Can't see the main residential group. What can I do?

Similar Questions

• help me understand, using Windows 7 to list home group as MSHOME. Now I see a seperaate residential group. Is an Intranet and other Internet, because the Evenrt Viewer says MSHOME is Dmain name

  At first Windows 7 you called MSHOME workgroup in properties. I had to change my name to the computer at the end, and error, that I have done, went to the event viewer to check and the new name is also I see MSHOME listed as my Doman name under login. Is now Homegroup Intranet and the Internet working group. Raison d'etre, asked me and the best thought I could find to answer the question. Think it is safe, but do not want to gibe bad advise. Any advice or references welcome...   Thank you.  Also how can a computer be included as a principal Explorer?

  Sorry for the confusion, "" "like MSHOME workgroup" "" no residential group as MSHOME "' did I ment to print in Question..."

  Hi Nathan,

  Thanks for posting your query in the Microsoft Community Forums.

  Need you same name of working group on different computers to connect over the network to the working group.

  I suggest you try to change the name of workgroup instead of the domain name. See the article for more information on the same:

  Join or create a workgroup

  http://Windows.Microsoft.com/en-in/Windows7/join-or-create-a-workgroup

  You can also read the following article to know the difference between a domain, a workgroup, and a homegroup:

   

  What is the difference between a domain, a workgroup, and a homegroup?

  http://Windows.Microsoft.com/en-in/Windows7/what-is-the-difference-between-a-domain-a-workgroup-and-a-HomeGroup

  Hope this information helps.

  Let us know if you encounter problems under Windows in the future. We will be happy to help you.

• Home network can't see the main PC.

  Original title: home network problems

  I have a TVs small home network 2 a laptop and my main pc

  everything is ok except the network can, t see my main pc

  Hi Mark,

  Thank you for the update.

  1. are you always face the question?

  2. have you tried to check network referring to article settings: networking of computers running different Windows versions?

  3. When you say "to open another account," have you tried to post the question again with a different account?

  4. If the problem persists, then could you please confirm what operating system do you use computers laptops and main PC?

  Let us know if you need help with Windows related issues. We will be happy to help you.

• I can't see the pictures on facebook, what is the problem?

  It's been a few months that I've seen normal photos on my facebook... I can see the litlle one but when I try to open anything is there.

  See the problems that cause to not show images and http://kb.mozillazine.org/Images_or_animations_do_not_load

  It is possible that you clicked on 'Block Images' from the context menu in an attempt to save an image.

  Check the image exceptions: Tools > Options > content: Load Images: Exceptions - see the web content, pop-ups, fonts and language settings

  • A way to see what images are blocked is to click on the favicon (Site ID icon) on the left side of the address bar.
  • Click on the "More information" button opens the Security tab of the "Page Info" window (also accessible via "tools > Page Info").
  • The Media of the "Page Info" window tab.
  • Select the first image and scroll though the list with the arrow pointing downwards.
  • If an image in the list is grayed out and there is a check mark in the box "block Images of..." and remove this mark to unlock the images from this area.

• I've updated to v22.0 and after installation of my policies seemed to have changed, I now have to scroll to the right to see the entire web page, what settings have chgd?

  After the upgrade to 22.0 my web pages no longer seem to adapt, and I need to scroll to the right to display the page. The police seems to have understood more great. Any ideas on what may have changed with my settings? Thank you.

  Hello

  Firefox on Windows is now after display, scaling options that can make the biggest text on screens at high resolution.
  You can adjust the resolution of your screen.
  To change it follow these steps:

  • Type of topic: config in the Firefox address bar and hit the Enter key.
  • If the warning that this might void your warranty , click I'll be careful, I promised.
  • Search for layout.css.devPixelsPerPx

  

  • Double-click layout.css.devPixelsPerPx to edit its value. The default value is - 1.0 in Firefox 22 and above. Change it to 1.0 to run as in previous versions of Firefox.

  If necessary, further adjust the value of 0.1 or 0.05. Values between 1.0 and around 0.5 to reduce the size of the elements. Use a value greater than 1.0 to increase the size. For example, a value of 1.25 will increase the font size of the 125% to account for the default DPI setting in Windows 8. Check the value that you enter. Definition of a value that is too small will take everything away and too high will explode things.

  If the web pages should always be adjusted so you can watch the extension Default FullZoom Level or NoSquint .

  To adjust the font size for the user interface, you can use the extension of theme font & size changer .

  This solve your problems? Please report to us!

  Thank you.

• Unable to see index to display the site replication group

  Hello
  
  I added a few tables and their indexes to a group from the site of master materialized view
  
  I can look in user_repobject to the control of the site and you can see all the tables and indexes
  
  I created and then some views simple fast refresh materialized view site
  
  I do not see the clues that I had added on master site when I am connected to the display of the site
  
  So if I ask materialized views to display the site explain plan does not show that the indexes are available
  
  Is there a process I need to follow to make available on the site to see the main site index?
  
