Can't see "Properties".

Similar Questions

• Can someone tell me why I can't see my reference grid? I think that all properties are ok?

  I can't see the starting grid, can someone help me?

  Reference grid appear not so hidden on the view menu, if you are using the preview or preview overprinting or are zoomed out beyond the threshold value set.

• I can't see e-mail messages about my local folder on the drive location. Paranoid.

  I am moving pop, IMAP and in the process try to archive many messages in not-very-active topics/folders to my local files. All this seems to work _great_. My messages are archived just where I expect to be, and I can see _in Thunderbird_.

  But, when I go to the location of records them attest to 'Browse' in the account settings for local folders, I can only see .sbd files. These sometimes have subfolders for _some_ subfolders in my local folder structure (but not all). I see no message. In some cases properties indicate that the folder has a size large.

  BUT I want to be able to leave with my e-mail address if something goes wrong. Where are my emails? How can I configure T-bird so that I can be comfortable that they will survive the disappearance of the T-bird, or some other misfortune (assuming I have back up.)

  Thanks in advance.

  Re: try to check many messages in not-very-active topics/folders to my local files.

  So you are not checking them in the sense of using the archive feature. you just create folders in the "Local folders" account and penetrating the files out of the emails Pop e-mail account.

  Please provide the following information.

  First check that you have this set:
  View > folders > all the
  or
  Icon of the menu > folders > all the

  • Then after a picture of the folders pane, so that we can see your "Local folder" and all the files in that account.

  Can make folders and hidden files visible:

  • http://KB.mozillazine.org/Show_hidden_files_and_folders
  • Help > troubleshooting information
  • Click on "view the file.
  • Click the folder "mail".
  • Click on "records the.
  • Post a picture of the Local content folder.

  If you have created files in a folder (subfolders), it creates a file with a .sbd extension.
  Thus, for example, if the Inbox subfolders, then you will see an Inbox.sbd folder.

  • Click the *.sbd folder.
  • Please post image in the folder *.sbd, display the contents of the folder.

  If you have more than one + .sbd file, please post images to display the content.

• whenever I open my email or internet only 3/4 of the screen appears and I can't see / click on the maximize button. I'm on xp. Help, please

  I'm not too good at the technical jargon. Please be gentle with me :)

  Hello

  It seems that your screen resolution is set too low.

  • Close all your programs (if you can't see the close button, right click on the taksbar icon, and then click close)
  • Right-click on an empty part of the desktop and then click Properties
  • Click on the settings tab
  • Move the full screen resolution slider to the right
  • Click OK
  • If you are prompted to confirm the change, click Yes

  Tricky

• in Outlook Express, how can I send the same message to a group important (in the address book already), but have to each recipient can only see his name (not the Group)

  In Outlook Express, how can I send the same message to the large group (already in the address book), but have to each recipient can only see his name (not the Group)?

  To use the functionality of the BCC (Blind Carbon Copy), in a new message window, click View | All headers and type the addresses separated by a; Or: Click the button to. You will see your list of contacts and the choice to put them in the To, CC, or BCC field. Click on an address, and then click BCC to add it. Repeat for all of the contacts you want. (Note: most of the providers have limits as to how many messages you can send both a. 25 is common, but it varies).

  Put your own address in the box to. That's the only name/address that any recipient will see. If you leave the field empty, some people may not receive e-mail because of message rules they put in place, or restrictions imposed by their ISP.

  You can also make an entry in the address book using your e-mail address, but put something like the mailing list in the area of the display.

  *********************

  You can also create groups if you send e-mail to the same people often.

  To create a group of contacts:

  You can create a single group name (or alias) to use when sending a message to several contacts at the same time. Just create a group name and add individual contacts to the group. Then just type the name of the group in the box for when you send mail.

