Can't play DVDs on flea market M300? I need drivers?

Similar Questions

• How can I play DVDs from my hard drive with windows XP?

  How can I play DVDs from my hard drive with windows XP?

  If you have a decdoer of installed dvd, usually with packages like power dvd etc that allow you to watch a dvd in your dvd drive, and then later versions of Media Player will also play your DVDs, and all of these programs that play said removable DVD.

• Cannot read DVD on flea market Portege M300

  Hello.

  I wonder if someone can help me. I bought an flea market portege M300 and it's fine - however I could not create recovery discs that the option was not on the section Protect and Fix on Toshiba Assist.
  Now, I can't read the DVD.

  I guess that sort of resettlement was made but not with the toshiba recovery discs and so I can see I can play DVD CD or burn CDs. Does anyone have any ideas as to what I should do. Toshiba send me a recovery disc for the machine and so I was wondering if they would be on these discs and if I should wait until they arrive.

  Thank you, best regards,.

  Rachel

  Hello

  Does the drive support the function of burning?

  You can try to enter in the properties of the drive and select the recording tab.
  The option activate write to this drive must be marked.

  On the Toshiba Recovery CD, you will find an image with preinstalled operating system and all the Toshiba drivers needed and utility.
  If you want to watch DVDs if you need special software such as WinDVD or PowerDVD.
  These are applications of DVD player. I guess the WinDVD must be preinstalled on the image.
  To burn a CD s, you are also burning software. I advise to use a Nero.
  For me this is one of the best burning applications.

  You should try using different media. You should know that not all media are compatible and supported.

  You bought this laptop as a second hand unit, so it is possible that the drive is bad. Sometimes, if the drive cannot burn or read some of the media due to the error of calibration of lens. In this case there are not a lot to do to replace the drive.

• Can not play dvd directed by movie maker and create dvd on my TV

  I have Windows Media Player and DVD maker (version 6.0.6002.18005 file).  The type of file, I add to movie maker are all JPEG. I created the video file in movie maker and then use the option to burn on dvd in Director using a dvd - rw disc.  I can read the disc on the computer, but can't play them on the TV.  I checked with the manufacture of the VCR and said that this type of disc will play on my machine.  Others have suggested that the dvd was not finalized, but I guess it was taken in charge in machine to dvd program. I use Windows Vista.

  I have Windows Media Player and DVD maker (version 6.0.6002.18005 file).  The type of file, I add to movie maker are all JPEG. I created the video file in movie maker and then use the option to burn on dvd in Director using a dvd - rw disc.  I can read the disc on the computer, but can't play them on the TV.  I checked with the manufacture of the VCR and said that this type of disc will play on my machine.  Others have suggested that the dvd was not finalized, but I guess it was taken in charge in machine to dvd program. I use Windows Vista.

  =======================================
  FWIW... some DVD players will not play a home made DVD...

  That said, perhaps the following links will offer some ideas:

  Windows Vista-
  Demo: Create a slide show with music in Windows Movie Maker
  http://Windows.Microsoft.com/en-us/Windows-Vista/demo-create-a-slide-show-with-music-in-Windows-Movie-Maker

  Windows Vista-
  Publish a movie in
  Windows Movie Maker
  http://Windows.Microsoft.com/en-us/Windows-Vista/publish-a-movie-in-Windows-Movie-Maker

  John Inzer - MS - MVP - Digital Media Experience - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• I can't play DVD's with Windows Media Player because no compatible DVD decoder is not installed on my computer

  Original title: Windows Media Player

  I can't read the dvd with Windows Media Player... it says

  Windows Media Player cannot play this DVD because no compatible DVD decoder is not installed on your computer.

  What can I do to make it work... and I don't want to pay for another program.

  Thank you.

  Can not read the DVD in the drive Media of Windows XP
  ====================================

  Running the following command may be worth a try:

  Reach... Start / run... and type or copy / paste:

  regsvr32 jscript.dll

  Press on... Come in

  You should see the following dialog box:

  DllRegisterServer in jscript.dll successful / OK

  No luck?... read more...

  FWIW... Win XP cannot natively recognize Commercial
  DVD video... it requires a DVD decoder.

  If you could play before commercial video DVD...
  do a system restore to a time before this started
  may be your solution.

  (306084) how to restore Windows XP to a
  previous state
  http://support.Microsoft.com/?kbid=306084

  Or you could buy a DVD decoder at the following link:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  (948247) how to set a system restore
  point in Windows XP
  http://support.Microsoft.com/kb/948247

  Info about DVD decoders:
  Plug-ins for Windows Media Player
  http://Windows.Microsoft.com/en-us/Windows/downloads/Windows-Media-Player/plug-ins

  Or you can download and use one of the following
  freeware multimedia players:

  VLC Media Player
  http://www.filehippo.com/download_vlc/
  (works on XP/Vista/7)
  (name of the file to download: vlc - 2.0.1 - win32.exe)

  Media Player Classic Home Cinema
  http://MajorGeeks.com/Media_Player_Classic_Home_Cinema_d6213.html
  (works on XP/Vista/7)
  (name of the file to download: MPC - HomeCinema.1.6.1.4235.x 86 .exe)

  Or... you can try to download and install the
  Following Codec Pack.

