Can't patch WOW

Similar Questions

• We can merge patches when Applications are running

  Hi all

  We can merge patches to applications when the applications services are running? using the admrgpch utility.

  EBS: R12.1.3

  DB: 11.2.0.3

  Operating system: Solaris 5.10

  Thank you

  Moore

  Moore,

  Yes you can merge patches when the application runs. While this happens, there is no impact on the application.

  Amit

• can't play wow on windows 7__

  whenever I try to get world of Warcraft I get I can't connect to the server.  When I did the convenience store, he told me that wow was not compatible? Help, please

  gamer61,
  WoW works on Windows 7.  I play on the 32-bit versions and 64-bit Windows 7 with no problems.   You should check that your router is configured to allow traffic on the correct ports.  You should be able to get the port information on Blizzard's Support site.
  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Can we patch Applications (ADPATCH) without interruption using physical standby

  Hello
  
  Because I know I can physical standby database user to a database upgrade with minimal downtime. Can I use the same with Oracle application fixes using adpatch.
  
  In other words we can patch application (using Adpatch) without interruption using physical standby.
  
  Thanks in advance.
  
  
  Best regards

  In other words we can patch application (using Adpatch) without interruption using physical standby.

  N °

  Business Continuity for Oracle Applications Release 11i, database release 9i and 10g [ID 216212.1] - Section 4: apply an application Patch
  Business Continuity for Oracle Applications release 12 on the basis of data of exit 10 gr 2 - Single Instance and RAC [ID 452056.1] - 4.4 procedure - Application of Patch E-Business Suite
  Business Continuity for Oracle E-Business release 12 using Oracle 11 g physical Standby Database [ID 1070033.1] - Section 7: Oracle eBusiness Suite interview with Standby Database

  Thank you
  Hussein

• Installed Windows 7 and now can't start Wow, the cursor is frozen on the start screen.

  I tried to restart, resettlement and to plug and unplug the mouse, made sure that all the drivers are up to date! What now?

  Hi navvar,

  Thanks for posting of Windows 7 community.

  I suggest to start the system in safe mode and check if the problem still persists.

  Also download the current drivers and update the firmware of your mouse.

  Step 1: Perform a clean boot

  Note If the computer is connected to a network, network policy settings may prevent you from following these steps. We recommend strongly that you do not use System Configuration utility to change startup options on the computer, unless a support engineer Microsoft directs you to do so. This can make the computer unusable.

  a. log in the computer using an account with administrator rights.

  b. click on start to reduce this includes this ima, type msconfig.exe in the Start Search box and press ENTER to start the System Configuration utility.

  c. collapse this includes this ima if you are prompted for an administrator password or for confirmation, type your password or click continue .

  On the general tab, click Selective startup , and then clear the Load Startup items check box. (The box use the Boot file is not available.)

  d. on the Services tab, select the hide all Microsoft services check box and then click on disable all .

  Note Following this step lets services Microsoft continue to run. These services include networking, Plug-and-Play, record of events, error reporting, and other services. If you disable these services, you can permanently delete all restore points. Do not do this if you want to use to restore the system with the existing restore points.

  e. click OK , and then click restart .

  Follow the steps in the below link:

  http://support.Microsoft.com/default.aspx?scid=KB; EN-US; 929135

  Kind regards

  Amal-Microsoft Support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• How can you patch ESX rollback?

  I guess that the first part of the question is how to apply the patches... Do you use Crossover?  Or else you patch an image and then display a complete picture...?  Or you run remote commands to get/install the patch?  Other ways?

  I'm here to tell you that a boot from san configuration is the only way I know of restoration.  You break the lun and install patches.  If this does not work, restore you the snap.

  You could! (Not severe at all)

  single user boot mode

  tar ball everything except/tmp and / proc

  reboot, run patches.

  exception, boot to single-user

  roll the ball of tar for uninstall.

  You'd probably never do.  (Except when the detected impact 2) :)

  For customers who have this requirement, we never charge patches.  It's always a cool version using a kickstart server.  If something is wrong with the new iso standard.  Go back us to the previous one and rebuild from scratch, back to the previous version.  This go around we this conversation.  Each server is the same ISO on the network.

  This is not enough; However, I thought I would at least give you some (bad) ideas.

• Can I export my patches to another device that is running Mainstage 3?

