Can't get into my computer.

Similar Questions

• iertutil.dll was not found after trying to download internet explorer 8. I can't get into my computer. Not even the start screen.

  I can't get into my computer.  All I can get is the Task Manager.  It shows all my still intact material, I'm not him.  Not even to my home screen.  All that appears is my screensaver and a message saying to re - install iertutil. DLL... but how to do when I can't.

  Maybe someday, we will see again the proposal to:

  Once you open the Task Manager try the commands below.

  1. in the Task Manager, click file, and then click new task

  2. now type rstrui.exe and click OK

  This would launch the system restore on the computer refer the below Microsoft article more about the restoration of the system.

  If you really try , you would find that it does not work because rstrui.exe is unlikely that never will be in the PATH statement.

  If you want to launch the restoration of the system from the Task Manager, you will need to perform a new task like this:

  %SystemRoot%\System32\restore\rstrui.exe

  If c:\windows\system32\iertutil.dll is missing, you will see a message like this:

  Explorer.EXE - unable to locate component

  The application has failed to start because iertutil.dll was not found.  Re-installing the application may fix the problem.

  Because explorer.exe is not running, you will see only your background image /, but Ctrl-Alt-Delete will always bring up the Task Manager where you can maneuver around and replace the file.

  If the only problem with your system, it's that iertutil.dll is missing, you can replace the backup copy in the dllcache folder.  You can continue to obtain reviews iertutil.dll is absent, but just click OK for messages of recall as they pop up so you can continue working.

  One might think that you use the Task Manager, you can browse c:\windows\system32\dllcache and (after choosing to view all files) copy the iertutil.dll from there and then paste the iertutil.dll file in c:\windows\system32 where it belongs.  That actually works, but it seems that it does not work as you will get an hour glass stuck on the paste operation and perhaps wonder whether or not it has actually worked.

  To feel better replace the missing file, so you can actually see the file being copied and replaced... Task Manager, click file, new task and enter in the box (assuming that Windows is installed on your C drive):

  cmd

  Click OK to open a command prompt window and first make a copy of the original file (if it exists) by entering the following command:

  copy c:\windows\system32\iertutil.old c:\windows\system32\iertutil.dll

  That copies the file in progress if there is an and it will just complain if it is not a copy.

  We know that XP likes to keep the backup copies of critical system files in this folder:

  c:\Windows\System32\dllcache

  Knowing this, copy the backup copy of the missing file and replace the missing or suspicious file by using this command:

  Copy c:\windows\system32\dllcache\iertutil.dll c:\windows\system32

  Answered in the affirmative if invited to replace the existing file and then you should see a message that 1 file (s) has been copied.

  Type "exit" to close the command prompt window.

  Who will replace the missing or suspicious file and if that's all that's wrong with the system, Shut Down box Task Manager, you can choose to reboot your system and see how things are going.

  Do, or do not. There is no test.

  I decided to implement the points for a new puppy instead of a pony!

• my child has changed my windows password and I can't get into my computer, I have xp sp3

  my child has changed my windows password and I can't get into my computer, I have windows xp sp3.

  Hi JENNHPL,

  See the below Microsoft article and try the steps mentioned, check if it helps.

  How to connect to your Windows XP-based computer if you forget your password or if your password expires

  http://support.Microsoft.com/kb/321305

  If the article above does not help then refer the article about Microsoft policy on forgotten passwords

  Microsoft's strategy concerning lost or forgotten passwords

  http://support.Microsoft.com/kb/189126

• I had to re install my vista from a backup I did earlyier and he does not remember what my password was at this time and he can't get into my computer.

  I tried to upgrade vista ultimate to 7 ultimate and never managed to do work he kept crashing until I installed it (I tried about 6 or 7 times). I then went back to vista and had to reload from a return upwards I had done. now, I can't connect to my computer all it says is the wrong password and I tried all the passwords that I can remember. I changed my password often due to having older children who want to bypass the parental control. can anyone help me to get into the computer or I have to formatt and start over?

  If you have a Vista DVD disc or repairs, the following tutorial might be able to help, as much >
  IMPORTANT NOTE: this works in cases where you changed your password to something new and then has forgotten or deleted a user account by accident. So that this works, there must be a restore point from the system during which logging has managed for the account of the problem.

  Here is the link:
  http://www.howtogeek.com/HOWTO/Windows-Vista/how-to-regain-access-to-your-administrator-account-in-Windows-Vista-using-system-restore/

  Case of failure of the foregoing, we are not allowed to help users to bypass the password protection, regardless of what are "reasons".
  Here's the Microsoft Policy on this issue: Microsoft's strategy on getting Areound passwords

  For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• Someone has changed my password to something I don't know, now I can't get into my computer without password. I have treid to reset without luck how to get back into my computer.

