Can't print my consecutive draws two all-in-one 6413.

The printer is connected to a wireless router with a network cable.

I print from a Windows 7 laptop connected wireless to the router, no security key only MAC address.

No problems when you surf.

Whenever I send a print or more than one I troubleshooting the printer, even if the first impression is OK the second attempt fails and I must resolve once again, turn the printer etc..

Removed and reinstalled driver using the latest version on the internet without success.

To install it as a network printer.

After that initial installation test page doing just fine, no problem.

Although it supports wireless printing I use it as a network printer not wireless.

Any idea what can cause this? Why the initial setting is not saved?

Hi adi7ch,

Follow the steps below and let me know what happens?

First step: clear temp directory

  1. Type %temp% term or search programs and files of field
  2. Select all the files in this folder, and then press the delete key to remove. If you receive a message that the file is in use, you will need to ignore this file (s).
  3. Proceed to step 2 below

Second step: downloaded and extracted to your system:

1 download the drivers and full software features

http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=MP-79309-1&CC=US&DLC=en&LC=en&os=4063&Product=3635397&sw_lang=

2. once the download is complete, double-click the file to extract the software.

3. when the installation window opens, press the Cancel button to stop the installation

4. tap folder in the race or search programs and files of field

5. Locate and open the folder starting with 7z (example: 7zS2356)

6. right click on the folder and select copy

7. close this window and all open windows, and then in the Middle the desktop right click your mouse and select Paste. This will move the 7z folder on your desktop.

8 open the 7z, that you just copied on your desktop

9 open the Util folder

10 open the CCC folder

11 start the uninstall_L4

12. once the uninstall is complete, restart the computer

13. run disk cleanup from the tools Accessories\ system under all programs folder

14. download and install the latest version of Adobe flash player

http://www.Adobe.com/support/flashplayer/downloads.html

15 open the 7z folder and then double-click the Setup.exe file that will be towards the bottom of the open window. Follow the instructions on the screen to reinstall your printer.

Let me know if you are able to successfully install the software and driver and are able to print & scan?

Tags: HP Printers

Similar Questions

  • Can I print a Fax from my all-in-one HP Laser Pro M1217nfw newspaper

    Is it possible to print sent & FAX logs from my all-in-one HP Laser Pro M1217nfw?

    Hi mb_pe,

    Yes, follow the steps below.

    1. press the button on the key

    2. arrow to the right reports and press Ok

    3. right to Fax reports and choose the report you want to print

  • Just installed Mac OS 10.11 (El Capitan) and now can't print from Photoshop CS5.  All other software including working Lightroom 4 mode "Impression".

    I just installed Mac OS 10.11 (El Capitan) and now can't print from Photoshop CS5.  All other software installed, including 4 of Lightroom, has not printing problems.  Contacted Apple and they said that it is a problem for Adobe.

    Help?

    When you reinstall CS5, you start to 12.0 there's a 12.0.4 update that includes bug fixes.

    You need to directly download this update and before you install, go into osx security & privacy > general tab and temporarily allow app installs anywhere.

    Adobe - Photoshop: for Macintosh: Adobe Photoshop 12.0.4 updated for Adobe Photoshop CS5

  • Need help printing on my C7280 Photosmart all-in-one Printer

    I use a Wireless/1100 Inspiron and have been able to print on my Photosmart C7280 all-in-one printer, but now I can too.  Help, please.

    Hello

    1. what happens when you try to print?

    2 have you made changes on the computer before this problem?

    3. do you get any error code or error message trying to print?

    I would suggest trying the following methods and check if it helps.

    Method 1:

    Run the fixit from Microsoft Fixit article and if that helps.

    Problems printing and printing errors:

    http://support.Microsoft.com/mats/printing_problems/

    Method 2:

    Try the steps in the following Microsoft article and check if it helps.

    Printer in Windows problems:

    http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

    Hope the information is useful.

  • Not able to find driver Win 7 (64 bit) for printer "hp psc 2410 photosmart all-in-one. pls help

    While I insert the printer USB cable to the laptop, it runs the Windows Live Update automatically and fails in the final task, the installation of the driver. It says "hp psc 2400 series - has failed.

    Then I removed the USB cable, removed the device of "devices and printers", reboot the laptop and then tried to load the driver manually. But in the window "install print driver", I could not able to find the driver for my printer ' hp psc 2410 photosmart all-in-one ' for the operating system of Windows 7 Professional (64 bit) under the "HP" manufactured.

    Can someone help me get this printer driver to use the Win 7 (64-bit) operating system? Thank you.

    Thank you, Sean. It has not solved the problem. Instead, I got to know that this will work with the 'HP Deskjet 6980 series' pilot and his summer work after I chose that one through the configuration of the local printer.

  • Where can I buy a bag for my all-in-one VAIO Tap 21 computer? VGPAMT21

    Where can I buy a bag for my all-in-one VAIO Tap 21 computer?

