
Sony vio can't find the camera after installing Windows 7
The system does not find the cam into my sony vio laptop once I upgraded from vista to window7
The system does not find the cam into my sony vio laptop once I upgraded from vista to window7
And Sony said they supported by your hardware that is found in this system in Windows 7 and they have drivers, that you can download for everything, right?
Looking for this, right?
Hardware support always has (probably will be always) come from the hardware manufacturer who has manufactured the product you are trying to use. Whether or not they provide the necessary software (drivers) for their device to be seen and used entirely (if at all) with a given operating system is (has always been) a decision * they * do. The manufacturer of the operating system (except if they are also hardware manufacturer) does not have this choice.
-
Card SD and photos - where can I find the pictures after I put it inside the slot smart media
I have a micro sd card in the regular sd card. I put it inside the smart desktop media slot and the little light turned green, where can I find photos?
Open computer and you should see a new drive letter. Can say new Drive X or X to removable disk, etc. Click on it.
-
I can't find the info bar or install the activeX control
I'm trying to update microsoft windows, and this happens every time. When I try to right click on where the information bar is supposed to be located,
under the address bar, it never shows me "click on Install ActiveX Control". Also, it does not I'm in the InfoBar area. I tried several times to complete this process and can not. How can I get this installed activeX control? Thank you
Install the ActiveX control required to view the site
The site is not correctly displayed on your computer without this control. To install it:1 right click on the Internet Explorer information bar. It is located just below the address bar.
2. in the context menu, click install ActiveX control.
3. in the security warning dialog box, click install.Note: If the information bar does not appear, or if you have installed the control but still cannot use the website to take these steps to solve the problem.
Example: Internet Explorer information with the menu barHello
1 did you do any hardware or software change before the show?
2. where you can install windows updates before?I suggest you try the steps mentioned below.
Method 1: Fix the term.
Troubleshoot Internet Explorer to IE quick, safe and stable:
http://support.Microsoft.com/mats/ie_performance_and_safety/If the problem persists, perform the following step.
Method 2: Optimize Internet Explorer and check to see if it helps.
How to optimize Internet Explorer:
http://support.Microsoft.com/kb/936213/roWarning: Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.
Hope this information is useful. -
Using Add or remove programs, I managed to get rid of my driver that allows me to play CDs or DVDs. It can be a small label that was a question mark yellow and multimedia written against it in my control panel, but he disappeared and I can find is no longer, if anyone can help please
If you are using XP, you should be able to fix it with a simple system restore running.
Reach:
Start-> all programs-> Accessories-> system-> system restore tools.Select the option "restore my computer to an earlier time." Click Next.
Find a date that was set a restore point that you deleted the audio driver. All the dates in bold you can restore.
Computer will restart and you should have his back.
Edit: you can also select the date to which he said you deleted the audio driver.
-
Can not access the updates after clean install of Windows 7 Pro
I have formatted my hard drive digital, preformed a clean install of Windows 7 Pro. Everything went well and OS seems to be properly authenticated.
The question is not able to 'find' updates. At startup, the message: NEW UPDATES AVAILABLE. When I check the updates, the process runs "forever" and never completes the process. The problem would be to my use of Office 2003? I have installed for messaging and Outlook calendar. Here's the MGADiag.exe diagnostic tests.
Diagnostic report (1.9.0027.0):
-----------------------------------------
Validation of Windows data-->
Validation code: 0
Validation caching Code online: n/a, hr = 0xc004f012
Windows product key: *-* - 96DXD - 3PDHD-FC6KT
Windows Product Key hash: FiWgfb/HBGU plus 7qzKd5NATMcX2iI
Windows product ID: 00371-OEM-9314963-39295
Windows product ID type: 8
Windows license type: COA SLP
The Windows OS version: 6.1.7601.2.00010100.1.0.048
ID: {0AC450E6-A3AD-405E-B244-B6074CECBF8A} (3)
Admin: Yes
TestCab: 0x0
LegitcheckControl ActiveX: N/a, hr = 0 x 80070002
Signed by: n/a, hr = 0 x 80070002
Product name: Windows 7 Professional
Architecture: 0 x 00000009
Build lab: 7601.win7sp1_gdr.130828 - 1532
TTS error:
Validation of diagnosis:
Resolution state: n/a
Given Vista WgaER-->
ThreatID (s): n/a, hr = 0 x 80070002
Version: N/a, hr = 0 x 80070002
Windows XP Notifications data-->
Cached result: n/a, hr = 0 x 80070002
File: No.