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  * Proceed at your own risk *.

  K - Lite Codec Pack (full)
  http://www.filehippo.com/download_klite_codec_pack/
  (Win XP / Vista / Win 7-32 bit and 64 bit)

  Good luck...

• I can not play DVD through Media Center as my optical disk drive is disconnected.

  When I play in Media Player cannot detect DVD-ROM.  It's that I downloaded the Windows & upgrade.  Work on Dell Inspiron.

  Hello

  Upgrade to Windows 7? You typed Windows & upgrade and just want to be sure that the system has
  Windows 7 on it. It is the Vista Forum.

  Answers - Windows 7 - hardware and drivers Forum
  http://social.answers.Microsoft.com/forums/en-us/w7hardware/threads

  ==============================================================

  For Windows 7:

  If the system originally had a different version of Windows do you run Upgrade Advisor and
  see the compatibility for CD/DVD compatibility Center (and other devices according to the needs).

  Windows 7 Upgrade Advisorhttp://www.microsoft.com/windows/windows-7/get/upgrade-advisor.aspx

  Also check the Compatibility Center
  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx

  Check with the system manufacturer and the manufacturer of the device for more information about the drivers for Windows 7.

  Dell support
  http://support.Dell.com/

  Dell support drivers - product manual & warranty Info (left side) - and much more
  http://support.Dell.com/support/index.aspx?c=us&l=en&s=DHS

  Dell forums
  http://en.community.Dell.com/forums/
  --------------------------------------------------------------------------------------------------------

  Check these:

  The DVD player does not work after I installed Windows 7 - here are the different readers from Sony
  However the same issue could have an impact on your drive.

  http://support.Microsoft.com/kb/975270/

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.Microsoft.com/kb/982116

  -------------------------------------------------------

  If the system can run Windows 7 AND there are drivers for the devices that these might help:

  References to Vista also apply to Windows 7.

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during Windows Vista
  Setup after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and the
  correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• How can I play DVD (video_ts folder) of hard drive files

  I have a laptop of HDX16-1010EA premium. The grouped MediaSuite HP works Cyberlink DVD Suite Premium. My video editing software (Pinnacle Studio 11) create the DVD files in a folder "video_ts" ready for burning. On my old computer (XP) I got Cyberlink PowerDVD5 and who was an option to play the DVD files directly from the hard drive before burning them. This option seems to have disappeared as a result of Premium DVD, unless I'm looking in the wrong place. Can anyone help?

  Thank you

  Use VLC Player.  It's free.

• I have HP ze2315us, windows XP laptop. Lately, I can't play DVD, CD plays OK. Does not recognize the DVD.

  Some DVDs, like Windows XP, plays OK and any disc or CD plays in the country. But, no DVD set. Does not recognize. Search and search, but no game. Help, please.

  Hi Nuri,

  Thanks for posting the question in the Microsoft Community. If I understand correctly, you are unable to play a DVD. I understand that it must be frustrating, but don't worry, we are here to help solve the problem and guide you in the right direction.

  We start with a few questions:

  1 have had any changes made on the computer before the show?

  2. the problem occurs for any particular drive?

  First of all, I suggest for the link and try to run the fix it:

  Your CD or DVD drive cannot read or write media

  You may also refer to article and check if the problem persists:

  How to troubleshoot common problems that occur when a Windows XP-based computer cannot read a CD or DVD

  If the problem is not resolved, please respond with more details and we will be happy to help you.

  Thank you.

• Laptop HP 2000: I have laptop HP 2000. I can not play dvd help please

  When I put a dvd in nothing happens. nothing is displayed. I'm looking just for my screensaver. is there a link I can download from read DVDs?

  Hello

  Hold down the Windows key and press R

  In the run box, type devmgmt.msc and press ENTER.

  In the Device Manager window, expand CD-ROM/DVD-ROM drives, right-click the drive and select Properties - on the general tab, is there an error code in the device status area?

  If there is an error, after return with the message.

  If everything looks Ok in Device Manager, try installing VLC on the following link.

  http://www.videolan.org/VLC/index.en_GB.html

  Kind regards

  DP - K

• I can't play DVDs in Windows Media Player 12 on Windows 7 Pro and get this error msg: Windows Media Player cannot play this DVD because there is a problem with the digital copy between your DVD drive decoder and video card protection.

  Hello, thanks for reading and helping me.

  I try to play a legitimate, belonging to DVD, but Windows Media Player 12 will not play on my computer Windows 7 Professional.  The DVD worked a few days ago, but all of a sudden, I get the following error message:

  "Windows Media Player cannot play this DVD because there is a problem with the digital copy between your DVD player and the video card protection decoder. Try to install a driver available for your video card.

