Can't see the other person, but they can see me. All of the solutions posted did not help.

Similar Questions

• I can see the other person, but they cannot see me

  I have windows 7 on laptop and am using skype7.25

  I see the person, but they cannot see me

  Its only recently its been the case, can you help me?

  Garry

  Thank you, when I'm skyping it says don't send not video, I will use the link now

• Unable to send messages after the accident, the solutions proposed did not.

  Tuesday (April 7), there was an update to 31.6. Thursday, there was an accident. Since that time cannot send messages. The proposed solutions did not work.

  I get the message that the SMTP server does not support the selected authentication.
  I tried the solution mentioned. But nothing helped. I configured the server out on the different types and remove the password as shown. After that, I did the configuration with different types of Setup again. No solution.
  There is not a possibility of webmail. So I'm stuck now.

  There is no problem with incoming messages, they come. This password should be deleted also?

  Any help would be greatly appreciated.

  Greetings,
  AZ58.

  Good. You can then mark the thread as "Solved" Please?
  Thank you.

• Recently FireFox often caused 100% CPU usage and locks until it finishes the process (the different). Clear the cookies/cache did not help. Any ideas?

  Windows 2000 SP4, 1 g RAM, Firefox version 9.0.1
  We keep IE6 and Firefox open simultaneously to 2 different email accounts. Firefox has always been much faster even with 3 or 4 tabs open, but for the past few weeks trying to update a screen suddenly CPU goes to 100% usage and of course nothing will move until the process is complete. Close one or more tabs does not help. If I close Firefox completely using the task processor Manager goes back down to zero. After restarting Firefox CPU use may or may not go back to the top as he tries to continue the previous task which has been lock him up.
  He did this with Firefox 3.6, but still it did not happen immediately after the 9.0.1 update either.

  Hi vbolton,

  Have you looked at the Knowledge Base article Firefox using too much memory (RAM) - how to fix the or Firefox using too many resources CPU - how to fix? There is a lot of information in there.

  Hope this helps!

• I tried to disable "remember passwords for sites" option, but when I exit Firefox and returned, the option is enabled. The solutions page do not help.

  It is a general problem I have with the saving options. It only started a few days ago.

  I lived it in 37.0.2 and 38.0.5.

  Help page https://support.mozilla.org/en-US/kb/how-to-fix-preferences-wont-save

  contains several solutions. I tried them all and they do not work.
  Please notify.

  The two suggested solutions were things that I had already tried without success.

  Finally, what works after much trial and error:
  1 back up all my favorites.
  2 uninstall Firefox.
  3 reinstall Firefox but important! not begin immediately after installation!
  4. run firefox.exe Pei from the command window.
  5. in the Profile Manager, delete all the existing profiles and create a new.
  6. start Firefox, import bookmarks and set the options.

  The options will now be saved!

• On Skype, I could see the other greats of the person, but they said they couldn't see me. WHY?

  On Skype, I could see the other greats of the person, but they said they couldn't see me.  WHY?

  I have the facial recognition camera, but nothing happened.  I have to add something to my computer?

  I have the Dell Webcam, but I thought that it would come automatically while on Skype.

  Hi Amby,

  Check the link below and check if it helps.

  http://Forum.Skype.com/index.php?showtopic=131331
   
   
  If the problem persists, try to contact Skype and check if this may help.

  https://support.Skype.com/

  I hope this helps.

• When I try to make a video call via Skype. I can see and hear the people on the other end, but they cannot hear me.

  I just got a new laptop with the latest softwear Microsoft and McAfee. Everything works fine EXCEPT when I try to make a video call via Skype. I can see and hear the people on the other end, but they cannot hear me.  The microphone settings seem to be OK.  the antivirus that was installed would cause the problem?  I tried to ask Skype. but do not seem to be able to communicate with them...

  The following support Skype may have something that will help: http://support.skype.com/en-us/category/CALL_QUALITY/

• When in Skype, I can hear the other party but they cannot hear me?

  We both mutually see which is very good and they come loud and clear... but they don't heard me not at all.

  Hi Gayle,

  Thanks for posting your question in the microsoft community.

  I understand that if you can hear the other party but they cannot hear you.

  The question is limited to Skype?

  I suggest that you contact the Skype support, that they would be better suited to help this issue. Check out the link and ask the question.

  https://support.Skype.com/

• Web cam problem, using Skype... I can see other people, but they cannot see me...

  original title: web cam problem

  using Skype... I can see other people, but they cannot see me...

  Hello

  Be sure to contact the Skype Support like this might be a known issue and they might have the solution.
  There is also information and on the Skype Forums.

  Skype - Support
  https://support.Skype.com/en-us/

  Skype - Forums
  http://Forum.Skype.com/

  Also check with the manufacturer of the system, their drivers and documentation support online and ask
  their forums (if any).

  ============

  You will probably need to reload the drivers of the device and any camera control software.

  Login as an administrator.

  Double-click Control Panel / Device Manager - Imaging - writing down of the brand and model of camera.
  on this subject and on the tab of the driver is version. Now, click on update drivers (who are unable to do anything as MS
  is far behind the pilots of certification). RIGHT click on the camera - UNINSTALL - REBOOT - it
  will update the driver stack.