  I tried to log in with my old password and then when it says the username or password is incorrect, I then click OK and it says pass Reset :) word, I enter my password and then click on reset password in my flash drive and I get not implementing wizerd giving me instructions on what to do. Help, please! I HAVE BEEN FIGHTING WITH this for MANY HOURS Thank YOU

  You can use system restore to restore Windows to a date where your password still worked:
  1. put your BIOS so that it uses the DVD drive as its primary boot device.
  2 start the computer with your Windows 7 repair CD.
  3. press a button if you are prompted to start from the DVD.
  4. When prompted, select "Safe Mode Command Prompt".
  5 log in as administrator if you are prompted.
  6. Select repair when prompted.
  7. When you are prompted, select System Restore.
  8. set Windows to a point before this problem occurred.
  9. When finished, remove the CD before restarting the system.
  In step 2, you can also use the Windows 7 installation DVD. The subsequent steps are similar to those above.

  When you're done, why not create a second admin account, then lock up its details. Next time you have a password problem, use the same way you use the spare key to your car when misplace you the master key.

• 0x0000007B (0xBA4E3524, 0xC0000034, 0 x 0, 0000000 00000000 (0 x 0, 4 x 1, 0, 0).) Can't get into my computer. I bought it from Dell and it came not with the backup drive. Any help out there?

  I wrote the problem in the title, sorry... I can have corrupted a file. In any case, can I go back in my computer. I had done a backup disk, but I marked with a question mark. I don't think I did it properly. Windows xp always throws no disc.

  Hello

  See the steps in the following article and check the status of the issue.

  Advanced troubleshooting of errors "Stop 0x0000007B" in Windows XP.

  http://support.Microsoft.com/kb/324103

• I forgot my password and I can't get into my computer.

  I use xp

  The built-in Administrator ("Administrator") has a blank password, by default. Login as "Administrator" via Safe Mode, and then use the user accounts Control Panel to reset the password for your user account. Ramesh Srinivasan, Microsoft MVP [Windows Desktop Experience]

• How to remove the Windows 7 Administrator user when I can't get into Windows

  My laptop was stolen, and all the disks.  When it was recovered by the police, it was returned to me with a password protected user account.  I tried the steps to connect safe mode, but that the same user account is presented as the administrator account.  I can't recover the system, given that the recovery disks were never me returned (very probably not recovered by the police) - even with the OS install disk, flew with the computer.

  How can I get into my computer and get back to work again?

  My laptop was stolen, and all the disks.  When it was recovered by the police, it was returned to me with a password protected user account.  I tried the steps to connect safe mode, but that the same user account is presented as the administrator account.  I can't recover the system, given that the recovery disks were never me returned (very probably not recovered by the police) - even with the OS install disk, flew with the computer.

  How can I get into my computer and get back to work again?

  Use your Windows repair CD to start the computer in Repair Mode, and then use the system restore to set Windows to the Restore Point as soon as you can find. The chances are that this will be a point before they changed the password.

• How can I change password to get into my computer? I am now in my computer, but want to change for the next time I open it.

  How can I change password to get into my computer?  I am now in my computer, but want to change for the next time I open it.  Thank you.

  Click Start, click your account at the top right picture, click on 'change your password '. You must then enter the old password and a new.

• I can't get into my control panel to change the security settings or anything like that. It says \windows\systems32\rundll32.exe not found. What should I do?

  I can't get into my control panel to change the security settings or anything like that. It says Windows\systems32\rundll32.exe not found.  What should I do?

  Hello

  1. don't you make changes on the computer before this problem?

  Check if the steps of troubleshooting the following article shows you help.
  Cannot find the Rundll32.exe file when you open Control Panel
  http://support.Microsoft.com/kb/812340

• When I open the games online I can't get into the game, and they will write check your firewall

  can you please answer

  When I open the games online I can't get into the game, and they will write chek your firewall

  Original title: network programs network networking Internet Web site Site Web Web Site URL

  can you please answer

  When I open the games online I can't get into the game, and they will write chek your firewall

  Hello

  I'm sorry for the inconvenience, but I should be able to help.
  Internet connection issues are widely available and vary from one case to another. Your question, however it seems that the most likely cause is that your computer's firewall prevents your applications to connect to the internet. You can check this easily by:

  1. go to the Start Page of Windows 'default Page of Windows 8.

  2 mouse hover in the top right of the screen then click on the search"" button.

  3. type in 'Control Panel' after a brief search you will see a button at the top of the page left labled 'Control Panel' click on this button and you go in desktop mode and allow you to navigate in the control panel.

  4 from there, click on the tab labeled "system and security."

  5. then, click on the second option in the list titled "Windows Firewall"

  6. the first thing you want to do is to check if you are on a "private" or "Public network" (a private network is usually the safest and although on this type of network, you are less likely to be vulnerable to attacks, Public network are accessible by anyone and give a greater risk).