  1. in the address book, select the folder in which you want to create a group. Click New in the toolbar, and then click New Group.
  2. the Properties dialog box opens. In the group name box, type the name of the group.
  3. There are several ways to add people to the Group:
  a. to add a person from your address book list, click Select members, and then click a name in the address book list.
  (b) to add a person directly to the group without adding the name to your address book, type the person's name and e-mail address at the bottom of the Properties dialog box and then click Add.
  to add a person to both the Group and your address book, click New Contact and enter the appropriate information.
  (d) to use a directory service, click Select members, and then click search. Select a directory service in the drop-down list at the end of the text box. After finding and selecting an address, it is automatically added to your address book.
  4. Repeat for each addition until your group is defined.

  Note

  a. to view a list of your groups separately from the list of address book in the address book on the view menu, make sure that folders and groups is selected.
   
  b. you can create multiple groups, and contacts can belong to several groups.

  If you want to send to a group without addresses are displayed for each recipient, open the address book and make a new entry. Enter the name of the group in the area of the display, but use your address. (Some Internet service providers require a legitimate address in the line to and recipients will know it's from the Group).

  Click on the button to. Enter the name of the group using your address. Enter the group in the BCC field.

• Can't see installed and shared printer

  I can't see my hp printer installed and shared on a new Lenovo A58e ThinkVantage Desktop PC with windows XP from ThinkPad running windows XP.

  I have set up working groups as well, appropriate manually and by the network installation wizard.

  I have a checked and made sure that the file and printer sharing are enabled in the network adapter properties page.

  I checked in the Toolbox of Lenovo and it says that the file and printer sharing is enabled, so the printer is shared also.

  I also disabled McAfee firewall and Windows Firewall.

  NOTE: I met a similar problem before with ThinkPad Laptops, when the file and printer sharing would not stay active in the properties of the device, found the problem being to think software, specific to 'Think access', the software kept turning off files and printers, sharing, so I allowed him by the profile of the software Manager, and all laptops could see file sharing and printer.  However I don't see any 'Think access' software, just the 'Lenovo' Toolbox

  Thanks for your time, everyone.

  go to the network properties and install the IPX/XPS/Net bios strictly only for printer sharing network card only.

• where can I see the photos 'print screen '?

  where can I see the photos 'print screen '?

  They are in the Clipboard. If you paste into a paint program (type mspaint into Start - Run all programs - accessories -) or a text editor (Start - All Programs - Accessories - Wordpad). Also see the tool captures to capture the screen (Start - All Programs - Accessories - Snipping Tool).
   
  Copy the screen [Prev |] Next | Content]

  PRT Scn	Copies the entire screen to the Clipboard as a graphic or the screen with the mouse if you are using multiple monitors. Use MS Paint to paste the picture. It is also known under the nameof Office Snap. According to the key parameters of Prt Scn tab Misc properties of a Dos program, a program back can still print on printer Prt Scn keyed.
  ALT + Prt Scn	Copies the active window to the Clipboard in the form of a graph. This is also known as theWindows Snap.
  CTRL + Prt Scn	Copies the entire virtual screen when you are using multiple monitors in the Clipboard in the form of a graph. Unlike the other two screens to Print that precedes this one doesn't seem to have a name, or if so, it is not listed in the header of the window files.
  CTRL + Alt + key number minus button	Copies the active window to the Clipboard of remote desktop in the form of a graph (same as thePrt Scn locally)
  CTRL + Alt + number Pad Plus key	Copies the entire screen to the Clipboard in office to distance in the form of a graph (same asAlt + Prt Scn locally)

  Such programs that Outlook Express do not allow paste not web graphs. Paste into MS Paint andrecord under a web graphics. If the screenshot by email sending save it as a jpeg, gif or png file before sending (in MS Paint,file - save as, and then choose a format in Save As Type). The color isn't usually important for the screenshots is a way to make a really small file save as a GIF (this reduced to 256 colors), and then save the Gif to Png (lossless and better than Gif compression) or Jpeg (lossy).

  To take screenshots of the menus in the current use of the window the Alt key and hold it down during the entire procedure. ALT + a touch of letter to access the menus, then the keysdirection to move the selection, then Print Screen. Release Alt.
  --
  .
  --

  "Chrystalstrick" wrote in message News: a6a8f42c-03e9-429 d-91e8-6bca342fa0c6...

  > where can I see the photos 'print screen '?

