Can't hear audio of recorded files OBS!

Similar Questions

• Can't hear audio when recording.

  I checked the preferences and I think that everything seems ok, but I can't get a peep out of him. Connection is headphone for pc,

  I also tried pre amp for pc but still nothing.

  As a test, I tried various tests and other freeware audio editing software and I can hear the sound when recording. I just can't hear when using Audition CS5.5

  Uses Windows 7 and hdmi sound through my graphics card. I think there must be a setting somewhere but I don't can not find. Thanks in advance for any help.

  Well, I had a play with the Realtek integrated sound card on my laptop - not my normal way of record - and has been able to monitor the entry as it was recorded.

  I used multitrack view (as one normally do) and the only thing I had to do was click on the 'I' symbol (next to the "M" (mute) (solo) "S" and "R" (arm for record) buttons.)  The 'I' is for the input of the monitor.

  However and this is a big however, on my laptop as soon as I specify the HDMI output, it disables the power supply of my helmet.  I can't try it without re - arrange my house, but I am betting that if I plugged the HDMI output on my laptop to my TV, the sound would be.  But it is certainly not on the headphone output of my computer.  It reappears on the headphones as soon as I select 'speakers '.  FYI, I also have to mess around with matching sampling frequencies since the HDMI is locked to 48 kHz and no digital output is set to 44.1.

  I hope this helps.

  Bob

• Can't hear Audio sounds.

  Original title: his record game

  Audio output spkrs or amp stops randomly

  mobo is processor of Msi p45 neo - f is Intel Quad-core and several readers including ssd as master

  in Windows XP without problems

  new OS Win7 all drivers and bios updates

  Audio chipset is Realtek... I installed the drivers updated and latest versions of the 1 version... no fiix

  OS startup... everything works great... I think the system enters a sleep state or green... and the sound disappears... all the icons are there... use the Troubleshoot Utility all seems perfect... no audio data

  pull 1/8 inch cable off sound... chips back detect this and I can get back audio... either that or reset

  It's a nuisance...

  Anyone have any ideas?

  Hi Ron,

  Thanks for asking the question in the Microsoft Community forum.

  From your description, I understand that you can not hear the sound.

  To better understand the question, please answer the following questions:

  1. What problem did you run?

  2. what happens when you try to run the audio?

  3 have you tried the problem with different audio system?

  Come back with more information to help you better.

  I suggest to follow the article and check:

  Diagnose and automatically fix problems of Windows audio playback:

  http://support.Microsoft.com/mats/AudioPlayback/

  No sound in Windows:

  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

  Hope the above information is useful, if you have any question back to us, we are happy to help you.

  Thank you.

• Missing video, but I can still hear audio?

  I'm currently editing a video file from my Flip camera, who first says that he accepts. But when I try to play, the video is all black. I can still hear the audio for it however. I tried to use some of my other files of the Flip camera, but the same thing happens. And this only happens with the Flip camera files. Those that I took with my other camcorder work fine. Help, please!

  First, make sure you have the latest version of Quicktime from the Apple.com site.

  Then, start a new project, and when you do, click on the settings button and make sure that you have selected the project appropriate for your Flip camcorder. (You don't say which version you use, but this feature is only available in version 9).

• Where can I find the sound recorder files?

  * Original title: sound files recorder

  I'm really looking for someone to help me on the extraction of a file of the sound recorder, I wasn't able to save. I use windows 8.

  I tried to look for him C:\Users\James\AppData\Local\Temp for an ART_tmp file, but I couldn't find

  it.

  I tried to play the sound recorder, while I'm looking at the C:\Users\James\AppData\Local\Temp and the ART_tmp appears, but once I close the program without saving it, it will disappear.

  Anyone, where does go... greatly appreciate any help. again, I use Windows 8...

  Thank you

  James L.

  I had this same problem and found the answer here:

  http://www.surfacetablethelp.com/2014/01/Windows-8-1-sound-recorder-file-location-and-best-apps.html

  I find my record and moved to another folder.  It's a m4a file so it works then very easily through my music app

• Can't hear audio when I press on enter to launch through frames

  I imported an mp3 file into the library, and then stage on a new layer. When I hit control + entry to see the movie the audio works fine, but when I hit enter to browse the images, I don't hear anything. This makes them incredibly hard to lipsync. How can I fix? I use Flash Professional CC 2014

  Click the keyframe that contains your sound.  in the properties panel, change the synchronization stream property.

• Can't hear sound from the computer.

  Original title: speakers does not. SigmaTel Audio Control panel says my headphones are connected, but they are not. Help!

  My speakers were working fine. All of a sudden, I couldn't hear a thing. I can't hear audio if headphones or external speakers are connected. Without them, I don't hear anything but my Mixer volume shows that my music. I opened the Audio SigmaTel Control Panel and it said my headphones are plugged into an outlet, but they are not. HELP!

