Can't get the Time Capsule network to see Airport Extreme?

Similar Questions

• I have 2 imacs and a laptop computer and you want to back up all three wireless via time capsule on my existing wifi network. If we can also use the time capsule as my wifi and replace my uverse wifi, that would be great. possible?

  I have 2 imacs and a laptop computer and you want to back up all three wireless via time capsule on my existing wifi network. If we can also use the time capsule as my wifi and replace my uverse wifi, that would be great. possible?

  If you want to make sure that you will be able to get the Apple support in case of problems or questions with your backups, you must use the wireless Time Capsule to back up your Mac.

  As long as the time Capsule provides a wireless signal, you can decide who to your 'main' network, then use it wireless Uverse for "guest", or children. If you do not need the Uverse router/modem wireless at all, it is possible to turn off wireless on the device and make it work only as a support modem/router...with Uverse wired.

  At this point, you can start thinking about how you want to configure things and get back in touch if you need some advice on how to do it.  We need to know what operating system that uses the Mac that you normally use to administer the time Capsule, provide good instructions, if you need it.

• How can I get the time and date appears on a sony cyber-shot camera

  How can I get the time and date appears on a sony cyber-shot camera

  Hi terpmarty,

  What is the model number of the Sony Cybershot camera?
  Instructions for superimposing the date and time are model specific. Some models do not have the ability to superimpose the date and time too. In such a case, you can use the supplied software Picture Motion Browser (PMB) or PlayMemories home (WPH) (Compatible with the Windows operating system) to print the date and time on pictures.

• Can I use the Time Capsule wireless for multiple computers without using it as a router?

  I am looking for an external backup for 2 computers drive.  I have a desktop iMac and MacBook Air.  I like the idea of being able to back up my MacBook Air wireless, but I need to make sure that it will work the way I need to.

  I already have a wireless router that works well for me, I don't need the time Capsule to act as a router. I'm just needing a wireless backup drive.  So, the question is, can I use the only time Capsule as a storage device for backup of wifi or do I also have to use it as a wifi router?  My fear is that the router service is not as good as the router, I currently have.  I live in a big House of 2 floors, making it very difficult to receive a strong signal throughout the House.

  can I use time Capsule only as a backup wireless storage device or do I also have to use it as a wifi router?

  Time Capsule need to connect to your router/modem existing using wired Ethernet wired, permanent.

  If you plan to use the time Capsule to back up your Mac with the help of the application Time Machine on every Mac, the Mac will have to save on the wireless signal Time Capsule for the process to be officially supported by Apple.

  While it is possible to turn off wireless on the Time Capsule and try to save it to your existing wireless network... and it pourrait work... but there will be no Apple support backup problems... so it would be a good idea to plan to use Time Capsule wireless backup purposes.

• How can I get the time to a server in JavaScript? Thank you

  Hello I have implemented a JavaScript from Adobe that expire after a certain date. However, the script asks both on the computer that can be changed. I thought that maybe I could get the time from a server NTP, NIST, which cannot be changed. However, I can't understand how to call and get the time server using JavaScript. I heard that JavaScript is client-side, but there is also a side server as well. Is it possible to code in Adobe Acrobat DC? I heard also that time of the OS is different maybe through Microsoft server. Could I get the OS somehow time?

  I've tried ActiveXObject which doesn't seem to work and in a desperate trial of windows.open ("Internet address"). Other thoughts on attempts? Thank you very much!!!

  Other strategies are also welcome having the exact time of the real.

  -Christmas

  The main problem with anything that is based on JavaScript is that it can be turned off easily, in order to place you in the document code will not work. Or a PDF Viewer that can't stand not JavaScript can be used. A form can submit to a server that can return a response that could include the current time.

• Can I used the time Capsule airport in a car?

  I intend to buy the airport Time Capsule to use my car for road trips that we often take. I was wondering if the Capsule can be used as a wifi hotspot while I'm in the car, so I can play games and go on social media with my iPad and my Macbook.

  It will not work in a car.

  You need an internet modem > Configure Time Capsule for the first time - Apple Support

• Can't get the timer to work

  Hello
  
  I'm new to AS 3. However, I find it disconcerting overall. Whenever I try to go further with her I find that I can't get what seems like simple tasks to function.
  
  This time, I'm trying to work with the timer class. I have two layers: view and actions. In the display layer (which is below the layer actions), I have only one instance of the dynamic text. I gave it an instance name of dtDisplay.
  
  In the layer actions, I have a keyframe and copy the following code:
  
  import flash.utils.Timer;
  
  function runMany(event:TimerEvent):void {}
  trace ("runMany (called") + getTimer() + 'ms');
  }
  
  var myTimer:Timer = new Timer (25000,1);
  myTimer.addEventListener (TimerEvent.Timer, runMany);
  myTimer.start ();
  
  
  dtDisplay.text = "haha."
  