  Now, go to the system manufacturer's website and download the latest driver for the camera and the other related camera
  software (if not more recent get the same).

  Download - SAVE - go to them and RIGHT CLICK - RUN AS ADMIN - reboot after each driver.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  Then let windows updates on however prevent loading of drivers who are often older than the
  those that you have installed. If updates suggests a pilot and then HIDE it and watch manually to see if their
  really is a more recent version (at the time system manufacturer and the sites of the manufacturer of the device).

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• iPod Classic stopped display work.  Work displayed in iTunes.  Updated iTunes to 12.4 but did not help.  I can see how to check

  iPod Classic stopped display work.  Work displayed in iTunes.  Updated iTunes to 12.4 but did not help.  I can see how to check and uncheck "Display work" in iTunes but not how on the iPod as others have suggested.  Need to perhaps restore and recharge.

  Long ago with including works on devices was optional, and you can sometimes fix cache work on a device by not including and then add it again. This choice has long since disappeared. A complete restoration and reloading is now the only method to recreate the cache.

  TT2

• I can't Live Update my Max Total Security that I get the message "DB update failed download!» Max Support also did not help at all. Disappointing. What should do?

  I can't Live Update my Max Total Security that I get the message "DB update failed download!» Max Support also did not help at all. Disappointing. What should do?

  Do yourself a favor and remove the application.  Mac do not need AV applications and at best, they will be not hard (but not good either) and at worst will corrupt your system / OSX's built in protection.  Your concerns are malicious software that requires the cooperation of the user to install, not the virus.

  For more information, please read this:

  http://www.thesafemac.com/

  Ciao.

• Please help, I've updated my iPad has a few days, but by exploring my camera I discovered that the front camera did not work while the main or back camera is not working properly, please, anyone with a secure solution please share.  Thank you

  I have tried everything that I could even, to the extent where I hard reset my device, but that it does not work, no possible solution please share with me, that I will accept it gladly. Thanks in advance.

  Already restore you factory? If this is not the case, try this. If you have, or it did not help the cause can be hardware partner. Take it to your local Genius Bar or Apple authorized service provider. -AJ

• My mouse no longer works 2 days ago... I restored my pc on the eve, it works... but that did not help my mouse. This mouse works on another pc... I am getting error usb? I removed & charged all under the usb tab__

  My mouse no longer works 2 days ago... I restored my pc on the eve, it works... but that did not help my mouse.   This mouse works on another pc... I am getting error usb?  I removed & charged all the usb tab

  Hello

  You may need assistance from a real store tech computer (no leeks and glances at a BestBuy or)
  other BigBox stores) or the manufacturer of your system Support.

  What is the error of USB?

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe)
  program generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------

  Please make these now even though you might have tried this before:

  Remove the mouse if indicated in the Manager of devices - devices of score - click right on - UNINSTALL.

  Then lets refresh the USB stack

  Control Panel right CLICK on EVERYTHING - Serial USB controllers - device configuration-manager and
  UNINSTALL all but the category itself - REBOOT - it refreshes the drive and battery USB

  This KB shows XP how to and the method of Vista is identical
  http://support.Microsoft.com/kb/310575

  ----------------------------------------------

  If necessary try these two:

  Tips for solving problems of USB devices - and a Mr Fixit
  http://windowshelp.Microsoft.com/Windows/en-us/help/c39bd203-f729-47a4-8351-83291e13c8a81033.mspx#EGB

  Hardware devices not detected or not working - Mr. Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• sound not working - can't lift, I tried to fix it with Mgr. device but it did not help.

  I have trouble with Device Manager, but it did not help. I'm afraid to win 10 because of new problems, I do not want to download.

  Hello

  See if that helps you.

  Do a system restore to a date before you had this problem:

  "How to make a restore of the system in Windows 8 and 8.1" . "

  http://www.eightforums.com/tutorials/4692-System-Restore-how-do-Windows-8-a.html

  __________________________________________

  Or go to the website of your computer/laptop or the manufacturer of the sound card > looking for drivers and downloads Section > equip your laptop model number > find your operating system > download and install the drivers etc you will find Audio.

  Also read this information from Microsoft and follow the steps there.

  'No sound in Windows.

  http://Windows.Microsoft.com/en-us/Windows/no-sound-help#no-sound=Windows-8&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  See you soon.

• I worked with a license for more than a year and a half. It should expire in October 2016 but my cc told me all of a sudden I do not have a license and my trial is over. How can I fix it

  I worked with a license for more than a year and a half. It should expire in October 2016 but my cc told me all of a sudden I do not have a license and my trial is over. How can I fix it

  Hello

  Your Forum ID associated email address shows no subscription associated with it. Make sure you use the right email address to connect to cc.

  You can also have a look at the following links for that matter.

  Stop Creative Cloud 2015 to return to the mode of trial

  The activation and deactivation of Adobe problems

  Adobe Creative products Cloud launch mode test on non-English operating systems