  I did a lot of research of these forums and on the ' net.  Here are the suggested steps I tried without success:

  • I tried VLC player.  This works.  However, rather than use this workaround, I wish to find a solution to my problem WMP/WMC.
  • I tried several DVD for years over the last decade.  These DVD works on my laptop, also running Windows 7 Professional and the shark 007 codec.
  • I uninstalled my Shark 007 codec
  • I tried other codecs (K-Lite)
  • I assured that the latest drivers are installed on my video card, XFX ATI Radeon 5850
  • I tried to uninstall Nero 9
  • I tried to use the Windows 7 troubleshooting options:
  • > Reading and burning CD, DVD and Blu - ray (no problem)
  • > Windows Media Player DVD (no problem)
  • > Windows Media Player Settings (detects a problem, wants to restore factory settings, every time, no matter what happens)
  • A system restore to a time when the DVD was working did not resolve the issue
  • The different links in Microsoft, I found in this forum about this problem do not seem to be useful.  There is a link that points to the set-top boxes, but this page just says: "Windows 7 comes with a decoder.
  • I assured the latest driver is available by going to "Device Manager", right click on the drive, then click on "update driver software".
  • I assured that the latest firmware is installed directly from the manufacturer's website.
  • I tried to reset my DRM by renaming the DRM under C:\ProgramData\Microsoft\Windows folder and by going to this Web site to upgrade:http://drmlicense.one.microsoft.com/Indivsite/en/indivit.asp?force=1
  • I've uninstalled and reinstalled Windows Media Player 12 and Windows Media Center via the function "functionality in Windows.

  I would be very grateful if a Microsoft technology could chime.  Thanks for your help!

  MY COMPUTER:
  DVD drive: TSSTcorp CDDVDW SH-S203N ATA Device (Samsung)
  Driver: Microsoft 6.1.7600.16384, dated 06/21/2006
  Graphics card: XFX ATI Radeon 5850 Black
  Motherboard: Gigabyte GA-X58A-UD3R
  Processor: Intel i7-920

  -Intel i7-920, Corsair 6 GB of RAM, ATI Radeon HD 5850, Gigabyte GA-X58A-UD3R, Corsair 800 d case

  Hello

  Try this free program:

  http://www.DVDFab.com/passkey-Lite.htm

  Carlos

• I can't play a dvd movie on my laptop HP 2000 product no. D1E81UA

  I can't play dvd movies. Do I need to buy something to make it work

  Hello:

  Your laptop must have the powerdvd software that allows DVD to play on windows 8.

  If you do not have this program, you can download it from the link below.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-123596-1&cc=us&DLC=en&LC=en&OS=4063&product=5360139&sw_lang=

• Unable to play DVDs on my Toshiba laptop

  I can't play DVDs on my Toshiba laptop.

  It started a few months there with DVD freeze. Now, I am unable to read DVDs at all.

  Tried a few internet solutions. Have also made approximtale six weeks ago and next to the factory. Have installed all Windows updates. Unable to read the DVD. Incidentally can still play CDs.

  Any idea what is the problem and a solution please.

  Thank you very much.

  Hello

  Can you please tell us what operating system you are using and what model of laptop.

  In any case, if your optical disc drive can read CD but not DVD, it is possible that the driver is defective or the lens is dirty.
  The first time, please clean the lens.

  If this will not help it is possible that ODD has problem with the calibration of the lens.

• Satellite A100-998: Vista - cannot play DVDs with Media Player and WinDVD

  I just upgraded my Satellite A100-998 to Vista. Nothing but problems. I can't play DVDs with Mediaplayer because my "video card does not meet the minimum memory requirement of 64 MB of RAM video.
  He tells me to update the video driver or install a new video card.

  I can't use Intervideo WinDVD to play discs because wnaspi32.dll is missing. I can download it on the web, but it becomes just as much as my office. Anyone know where I should put wnaspi32.dll and how much?

  Someone had this problem? How did you solve this problem?

  Thank you.

  First of all, I must say that I haven't noticed these issues after the installation of Vista. I installed it on the A100 and everything went correctly
  I put t know if you use a graphics driver right but necessary for correctly working Vista.

  The user Scooby1966 has posted a nice Vista tips:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=22503

  By the way: is the file wnaspi32.dll driver ASPI Nero burning application could install it. If you use Nero try to reinstall this app

• How can I play a Blu - ray disc

  Original title:?

  How can I play a blu - ray disc

  You need key components to play a Blu - ray disc. You need a Blu - ray drive for your computer, which can be purchased in electronic stores, if your computer did not come with one. You also need the Blu - ray playback software. Personally, I use Cyberlink PowerDVD as my go - to for playback of Blu - ray discs on my own computer, but there are a handful of other solutions. The reason main I like Cyberlink is that after having tried a variety of other solutions, he was the one who seemed to be most reliable and use fewer computer resources during playback. Here's a more detailed explanation of How to play Blu-ray discs on Windows.

• How can I play a dvd blue-ray on a Macbook with a great player?

  How can I play a dvd blue-ray on a Macbook pro with a great player?  I am running 10.11.5 of El Capitan on a MacBook Pro (retina, 15 inches, end of 2013).  The Superdrive rejects the dvd blue-ray.

  Super disks are not compatible with Blu Ray - you'll need to get a dedicated Blu Ray player

  Turn your Mac into the ultimate Blu - ray player | Macworld