Can't find the time capsule after changing access timed through iPhone app airport utility (setting: no access between 0130 to 0600). But I can not connect or find the same time capsule in the 0800.
Cannot find or connect to time capsule after you change the timed access thro iPhone app
You must have defined it incorrectly... factory reset and start again.
Give us a screenshot of the settings before you apply them.
Tags: Wireless
Similar Questions
-
I've set up another configuration of TCP/IP, but it does not connect. I need to access the 3 different machine networks. Any ideas?
original title: alternate tcp/ip
If by "alternate TCP/IP configuration" you mean the settings on this screen--> http://tinyurl.com/42kbqqz, then, to quote Inigo Montoya, "you keep using that Word. I don't think it means what you think it means. »
The 'alternative' configuration settings tab, if you select "IP address private auto" (APIPA) or "specified user" is only used IF "obtain an IP address automatically" is set on the tab 'General' (http://tinyurl.com/8p9hn) AND the adapter cannot get an IP from a DHCP server.
Most cable networks use a DHCP server to automatically assign IP addresses. In this case, just plug your Ethernet cable and you're automatically configured and connected.
If the problem is that your network requires a static IP address (that is, they use a DHCP server to automatically assign IP addresses), you will need a third-party network settings manager. If you have an IBM (Lenovo) ThinkPad, you can use "Dial-up connections." IBM Otherwise, see this Google search (I have no experience with any of the applications shown, so I can't comment about them): http://www.google.com/#sclient=psy&hl=en&source=hp&q=network+configuration+switcher&pbx=1&oq=network+configuration+switcher&aq=f&aqi=g-v5&aql=&gs_sm=e&gs_upl=23l1333l1l1599l12l8l0l0l0l5l278l1344l0.7.1l8l0&bav=on.2,or.r_gc.r_pw.&fp=74e371c96a48f4b&biw=1024&bih=649
-
After that I changed the apple ID password I can not connect to facetime
After that I changed the apple ID password, I can not connect to facetime
Update your password for Facetime, too.
-
I have a laptop with Windows XP. After getting a virus, I scanned with AVG and removed the threat. After re-booting, I can not connect to wireless internet. The icon shows "acquiring network address". I connected the router directly on laptop computer connected to the wireless network and still unable to connect. I tried to restore the system as well, but the message says "unable to restore the system, no changes were made. Help?
original title: acquisition of network addressHello, Steve.
Try this link below on how to reset IE and let me know if it helps. -
Help, I've changed the root ESXi via powerCli password, now I can not connect with the web client or the console, but I can still connect to powerCli. The command I used was;
SE connect-VIServer esxihostname-user root - password newpasswd
This production network btw, I have connected to each host and run the above command, these ESXi hosts are not on a domain
y at - it something I have left out. I really appreciate any assistance that you people can provide.
Thank you, Joe
It is probably a longshot, but a lot of things in the land of windows is not sensitive to capital letters as Unix is. I wonder if your new password you put through powerCLI mixed uppercase in it and if the capitalization was abandoned by command windows powerCLI Analyzer, or he interpreted as all capitals or something. If you can still get through the powerCLI you could try to reset the password again to something simple without capitalization mixed case and if your password on ESXi strategy requires a special character, try something different than a "$", like a "_" (I find that a '_' is less likely than some other special characters (, as a '-' or a ' / ' to cause problems with analyzers.).
Edit:
Another thing, you can try before playing with the password once again, is to create a different username ESXi using powerCLI and see if the password ends up what you think, it should be, and if you can get with the client vsphere using it. In this way, you can find out if there are some problems with certain characters or Cap through command powerCLI Analyzer without losing your remaining root by powerCLI access. After some tests, you can understand what went wrong with your initial password change and may be able to fix it with less risk of losing access. I also assume that you can not create a new username on ESXi who is able to change the root password no matter what authority give you it, otherwise, you could create a new username with PowerCLI, then connect to the client vsphere with it and change the password to root from there.
-
After having added THAT MSAD can not connect to the console
Hello
We have added a new security provider in weblogic (OBIEE 11 g), after rebooting the server, we can not connect to the weblogic console.
When we enter username and password, it crashes.
How do they get the security without connection provider in the console?
Thank you!Neal, you need the admin credentials to connect to the server and make the changes.