  
  What I want to achieve with this code, is 25 seconds, then the dynamic text applied to the control.
  
  However, when I run the flash file, I get an error on the line with myTimer.addEventListener:
  
  "1119: access of possibly undefined property Timer through a reference with static type class."
  
  Now, I think that this could be related to my class path. I set the class path to have two values:
  
  c:\Program files\Adobe\Adobe Flash CS3\en\Configuration\ActionScript 3.0\Classes
  C:\Program Files\Adobe\Adobe Flash CS3\en\First Run\Classes\mx\utils
  
  The second path has at least the part "utils" of the declaration of import at the top of my body. However, when I look at the utils.as, I don't see any reference to a timer class.
  
  I searched timer on my hard drive in the form of files that contains the class, but can't.
  
  Someone at - it ideas? Thank you.
  

  Hey!
  instead of myTimer.addEventListener (TimerEvent.Timer, runMany);

  myTimer.addEventListener ("timer", runMany);

  This error dialog box said you, was that it has no property of timer, TimerEvent.
  (TimerEvent.TIMER there, I don't know what he does (I'm new too) AS3 is very particular about things like that)

  If your parameter of function (event: TimerEvent) disagrees, try (event: Event) or (e: Event)

• Can't find the time capsule after changing access timed through iPhone app airport utility (setting: no access between 0130 to 0600). But I can not connect or find the same time capsule in the 0800.

  Cannot find or connect to time capsule after you change the timed access thro iPhone app

  You must have defined it incorrectly... factory reset and start again.

  Give us a screenshot of the settings before you apply them.

• My PC clock and date always change when I turn on the PC. How can I get the time to stay the same / correct?

  Hello. Not sure if I have come to the right place with my question. I have Windows XP Home Edition.  My PC clock and date change every time I turn on my PC.  I set the time and date when I turn it on, but then when the PC was interrupted and I next turn to the, (after a period of time) the time and date will be incorrect - a few months and hours.  I have looked for ways to solve this problem, but couldn't find anything.  Any suggestion would be appreciated. Thank you.

  Hi Anti-A,
   
  -Remember to make changes to your computer before this problem started to happen?
  -You are using a laptop or a desktop computer?
   
  Determine if the loss of time is the result of a weak computer battery. Follow these steps to do the same thing:

  a. click Start, point to programsand then click MS-DOS prompt.

  b. at the command prompt, type time and then press ENTER.

  c. compare this time with the time shown by the clock in the taskbar.

  d. Type exit and press ENTER.

  If the computer's time and the time on the clock are different, the computer's battery may be too low for accurate time, and it must be replaced. For more information on how to replace the battery, refer to the documentation that came with your computer.
   
  Follow the steps listed in the article below and check if it helps you fix the problem:
  Windows XP, waste of time

• How can I change the physical address associated with my Airport Extreme

  I moved, but when I look for devices by using find my iPhone devices connected to my Airport Extreme base station seem to be at my old location. How to upgrade the physical address associated with the Airport base station?

  To the best of my knowledge, there is no way for the user to do. Finally, the database of Apple will update. There is some anecdotal evidence of that having an iPhone connect to airport speeds the process.

• How can I get the status bar below to see the date when I mouse over it?

  The lower right corner of my screen shows the current time. Sometimes, when I mouse over it the day and date appear, sometimes not. Can I do this more coherent?

  This is not a built-in function. Are you positioning the mouse over the taskbar Windows XP, or if it displays on the bar of Firefox Add-on?

  For the Windows taskbar, if a ToolTip shows in a few seconds, I usually the mouse on something else and then try to return to it to see if it works on the second...

• can't see the time capsule on network

  I have a router modem wireless method

  2.5/5.0 and I want to continue to use the wireless installation.

  I am up-to-date on El Capitan.

  The router via ethernet is an express airport 2nd generation connected to an amp for antenna and in addition to the express via ethernet is a time capsule of 3rd generation? in a press room feeding a number of multimedia devices.

  What I want to do is to backup my Mac Book Pro on the time capsule which I see in the finder, but not its content, nor I see

  It is contained in Time Machine.

  Can someone help?

  It can be very difficult if not impossible... or only very little reliable if you do not connect the computer directly to the TC...

  Anyway... have a go... find the IP address of the TC of airport utility... no chance then don't first plug the computer by ethernet directly to TB. Use Thunderbolt for the ethernet card if your mobile phone is failed.

  Once you have the IP address... Use the top Finder menu... Go, connect to the server.

  Type AFP://10.1.1.46 (substitute your real IP of the TC).

  When the connection is done put the password and save in keychain.