  7 the right it will say Private Networks Connected / not connected and below that it will say comments or connected/not connected networks public. Most computer security settings differ based on your type of connection, if you are on a network audience of settings on your computer will be more strict and could prevent your programs connected to the internet. (Say if you are connected to a private network, you can probably exclude this.)

  8. If you are connected to a private network and your programs don't always work correctly in the top left of the window under "Control Panel Home" you want to click on the option "allow an app or feature through Windows Firewall."

  9 a list first your "Internet Capable of programs" quickly browse and find that you are having problems with and take note of the checkboxes next to them. If no box is checked, you will want to allow them to connect. Do this by clicking on the "Edit settings" button located in upper right

  10 you want then allow your program through the firewall, this by simply checking the box next to it. (Note that if the Public network that can leave your computer vulnerable or higher risk)

  11 after doing this click ok, now go back and try to run your program and see if the problem is resolved.

  12. If you cannot find your program, click the "Allow" another app... button and navigate to your programs (usually in the folder C: / drive in the folder programs.) and choose your program and adjust the settings to allow through the firewall.

  13 if this does not solve your problem, and the problem persists, try to go into Internet Explorer, by clicking on the gear in the top right and open Internet Options. Go to the Security tab and check how strict your settings are. You should be able to click on "Reset to Default" to solve this problem, if that's the problem. (Located at the right bottom)

  I hope that this helps if not let me know and I'll give you some suggestions.

  Thanks for your time, I hope this has helped.

  -Ian

• When I go to creative cloud, it remains in the loading part... I can't get into the FlashCC / AnimateCC... (Google Translate)

  When I go to creative cloud, it remains in the loading part...
  I can't get into the FlashCC / AnimateCC... (Google Translate)

  Restart your computer and try to install again or opening.

• I can't get into a new contact to my contact list

  I can't get into a new contact to my contact list

  And what happens when you try to do?

• Satellite L840/020 - can't get into BIOS after enabling the quick start option

  I have a laptop Toshiba L840/020 (PSK8LA-020007). I recently installed a 330 Series SSD and Windows 8 Pro RTM 6.2.9200 MSDNAA on this Intel and enabled the fast boot option in the BIOS (boot speed > fast).

  Now I can't get into the BIOS, no matter what I do. I tried pressing the power button / stop while pressing F2 (as suggested by a few other forums), upward on default that I tried all F and Esc keys, but nothing does. I also tried repeatedly pressing F2 during startup, plugged a USB external and supported on F2 keyboard on it, but no matter what I can't get into the BIOS.

  When I go to the Toshiba support download section > 8 64 bit Windows, I see also a BIOS update for my laptop, but when I try to install I get the following error:

  ---------------------------
  Error
  ---------------------------
  Flash process will end!
  Current platform have secure start capability, it must provide the location of storage NV by interface IHISI.
  Please contact BIOS OEM Engineer to add the feature.
  Without this IHISI interface, variables to authenticate will be modified or erased by flash process.
  If you understand the risk and want to keep flashing.
  You can add the following parameter in platform.ini to ignore the error.
  [EngineeringErrorDisable]
  SkipSecureBootProtectionCheck = 1
  ---------------------------
  Ok
  ---------------------------

  I'm not changing platform.ini and flash, without first asking the help of the community.

  Please let me know how to enter the BIOS. Thank you.

  null

  Hello

  First try INS then F2 key.

  Then you should be able to access the BIOS, I recommend disabling the QuickStart in the BIOS if you can successfully enter the BIOS.

  With regard to the update of the BIOS.
  I checked the page of the Toshiba driver to THE and it seems that the BIOS v6.20 is even similar to Win 7.
  I think that the BIOS update must be done running the system pre-installed Toshiba since Win 8 is not officially on the market, and to my knowledge, there are some big restrictions updated BIOS running Win 8

• Can't get into BIOS

  I just bought a side 130 for my girlfriend for Christmas and wanted to set up today.

  But I just can't get into the BIOS! I keep on pressing F1 during the startup Lenovo screen.

  I have pressed it several times, he broke down, I even tried with the Fn key. Nothing has worked.

  I have been working with and professional support Lenovo (and IBM) laptops for more than 10 years and not once I had such a problem. It is only the second E-series phone I've ever had. I bought myself an E525 last summer and had no such problems and to work, we have T, X and W-series.

  Am I missing something? Am I too old? :-D

  Any help would be appreciated.

  Thanx

  The twist, I completely power down the laptop - meaning, hold the button for 5 seconds (the closure of normal windows will not suffice).

  Then, when you turn it back on and see the Lenovo logo for the first time, you should see the message "press on enter to interrupt Boot", press ENTER, and then you will get a menu of options, one being to enter the bios.