Can't see the new table in the PS Group Manager

Sorry guys, I'm kinda new to storage management. I worked in existing bays built by the last person who was here. Now that he is gone, I was charged with the addition of two additional paintings/members to our existing EqualLogics. Problem is that I see the 2 members in Group Manager, but not the 2 new ones. We have a data center managed by 3rd party and they say that they have wired everything in. Both are supposed to be cross-connected series via a connection to one of our servers and the other in an existing table. Now physically I don't know how everything is connected. I console just in Workgroup Manager. I don't see new members there. I tried to connect from one of the servers connected using PuTTY and the connection series. I've used sides of Baud has offered online. But I can't connect what either. Sorry if this sounds very basic - but what don't get me? How to see these devices to even configure the network adapters and RAID?

Thanks for any help guys

Hmm... what exactly do you mean with "the table is connected to the active controller?

Guys in your data center can make the photo of the back of the EQL? See the two CMs with the cables and the LEDS may help.

When putty.exe close the window immediately that there is probably nothing on the other end, but when it remains open, it is normally a good sign. Press 'enter' or ctrl + c. If you see garbage or nothing the connection parameters doesn't match. Once again its 9600/8/1/n.

Note: if ever you restart an active EQL the CM moves which makes it difficult when with only a working serial cable.

You can also try is turning off the device. Verify that your connection to the CM right and turn on again. You will see output of a CM of start-up.

Do not use is not a black font on a black background in putty also makes life easier ;)

Kind regards

Joerg

Tags: Dell Products

Similar Questions

  • Can't see the nuance group button?

    It seems as if my button of the swatch group is missing? This is supposed to be a small folder in the correct swatch tab? I can see it in the tutorial, but not in the mine or the windows tab. Here is a screenshot of my friends and it is not here as you can see. Any suggestions on why this might be or where I can find it?

    What version of ID do you use? I think that you need version 10 (CC 2014) for groups of colors.

  • Why can I not see the Accessories group in Windows 7

    I can't see the Accessories group on my computer laptop girls. It runs Windows 7. I can see the Group on my laptop. Help appreciated

    See the following topics:

    http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_programs/accessories-option-is-missing-from-the-all/ec831a56-495e-4888-b70e-cae64470b553

  • Can't see the new external hard drive connected to my iMac for my MacBook?

    Hi all

    I connected a new 8 TB external Seagate HD to my iMac and I try to see it from my MacBook Air and MacBook to my partner.

    It is properly formatted (journaled MacOS and GUID) and have not had any problems with the 3 TB drive, that we were connected before.

    File sharing on and everything seems normal.

    For the life of me, I can't drive/partitions from the MacBook, although he is able to see the old drive.

    Any help appreciated.

    Thank you

    Hey Dr.Tobyk,

    Not being not able to see a new disk on your network, when you can still see the old drive would make me crazy. I use sharing like this every day and you know how convenient it can be.

    I always look at how a new drive to share implementation is always How to connect with the file sharing on your Mac this article helps me to solve the problems which arise.

    Things I always look how implementation of a new drive, that it is in the list of shared folders and check that user boxes has the correct user with the correct access.

    See you soon

  • I have a laptop Dell Duo and every time I put a new image as my backround it zoomed upward and I can't see the whole picture. How can I fix it?

    I have a laptop Dell Duo and every time I put a new image as my backround it zoomed upward and I can't see the whole picture.

    How can I fix it? Someone please help

    Hello

    What operating system do you use?

    If you are using windows 7, I suggest you to follow the link and set the picture on the screen of the link fill and check.

    Make changes to your desktop wallpaper slideshow

    http://Windows.Microsoft.com/en-us/Windows7/make-changes-to-your-desktop-background-slide-show

  • I can't see the RAW files of my new Sony a6300.  Anyone else having the same problem?

    I can't see the RAW files of my new Sony a6300. (the camera just came out 2 days ago) Also, I have the a6000 and have no problem looking at a RAW of her file.  I have to just wait for an update of Lightroom enable the display of RAW from a Sony a6300?