Because you can not even connect, it's the only way... If you want to make the changes for you can send me your config.xml file -
I just posted a question on the last update automatic 38.3.0 it is possible to log into different e-mail accounts in a profile, only the first e-mail account. My support mozilla account is linked to one of the email accounts that I can NOT connect to. Can't connect to this email account to check the issue. Your last 38.3.0 Thunderbird is useless because it is no longer possible to log in different e-mail accounts in a profile, and your support solution is useless because you need to connect to the e-mail account to check the issue.
How to proceed?You can change your email associated with your media profile.
I have 38.3.0 and I can access all my email accounts I suggest you try the initial tests:Start T-bird with disabled modules.
If it works on your module is to blame and you need to activate one by one.Start your operating system in safe mode with active network.
If it works probably your antivirus is blocking or delaying. (Or driver). -
Original title: just changed password an hour ago. I can not connect.
Password just changed an hour ago. I can not connect. I don't have a password reset disk. When I type the password and press ENTER, the next page says ' THE SERVICE PROFILE has NO logon USER. USER PROFILE CANNOT BE LOADED. »
HelloThis error can occur if the group policy setting "do not connect to users with temporary profiles" is configured.
Try to connect to your computer from another user account and follow the steps listed in the article below.
Check out the following link and follow the steps to solve the problem:
Error message when you log a computer Windows Vista-based or Windows 7 by using a temporary profile: "the user profile Service has no logon. Unable to load the user profile.
http://support.Microsoft.com/kb/947215Note: If you do not have any other user account the computer checks to see if you can boot to the desktop insafe mode , and then perform the steps listed.I hope this helps.Thank you, and in what concerns:
Shekhar S - Microsoft technical support.Visit our Microsoft answers feedback Forum and let us know what you think.
If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly. -
Network connection problem
Hi all
After cleanind my registry with Wise Registry Cleaner, I can not connect to the internet. Network LAN and wireless do not work. Windows 7 has diagnosed the problem and says the following:
There might be a problem with the driver for the wireless network connection card
Windows could not automatically bind the pile of IP protocol for the network card.
There might be a problem with the driver for the connection to the Local network map
Windows could not automatically bind the Protocol IP on the network card stack.
Details of detection
Diagnostic information (network card)
Network card diagnostics information:
Network adapter driver to connect to the Local network information:
Description... Broadcom NetLink (TM) Gigabit Ethernet
Reference the manufacturer... Broadcom
Provider of... Broadcom
Version... 14.0.1.0
The name of the INF file... C:\Windows\INF\oem5.inf
Date of the INF file... 14.05.2010 21:21:56
Name of the section... DEV_KEY2. NTamd64.6.1
Hardware ID... pci\ven_14e4 & dev_1692
Instance status indicators... 0x180200a
Status code from device Menager... 0
IfType......................... 6
Physical media type... 14
Similar to Wireless adapt. The problem is probably not the antivirus program, since I have only deinstaled and the problem persists. I've also uninstalled and reinstalled the drivers, but no solution again. I can't do a system restore point before cleaning the registry, because Windows could not find a file that is needed for the restore. I restored again since before saved registry cleaning but no help.
Any other ideas please. This really seems teribble :(
Thank you
Nikola
Hello
You can try all reset them TCP/IP and WINSOCK by this order from the high command prompt:
netsh winsock reset
netsh int ip reset log.txtHow to run the command prompt as administrator (high) is here:
http://Windows.Microsoft.com/en-us/Windows7/command-prompt-frequently-asked-questions
part:
How to run a command with elevated privileges?
LC
-
I want to change my MacBook, but I can not connect at all to my account. it won't even show the mask connection on page of adobes, safari keeps trying but it keeps research fail.: https://IMS-NA1.adobelogin.com/IMS/authorize/ ... but nothing happens. Not on my computer, not on the mobile phone. the same problem. Cookies are okay and I never had this problem before.
Hi Rahel,
Please see Creative Coud connection errors
Hope that helps!
Kind regards
Sheena
-
After that the virus can not connect to internet
My computer running Windows XP has been infected by a virus 'Alert system' fake who took over the office and hide all my files. I was able to restart in safe mode, run Malwarebytes and Microsoft Security Essentials to capture and remove some viruses. I was also able to display most of my files and desktop programs. (I also tried to do a system restore, but this doesn't seem to work). However, I can not connect to the INternet using Internet Explorer. I reset IE, but I can't always connect. It seems that IE starts to open the URL, but is then blocked somehow by the virus, which redirects to the default "diagnose the problem. The cables are connected and the Internet works. What other options are bypassing them that blocking and/or resettlement of IE.
