Can't see the partition D on Vista

Recently, I got my laptop using DVD discs because there was something wrong with my internet connection. In any case, before I got it, I always remember seeing this D drive of about 7.8 GB next to my 140 GB C drive in 'my computer '.

I didn't know that the D drive is for me to use as storage incase of recovery so I didn't click in it before. After recovery I can no longer see the D drive on 'my computer' more. How can I see / access it if I need to use it as storage incase another cover is necessary? I did something wrong with the recovery?

Thank you.

The second partition D is required for some backups that are used by Vista.
The D partition is hidden, and it must be hidden because the data on that partition D should be changed not and do not apply the data files 3rd in this partition.

Simply don t make it visible and don t change anything it s not necessary and not recommended.

Take advantage of this notebook ;)

Tags: Toshiba

Similar Questions

  • How can I make use of TC partitions and make sure that the file analysis is on the right partition?  I do not see the partitions that I have done in the Finder, but I can drag and drop the files in the folder 'Data' unique under Finder/Shared/TC.

    MacBook Air, OSX 10.10.3, 128 GB; 2 TB Time Capsule ME177LL/A.

    Final objective: use Time Capsule as a Time Machine for my MacBook Air and as a storage solution for large files that I don't want permanently on my MacBook Air.

    So far, I've implemented the TC and set up Time Machine on the TC.  I was able to create 2 partitions on the TC using disk utility then that TM was a backup and the disk was recognizable in disk utility.

    Under Finder/shared, I see the TimeCapsule 'airport', and when I click on it it is a file called "Data".  I was expecting to see my two partitions here.  Under 'Features' is a ' Zissou31 MacBook Air (3)"sparsebundle file and I can also create folders here and drag and drop files on the TC here.  I can see the partitions in disk utility, but how do I see/use the partitions I created in the Finder?

    I fear that this may not be set up correctly and I'm either losing on an entire partition I created or these files dragged/dropped may be at risk of overwriting of TimeMachine.  How can I make sure that the file analysis is on the appropriate partition?

    I disabled TimeMachine and go back to see if I could 'point' to one of the partitions, but the "Data" folder is the only thing that TimeMachine seen.  How do I point time Machine for one of the partitions?

    Thank you!

    In addition, in disk utility, I can see one of the partitions TC is related to the time Machine, indicated by the icon Time Machine green bottom left, but two partitions seem to fall under "Zissou31 of the MacBook Air (3) .sparsebundle.

  • in my home network xp laptop in 'My network places' can't see the two other vista computers portable altought they can see computer laptop xp

    in my computer laptop network xp home in my network places can not see the two other vista computers portable altought they can see xp laptop computer and access this computer laptop xp shared docs, laptops 2 vista can see eachother so working group name is on all computers the same portable 3, all are connected etc. What can I do to see the portable 2 on my computer vista laptop xp

    Hi wiking17,
     
    Follow the suggestion given in the article below to resolve this issue:
     
     
    Additional reference on:
     
  • Can't see the new external hard drive connected to my iMac for my MacBook?

    Hi all

    I connected a new 8 TB external Seagate HD to my iMac and I try to see it from my MacBook Air and MacBook to my partner.

    It is properly formatted (journaled MacOS and GUID) and have not had any problems with the 3 TB drive, that we were connected before.

    File sharing on and everything seems normal.

    For the life of me, I can't drive/partitions from the MacBook, although he is able to see the old drive.

    Any help appreciated.

    Thank you

    Hey Dr.Tobyk,

    Not being not able to see a new disk on your network, when you can still see the old drive would make me crazy. I use sharing like this every day and you know how convenient it can be.

    I always look at how a new drive to share implementation is always How to connect with the file sharing on your Mac this article helps me to solve the problems which arise.

    Things I always look how implementation of a new drive, that it is in the list of shared folders and check that user boxes has the correct user with the correct access.