    Thanks for any help you can give,

    GB

    Hi GB,

    Support for Sony A6300 has been added in Lightroom in today update.

    Suggest you to update to Lightroom: keeping up-to-date for Lightroom

    Kind regards

    Claes

  • When I have videos on my calendar, they do not play in the screen of the monitor. I hear the audio but can't see the image. To test if my new files are somehow the problem, I went back and used video files that I have used successfully a year ago and th

    When I have videos on my calendar, they do not play in the screen of the monitor. I hear the audio but can't see the image. To test if my new files are somehow the problem, I went back and used video files that I have used successfully a year ago, and they no longer play in the monitor window. I hear the sound track, but don't see any video. Have I changed it some setting that controls video playback in the monitor window?

    Randy Ruttger

    Thanks for the follow-up.

    Missing in this equation are the Premiere Elements version you were using and the operating system on which it is running. But...

    The Act is accomplished. But... Up to now, and after that you went ahead and moved to version 12, we now learn what Premiere Elements version you were using. We don't yet know the operating system involved.

    You said first Elements 10. First 10 Elements is affected by a problem serious display known if the computer uses an NVIDIA GeForce video/graphics card card. In this issue, the only cure is to roll back the version of the driver about may 2013. The description of the problem and how to make the rear roller are described in one of the messages at the top of this forum. What video/graphics card your computer use?

    On another front, Adobe will release a new version of Premiere Elements any day now. Not one, but Adobe knows the function defined for the new version. This type of information is announced at the time of the release of the new version.

    So the solution to the problem you presented in this thread could have been...

    1 roll back the version of the NVIDIA GeForce driver for all may 2013 if possible (Windows 8 or 8.1 64 bit, maybe not possible)

    2. move to a different version of Premiere Elements (which you did)

    I offer the foregoing for consideration so that you can review your decisions. We are pleased to learn that the first items 12/12.1 works for you.

    Please do not hesitate to ask questions and seek clarification, but do not forget that the answers are in the details.

    Best wishes

    RTA

  • I can't see the list of my Add-ons (extensions). It shows me a blank page.

    After that I updated firefox 42.0, I can't see the list of my Add-ons (extensions). I see a blank page instead. Modules work, but I can't manage/uninstall any of them.

    It is possible that there is a problem with the files that store the registry extensions.

    Delete the files (extensions.json, extensions.sqlite, extensions.ini) extensions.* and compatibility.ini in the profile folder of Firefox to reset the extensions registry.

    New files will be created if necessary.

    See "extension corrupted files:

    If you see disabled extensions or is not compatible in "Firefox button/Tools menu > Modules > Extensions ' and then click the Tools button at the left end of the search bar to check if there is an update available compatibility.

    If this did not help, then also delete the addons.json file.

    You can use this button to go to the current Firefox profile folder:

  • How can I see the amount of cycles of battery on the Satellite U200-181?

    I have Satellite U200-181, and I use it hard, each. I want to be ready replace my battery, when he has 400 cycles.
    How can I see the amount of cycles of battery on my laptop?

    You shouldn't see this. You will see that the battery capacity goes down and will be empty shortly after. No one says that you will be able to use the 400 battery cycles only. You may be lucky and the battery will be more long service life.

    My Tecra M1 is about 4 years old and still works with the original battery.

    Your question is quite unusual and I am really interested about new comments.

  • How can I see the photos that are not in an album?

    How can I see the photos that aren't in an album in the App "Photos"? I noticed that in the Album 'Pictures' are pictures I thought I deleted already. I would like to see all the photos in an album, so I can finally delete them.

    You can go the the file menu Photos and click New Smart Album, and then set the condition of Album - is not. This will create a smart album that will show you all the photos that are not in any other album.

