Can't scan via C4180 all-in-One (using Mac OS 10.6.8)

I've finally updated for Leopard (10.5) to Snow Leopard (10.6), and now whenever I try to scan, I get the error, "Sorry, scanner could not be initialized. (Scanner not found.) »

I was able to scan until I upgraded to, but now I can't. I can still print and copy very well and he seems not to have been updated since Snow Leopard came out. Will there be one for me to scan, or is it a different problem?

Hello

May you always have the HP Scan Pro application in the Hewlett-Packard folder or have you updated the software and that the analysis of HP?

If you still see the HP Scan Pro persists it means your software is not compatible with Snow Leopard.

Uninstall the software by following the HP uninstaller program.

Restart your Mac, download and install the software below:

http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=MP-77264-1&cc=us&DLC=en&LC=en&OS=219&product=1141647&sw_lang=

Finally, run the software update and try scanning using HP Scan.

For any question try scanning without using software HP as shown below and then check for the difference:

http://support.HP.com/us-en/document/c03583750

Shlomi

Tags: HP Printers

Similar Questions

  • Can not find the driver of scan to PRINTER ALL-IN-ONE KODAK ESP 5210

    Can not find the driver of scan to PRINTER ALL-IN-ONE KODAK ESP 5210. Device Manager says last driver is installed.

    Moved from feedback

    Original title: scan driver

    Hello Timmy,

    Please take a look at the following link for the driver\firmware for your printer.

    KODAK ESP 5210 All-in-One Printer Firmware - WINDOWS operating systems

    If this is not enough, you may have contact with Kodak support for the same. Thank you.

  • Updates from HP Photosmart C4180 all-in-One Printer

    Re: updates

    How download and install HP C4180 all-in-One Windows 7, 64-bit, automatically update?

    The printer works perfectly, made copies, scans and prints.

    Problem is that half of the HP Update message appears saying that "an update is available. I want to download and install it now? "Rest of the message is missing. I want to say a choice of Yes or no. Would appreciate your advice in a few steps if possible, not too technical. Thanks in advance.

    bel88eur

    You can try to download directly from hp.com.

  • How can I keep my HP1510 all-in-one to print the test pages as much?

    How can I keep my HP1510 all-in-one to print the test pages as much? My printer is connected to my laptop, and it seems that whenever I disconnect, want the printer print a test page when I reboot. I don't know where the option is to disable this option.

    Pages are likely alignment pages.  When a new cartrdige is installed the printer will print an alignment page which should be placed on the scanner glass and press the button of scan to complete the alignment process.  If the alignment is not complete it will repeat when the printer is powered suite or maybe at the end of print jobs.

    The alignment page will stop printing when the alignment process is complete.  See the page here for more information.

  • Can the HP MS-213. all in one memory Fund be upgraded to 8?

    Can the HP MS-213. all in one memory Fund be improved from 4 to 8?  I am running windows 7, 64 bit.

    4 is the maximum:

    http://support.HP.com/us-en/document/c01880718

    If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

  • Can I connect my HP4625 all in one directly on my ipad/iphone without using a wifi network. ?

    Can I connect my HP4625 all in one directly on my ipad/iphone without using a wifi network. ?

    Hi xxtopgunxx,

    Welcome to the HP Support forums.  I understand you want to print from your devices Apple to your printer Deskjet Ink Advantage 4625 without the printer is connected to a wireless network.

    It is possible that we can get the printer to disseminate its own network. Please note that the network will broadcast the printer will not have access to the internet.  Please follow the steps below:

    • On the front panel of the printer, please press the wireless button
    • By using the buttons on the right, highlight and select wireless settings
    • Highlight and select Restore Defaults
    • Select Yes. A message appears indicating that the default values of the network have been restored
    • Open your application settings on your Apple device, please
    • Please click on wifi and choose the network that starts with "HP-SETUP.  This should connect to your Apple device to the printer
    • Now you should be able to print using the 'Action' icon.  If there is not a print option when you press the action icon following all guidelines for Apple AirPrint

    If you go to print and your Apple device does not see the network, you will need to follow the procedure again. It should be at least 60 minutes before the HP - Setup network ceased broadcasting.

  • C4180 all in one photo print problem

    Hello

    I have a c4180 all in one, the photo editor, Paintshop pro X 2.

