Can't hear sound on my Equium A100-027

Similar Questions

• Equium A100-027: after installing XP no sound

  After buying an Equium A100-027 with pre-installed Vista Home, I had to remove this in order to recharge with XP Pro SP2 to join to the domain of my company.

  Everything is installed properly and audio drivers are also present and work according to the Device Manager but no sound is heard. Also, I can't install the SRS Tru Surround driver because of the error message saying not supported on this computer.

  Post edited by: mike_kilby

  Hello

  Where did you download the XP drivers?
  Did you use the right method?

  For me it s a clear error message-> the driver cannot be installed because the phone does not support. You must use a compatible.

  Equium A100 is very similar to the Satellite A100. Try the drivers in this section and check the different versions

• No sound on Equium A100-027 using Vista

  Hello
  Sorry if this has been answered before, but I couldn't find an answer.
  My Equium A100 - 027 (PSAAQ) claims that the audio device is properly installed and works OK, but I can't get any sound from the speakers.

  I tried the latest sound card drivers from this site (and live RealTek) but without success.
  Any help would be greatly appreciated!

  Thank you.

  Hello

  The laptop uses a Realtek ALC861 audio chip.
  You need to install the realtek High Definition Audio Codecs on the site!

  The old driver should be removed first. Remove the sound from the Device Manager, and then after reboot again to install the new driver High Definition Audio Codecs!

  By the way; the DD Realtek Audio Manager should be found in the control panel.
  Check if the volume control has been set to a higher level!

• Can't hear sound

  Recently, I bought apple sports watch. I have it synced with my iphone 6splus. But I can not hear sounds when I get TEXT messages or call on either my iPhone or Apple Watch. Please let me know how to solve. Thank you.

  Hello

  Check your settings:

  • On your iPhone, in the application of the watch, go to: Watch My > sounds & Haptics:
    • Make sure that the Volume of alert is to the Center or right;
    • Ensure that Silent Mode is not enabled;
    • Check that the haptic strength is set to the middle or right of the cursor.
  • On your iPhone, in the application of the watch, go to: Watch My > Messages:
    • Perhaps choose Custom and check - under alerts - which show alerts, sounds and Haptic each are enabled.
  • On your iPhone, in the application of the watch, go to: Watch My > phone:
    • Perhaps choose 'custom' and verify that all desired changes options are enabled, including Haptic and sound under the title of the ringtone.
  • On your watch:
    • When displaying the hour, make slide up on the dial of the watch, drag left/right to the gaze of settings > check that do not disturb is not activated (the button with the icon of the Moon).

• Equium A100-027 - where can I download the drivers?

  Hi all

  I had * Toshiba Equium A100-027 * laptop to the United Kingdom and model: * PSAAQE-007008AV *.
  I tried online for LAN, audio drivers for XP operating system drivers, but I have not found all the drivers on a Web site for Toshiba Equium a100-027.

  Please give me suggestion how to get drivers to download.

  Thank you
  Leane

  Hey, Leane,.

  Hmm... Looking for drivers for Windows XP for Equium A100-027? Well, I checked the page of download driver Toshiba Equium A100 (PSAAQE) and I must say that I can find all the drivers for it and also the installation instructions document.

  I think you should check the page again:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers
  Laptop > Equium > Equium A series > Equium A100 (PSAAQ) > Windows XP

• Where can I get spare for my Equium A100 keys?

  Dear all,
  I hope someone can help. I have an Equium A100 - 338 laptop. I melted the left 'Shift' and left the keys 'Ctrl' (don't ask).
  Where can I get replacement keys?
  Cheers in advance

  Jasonsaxo

  The individual keys (plastic cover) can be pronounced.
  I'm afraid you have to buy the new keyboard.

  What you can do is to contact nearest Toshiba authorized maintainer and ask for help. Maybe they have a few old and used to the keyboard.
  Talk with them, pay a coffee and maybe you'll get to replace it for free. ;)

• Where can I download Vista for my Equium A100-337 utilities

  OK, I bought a new laptop last week a satellite A100-337, everything works well, but because that since I already had vista ultimate and some alphas, I tried to install allongside vista I had to reformat.