Version: N/a, hr = 0 x 80070002
WgaTray.exe signed by: n/a, hr = 0 x 80070002
WgaLogon.dll signed by: n/a, hr = 0 x 80070002
OGA Notifications data-->
Cached result: n/a, hr = 0 x 80070002
Version: N/a, hr = 0 x 80070002
OGAExec.exe signed by: n/a, hr = 0 x 80070002
OGAAddin.dll signed by: n/a, hr = 0 x 80070002
OGA data-->
Office status: 100 authentic
Microsoft Office Standard Edition 2003 - 100 authentic
OGA Version: N/a, 0 x 80070002
Signed by: n/a, hr = 0 x 80070002
Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3_E2AD56EA-765-d003_E2AD56EA-766-0_E2AD56EA-134-80004005_E2AD56EA-765-b01a_E2AD56EA-766-0_E2AD56EA-148-80004005_16E0B333-89-80004005_B4D0AA8B-1029-80004005
Data browser-->
Proxy settings: N/A
User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
Default browser: C:\Program Files (x 86) \Mozilla Firefox\firefox.exe
Download signed ActiveX controls: fast
Download unsigned ActiveX controls: disabled
Run ActiveX controls and plug-ins: allowed
Initialize and script ActiveX controls not marked as safe: disabled
Allow the Internet Explorer Webbrowser control scripts: disabled
Active scripting: allowed
Recognized ActiveX controls safe for scripting: allowed
Analysis of file data-->
[File mismatch: C:\Windows\system32\wat\watadminsvc.exe[Hr = 0 x 80070003]
[File mismatch: C:\Windows\system32\wat\npwatweb.dll[Hr = 0 x 80070003]
[File mismatch: C:\Windows\system32\wat\watux.exe[Hr = 0 x 80070003]
[File mismatch: C:\Windows\system32\wat\watweb.dll[Hr = 0 x 80070003]
Other data-->
Office details:
{0AC450E6-A3AD-405E-B244-B6074CECBF8A} 1.9.0027.0 6.1.7601.2.00010100.1.0.048 x 64 *-*-*-*-FC6KT 00371-OEM-9314963-39295 8 S-1-5-21-323565687-595391911-2700631585 Dell Inc.. Latitude D630 Dell Inc.. A16 20090714000000.000000 + 000DE083907018400FA 0409 0409 Mountain Standard Time(GMT-07:00) 0 3 DELL M08 100 100 Microsoft Office Standard Edition 2003 11 qQgWhuDYJMzZ2Ra9gyv5SUkXuJA = 70141-051-9705975-56000 1 960A2760EC8D866 Content Spsys.log: 0 x 80070002
License data-->
The software licensing service version: 6.1.7601.17514
Name: Windows 7 Professional edition
Description: operating system Windows - Windows (r) 7, channel OEM_COA_SLP
Activation ID: da22eadd-46dc-4056-a287-f5041c852470
ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
Extended PID: 00371-00186-149-639295-02-1033-7601.0000-0102016
Installation ID: 001986425316033083061411071895367413981866374930874720
Processor certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338
The machine certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339
Use license URL: http://go.microsoft.com/fwlink/?LinkID=88341
Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340
Partial product key: FC6KT
License status: licensed
Remaining Windows rearm count: 3
Trust time: 25/01/2016 10:58:11
Windows Activation Technologies-->
HrOffline: 0x00000000
HrOnline: n/a
Beyond: 0 x 0000000000000000
Event time stamp: n/a
ActiveX: Not registered - 0 x 80040154
The admin service: not registered - 0 x 80040154
Output beyond bitmask:
--> HWID data
Current HWID hash: NgAAAAEABAABAAIAAAABAAAAAwABAAEA6GGi4iOfPAyIevyQRoOYoLzXkIWCAxbA4Klv5iqF
Activation 1.0 data OEM-->
N/A
Activation 2.0 data OEM-->
BIOS valid for OA 2.0: Yes
Windows marker version: 0x0
OEMID and OEMTableID consistent: Yes
BIOS information:
ACPI Table name OEMID value OEMTableID value
REFERENCE DELL M08 APIC
FACP DELL M08
HPET DELL M08
MCFG DELL M08
ASF! REFERENCE DELL M08
TCPA
M08 DELL SLIC
SSDT PmRef CpuPm
Thank you in advance for any help you can provide.