  Any help would be thank you very much
  
  The version of the oracle server is 11.2.0.1
  The customer is 10.2.0.4
  
  Best regards
  
  Patrick

  See http://download.oracle.com/docs/cd/E11882_01/server.112/e10706/reptrouble.htm#i9450
  and
  http://download.Oracle.com/docs/CD/E11882_01/server.112/e10707/rarmanage.htm#i25931

  You should have added the Master_RepObject and call Generate_Replication_Support between the INTERRUPTION / RESUMPTION.
  The actual creation could be pushed through the DBMS_DEFER_SYS.

  You have tasks running in the background? You asked DBA_REPCATALOG to see if the request for creation of the index was pushed and executed?

  (BTW: I did it for the MultiMaster replication.) Not sure if index on MVs are treated in the same way or not really need to be created manually).

  Hemant K Collette

• I don't see the Ripper group in first pro after update 20141, and 2014.2 has not been set.

  

  Please someone help me to solve this problem, I'm literally crazy that I have to change in my address and I am constantly hanging up to different monitors, claiming a different workspace from most of the time. Thanks in advance.

  To be clear, I can't see the Ripper of group and therefore having to reset my workspace everytime I want to anchor a group of panels not anchored.

  You are right. The ability to move a panel group has been removed as part of the redesign of the user interface which started in CC2014.1. I'm bored, too. If you are so inclined, you can submit a request/complaint to the www.adobe.com/go/wish.

• How can I change the name of the main identity in Outlook Express without uninstalling it please?

  I need to change the name on my Outlook Express main identity.

  By default, the name of the main identity is the main identity. What did you change?

  File | Identities | Manage identities. Click Properties and rename it.

• After installation, the main Thunderbird window does not open (send emails)

  Thunderbird has been an automatic upgrade this morning (02/05/14).
  Now, when I open it, it opens and I can even see the preview of the main screen when I hover over the icon in my launch, but the main window does not open.
  If I right click to compose a message, I can, and it does not send. But I didn't see the main screen.
  I closed it, closed the process of thunderbird. I moved my profile and reinstalled Thunderbird.
  Same problem ever time.

  When I try to open the registry, it says it's corrupt. But CCCleaner does not seem to fix. Don't know what to do next.

  Thanks for any help you can provide!

  Can you post a screenshot of your problem?

  http://support.Mozilla.org/en-us/KB/how-do-i-create-screenshot-my-problem

• How to bring back the main Windows Media Center start screen?

  I have Windows Vista Premium and this is why I have Windows Media Center. All of a sudden, I'm not able to see the main start screen. What can I do to get it back? I did nothing to him, but all of a sudden, I can't choose anything. Impossible to use for my flat screen or to the office. Help please...

  Update your graphics card driver. Visit the manufacturer's Web site to download and install the latest compatible driver graphics card.

• A sub-application in the same application domain as the brother of the main loading application

  Hello

  I'm creating a portal application that loads applications into their own application domain different from the main app, basically what I'm trying to do is the following:

  -Portal - main ApplicationDomain

  -SubApp1 - new AppDomain

  -SubApp2 - same AppDomain as SubApp1

  SubApp1 and SubApp2 could then call each and other properties and change their values.

  I tried the following:

  var loaderContext:LoaderContext = new LoaderContext();

  loaderContext.securityDomain = SecurityDomain.currentDomain;

  loaderContext.applicationDomain =

  new ApplicationDomain(); //New scope

  -SubApp1

  swfLoader1SubApp1 =

  new SWFLoader();

  swfLoader1SubApp1.loaderContext = loaderContext;

  Panel1. AddChild (swfLoader1SubApp1);

  -SubApp2

  swfLoader2SubApp2 =

  new SWFLoader();

  swfLoader2SubApp2 .loaderContext = swfLoader1SubApp1.loaderContext;

  Panel2.addChild (swfLoader2SubApp2);

  When I try to change values of each and the other values, only SubApp1 can change the value of the property on SubApp2.  SubApp2 gives me an error like this when you access the SubApp1 property:

  ReferenceError: Error #1069: treeTitle property not found on SubApp2 and there is no default value.

  I'm trying to reference each and other properties as follows:

  SubApp2 call SubApp1 - NOT WORKING - GIVES above ERROR

  public function setLabel():Sub //some function which is called when clicking on a button on SubApp2

  {

  Application.application.treeTitle.text =

  "dummy value" ;   treeTitle is a member of SubApp1

  }

  The other way around works: SubApp1 call SubApp2 - this WORKS FINE

  Manager events for the tree control change event.

  public function treeChanged(event:Event):void {}

  selectedNode = tree (event.target) .selectedItem

  as XML;

  Application.application.titleBar.text = selectedNode.@label;

  }

  What I am doing wrong? Any ideas are greatly appreciated :-)

  Thank you.