  • Import photos no problem can not see the photos on iPhone

    I upgraded my MacBook Pro to El Capitan.  Since moving from iPhoto to Photos (even before I updated the operating system) when I plug my iPhone 5 to import pictures in the selected library I do not see the photos appear in the import window so that I can select for imports.  I literally had to email it to myself, and then import it into the e-mail.  I work with different libraries within pictures, so I excluded it only love the library system.  Same result, can not see the photos.  Also, I have unplugged and replugged in and tried the other USB port to rule out hardware, while the Photos could force them to see the device as new, and that does not work either.  I tried something another user who had to open Image Capture to see if she could see all the pictures on my phone and it doesn't work, I found (theory was that opening would make Photos recognize as well).  However the Image Capture wouldn't add a USB scanner so I think it's not worthy of trust.  Photos only setting I have enabled is the automatic update to iCloud.  Otherwise, I don't know what another parameter to seek that could block it.

    When the phone is connected USB the phone reboot - many have found this will clear this problem

    LN

  • I can't see the list of available wireless even when connected to wireless internet connections.

    I can't see the list of available wireless connections. So I can't connect to new wireless connections as I have not logged in before. The icon in the taskbar that would show you the possible connections disappeared. Nothing shows under connections network under Favorites network even when I'm logged in. I can pick up internet connections from earlier I can't see that one that is connected to or control it. Help, please. Thank you.

    Hi CorneliusE,

    1. what service pack is installed on the computer?

    2. what exactly happens when you try to view wireless networks? You receive error message nay?

    3. do you have security software installed on the computer?

    4 did you do changes on the computer before the show?

    Follow the suggestions below for a possible solution:

    Method 1: You can follow the steps in the article and check if that helps you find the wireless network.

    Windows wireless and wired network connection problems

    http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

    How to troubleshoot wireless network connections in Windows XP Service Pack 2

    http://support.Microsoft.com/kb/870702

    Note: Article applies to Windows XP SP 2, however, can also be tried with other versions of Windows XP as well.

    Method 2: If the method above is not enough, you can consult the following articles and check.

    How to configure TCP/IP to use DNS in Windows XP

    http://support.Microsoft.com/kb/305553

     

    To test TCP/IP connections by using the ping and the commands net view

    http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/sag_tcpip_pro_pingconnect.mspx?mfr=true

     

    Let us know if that helps.

  • where can I see the photos 'print screen '?

    where can I see the photos 'print screen '?

    They are in the Clipboard. If you paste into a paint program (type mspaint into Start - Run all programs - accessories -) or a text editor (Start - All Programs - Accessories - Wordpad). Also see the tool captures to capture the screen (Start - All Programs - Accessories - Snipping Tool).
     
    Copy the screen [Prev |] Next | Content]

    PRT Scn Copies the entire screen to the Clipboard as a graphic or the screen with the mouse if you are using multiple monitors. Use MS Paint to paste the picture. It is also known under the nameof Office Snap.

    According to the key parameters of Prt Scn tab Misc properties of a Dos program, a program back can still print on printer Prt Scn keyed.
    ALT + Prt Scn Copies the active window to the Clipboard in the form of a graph. This is also known as theWindows Snap.
    CTRL + Prt Scn Copies the entire virtual screen when you are using multiple monitors in the Clipboard in the form of a graph. Unlike the other two screens to Print that precedes this one doesn't seem to have a name, or if so, it is not listed in the header of the window files.
    CTRL + Alt + key number minus button Copies the active window to the Clipboard of remote desktop in the form of a graph (same as thePrt Scn locally)
    CTRL + Alt + number Pad Plus key Copies the entire screen to the Clipboard in office to distance in the form of a graph (same asAlt + Prt Scn locally)

    Such programs that Outlook Express do not allow paste not web graphs. Paste into MS Paint andrecord under a web graphics. If the screenshot by email sending save it as a jpeg, gif or png file before sending (in MS Paint,file - save as, and then choose a format in Save As Type). The color isn't usually important for the screenshots is a way to make a really small file save as a GIF (this reduced to 256 colors), and then save the Gif to Png (lossless and better than Gif compression) or Jpeg (lossy).

    To take screenshots of the menus in the current use of the window the Alt key and hold it down during the entire procedure. ALT + a touch of letter to access the menus, then the keysdirection to move the selection, then Print Screen. Release Alt.
    --
    .
    --

    "Chrystalstrick" wrote in message News: a6a8f42c-03e9-429 d-91e8-6bca342fa0c6...