  So ive just got up and run again, but ive lost all toshiba utilities and drivers for the controller audio touchpad and wlan etc.

  Can someone tell me where I can download?

  Hello

  Equium A100-337 is a form of unit PSAAQE series. Am I wrong? The serial number, which you will find at the bottom of the unit.

  On the official European site of Toshiba, unfortunately, I have not found this series.
  http://PC-support.Toshiba-Europe.com/Vista/

  You will wait a bit for compatible Vista drivers or you try to install other series A100 only Vista drivers.
  You could also test drivers from the Satellite A100 because laptops are very similar

• Can't hear sound on the downloaded film from my camera (Finepix)

  Original title: Audio problem

  Can't hear sound on the downloaded film from my camera (Finepix)

  Can anyone help with this
  Thank you

  Can't hear sound on the downloaded film from my camera (Finepix)

  Can anyone help with this

  Thank you

  ================================
  Maybe install an AC3 Filter would be worth a try:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  AC3Filter downloads
  http://AC3Filter.NET/wiki/Download_AC3Filter
  (tests - AC3Filter full 2-5 b)

• Equium A100-027 touchpad not responding

  I have an equium a100-027 and today the touchpad was funny.
  For example, I went to move and sometimes it wouldn't be no move, moved very little, or when he moved quickly moved to around to the same place that it was before.

  I assumed that maybe it's just that my computer has been used too much memory or something. But then later, it no longer responds. I restarted my computer and the same problem, it does not move.

  Before anyone suggests, I in fact checked all the settings for it. I know there is a shortcut (fn + f9) to turn it off.
  However, I already checked and it is activated.
  I am falling quickly with this computer, six months old and already had two problems with it.

  Anyone can suggest a way to solve this problem, or should he be returned to be repaired?

  If it must be returned, how should I do this?
  I bought of Dixons, and when I came down to them with my last number, they said they have no responsibility and I had to call "the tech guy".

  This ended up being A £1.50 tech support number overcharge, which I'm not call again.
  This laptop has only 6 months, clearly under warranty. I don't have to pay who knows how much on a phone call just to get it fixed.

  Sorry if this sounds like a hangover, just in a bad mood with this computer at the minute.
  Thanks for any help! =-)

  Hello

  I see that you're desperate. Sorry to hear this story.
  But before you send this laptop to any point of service, you must reinstall the laptop with the Toshiba Recovery CD.

  This procedure will put the laptop to factory settings!

  If the touchpad does not work after reinstalling new contact ASP in your country.
  The service provider authorized in your country will be able to help you and if your warranty is valid, everything must be done for free.

  I can't believe that the appeal could cost about £1.5 because it s a common phone number.

  If you want to find the ASP please check this:
  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/generic_content.jsp?service=EU&ID=ASP_SUPPORT

• Alarm of battery low battery/criticism on Equium A100-027

  I bought an Equium A100-027 running on Vista Home Premium this Feb. Since then, I installed some software, for example a software phone Nokia, bluetooth, Virus-A drivers & all updates from Ms.

  When the battery is low or critical, I get no sound alert, despite this option checked in the Advanced Power Options settings and using the template to default sounds Win.

  The card sound & speakers work certainly I get sound notifications of Win and can play CDs, etc.

  Is there a driver/software that can be reinstalled to get this working again as system restore would only let me go back a month.

  Thanks for any help,
  Markus

  Hello

  I saw your post before, and I understand that you need help.
  I can give you the following suggestion:

  -Updated to the latest version of the bios. (Check this site out: http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_bios.jsp?service=EU&mode=allMachines)

  -Pick up your machine and update all THE drivers/tools/etc, but before installing some 'foreign' software, check if the "beep" is working properly (for things like go here):
  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp)

  -Install other software (Nokia Manager, etc.) and check after each newly installed software, if it still works. If after you install specific software, the "beep" doesn´t work anymore, then you know where the installation problem and you have some good software troubleshooting. ;)

  If you have questions: just after :)

  Welcome them

• Upgrading RAM and HDD on Equium A100-027

  Hello

  I have an Equim A100-027 and I already upgraded the two 512 MB to 2 GB 2 memory chips which is the maximum I can get?