The error you received seems to indicate that there is a need to reset Winsock. You could try running the FixIt program contained in this article, or the manual procedure:
"How to determine and recover Winsock2 corrupted in Windows Server 2003, Windows XP, and in Windows Vista"
<>http://support.Microsoft.com/kb/811259 >HTH,
JW -
I can not connect and it says failed to connect to the profile.
Hello
1st thing to try is the system in safe mode restore to before the problem
http://www.windowsvistauserguide.com/system_restore.htm
Windows Vista
Using the F8 method:
- Restart your computer.
- When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
- Select the Safe Mode option with the arrow keys.
- Then press enter on your keyboard to start mode without failure of Vista.
- To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
- Do whatever tasks you need and when you are done, reboot to return to normal mode.
If that does not solve it read more
read the tutorial below
When you log on a Windows Vista-based or a Windows 7 computer by using a temporary profile, you receive the following error message:
The user profile Service has not logon. User profile cannot be loaded.http://support.Microsoft.com/kb/947215#letmefixit
Your user profile was not loaded correctly! You have been logged on with a temporary profile.
http://support.Microsoft.com/kb/947242
If you tried to log on to Windows and received an error message telling you that your user profile is damaged, you can try to fix it. You will need to create a new profile and then copy the files from the existing to the new profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.
http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile
-
Unable to send emails, SMPT can not connect to the server
I use the latest version of the EL CAPTAIN 10.11.04, just updated software, and I can not send my emails is to show only SMTP error can not connect to the server.
I can receive emails, but cannot send emails. I deleted the account and reinstalled it once again changed the SMTP Port 25, 465, 993 trying all of them.
Please advice, or guide me what I am doing wrong, or what I can do to fix this error.
Please take each of the following steps that you have already tried, tests after each of them. Back up all data before making any changes.
Step 1
In the Mail menu bar, select
▹ Connection Doctor window
In the window that opens, double-click on behalf of SMTP (outgoing mail) problem. it. another window opens, displaying the list of all outgoing mail accounts. Choose the one that you clicked.
Select the Advanced tab in the settings for the account and check the box marked
Automatically detect and maintain the account settings
If it is not already done.
If there is more than one account of the problem, repeat. Close the window and save the changes.
Step 2
Open again the list of SMTP servers. Note the problem server settings, then click the sign button less to delete and confirm. Click on the sign more and recreate the account with the same settings.
If you use Gmail, remove the account completely in the preferences panel accounts Internet and re-create it. The option "detect and maintain" must be selected in advanced settings for the incoming mail account.
Messages will be again synchronized with the server automatically. Which can last for hours if the mailboxes are very large.
Step 3
Quit Mail runs. Launch the Keychain Access app and enter the name of the server of mail out in the search box. For example, if you use Gmail, enter
SMTP.gmail.com
Make a note of the password, and then delete the keychain items. The next time Mail connects to the server, it will prompt for the password. Enter and save the password in the keychain.
Step 4
If you use Gmail, sign in to your account on the site, and in the account settings, click the "Sign-in and security." There should be an option somewhere on the page to "allow applications that are less safe." Enable this option and save the change. Note: I don't use Gmail and I have not tested this solution myself. If it does not, either make you on Google user forums for help, stop trying to use Gmail with the e-mail, or just stop using Gmail altogether (strongly recommended).
The mail server can use a form low, obsolete encryption for secure communications with customers. Recent versions of Mac OS X has changed the behavior of Mail and other applications so that they no longer tolerate low security.
Log on to the e-mail account on the website and see if there is a security setting, you can change. I can't be more specific. Refer to the documentation of the service provider.
If there is no adjustment, convince the upgrade of server securityserver administrator. He or she must do it anyway. Low security affects all customers, not only Mac users.
Otherwise, you have all the right options to continue to use Mail with the service. You can disable SSL in the Advanced account settings, but that is very dangerous and may not work at all.
You might be able to get a more flexible mail client, such as "Thunderbird", to accept the low security, or perhaps you can access the account via webmail.
Ideally, you should switch to a provider of postal services better. You would not have this problem with a well-run service. The risk of weak SSL are known for a long time, and to competent server administrators have already taken the simple steps are sufficient to avoid these risks.
-
I can not connect to. Software Microsoft gets Ths user profile Service Service has no connection user profile cannot be loaded.