  It will work up until the IP... Therefore, force is not to change.

  Still had problems give me a screenshot of the airport with the pages of summary of the Express and the TC utility.

• Can I use my time capsule for wired Internet?

  The fundamental question is, I can connect my time capsule to my wireless internet router and then use the capsule to connect my iMac to the Internet with an Ethernet cable?

  The back story: I have an i7 iMac late 2009 that has worked perfectly until that somewhere around OS x Lion. The update came, and suddenly the wifi became shotty; intermittent connectivity that could last from 2 hours to 2 minutes and often, the computer would suddenly turns off. So, I just took an Ethernet cable from my gateway wireless comcast directly to my time capsule and then another was running for the TC to the iMac. It worked perfectly when the router and the iMac were in the same room. Since then, we moved and there is only a single coaxial connection of work in the new House, and this room that can hold your desktop. Now, I searched high and low for a fix for the problem of wifi, without success; reset the PRAM, change the wireless channel reset wireless packet, you name it I tried it (with the exception of a reinstallation of firmware lion before the airport summary-pretend). I really do not have the money to have someone come run an Ethernet cable through my walls now or to understand the situation of coaxial cable (I tried to do it me but there are about 10 outputs and the room that I want to use seems to actually be connected directly on a former satellite Hughes-NET on the side of the House). Now, this wireless to the dream of the Ethernet connection is my only option... Anyway I can make it work?

  The fundamental question is, I can connect my time capsule to my wireless internet router and then use the capsule to connect my iMac to the Internet with an Ethernet cable?

  The answer is not quite as simple.

  Yes... If your 'hand' wireless router is another Apple wireless router.

  No.... If your 'hand' wireless router is a part 3.

  However, you have two options if you have a 3rd party router that provides to your wireless network:

  (1) add an AirPort Express and it set up to 'join' the network wireless provided by your 3rd party product. Then, the AirPort Express can provide wired Ethernet cable of the Time Capsule and the iMac can connect to the time Capsule using Ethernet as well.

  (2) If you can not run the Ethernet cable... (always the best performance option)... a pair of Ethernet over Powerline adapters could be able to send the Ethernet signal via power lines the existing AC in your House.  In other words, the theory with EoP devices is that you already have the wiring in place, you must just adapters.

  An adapter would be located near your router 'primary' and plugged into an outlet. A short Ethernet cable connects to the router to the EoP adapter.  In contrast, an another EoP adapter is plugged into a power outlet near the time Capsule and a short Ethernet cable connects from the adapter to the time Capsule. Then, the iMac connects to time Capsule using a different Ethernet cable as well.

• Can I use a time capsule airport as my external hard drive?

  I have all the products in my house, 5 iPhones apple, 2 MacBooks, an iPad and an apple tv Setup.

  1 first question is the will of the time capsule (I'm looking at the version of 3 TB) Act as my external hard drive?

  2.second the capsule is essentially like a wireless router? If so,is the wifi for your apple products much better? If anyone could break it down into secular terms and highlight some of the advantages and disadvantages , I'd greatly appreciate it.

  
  

  (If your wondering I use my Macbook to store a LOT of music, photos, and surf the internet).

  Purchase of a disk external drive for my Macbook Pro is on the top of my to do list, I currently don't have 15 GB of free storage. I know that's not enough space for the computer to function properly. I definitely don't want what I just bought in March. Im trying to learn more about this kind of thing would have made very different when buying my Macbook if I could go back to March.I would be easily paid for the 256 GB of flash storage and would have probably just waited to buy it at all, until the so-called new macbook arrives soon.

  Once again thank you to all those who can help you!

  Mr.705

  1 first question is the will of the time capsule (I'm looking at the version of 3 TB) Act as my external hard drive?

  Although the Capsule is primarily designed to be used in conjunction with Time Machine for backups, it can be used as a network drive for file storage.

  2.second the capsule is essentially like a wireless router?

  He does. In simple terms, you can think of the time Capsule as a wireless router with an Ethernet switch and HDD.

  If so,is the wifi for your apple products much better?

  Not really. Your Apple products are designed to work with routers wireless of any manufacturer, not only those provided by Apple. However, Apple routers are simple to implement and the application to administer is available on both the Mac and iOS devices. There is a version that works on Windows PCs, but is currently outdated and does not support to administer the current base station 802.11ac airport.

• How to get the time based on the time zone?

  Hi all

  I try to get timestamp based on the time zone I assign in the computer... for example right now I m CA, if I change the time zone of the computer IS, and use time get Sec.vi, I always get time to CA.

  and not the ACC at EST time... How can I get the time according to the time on my laptop?

  Think I remember vaguely that LV reads this parameter when loading, then try to restart LV after changing the time zone and see if that helps.