  No, I'm part of what you were trying to achieve. systemManager.document will allow each app update its own "treeTitle.text". If you want to change an application objects that live in another application, then I'll try the following technique. Use the application, Application.application, like a message dispatcher to relay messages from SubApp1 to SubApp2 and vice versa. You must create a custom event that indicates what application is addressed first, "SubApp1" or SubApp2"and the value to be set in 'treeTitle.text '. The SubApp1 and the SubApp2 should add listeners for the event custom Application.application. When the event listeners are called, they check if the event is for them. If so, they update their 'treeTitle.text' to the value specified in the event. Otherwise, they do nothing. In each application you would send a message like this:

  Application.application.dispatchEvent (customEvent);

  In Flex4, using FlexGlobals.topLevelApplication instead of Application.application.

  -Darrell

• Photosmart 7525: photosmart 7525 photo tray - how to get the photo tray to use instead of the main tray

  I use a computer from Dell using Windows 8.1 desktop 64-bit.  Printer is HP Photosmart all-in-one 7525.  The software is Microsoft Picture Manager.   I want to print a photo .jpg of MS Picture Manager for paper photo 4 x 6 I have loaded in the photo printer paper tray.  The problem is that printing is still trying to main paper tray in the printer.  Remove all paper from the main tray just causes the print operation to not to say that the main paper tray is in the paper.    If the main tray contains plain paper, the photo printed on this paper.  I have the printer set up to use the photo tray.  I select HP 4 x 6 paper in MS Picture Manager and also set Picture Manager to the highest print quality.  But no mater what I tried, the printer selects tray to main paper rather than the smaller photo paper tray.  The printed image is 4 x 6, but it is printing on paper of the main plate.  What I am doing wrong?

  Well - I found that among the pop ups related print had a link 'options' that seems to indicate that it could be me trying to change things which were not suitable for my printer - so I didn't click the link.  So this time I didn't click the link and he showed me up - again - to set the s/w to use the photo tray.  So I did and the photo made print from the photo rather than the main tray tray.  So now I know how to do and don't need to mess with trinkets or all other signs, you've shown me.  Thank you for taking the time to try to help me.  I appreciate your help.  CR

• Targeting the main timeline of in a MC

  Hello all, I have this project that basically works like a slide show. I'm doing things common sense and avoid scenes so I am building each slide as a separate and then mc placing them on the main timeline. What I'm trying to do is get the playhead to move forward on the main timeline to the next image once the mc reached its last picture. I found code that works, but it looks pretty ghetto:

  var _root:MovieClip = MovieClip (root)

  stage.addEventListener (Event.ENTER_FRAME, Text2);
  function Text2 (myevent:Event): void {}
  _root.gotoAndStop ("slide2");
  }

  I guess I have two questions:

  1. What is the right way to target a frame on the main timeline of in a mc in as3?

  2. the way I do build does make sense, or is there a better solution?

  Thanks for reading!

  This code is an accident waiting to happen.  An ENTER_FRAME event is raised repeatedly, at the rate of the file.  This does not mean that it looks like... such As... When something enters a ' framework' everything you need instead of this code is to put the following line in the last image of the mc...

  MovieClip (root) .gotoAndStop ("slide2");

  Since you asked on 'clean'... children should not talk back to their parents and tell them what to do.  The good news is that they should be independent and care only for doing what they do. It is the parent to keep an eye on the kids if they are so trend.  The only thing they should do is to know when they are made to the world the fact.  This is done by sending an event.

  If what you're doing are implemented the child to dispatch an event to indicate that they are doing what they are doing (in the last image in your case).

  dispatchEvent (new Event ("imDone"));

  and set up a listener for this child object in the parent of the parent timeline to listen to this event...

  childName.addEventListener ("imDone", eventHandler);

  function eventHandler(event:Event):void {}
  gotoAndStop ("slide2");
  }

• Why can I not see my RT Surface in the residential group of my other PC?

  I added my new Surface RT to my homegroup. I can see and access the other PC on my Surface, but I don't see the Surface on my other PC. This is a limitation of RT or did I do something wrong?

  Which is expected.  The surface is a residential consumer, not a waiter in homegroup.  Access to and use files on the homgroup, but cannot act as a server to provide files to others in the homegroup.  Most of this is a limitation due to the nature of low-power connected Surface RT (if it was to be a server, the battery would die in a few hours).

• I can see the other computers in my home group, but I can't open the Document, or any other folder.

  What setting should I do so I can open the files in my homegroup?

  I had this same problem where I could the records in the residential group, but when I timed on a nothing was going to happen. Here is how I fixed it... On each homegroup computer, do this: 1) go to control configuration\reseau and Internet\Network and sharing 2) on the left, click on 'Advanced sharing settings change' 3) scroll down until you see 'HomeGroup connections' section 4) make sure that the "Allow windows to manage the homegroup connections" option is checked. (5) follow the instructions to close the session, then it works... In case you're curious, these parameters were also controlled in the House or at work in "advanced sharing settings" - profile market discovery-lit file and print sharing - public folder sharing (not recommended) - connections sharing media streaming off 128 bit-lit hope sharing password protected, this helps!