Hello
References to Vista also apply to Windows 7.
You can try to fix it with Safe Mode - repeatedly press F8 as you bootup. Safe Mode ADMINISTRATOR account has no password by default (unless someone has changed the password so it should be available).
Some programs such as the Google Updater (if you added the toolbar Google, Chrome or Google Earth) has been known to cause this problem.
Error message when you log a computer Windows Vista-based or Windows 7 by using a temporary profile: "the user profile Service has no logon. Unable to load the user profile.
http://support.Microsoft.com/kb/947215Difficulty "the user profile Service has no logon. User profile cannot be loaded. "Error in Windows 7
http://www.SevenForums.com/tutorials/186131-user-profile-service-failed-logon-user-profile-cannot-loaded.htmlHow to fix error "your user profile was not loaded correctly! You have logged on with a temporary profile. "in Vista & Windows 7.
http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.htmlBE VERY CAREFUL IF YOU USE THIS ONE:
DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrupts you are TOAST.
How to enable or disable the built-in Windows 7 Administrator account
http://www.SevenForums.com/tutorials/507-built-administrator-account-enable-disable.htmlUse the hidden administrator account to lower your user account APPLY / OK and then lift it to ADMIN. This allows clear of corruption. Do the same for other accounts if necessary after following the above message.
You can use the hidden - administrator account to make another account as an ADMINISTRATOR with the same password (or two with the same password) to use a test or fix the other.
You can run the Admin account hidden from the prompt by if necessary.
How Boot for Windows 7 System Recovery Options or use a Windows 7 boot disk.
http://www.SevenForums.com/tutorials/668-system-recovery-options.htmlWhat are the system recovery options in Windows 7?
http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7How to create a Windows 7 system repair disc
http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.htmlIf you cannot access your old account, you can still use an Admin to migrate to another (remember to always leave an Admin who is not used except for testing and difficulty account).
Difficulty of a corrupted user profile
http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profileI hope this helps.
--------------------------------------------------------------------------------------------
Rob Brown - Microsoft MVP<- profile="" -="" windows="" and="" devices="" for="" it :="" bicycle="" -="" mark="" twain="" said="" it="">-> -
So I recently had my password wrong too many times and my iPhone 4S locked out telling me "iPhone is disabled; Connect to iTunes'. And so I connected to iTunes and decided to restore my phone. I finished the process of restoration of the configuration of my phone, but ultimately, it was not even let me in the phone! Once AGAIN he said "iPhone is disabled; " Connect " to iTunes '. However, this time, this message appeared just when I turned on my phone with a black background. I didn't scan the screen for the error message is displayed (and there was no time to be shown). When I tried to connect to iTunes again as he asked, now it says "iTunes can not connect to the iPhone because it is locked with a password".
So now, he said "iPhone is disabled; ' Connect to iTunes' on my iPhone 4S and ''iTunes can't connect to the iPhone because it is locked with a password ' on my computer. WHAT should I do?
As described in step 2 of "Erase your device with iTunes" in this article, you will need to use the Recovery Mode.
Recovery mode is described in this article as well. You may try to go into recovery mode more than once to succeed.
Maybe you are looking for
-
Satellite C660 request password
When I start my computer it displays a black screen with a blue box that says enter password.I don't understand why it happens, or what should be the password. Can anyone help please?
-
Hello everyone I have a HP Pavilion dv6750en and I want to downgrade from vista to xp professional but I can't find the correct drivers, I watch http://h10025.www1.HP.com/ewfrf/wc/softwareList?OS=228 & LC = on & DLC = in & CC = US & lang = to & Produ
-
How to replace battery Satellite Pro 4310
Hi all I would like to know how to replace the battery on my old of Satellite Pro 4310, I read it in my paper user. We're supposed to a locking system, but I have not found anything close to the battery... only a drawing with two positions lock and u
-
Problems to install iTunes on Vista
I am trying to install iTunes 10.2.2 on Vista Home premium 32-bit. I get the error message ' there is a problem with this Windows Installer package. A program required for this install to complete could not be run. Contact your personal support provi
-
OfficeJet 6000 E609n print on USB. I can't make it work wireless
HP Officejet 6000 E609n Win 7 64 bit My printer works on a USB connection, but I was not able to do function on a network wireless router connection. Router is Linksys WRT160N V3. I used all of the solutions recommended in the instructions from HP.