  Hello

  I suggest you to contact support technique dell for assistance:

  http://www.Dell.com/support/troubleshooting/us/en/usgen1/ProductSelector

• Since the update of my pc based system with 10 windows and install the last Prime Minister CC when I drag a clip on the timeline audio does not come with it. I can hear audio playback in the preview window of small file so the audio is there, but it's not

  Since the update of my pc based system with 10 windows and install the last Prime Minister CC when I drag a clip on the timeline audio does not come with it. I can hear audio playback in the preview window of small file so the audio is there, but it does not appear or play on the timeline. I can drag an audio file of Ms on the timeline, but I need audio from my original file to synchronize my audio file recorded independently - used to be no problem... any ideas what I can not edit now?

  Hi Neil,

  Drag / drop may not work if you don't have any enabl; e source patch or did not target the track for the same thing.

  https://helpx.Adobe.com/Premiere-Pro/using/source-patching-track-targetting.html

  Vinay

• All using windows movie maker, I added audio, but I can't hear the music while playing the video... Why is this?

  All using windows movie maker, I added audio, but I can't hear the music while playing the video... Why is this?

  Hello

  1. What is the format of the video file that you use in Movie Maker?

  2. do you receive error messages when you try to play the video?

  Some audio and video file formats are not supported in Windows Movie Maker and cannot be imported. However, if you have a video or audio file that is not taken care of, you can use a non-Microsoft video editing software to convert the file into a format supported by Windows Movie Maker, and then import the video file or an audio resulting in Windows Movie Maker.

  You can use your favorite search engine and download third-party video editing software to convert the file.

  Note: The use of third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  For more information, you can also consult the following articles:

  Problems with importing files into Windows Movie Maker

  Import video, photos and audio on Windows Movie Maker

  Hope this information is useful.

• Modifying Clip Audio channels - can't hear more!

  I'm a Final Cut Pro Editor long pass to Adobe. It was interesting in a stereo environment when FCP uses all the mono tracks. I was told in a forum to split a stereo audio track by setting the mono track Format radio button choice (Clip menu-edit-Audio channels). I did and now I can bring my stereo clip in my editing on two mono tracks. GREAT! But now when I go back to the source Panel to draw another segment of the clip, I can't hear the sound more. I can hear it if I play it in my calendar, but not in the source Panel. Don't I have a setting wrong? I also tried to return to the menu clip to put audio in stereo, but it won't let me.

  Ideas? Thanks for all your comments!

  Bad, nothing is settled in itself; you're just banging an unfortunately poor implementation of the monitoring of the audio track in Premiere Pro. In the Source monitor, body is able to follow a trail of a clip at a time. If the video source has a stereo track, you can hear both channels at the same time. However, if the clip has, say, two mono tracks, you can monitor only one at a time. The default values of the Source Audio Track 1 monitor, so if the first string has no audio not recorded in it, it will appear as if the clip has no audio.

  To see if this is the case, load one of the clips of issues in the Source monitor. Click on the button in the Source monitor output (three circles; row buttons on the far right upper) and change of Waveform Audio. You will see a drop-down selector that says, at the present time, track 1; Click this button and change it to channel 2. If you can hear the sound when playing now, you have found the solution. Unfortunately, it's a preview clip option, so the next clip will return to channel 1.

  If this does not resolve the problem, please after return. Also, once you use a clip in a sequence, you can't remap audio channels; This is because channels are already used as a format or another.

• When I record a video with sound recorder windows 8.1 youtube I can't hear any sound when I play it back

  Why can I not hear any sound recording of youtube videos with my tape recorder windows 8.1?

  You still have this problem?

  • [1004066/questions/1004066]
  • [1004104/questions/1004104]

• I can't find the recorded files recently in my document folder

  I can't find the recorded files recently in my document folder

  Maybe not save them there.

  Assuming that you have saved the today, go to the Finder, type 'Today' in the oval at top right.

• Audio volume is at 100% but can barely hear the speakers. Help?

  Audio volume is at 100% but can barely hear the speakers. Help?

  Please read this blog to find out how to troubleshoot audio http://blogs.technet.com/b/mediaq/archive/2015/07/30/windows_2d00_10_2d00_audio_2d00_troubleshooting_2d00_tips.aspx

• I'm doing an audio call on Messenger (not a video call) but can't hear or be heard. What we're doing wrong?

  Audio call on Messenger

  I'm doing an audio call on Messenger (not a video call) but can't hear or be heard.  What we're doing wrong?

  Thank you. I'll do as you suggest.

• Installed the driver for Lifechat lx300, but can not hear the audio in media player

  I have a new helmet. I installed the driver but can not hear the audio in media player

  Hello

  I suggest you to visit the links below that would solve your problem.

  Step 1: Turn sounds into the lifestyle cat helmet

  http://support.Microsoft.com/kb/935749

  Additional information: a. tips for solving common audio problems

  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems

  b. no sound in Windows

  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

  Hope this information is helpful and let me know if you need additional assistance.