  I'm to the point that I have to buy another computer to develop what I do to the Church. My current Macbook Pro has 3 Mainstage, with custom patches I've built in the 6 months. I am considering buying a new Mac just to run 3 Mainstage on while on the platform, but I don't want to lose all my current concerts and patches. Is there a way to do this? On another note, I guess I'll have to buy another program Mainstage 3 of the new device, but is possible to use my purchase of 3 Mainstage on multiple devices, or do I need to buy the app for each device? Thanks in advance for your advice!

  Yes, if you connect on the new Mac with your Apple which was used to buy the MainStage ID, you can install on multiple machines.

  You can save patches by clicking on the utility icon in the window list of patch (sprocket with the arrow pointing down) and selecting Save as Patch.  You can then move this file on your new computer.  If the patch contains any third party instruments, those will have to be installed on the new machine as well, of course.

  You can also save your file in Concert on an external drive and move this file to the new machine.  It might be faster if you have all the patches stored in one place.  I know that some church musicians have just a gig file that looks more like a library than a set of unique service tasks.

• Im having trouble getting the Blizzard world of Warcraft Downloader to send the last game, tasks in my WoW folder

  The Blizzard Downloader must be used to download patches MMORPG World of Warcraft as some more small are not on the download of files and sites sites third parties with patches WoW can not be guaranteed. Ive turned off Windows Firewall, Ive even tried to create a new rule to allow port 3724 which must be open, my WoW folder is not protected and when I click on the icon to start the download I chose FUNCTIONING as administrater.

  The problem is not with my router as the downloader worked fine when I used Windows XP. The patch is stopping at 10% and then to say that it has failed. Sometimes the sound indicating there may be a firewall. (Im using Windows 7 now). I even did a trouble Shooting in my network connection

  As it looks like the source of the file is corrupted try to get the file from another source that I had that issue a couple of times on different systems of Vista where the patch would not work on 1 system but on another system of Vista

• World of Warcraft patch 3.2 for vista?

  So I tried to re - install wow about 4 times... now to understand that the new patch (3.2) I can't play wow due to the fact that my laptop with vista on it is pre-decembre 2008.
  I have a DELL Inspiron 1501.
  Can someone tell me how to get the update that resolves this problem? I downloadd all the updates 17 which have been put on this laptop and STILL cannot install the new patch.
  Can someone give me a link as to where I can get this?
  -Thank you

  Hey buckwheat 91,.

  The last world war patch 3.1 requires a minimum of 64 MB graphic memory. Try to download the latest video driver for your laptop and install it. Here is a link from the site Web of Dells that I found to download and install the drivers:

  http://support.Dell.com/support/downloads/DriversList.aspx?c=us&CS=04&l=en&s=BSD&OS=WW1&OSL=en&CATID=&impid=&SystemID=INS_PNT_1501

  You can also check the video card drivers updated directly on the manufacturer such as ATI support site.

  If this does not work, could you please tell us if you get any guest while trying to install the game. If so, please let me know what is the prompt you get.

  Try this and let us know if it works.

  Thank you
  Kind regards
  Irfan H, Engineer Support Microsoft Answers. Visit our Microsoft answers feedback Forum and let us know what you think.

• Patch update that was hide/ignore first (WSUS)

  How can I Patch Update that was hide/ignore first (WSUS)? Windows XP/2003

  You will find support in WSUS specific discussion group: http://www.microsoft.com/communities/newsgroups/list/en-us/default.aspx?dg=microsoft.public.windows.server.update_services

  In your News Reader: news://msnews.microsoft.com/microsoft.public.windows.server.update_services

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Remove all the patches and windows updates

  Hello

  How can I remove all the patches by using the Recovery Console - command prompt environment. Is it possible to remove all the patches. Where are all the patches and updates KB is stored in the Windows VISTA Business operating system. Help, please

  Thank you
  Concerning
  Anoop

  Hi Anoop,

  Thank you for writing to Microsoft Vista Community Forums.

  You can uninstall patches to a command using msiexec.exe and command line Options.

  For more information about the removal of patches of command prompt, access the link below: http://msdn.microsoft.com/en-us/library/aa372104 (VS.85) .aspx

  It will be useful.