  I've also already installed a hard drive over a 350GB one, but I'm looking to install a high - what is the maximum size that I could install? I guess that there must be a limit, but I was hoping that 750 GB to 1 TB would be OK.

  I appreciate all the answers - thanks in advance.

  Hello

  I'm afraid that 2 GB RAM ist the value of memory as possible which is supported by Equium A100-027 Mr. I have this chipset limitation.

  Upgrading the HARD drive must be possible from the controller SATA isn't limited to a certain size.
  That's why I think that 750Go should be possible

  Please share the news with us after finishing these updates.

• Question about updating map of RAM and graphics on Equium A100-027

  Hello
  I have an Equium A100-027 with 1 GB of RAM (2 x 512MB modules)
  If I would like to raise the speed, which RAM modules would need? I also need a new graphic card, can I buy a graphics card or should it be some for my laptop?

  Hello

  in regard to your question upgrade:

  RAM-> you need 200 pin DDR2 RAM: http://en.wikipedia.org/wiki/SO-DIMM

  Graphics-> update is not possible, because the graphics card is soldered on the motherboard of your laptop, which means it s 'wired '.

  That's all

• Equium A100 - 027: running slow

  Any help appreciated - my equium a100-027 running incrdeibly slow, especially shortly after the start.

  This is for all the excellent Internet programs.

  Sometimes I get an error message saying card Flash not working do not.

  Please help - thanks!

  Hello

  Satellite A100-027 seems to be equipped with 1 GB of RAM (2 x512MB)
  If you are using Win Vista or Win 7 then it would be desirable to increase the RAM up to 2 GB.

  You can also disable some background process is not necessary.
  You can do it in msconfig-> Startup tab.

  > Sometimes I get an error message saying card Flash not working do not.
  Well, the cards Flash is a utility that controls the FN keys.
  Perhaps this tool needs to be reinstalled again.

  Visit the page of European driver of Toshiba and download and reinstall the Toshiba Flash Cards Support utility.

  Good luck

• Need information about HDD upgrade on Equium A100-027

  HI people :-)

  Can I change the HARD disk drive in my Equium a100 027 for one with a speed of 7200 RPM?

  If not what is the largest size of HARD drive I can put in?

  It is also useful to do a lot to make a dual boot with Vista and XP or get one with Vista and the other drive with XP

  Someone can also point me in the direction of the place where to buy the right type of player with the correct connection... its SATA I think

  Thanks in advance for your help

  In my opinion, you can use the HARD drive with the speed of 7200 RPM. I put t really see no reason why this should not be possible!

  It is important that you buy a HARD drive with the interface supported and the size of the HARD drive.

  You are right; Equium A100 supports SATA HDD interface.
  You must not use SATA and IDE hard drives!

  According to some internet sites, the laptop came with 80 GB HARD drive.
  I presume that you should be able to upgrade the 120 GB HARD drive, but this is just a suggestion because Toshiba does not have any official information on the maximum size of HARD drive.

  Best regards

• Equium A100-027: could not find the drivers for Windows XP

  Hello
  I bought an equium A100-027 and, because of my work, I want to use a personal OS XP - Pro, I bought the retailer 2006 Microsoft.
  The problem is that XP installs successfully, but I can't find the drivers on the Toshiba Download Page.
  The laptop TYPE is witch PSAAQE is not listed. I tried to use the drivers provided by other series A100 PSAAxxx but XP does not accept. I managed only with the Intel graphics driver... How can I do?
  I sent a mail to support Toshiba in France and they redirect me to the download page of drivers even DO NOT contain any driver for my laptop... (it does not appear there).
  It is mandatory for me to use XP - Pro, because we use it for industrial automation, so I can't use Vista! seriously, I bought a PC that do not work on XP?

  Best regards
  A.Lazreg

  Hello

  You re right. I also checked the site and don't find your notebook in the series.
  Hmm you have tested other drivers Equium A100 series but also check the Satellite A100 series pilots.
  The Equium A100 Satellite A100 and very similar specifications and possibly some drivers will also work on yours.

  Toshiba Canada also provides different drivers. Take a look at this page:
  http://209.167.114.38/support/download/ln_byModel.asp