• Connected to my tv I don't see screensaver and icons. How can I see the icons? __

  I have connected my laptop to my TV, but cannot see that my screensaver. I can't see my screen icons or toolbar. How to see these?

  Hello blueboro,

  1. are you able to move the mouse on the secondary monitor (TV)?

  2. How have you connected your TV to the computer using VGA or HDMI?

  You can try the methods below to resolve this issue.

  Method 1:

  It seems to me that the TV is set as a secondary monitor and all the icons are displayed only in the primary monitor.

  I suggest that you try adjusting your TV as primary monitor and check if the icons and the taskbar appear in TV. You can also check if the monitor is set to double in the mirror of the office.

  You can access these options:

  a. right-click on an empty space on the monitor and click graphics properties.

  b. you may have to the option that says, in double or mirror monitors.

  You can see the underside of article that will give you more information on this parameter checking:

  http://Windows.Microsoft.com/en-us/Windows-Vista/multiple-monitors-frequently-asked-questions

  Method 2:

  If this parameter is already defined, I suggest that you try to update the drivers for your graphics card as your current version of the graphics card could not support multiple views. You can check the below article which will give you information on how to update the drivers:

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  Thank you
  Irfan H, Engineer Support Microsoft Answers. Visit our Microsoft answers feedback Forum and let us know what you think.

• The sp1 and sp2 already included if I just reinstall vista hp? Windows Update is not offer them and I can't see them in the history of the update.

  The sp1 and sp2 already included if I just reinstall vista hp? Windows Update is not offer them and I can't see them in the history of the update.

  We do not know what is on your HP recovery disks.

  Click Start > right click on computer > properties > he'll tell you he which SP you have installed.

  For all Service Pack/Windows Update issues:

  Windows Update Forum:

  It comes with Vista, upgrade install and activate Forum.

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  You will receive the best help here.

  See you soon.

  Mick Murphy - Microsoft partner

• Windows 7 network can't see multiple devices on the network

  Hi all.  I'm about to leave my hair on this issue - I hope someone can prevent the horror that would be me without hair.

  I am running Windows 7 Home Edition on a personal computer that is connected via cable to a router UVerse also providing my home with wireless services.

  A few months ago, I could see - of my PC, network and devices and printers - the two PS3, XBox systems and Samsung TV devices that are connected to my wireless network.  Apparently randomly, my computer has ceased to be able to see these devices.  After trying everything I could think of, I've finally reformatted the system (before Christmas) and everything was good again until last week when my computer stopped once more to see these devices.  I * really * don't want to reformat my system again...

  Here are some details on where I started after the last reformat:

  The PC is connected to a homegroup.

  The PC has a wired connection to the router.  The devices are connected over wireless.

  The firewall is turned on.

  AVG anti-virus has been activated.

  Network discovery, file and sharing printers and streaming media are all enabled.

  Password sharing is disabled.

  Devices could stream Netflix/Hulu as well as files on my computer (using the PlayOn Server - I've never used WMP).

  Now my devices can still Streaming Netflix/Hulu, but not the files on my computer.  The PC can't see the devices and the devices cannot see the PC.

  Here is a list of most of the things I've tried to solve (although I've done so many things, I probably don't forget some):

  I added the PC to the wireless network, so now that it is connected both cables and wireless.  I even tried to fill these connections, although I removed the bridge when I saw that there was no difference.

  I have disabled the firewall completely.

  I disabled the AV entirely.

  I switched a residential group to a working network and vice versa.

  I gave you the assigned IPs devices in the router configuration.

  I've rolled back all the windows updates installed since the last time the devices showed in the PC network.

  I've removed the devices on the network, reconnected the and reconfigured to ensure that they have the media streaming (if applicable).

  I did several reboots the PC, the router, and devices.

  I added the PlayStation Network and XBOX Live and applications hosted under NAT/game on my router.

  I have enabled file sharing for devices that use 40 encryption or 56-bit.

  Additional troubleshooting information:

  When I try to add a device using the Add Device dialog box, no device never shows.

  Under media streaming options, when I look at instruments under all the networks and Local network, no unknown device only shows (even in WMP).  All devices that * show are already set to 'allow '.