Firecracker.DWR
You can reset the Windows Update components by running the Fixit on this page. But if there is malware present, she will continue to reset the connection to the update servers:
How to reset the Windows Update components
http://support.Microsoft.com/kb/971058
Suggest you download and save the Fixit. Then configure the system before the clean boot by running:
How to troubleshoot a problem by performing a clean boot in Windows Vista/Windows 7
http://support.Microsoft.com/kb/929135
Once the Fixit has been downloaded and the system is started in the pure State, check that the native Windows Firewall is now on if a 3rd party firewall has been used previously. Now run the Fixit and choose the default mode. Restart once it's done and see if the system can be connected to the update servers. If he can't, then rerun the Fixit and choose aggressive mode. Turn it back on when he finished the race and updates.
I suggest before you stop and install the updates, disconnect from the Internet, first.
I also recommend that download you and install Service Pack 3 for Office 2003, then look for updates in the Help menu.
-
I can't find the "Settings" folder to install the ACR presets
I have studied this many. Here are the following steps that I took:
On my hard drive > library > Application Support > Adobe > CameraRaw. So I know I'm supposed to go in the settings folder. But it is not a record of settings. «Just 'Adobe' 'camera' lens profiles "and an inaccessible".» DS_Store '.
Then I tried to 'save settings' on an image in Camera Raw and search on the file name, but I can't. BUT even if I'm in Camera Raw, 'Save settings', I see a Settings folder in CameraRaw > Adobe > Application Support > library. So I know that it is there. Can't seem to locate it in the finder or anything like that. Help, please.
I also did research that there may be some 'Hidden' on Mac files. SO I tried to follow the following instructions to view all folders:ter-3520878 http://www.macworld.co.uk/how-to/mac-software/how-show-hidden-files-in-mac-os-x-finder-fun /
And always without success. FROWNY FACE! Thank you in advance if you can save Me!
Hello
The folder of your choice: Camera Raw is in your library user, not the system.
An easy way to get to your user library is to click on your desktop, then in the menu go to press the option and you should see the words of library. It's your user library where you want to search ~/Library/Application Support/Adobe/CameraRaw
Maybe you are looking for
-
Channel 100 on airport Time Capsule
Is it possible to lock the channel 5 on channel 100 GHz in the United Kingdom? The 5th generation using 3 TB Time Capsule.
-
I have ios 9.2.1 on my iphone more than 6 s and my region is USA. The application of new appears in my Siri suggestions and I can use it from there, but it is not anywhere else on my phone. I'm afraid if she suggestions I won't be able to use it.
-
Error code 80240016 failed to update Windows Update
Hello I've recently noticed that I had problems installing anything new from microsoft. Last week, I tried to download internet explorer 8, but he repeated that the link was broken. Then I tried to download other things on the microsoft Web site, a
-
I get 656 error Code when I try to download my updates to the windows desktop.
I get 656 error Code when I try to download my updates to the windows desktop.
-
Join the nearest date "not used".
I need to join the following tables by the next date "not previously signed" the nearest:start_table:st_id start_dtstart031-dec-2014Start1January 3, 2015Start2January 5, 2015start3January 7, 2015Debut48 January 2015Debut5January 14, 2015end_table:end