  Thank you and best regards,

  Srinivas

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think

• Help patch laptop Acer E1-510

  I have acer laptop E1-510 and I went to see if there is a bios update because on window 10 I brightness problems and I saw 2 new updates bios 2.12 and 2.13 I've updated my bios and my problem has been resolved, then I saw a patch in menu patch but the patch is for 8.1 and bios window 2.11 can I patch my laptop now , or I should not patch my computer because I am also under window 8.1 on the second partition.

  no patch, which was only for BIOS 2.11.

  99.9% 2.13 BIOS already has this patch.

• How can I restore my Combat Flight Simulator 3 after recent Microsofts updated security or is it not possibel

  Could someone help me please I have developed a problem with my CFS3 and the addons when I double click on icons and it comes at the start screen, I get the message that there is an issue that caused the program will stop working and what happens with all the addons it seems to touch anything related to bag 3 and ALL my other apps are working OK. I tried to reinstall CFS3 but whether available I even went to the system restore, but no joy, could someone help me on this, I suspect that it's files a.dll but it is what it is, whether it's the no CD crack I can't say. I downloaded some pictures to give you and idea. your help would be very appreciated Gary

  When I run CFS3 happens to the start screen, a message if poster indicating a problem caused the program is not working and it seems to me that this happened after the last security update has been installed. I tried the system restore, but did not work.

  I am running windows vista 32 bit with a phenom with service pack 2 procecssor.

  Guys please help us passionate cfs3 I've seen forums that I'm not the only one with this problem can a patch install in to solve the problem or do I have to reinstall my windows.

  E-mail address is removed from the privacy *.

  Hi Gary,.

  If I understand correctly you are faced with the question with the Combat Flight Simulator 3 after installing a recent security update. You need to reinstall the game after you install the security update. I would say to contact Combat Flight Simulator 3 support for assistance.

  http://www.Microsoft.com/games/combatfs3/support.aspx

  Hope the information is useful.

• MS Exchange patch

  I have 4.0 (4) unit connects to stand alone Exchange 2000 SP3 server, voicemail only. The Exchange Server can be patched with any general Microsoft pathces for Windows and Exchange version, or is it a specific set of Cisco patches that I need to follow?

  HI -.

  It's the doc of online reference that I use for OS/Exchange associated security and service packs (see part 3 under the Support policy for Microsoft Service packs). It will save you inadvertently install at the beginning and that affect your application unit, i.e. Windows 2003 SP1 on the server unit before the permissions wizard has been updated - http://www.cisco.com/en/US/customer/products/sw/voicesw/ps2237/products_device_support_table09186a008020a63e.html

  Kind regards

  Ginger

• Apply the patches to ACS 5.1

  Hi all

  I hope someone can help with this problem.

  I have an ACS 5.1 with the next load of S/W

  Deploying applications engine Cisco OS version: 1.2
  ADE-OS Build Version: 1.2.0.146
  ADE-OS System Architecture: i386

  Cisco ACS VERSION INFORMATION
  -----------------------------
  Version: 5.1.0.44
  The identifier for the internal version: B.2347

  I downloaded 5-1-0-44 - 3.tar.gpg, 5-1-0-44 - 4.tar.gpg and 5-1-0-44 - 5.tar.gpg to a local directory on GBA, but every time I try to run the upgrade patch GBA fix install 5-1-0-44 - 5.tar.gpg repository_name repository get following error output...

  chmod: cannot access at the "* .sh ': no such file or directory".
  Patch not valid 5-1-0-44-5.tar.gpg'-missing install.sh
  % Error: failed to open / validate the patch

  I have moved the 5-1-0-44 - 5.tar.gpg to a linux machine and tried to dencrypt the file using gpg d 5-1-0-44 - 5.tar.gpg but it invites then pass phrase, I tried a few guesses, but I couldn't decipher.

  So what part of the upgrade process I am missing, or do I have to install some kind of password so that the ACS can properly decrypt files to fix.

  I tried this with the patch 3, 4 and 5.  I need to start pathch 1?

  Thank you

  Cefyn Arch

  Helloz,

  Form where you downloaded the patch. I suggest you download from cisco.comif you download before.

  http://Tools.Cisco.com/Squish/1D47B

  No, you can directly apply the patch 5.
  Correct the command that you run to apply the patch.
  I wish allows you to check a few things

  1 are you using TFTP? If so, then switch to FTP and try again.
  2. prior to apply the hotfix, make sure that you can see the file in the repository.

  Show repository

  If you can see patch 5 under the repository then you're good to go.

  HTH

  Jousset

  ~ Make useful messages rate