    My photo colors and sharpness are perfect on the screen, but totally different once print (colder and not as strong). Any advice?

    Thank you

    Hi lyll.

    On what kind of paper do you print?

    Also what other printed photos other applications or just the computer, are they the same?

  • How can I get HP 3015 all-in-one Scanner to work with Windows 7?

    How can I get HP 3015 all-in-one Scanner to work with Windows 7?

    Probably, you mean a Laserjet P3015 series multi function device?

    http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=UK&prodNameId=3815798&prodTypeId=18972&prodSeriesId=3815797&swLang=8&TaskID=135&swEnvOID=4062

  • C4180 all-in-one, bought 2007 - Dungeon error message color cartridge not installedcorrectly

    C4180 all-in-one, bought 2007-Windows XP - color cartridge not installed error message

    correctly. Replacement cartridge, worked well for two weeks, then the message came again many

    times. Removed the color ran only black. Clean the cartridge color (3/4 full) and clean the area inside

    where cartridge inserts, Reinserted. Worked OK for a week, then the message reappeared. While

    week, did not have access cartridges, just be added paper. Using genuine HP cartridges only!

    Looks like the error got stuck in the printer memory.  A hard reset should clear.

    To do a hard reset:

    1. Make sure that the printer is turned on.
    2. Pull out the power cord from the printer.
    3. Pull out the power cord from the wall.
    4. Wait 30 seconds.
    5. Plug everything up and turn on the printer.

    That should clear the error.  Let me know what happens.

  • HP OfficeJet 7310 all-in-One used to have the support of .pdf. Under XP. Have a legal version of Adobe 9.

    HP OfficeJet 7310 all-in-One used to have the support of .pdf.  Under XP.  Have a legal version of Adobe Acrobat 9 Standard.

    Will have problems with the printer fax function.  Has chosen to re - install the software disk.  Came across all sorts of questions.  Downloaded the latest drivers for 7310 / XP.

    Now the .pdf is not available.

    List of available options: HP Imagzone Express, e-mail, Microsoft Word, Paint, Microsoft Photodraw, Adobe Photoshop Album 2, Adobe Photoshop, Microsoft PowerPoint and save to a file.

    Used to have Adobe Acrobat.  He want to come back.

    Hello

    My suggestion: scan of Acrobat, it is much easier to control. Simply open Acrobat, create the file from a scanner.

    Kind regards.

  • How can I convert a text scanned a C5180 all in one for use in Word?

    I recently bought a new IMAC and spin the Mountain Lion.  When I tried to scan a document using the software that came with my C5180 all in one that I received a message that I have to use the Apple software to the place.  I followed the instructions on the HP site and succeeded to the digitization of the document.  My C5180 comes with OCR software that allowed me to convert the image into a text file.  When I scan text by using the Apple software I can create a number of different output - PDF, TIFF, PNG formats - but I can't edit in Word (or something else I think).  Does anyone know a solution to this problem before you spend $199 for Adobe Pro X?

    Thank you.

    Hello

    Capacity Unfortuinately OCR is more provided by the software solution provided for Mountain Lion.

    In addition, be aware that Adobe Pro will give you not directly from the scanning program - Adobe applications require compatible devices Twain, Mac OS drivers provided only with the support of the ICA-interface.

    You will need to use any 3rd party for this purpose OCR program, using Read Iris as an example will be more convinience because it support the ICA compatible devices.

    There might be additional OCR solutions, I don't personally know this.

    Kind regards

    Shlomi

  • Newly purchased HP 7520 does not scan the e-all-in-one in color on mu Mac OS 10.9

    Need help, totally frustrated.

    Just installed a brand new HP 7520 e-all-in-one on my new MAC OS 10.9. The product prints and copies in color. However, all scans come out in black and white?  Who can help me, desperately in need of time. I have the printer what USB connected.

    Elske

    Hello
    The workflow default scanning set up to scan documents in black and white. Be sure to change the settings for scanning to scan color documents:

    1 open the HP utility and select your device.
    2. based on Scan Settings open the "Scan to Computer".
    3. click on the tab scan tasks.
    4. Select the affected shortcut and click on change... (or double-click on the shortcut).
    5. in the section of scanning from an HP device, click the blue triangle or button view details to expand the menu.
    6. in the expanded menu now, open the drop-down next to the Mode
    7. now select the color option, and then click OK to save the changes. The next scanned using this workflow is displayed in color.

