Can't see all networks wifi on initial Setup
There was a problem with my original Touchpad (it does), so I sent to HP and just received my refurbished model. However, when I start the initial setup and it asks me to connect to a Wifi network, none appear, even if my network and my neighbors are all visible & active.
My network configuration has not changed since my original Touchpad, which connected very well, so I don't know why this one should give problems. Any thoughts? It is extremely frustrating that I can still use my new Touchpad!
Following my previous post, I called HP, explained my problem and they sent me a replacement. The new (renovated) came in a few days later and it connected to Wifi without problem. I proceeded to the initial installation and have no problem with this new unit.
So, for all those who still have a problem with an inability to see any Wifi access during the initial installation points, contact HP and explain your problem. If you are able to upgrade to 3.0.4 use WebOS Doctor, do this and confirm that your Mac address is all zeros. This seemed to be the point of triggering of a replacement for me.
Good luck to all! I'm going to use CM7 .
Tags: HP Tablets
Similar Questions
-
I can't see second network interface integrated through Esxi 4.0 on IBM X 3200 M2
Hi everyone, I can't see second network interface integrated through Esx 4.0 on IBM X 3200 M2, I installed and configured a first NIC and the third card PCI-express NETWORK Broadcom NetExtreme without any problem. Above their Esxi platform, I have installed two operating systems comments, but I need the second network adapter for vmware management. Now, I use the first network interface integrated to do this, but is not quite secure. I can't reinstall ESX because this system is in production.
I have read the information, but I can't understand how do.Thanks, Claudio
Welcome to the community,
I checked the compatibility of your equipment with ESXi4.0 and result in not supported. (Check in HCL )
IBM IBM System x 3200 M3 Intel i3/i5 Clarkdale series ESX 4.1 U1 4.1 4.1 U1 4.1 ... IBM IBM System x 3200 M3 Intel Xeon 34xx series Lynnfield ESX 4.1 U1 4.1 4.1 U1 4.1 ... Can you post here a model of all the network cards?
Thank you
Please, do not forget the points of call of the "useful" or "correct" answers
Mauro Bonder - moderator
-
I would like to have instant access to all my favorites that I keep my RSS links and ongoing projects there. When they are too many to fit into a line across the screen firefox makes a small drop down menu at the end with everything else in. I find it really boring, it's just the same thing as the bookmarks menu normal; I find it really hard to keep things organized when I can't see all the time. I would like to make a second or even third place in the toolbar, so I still see all my current RSS feeds and Pages. Can I do this? If this does not work on firefox someone know another browser FS, BONES or FREE software that will be?
Try this extension:
https://addons.Mozilla.org/en-us/Firefox/addon/6937/ -
Hello. How can I see all my appointments for the year calendar of windows at the same time?
Thank you.
Majid of AfghanistanHello Mack,
It is not possible. You can only show monthly appointments at one fell swoop.
You can view the following items:
Create a family calendar with Windows Vista
You can download Windows Live mail and check if you get this option there.
Windows Live Essentials: Other programs
Also check out the link:
-
I upgraded to IE 9, now I can't see all the images. How can I fix it
I can't see all the images on the sites Web or on explore all I have is the script.
Try this
http://Windows.Microsoft.com/en-us/Windows-Vista/why-cant-I-see-the-pictures-on-a-website
-
Cannot open links in electronic-mail/does can not see all the pages option
(1) in some of my emails (Windows Live), I have only an icon where there should be text, photos, etc. I tried to reset my security settings but nothing helped.
(2) when I opened the pages, IE the list of modules, I can't see all of the selections. There is only a partial view of the elements. When I scroll down, it always gives me a partial view of the next item on the list.
I use Windows Vista, IE8 and Windows Live Messaging. I have a 32 bit OS.
Paula Vista user
(1) in some of my emails (Windows Live), I have only an icon where there should be text, photos, etc. I tried to reset my security settings but nothing helped.
(2) when I opened the pages, IE the list of modules, I can't see all of the selections. There is only a partial view of the elements. When I scroll down, it always gives me a partial view of the next item on the list.
I use Windows Vista, IE8 and Windows Live Messaging. I have a 32 bit OS.
Paula Vista user
I would START by checking if your IE8 has all its flaws. Any time we're not able to open links in emails, the Internet Explorer problem, the majority of the time.
Start button > Default programs > Set Your Default programs > left side, select Internet Explorer...
He said "this program has all its defaults"?
If not, click on choose by default for this program > tick on each entry in the list > saveSee if that solves all the problems you have.
P.S. Check with your shipper, see if your sender uses Microsoft Outlook. If so, ask your sender to go to the Format of the mail and select HTML.
t-4-2
-
Hi, I have a question. After installing this program in my (brand Asus k 4 table) the icon of my program its very small and I can not see all of the icons...
What exact version of After Effects you are trying to use? 13.7.1 is?
-
Hi, I can´t see all my programms installed creative cloud. What can I do?
Contact adobe during the time pst support by clicking here and, when available, click on "still need help," http://helpx.adobe.com/x-productkb/global/service-ccm.html
or you can install it directly.