    The model of the bag is VGPAMT21.

    This b ag was sold out for the last 6 months online. Do you know where I can buy one elsewhere?

  • Unable to print on hp psc 1350 all-in-one of imac (os 10.6.8) but capable of scanning

    Unable to print on HP psc 1350 all-in-one of iMac (OS 10.6.8) but capable of scanning; also able to print other printers connected to the same computer.  The printer is connected directly via the USB port and I downloaded and installed software for printing on Mac using OS 10.6.  Shows the impression that labour is on hold whatever program originating the print job.  The State of the 'mistake' poster print job, but there is no information about error numbers or other details of the error. The correct printer is selected by default and layout is correct.  The printer has been disconnected, turned off and restarted and the computer has been restarted several times.  Able to print/scan/to 1350 PSC all-in-one of older Mac laptop (OS 10.5.8).

    Additional suggestions are sincerely appreciated.

    If you are using Snow Leopard or Lion and you have the HP software before Snow Leopard (either from a CD not marked as compatible with 10.6 or you recently upgraded to Snow Leopard or Lion and had the software HP on your Mac before you upgrade - even if you made a standard from the old software uninstaller or installed new software on top of it) , you must uninstall the software by using the "scrubber":

    Go to Applications/Hewlett Packard / click Uninstall HP
    Click on continue
    Highlight your device in the left pane
    Press and hold Ctrl + Alt + Cmd keys on the keyboard at the same time as you click on uninstall< this="" is="" the="" scrubber="" option,="" there="" is="" no="" button="" labeled="">
    There will be a pop up that asks if you are sure you want to uninstall all hp software. (At this point, if you continue, all HP printers you have installed will need to be reinstalled)
    Click on continue and let it finish

    Restart your Mac

    Now reset the printing system:

    -Sys Prefs, Print & Fax
    -Right (control) click inside the box that lists your printers and select Reset Printing System.
    WARNING - This will remove ALL your printers!
    -Select the sign + to add again. Search for the printer, select it, and wait until the button 'Add' becomes available. Until it clicks.

  • Bad or missing ink when printing or copying on HP all-in-one and color copier product families

    Click here for a description detailed steps for when colours or black are bad or missing when you print or copy on HP all-in-one and color copier product families.

    Determine if the problem is associated with cartridge

    1. the test report does not print correctly

    Check the estimated ink levels

    Check and clean the ink cartridges and the print carriage

    2. the test page prints correctly (for products only all-in-one)
    Step 1: Verify that the correct printer driver is selected in the software program
    Step 2: Restart the computer
    Step 3: Make sure that the correct printer driver is installed
    Step 4: Verify that printing in grayscale option is not selected
    Step 5: Select a color management profile
    Step 6: Determine if the problem is with the application software
    Step 7: Remove and then reinstall the all-in-one software

    Click on the laurels on the left side to help and click on accept as Solution to a solution. I work for HP.

    Best regards
    Kenneth

    I hope this helps!

  • New computer and can not get the HP Photosmart C5180 all-in-One Printer to install and work

    I downloaded which, in my view, is the correct driver and mild wear.  I had to get one new computer, my other crashed, I can't install the software that came with it because I now use windows 7.  However, he has worked in windows 7 on the other computer.  I need for my printer and scanner.  I get no answer or scan error if I pass him answers do not.

    Where should I go from here?

    There are exactly two downloads.  One is IrfanView itself and the other is supplements.  This is all you need.

  • AirPrint can't find my HP Photosmart D110a all-in-one printer

    I have the iPhone 4 with ios 5.0, and it does not find my printer HP Photosmart D110a all-in-one and an AirPrint-compatible printer. I have everything set up correctly. I have the current firmware on the printer. I feel, keep printing everything wireless, I can print on my printer using the printer email address I put in place. It's just to kill me because I can't get installation to Airprint. I went through all that HP and Apple. Everything I find is for ios 4 and below. Can someone help me?

    It is compatible:

    http://support.Apple.com/kb/ht4356

    http://www.HP.com/SBSO/printing/Mac/Apple-AirPrint.PDF

    I can finally AirPrint. When you sent the message on the router, it reminded me to update the firmware. I've updated to the latest firmware of the router, reset the printer and my iPhone, and it finally showed up.

  • Why can't get my HP Photosmart 2710 all-in-one printer to work?

    All-in-one printer, HP Photosmart 2710 don't scan.  Do I need a new or updated driver to date, and where I get it?

    I tried to reinstall it on my new laptop Toshiba, but he says it's incompatible.  It prints ok, just won't scan.

    Hello

    You can find thd drivers for HP Photosmart 2710 printer all-in-one from the link mentioned below.

    http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&LC=en&product=420428

    Note: You can download the drivers until Windows Vista. For windows 7, win 8 and 8.1 will have integrated pilot. You can also check in windows updates for the latest drivers.

    If you have configured your wireless printer. Note the printer ip address and enter in the browser where you will have an option of detection.