    Kind regards
    Shlomi

  • HP ENVY 4500 e-all-in-one printer/Mac OS 10.6 / cannot scan multiple pages in the single file/document

    Mac OS X 10.6.8

    HP Scan app 4.4.1

    In the ENVY of HP printer 4500 e-all-in-one support page for scanning with a full feature driver installed. Under "how to scan an original of several page into one file for HP Scan version 4.0 of the software. Everything is okay until after I scanned the documents and click on 'Done '. (Step 6) & click send , click the folder , name your file, and then save the file on the computer. (Step # 7)

    Is where I'm going wrong. I can't find the Format drop-down to complete steps 8 and 9.

    1. Click the dropdown Format menu, select the content , and then check the box to Save all items in a single file .
    2. Click Save .

    Hi milolo,

    Thanks for your post and welcome to the HP Forum.

    Please make sure that you select PDF or searchable PDF as the Format. You should then find a box to check the 'combined in one document.

  • Scanning with HP all-in-one printer with fax and scan Windows in Windows 8

    When you install a printer driver in Windows 8, you can scan from your computer without having to install any additional software to HP. This is particularly useful if you want to or not does not require the full functionality software or if your printer does not have a driver to scan for Windows 8.

    Windows Fax and Scan uses a Microsoft Service called WIA (Windows Image Acquisition) to capture an image from the scanner and allow you to save without the need for additional drivers.

    In addition, Windows Fax and Scan cannot scan to PDF.

    Learn how to analyze with your all-in-one printer from HP using Windows Fax and Scan.

    If you have problems using Windows Fax and scan with Windows 8 make a post below. I hope this helps anyone looking for an alternative method of scanning in Windows 8.

  • Scanning in an all in one

    My AIO has an ADF that will contain only 35 pages. So, if I want to keep in a single file documents more than 35 pages (IE... 57 pages) how they can all be scanned and stored in the file of the asme. I heard of merging of files but have no idea of what is or defeinately do not know how to do this. Any help would be appreciated.

    Hi tazawoo,

    I understand that you have some questions analysis about your all in one HP printer. I'd love to help you with your questions!

    According to what specific printer you have will determine exactly what your software looks like, but I'll assume you have a newer printer that uses our latest software at the moment. If I'm incorrect, please reply back with your HP printer model number .

    For this, I would recommend open on your PC HP printer Assistant (should be an icon of a printer with the name of below) and run the scan from there. With your printer ADF being able to hold 35 pages, what you want to do is put about 35 pages into your ADF since your document pages 57 and let them finish the scan. Once they have finished, place the other 22 sheets in the ADF and then on your computer screen where it shows you the scanned pages, you should see two buttons near the lower left corner. You want to rely on one that looks like a piece of paper with the symbol on it. It will then continue to feed pages and save it all in a single document in the end.

    Hope this helps, have a nice day!

Maybe you are looking for

  • How to import pictures from iCloud drive Photos on iPad?

    Sorry, that should be so simple, but it isn't. I poured a folder of photos from my macbook to iCloud by car. No problem. Then, I wanted to import these images into the folder of drive iCloud on my iPad in pictures... How can I do this? Is there not "

  • Create a table and populate it programmatically

    I create a new VI with an array of strings using VI scripts.  Now, I want to fill this table to an array of constant strings.  What is the best way to achieve this? Here is a screenshot of the code I have for now.  I have filled the first element of

  • Is it possible to wait in a queue and a reporter at the same time?

    Hello! I'm trying to implement a model event producer/consumer with queues. The problem is that I have a certain value change events (for example from a slider) I want to make the tail upward; I want only the last value change events to be processed

  • Home premium 64 bit Vista 6.0 SP 1 hang time start

    My new HP dv 7 has a boot hang on microsoft specifications load bar screen for about 4 + minutes, with no HARD disk activity, then it starts again beginning upward. During the process, the CD/DVD drive is repeatedly powered (light and buzzing) until

  • Cannot sign the application - cannot find the signature key file: author.p12

    Hi all. I have seen this error on several messages in the forum, but none of the suggested corrections works for me. I am signing my App BB10 ready to be distributed. It draws very well and I also installed the two relevant files of the LSB and follo