  If I have access to my router configuration, the devices will appear as connected.

  I can ping devices from the PC.

  I searched endlessly on the Internet (including other threads on this forum) and have tried all of the suggestions I thought.  The only thing I can't do is activate uPNP on my router because routers Uverse do not offer this option.  However, I don't think that it's important because my PC could see these devices for some time after my last reformat and made no changes to the configuration of the router.

  Because multiple and different wireless devices are involved, and because a reformat solves the problem, in my view, it is a Windows problem, but I can't understand what to change on my system to make things work again.

  Anyone have any ideas?

  Hello

  Thanks for posting your query in Microsoft Community.

  It's a shame that you have to format the system first and now, the problem still persists. I really appreciate the efforts made to try to resolve the problem. This can be due to any dispute of third party software due to which the connection failed. I suggest you follow the methods below and check.

  Method 1: Run the network troubleshooter to diagnose the problem.

  Run the network troubleshooter

  Method 2: start the computer in safe mode with network and then perform the clean boot.

  Step 1: restart the computer in safe mode with network and check if the problem occurs, proceed as in the link:

  See: , start your computer in safe mode

  Step 2: If the safe mode with network works, perform clean boot and check if any third-party application is causing problem.

  Put your system to the clean boot state helps determine if third-party applications or startup items are causing the problem. You must follow the steps in the article mentioned below to perform a clean boot.

  How to perform a clean boot in Windows

  Note: see 'How do I reset the computer to start normally after a boot minimum troubleshooting' to reset the computer starts normally after troubleshooting.

  Method 3: To enable the network devices to display on the network map, they must meet four requirements:

  • Must be a HOME network or work: Mapping network only display the devices connected to a HOME network or WORK location. Devices connected to a network PUBLIC or FIELD cannot be displayed using the network card.
  • Devices must be DETECTABLE: The network discovery setting allows devices to be able to be seen by other devices on the same network. For more information, please consult: , enable or disable network discovery
  • Devices must comply with the LINK LAYER TOPOLOGY DISCOVERY Protocol: Topology Discovery LLTD (Link Layer) is a protocol developed by Microsoft to enable networked devices to 'discover' each other. If a device does not use the LLTD protocol so it can not be displayed in the network map. Windows 7 computers have the LLTD protocol implemented.
  • LLTD must be enabled on your LAN connection properties: The Link Layer Topology Discovery Mapper of e/s driver and the Link Layer Topology Discovery responder must be enabled on your local area connections properties panel.

  To check LLTD is enabled, you can refer to the following steps:

  a. Select open network and sharing Center by clicking on the icon of your network down to the right of your task bar:

  b. now, click connect to the Local network

  c. now, click on Properties

  d. ensure that two LLTD options below are selected (by default, these options are still enabled in Windows 7).

  From now to try the methods above and let us know the status. We will be happy to help you further.

• I can't see my pictures using Windows 7 Premium. I get a message that I don't have permission to open it.

  Real user frustrated here.  I had no problem opening and viewing my photos until recently.  I don't know if this has nothing to do with the activation of my smart TV to access my pc and see these photos, but the timing seems too coincidental.  Now, when I try to view my pictures in Explorer mode and using the image viewer, I get the message, "Windows Photo Viewer cannot open this picture because you don't have the appropriate permissions to access the location of the file."

  I've included some screenshots to show you what that my security on the file properties tab:

  

  

  

  It seems that the only way I can get to see these photos is to go through each and every one of them and click on the Advanced tab and change the permissions by removing those listed as the Group weird UID and then add my pc and allow full control, I can then see the photo, but again, I must do this for EACH picture I have at least a 1000.  Suggestions as to the current operating system and if there is a quick way around this?  Note that I did this one at each front and now there is also a handful of photos I can not display.  It's as if they were changed to the original user.  What is going on???  Help!

  Thank you Ramesh sponsor!  I tried, but as the process began, he grew up an "access denied" that it travelled all the files he was trying to change permissions for.  It seems that I can do this for each individual file, but not for the record as a whole.  Still puzzled.