  • Can copy and scan but not print with my hp deskjet all-in-one 1515

    Hello

    Pls help! I can't print. I can scan and photocopy with my hp deskjet printer 1515 all-in-in-one, but I can't print. I tried to print with my computer laptop windows 7 and was able to print but I can't print using my regular laptop, which is a laptop HP 650 which uses windows 8.1. When I send a document to print is says it is printing and shows in the print queue and then disappears. What can I do? He has not even print a test page but it printed a page of information and the alignment of catrige page.

    Hello

    Please, try the following steps and let me know if that can help you:

    1. In the Control Panel, select uninstall a program and uninstall the driver software base HP Deskjet Ink Advantage publicly traded 1515.
    2. Click the R keys on your keyboard and the Windows Logo appears in the Run dialog box.
    3. Spool type and click OK.
    4. Open the Drivers folder, and then select the x 64 folder if you have a 64-bit OS or the w32x86 if you have a 32 bit OS
      Note: visit http://whatsmyos.com/ to find your type of operating system if necessary.
    5. Open the 3 folder, locate the HPBXPSRENDER. DLL file and rename it to HPBXPSRENDER. OLD
    6. Reinstall the latest version of the HP software:
      http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=Al-117537-4&cc=us&DLC=en&LC=en&OS=4158&product=5385208&sw_lang=

    Shlomi

  • Can not transfer photos to computer c4345 all-in-One printer

    On my C4345 all-in-One printer using windows Xp I can't transfer pictures from memory card to the computer. just the pictures won't transfer.

    With the memory card in the printer, go to the computer and click on 'start '.

    Click on 'my computer '.

    Looking for an icon of removable disk (memory card).

    Double-click on the drive and see if you can view information about the device.

    There are also the updates available for this printer.

    http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=228&LC=en&cc=us&DLC=en&sw_lang=&product=3546240

  • Size of printing HP Photosmart Plus e-All-In-One B210 series has sent a

    Hi, sorry in advance if I am dumb.

    How can I make sure the photo by email to my HP Photosmart Plus e-All-In-One B210 series are printed on 10x15cm photo paper?

    In fact, how I want to print any photo is printed on paper 10x15cm.

    Thanks for the research and forecast of some indication of this dilemma, I have

    Hi tabby1471,

    All photos sent by e-mail to print prints on a default size of the format 4 "x 6" photo. "

    There is currently no way to change the size of the paper.

    Thank you

  • Printer ink system failure message all-in-one HP 6180

    I can't print because of the error message following on my all-in-one HP 6180 printer screen:

    Ink system failure. Refer to the documentation of the printer Oxc18a0201. I followed all the recommendations on documentation of the printer, such as: installation later HP updates, turn off the printer and remove the power cord, remove all the ink cartridges and then putting back in when prompted. Also, I rebooted my computer. None of these recommendations have worked. I need help! Thank you.

    Hello Kah524,

    I met your questions and we have a solution for this and you can try it, but that would apply only on starting with '0xC18A' and not '0xc19a error codes.

    Try the following steps for Photosmart C7280:

    A. - Press and hold the "*" key.

    B. - Press the "#" and release both buttons.

    Display should say "enter special key Combo".

    C. - Press and release in sequence the buttons '1', '2' and '3 '.

    Display should say "Support" and display the FW rev (something like R0631R)

    Press and release the right arrow button until the display shows "Menu of the System Configuration'.

    Press and release the OK"" button.

    Display should say "hardware failure status. If it isn't there already, arrow above for "Hardware failure status"

    Press and release the OK"" button.

    Display should say "hardware failure status: clear." Press OK to erase.

    Press and release the OK"" button. Message becomes "hardware failure (breakdowns) resolved state. Press Cancel to continue.

    Press and release the "CANCEL" button as many times as necessary, so that, either the "Welcome to Photosmart Express" screen appears, or, the 'ink system failure' is displayed. DON'T TRY TO PRINT AT THIS STAGE.

    Using the power button, turn the power off and unplug the power cable from the back of the printer output and the wall.

    Wait 30 seconds for the power to get discharged and then plug the power cable into the wall outlet first, and then to the back of the printer

    Switch on the device. The printer may display message "USE POWER BUTTON CLOSING the PRINTER" followed by "Press OK TO CONTINUE". Press OK.

    If the printer has already initialized, then go to the next step. If this isn't the case, the printer will start the "ONE TIME INK initialization PROCESS". Allow this process to do and not to interrupt. Once the initialization is completed, the printer print a Diagnostic page.

    To check, features of the printer print a PAGE of TEST car. If SELF TEST prints, then printer is ready for use or installation of the software.

    If the error is still there, or reoccurs replace the unit.

    --------------------------------------------------​---

    0XC19a error messages, the printer can be retrieved.

    Good luck and if that fixes the problem please click on Bravo...

    ---------------------------------

    Although I am an employee of HP, I speak for me.

Maybe you are looking for