    > where can I see the photos 'print screen '?

  • Can't see the dashboard LifeCam HD - 5000

    Be great if someone can help to understand why I can't see the dashboard for my new lifecam HD 5000. video stream live appears on my screen, but there is no control that I could find then can capture video for usuage later.

    Thanks - hugh

    http://www.Microsoft.com/hardware/digitalcommunication/ProductDetails.aspx?pid=019

    Find out if the learn more section helps you to y.

    http://www.google.com.au/search?hl=en&q=How+to+use+HD+LifeCam+5000.&aq=f&aqi=&AQL=&OQ=&gs_rfai=

    And there are 2 Youtube videos listed at Google on how to use it.

    See you soon.

    Mick Murphy - Microsoft partner

  • Microsoft Visual C ++ Runtime Error - can not see the path of the file.

    When I get the runtime at startup error, I don't see the destination of the file. It is very annoying that I can not see the program that gives me the problem.

    All it says, this is:

    Runtime error!

    Program: C:\Program F...

    How can I extend the above so I can see the path of the actual file?

    Also going to go for a 2 for 1 here...

    Immediately after the closure of the runtime error box, I get the message that search settings stopped working.  I close who and everything is fine until I reboot (by making the error happen) but I'd rather not have the problem in the first place.  I run Windows 7 Ultimate.

    Error information:

    Signature of the problem:
    Problem event name: APPCRASH
    Application name: SearchSettings.exe
    Application version: 4.5.0.2
    Application timestamp: 4e04ab86
    Fault Module name: MSVCR90.dll
    Fault Module Version: 9.0.30729.4940
    Timestamp of Module error: 4ca2ef57
    Exception code: 40000015
    Exception offset: 0005beae
    OS version: 6.1.7601.2.1.0.256.1
    Locale ID: 1033
    Information additional 1:9956
    More information 2: 995611374799875ff43c42d4b1b84d70
    3 more information: 3d4b
    Additional information 4: 3d4b4db0455ea2295d172b959897673c

    Maybe just download a new MSVCR90.dll but I would like to hear what you have to say.

    Hello

    ·         Did you the latest changes on the computer?

    We must first identify to identify the program that is causing startup problems.

    Step 1:

    Check if the problem persists in safe mode.

    Start your computer in safe mode

    http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

    Restart the computer to return to normal mode.

    If the problem does not persist in safe mode, then it is possible that some third-party programs installed on the computer is causing the problem.

    Step 2:

     

     

    I suggest that you put the computer in a clean boot state and check.

    To help resolve the error and other messages, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

    See section to learn more about how to clean boot.

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

    http://support.Microsoft.com/kb/929135

    Reset the computer to start as usual

    When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

    (a) click Start, type msconfig in the search box and press ENTER.

    (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

    (c) under the general tab, click the Normal startup option, and then click OK.

    (d) when you are prompted to restart the computer, click on restart.

  • My DCIM folder was deleted by mistake now I can't see the picture of my camera which is a Nikon Cool Pix L3 on the computer

    My DCIM folder was deleted by mistake now I can't see the picture of my camera which is a Nikon Cool Pix L3 on the computer

    My DCIM folder was deleted by mistake now I can't see the picture of my camera which is a Nikon Cool Pix L3 on the computer

    ====================================
    The following freeware may be able to recover the
    pictures that have been deleted from your memory card...

    (FWIW... it's always a good idea to create a system)
    Restore point before installing software or updates)

    Recuva downloads (versions)
    http://www.Piriform.com/Recuva/builds
    (Download the Slim version)

    If you have been recover files deleted from your hard drive
    Player... the best bet would be on a Portable version
    memory card or a Flash drive. (reduced risk of)
    overwrite deleted files)

    Introduction of Recuva (tutorials)
    http://www.Piriform.com/docs/Recuva/introducing-Recuva

    Recuva - indicating what to look for
    http://www.Piriform.com/docs/Recuva/using-Recuva/advanced-mode/specifying-what-to-search-for

    Taking pictures more should create a new folder DCIM
    on your memory card.

Maybe you are looking for