  Dean,

  Take ownership of this folder and try again then assign permissions. See:
  http://www.Winhelponline.com/blog/take-ownership-of-file-or-folder-Windows-7-Vista/

• The computers on the home network can't see the other

  Hello

  Portable Windows 7 Ultimate my two computers cannot see each other on the home network. Both have their firewall off the coast. We have McAfee installed (but disabled). I can't ping or computers. Both are on the same workgroup. Both are on the home network. Both have their network discovery is enabled. Both have active LLTD protocols.

  A computer cannot find homegroup on the other computer. I tried both ways. All important services are successfully started and running. No problems with network connectivity to the internet. I can ping sites like google.com and yahoo.com. I can't just ping the other laptop on the network. Any ideas?

  Thank you

  SS

  FYI: I have UltraVNC running on both computers. However, the program does not work b/c computers can't see each other. I also have LogMeIn installed on both. This works because logmein works via the internet.

  Hope that you have found your answer now. I had the same problem and mine was the computers have been appointed the same you have he tried but if not try this:

  ·        Step 1) on your keyboard, press the 'key Windows and pause pause' to bring up the 'System Menu'.

  Step 2) when the "System menu" appears on the lower right, click "change settings"

  Step 3) click on "change" on the "System Properties".

  Step 4) Change the 'computer name' (must be DIFFERENT! to other computers)

  Step 5) press "ok" (you will get a pop up just press ok)

  Properties of step 6) on systems ""change "" the ""computer name " the same as the one on (step 4)"

  Step 7) click on ""okay ' and let the computer to restart (If it does not restart just disconnect and reconnect) "

  Follow these steps and you shouldn't have a problem.

• How can I see my file to unmask?

  How can I see my non-hidden file?

  If it's in My Documents,

  Right-click on the My Documents folder, and then select Properties,

  Check the hidden box and click on apply, this will change all folders / files to hidden,

  Uncheck the hidden box, then click apply then OK again, this will remove the hidden of the whole of the file attribute / files.

  Or go to folder options in the Control Panel, or organize in the top left of your library, then folder and search options and the display section and check the folders, files and drives, apply and OK.

• How can I see font in Acrobat DC

  I use on a daily basis in a way that I build websites based on designs in PDF Acrobat files. I don't like this for many years, but with the new version of Acrobat, I can't see fonts more. When I edit mode and select some text, I can see for example this is 12pt Verlag but is it Verlag "BOLD" book or medium or light? I know that I can open the PDF in Illustrator and get information from there, it's something I do now, but in the latest versions of Acrobat I could select text, click with the right button of the mouse and choose 'Properties' and I'm getting all the necessary information. It was longer than now that it appears on the right side panel information but more detailed information. I prefer Acrobat as I can jump quickly between pages as I have them all in a single long PDF and it uses less resources than Illustrator. I guess it may have something to do with fonts not being installed, but this has never been the problem and I do websites were I web fonts. And I know that I can sync typekit fonts, but not all fonts are in typekit. So I wonder do I miss something here, is there a workaround, or was the neglected feature and can be added by Adobe?

  I thinke "HelveticaNeueLT Std Blk" appeared because you have installed however police if you have not it would not appear. Please take a look at the following comparison drawn with exact same file in Acrobat and Illustrator. In Acrobat, you can tell only Verlag is only in Illustrator, you can find his 'book' and it's problem here. I'm not wishing to change the police even to know what it is without having to open each page in Illustrator.

  

• I can't see model excel after upgrade editor bi of 10g and 11g

  Hi all

  We have improved Bi Publisher reports from 10g to 11g. Reports looks good with RTF out put. Reports are displayed with Excel out put.

  If I click EDIt of excel layout, that nothing is displayed. If I can't model properties is available.

  My question is

  RTF works well why EXCEl does not work?

  can I download 10 GB excel and I can download in 11 g?

  should I open excel 10 and 11 g and copy and paste out put?

  is there properties I should correct?

  Please help me. for your understanding I'm downloading a few screenshots. (see attachment)

  Thanks in advance for your time and support.

  I solved this problem.

  I downloaded excel 10g, then downloaded page layout in the report of 11g. It works very well.