Available downloadable Setup files:
- Suites and programs: CC 2015 | CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
- Acrobat: DC, XI, X | Suite X | 9,8 | 9 standard | 8 standard
- Captivate: 9 | 8 | 7 | 6 | 5.5, 5 | 1
- Cold Fusion: 11: 10 | 9.0.2 version 9.0.0, 9.0.1, 8.0.1, 8.0.0, 7.0, 6.1, 6.0, 5.0, 4.0
- Contribute: CS5 | CS4, CS3 | 3,2
- FrameMaker: 12, 11, 10, 9, 8, 7.2
- Lightroom: 6.4| 6| 5.7.1| 5 | 4 | 3
- Photoshop Elements: 14,13,12,11,10 | 9,8,7 win | 8 mac | 7 mac
- Premiere Elements: 14,13,12,11,10| 9, 8, 7 win | 8 mac | 7 mac
Download and installation help links Adobe
Help download and installation to Prodesigntools links can be found on the most linked pages. They are essential; especially steps 1, 2 and 3. If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".
-
I can't see all folders in library mode because my hard drive had to be replaced. How to restore files and photos, so I can link to the catalog?
The original drive I had was called E:... THAT IS, FILE NAMES ARE!
If you would like to recommend that I go to each of these lines and redirect each of these folders, right?
Yes, reconnect the top-level folder on drive E:, as shown in Figure 4 here: Adobe Lightroom - find folders and files moved or missing
-
Where can I see all my muse CC sites and remove 1 or more?
Where can I see all my muse CC sites and remove 1 or more?
Hello
You can click on the link below and then you can get the list of sites published by you.
http://BusinessCatalyst.com/PartnerPortal/index.html
Once you sign in with your Adobe ID and password, you must left click on my Sites and you will get a list desired by you.
Concerning
Vivek
-
How can I see all my sons...
Please notifyMethod iii) let your username your number - works for me!
and Mr. 960127 for you
-
where can I see all the business rules that are running
Hello
We said that it does not exist in our planning v11 but can't find it.
where can I see all the processes (such as business rules) that users are running?
Thank you.Hello
They probably meaning that the work console > tools > console work.
More information > http://download.oracle.com/docs/cd/E12825_01/epm.111/hp_user/job_stat.htmlSee you soon
John
http://John-Goodwin.blogspot.com/ -
Can not see all the networks Wi - Fi on Satellite P755-S5263
Hello
Just unwrap my gift: Satellite P755-S5263 and he can't see any wi - fi, I'm in the city and see a lot of networks on my BB and I press the touch button below the LCD for WE / OFF radio, nothing help, just orange light on the light wi - fi.
No problems seen in Control Panel / networks, see Intel(r) WiFi Link 1000 BGN, works correctly and enabled, version of the 14.0.0.2 drivers.
Is there any other secret of installation/swith that I don't know!I am on Windows 7, I really want to work today, appreciate your help. Thanks to all the guys.
Gracias
ViktoriaHello, Viktoria
Perhaps is not activated WLAN card correctly?
Please use the FN + F8 key combination and remember the wireless network adapter is correctly enabled.
I hope this will help you.
-
Home Lab question - why can I not see all network cards three?
Hello
I n the VCP5 exam preparation, I'll set up a small laboratory at home. I wanted to try things like grouping NETWORK adapters and dvSwitches, so I added 2 additional ethernet adapters to my host computer.
My host has all the cards of network three visible from the Device Manager. The workstation 8 running on the host computer, I have a virtual machine with Server 2008 as a guest operating system. Since the Device Manager on the guest operating system, I see only one of the three ethernet cards. I did the installation of this virtual machine with an open networking.
What could be the reason that I see only one of the three cards, and what can I do about it so that I would be able to see all of them?
Thanks for any response.
Maybe http://boerlowie.wordpress.com/2011/11/30/building-the-ultimate-vsphere-lab-part-1-the-story/ can help a virtual lab deployment.
André
-
Bluetooth Vista Assistant can't see all devices
Hello. I'm having a problem that began recently. The bluetooth in 32-bit vista Wizard can't see devices trying to connect with. I can connect to nokia pc suite well and I can receive a file from a device, but I can't send anything because he is unable to see my phone or any other phone.
I recently installed windows 7 64-bit and dual boot with vista 32 bit. I installed 64-bit for the (hp bt450) bluetooth adapter drivers and it works great on windows 7, see all devices, that I try to connect. I use drivers correct 32 bit with vista with the latest firmware.
Could the second os cause this problem somehow?shalinnathan143,
You have a similar but different problem. We want to stay focused on the original question here. Trying to meet all of you in a thread will only complicate things no one will know who meets who what about. Please repost your problem as a separate issue.
Thanks and good luck.
Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
Maybe you are looking for
-
Upscaling 480 p to 1080 p - an impossible task?
I have pictures of 720 x 480 I'm upscale up to 1920 x 1080. This is obviously a huge leap, perahps too huge to be feasible. Yes, 480 p to 720 p can be OK but p 1980, probably not. Do you know the guys from anything that could do this for me? I tried
-
Opening files Labview using Python
I was wondering if anyone knows a way to open a file of many windows and Labview project it using a language like Python script. At the present time, I have to open the project file and then manually open several screws connected to this project file
-
HOW DO I GROW FROM 100 TO 125 I HAVE PROBLEMS WITH MY EYES?
I HAVE PROBLEMS TO LIGHT. I JUST GOT THIS AND IT OF NOT LIKE WINDOWS 7 HOW DO I FIND A WAY TO EXPAND MY SCREEN?
-
content of the images not displayed
When I transfer pictures from my drive flash or camera the photo content is no longer displayed on the floor unless I click on each individual tile and open to display the photo.
-
VIsta 32-bit OEM - > 64 bit on a new computer (old laptop broken)
Several years ago, I bought a laptop with Vista 32 bit OEM. Sometimes the in ' 08 the laptop broke and I would like to use ot that copy of Vista for a new desktop computer I own now. I need to be 64-bit, however. Is the license vista 32-bit to 64-