    See you soon

  • Satellite A200-12 x PSAECE: can't see the STRANGE in my computer

    Hi all

    After using my toshiba recovery cd, I lose the CD/DVD-ROM drive, what's wrong?
    The laptop works fine, except that on this issue, I can't see the drive on my computer and equipment, and if I press the eject button I have no answer to the reader, even the amber does ' t see the light.

    I have Toshiba A200-12 x PSAEC (PSAECE) with Windows Vista 32 bit.

    Hope someone can help me please!

    Thank you

    Hello

    I think that Akuma means remove the STRANGE of the Bay of notebooks, then plug it in again.

    In any case, in my opinion you should first check if the reader of CD/DVD (ODD) was recognized in the BIOS, and maybe you can also try to boot from the CD/DVD drive to check the functionality.

    If it will work, the connection is ok.

    In this case, I would recommend removal of the upper and lower registry filters.

    Check the MS doc for more details:
    http://support.Microsoft.com/kb/270008/en-us

    Good luck

  • where can I find the download for windows vista Spider Solitaire

    where can I find the download for windows vista Spider Solitaire

    Hello

    Thanks for posting in the Microsoft Community Forum, please be assured that we would do our best to help you.

    Windows like Spider solitaire games comes with Windows Vista. To install the Spider solitaire, you need a Windows Vista disc. To install lonely Spider see the following steps.

    a. to install solitaire spider, click on the Start button

    b. click Control Panel, click programs and then click turn on turn Windows features on or off.

    c. in the Windows features dialog box, select the Games check box, and then click OK. Note: If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

    Read the following article which provides more clarity on the games in Windows Vista.

    Learn more about the games in Windows Vista
    http://Windows.Microsoft.com/en-us/Windows-Vista/learn-about-Windows-games

    If you have any questions do not hesitate to answer, we would be happy to help.

  • How can I see the cluster move in Disk Defragmenter, when I run the program

    How can I see the clusters move in Disk Defragmenter when I run on my old computer I could see and my step dad had told me that anyone who has a computer can display when they run this program

    Due to popular demand, is no longer a part of Disk Defrag in Vista.

    Disk Defrag in Visa works quietly in the background.

    People complained the old Disk Defrag in XP style interface, as they had to do on her computer, not to watch the little squares moving.

    You can use 3rd party defragmentation products:

    http://www.SnapFiles.com/reviews/Auslogics-Disk-Defrag/adiskdefrag.html

    http://www.SnapFiles.com/reviews/IObit-SmartDefrag/iobitsmartdefrag.html

    http://www.SnapFiles.com/reviews/Diskeeper_Home/Diskeeper.html

    See you soon.

    Mick Murphy - Microsoft partner

  • I can't download the new updates to vista. I tried several times without success. musi whay do to remedy this problem?

    I can't download the new updates for vista.  have tried many, many times!  What must I do to solve this problem?

    You post your question in the wrong Forum.

    Windows Update Forum:

    It comes with Vista, upgrade install and activate Forum.

    You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

    http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

    When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

    In this way, you will receive the best help.

    See you soon.

    Mick Murphy - Microsoft partner

  • Wireless dead after reinstalling Windows. Device Manager can't see the map

    Hello

    I have a laptop model Lenovo 3000 N200 14W 0687.  It was teeming with virus so I wiped the hard drive and installed Windows XP Home Edition from scratch.  Now Device Manager can't see the wireless adapter and Wireless does not work.  I tried to download and install the Wireless driver on the Lenovo site (I don't have a disc of relocation); but I got errors.  Anyone know what could cause this and a fix?

    If you are interested, here are the details of what happened when I tried to download and install the drivers:

    Device Manager gives me the adapters three following network:
    Network adapter 1394
    Broadcom NetLink (TM) Fast Ethernet
    MAC bridge Miniport

    None of which resemble wireless cards. So I used the link http://consumersupport.lenovo.com/ot/en/DriversDownLoads/Drivers.htmlto try out. Enter my serial number L3X3516 took me to a support page client lenovo that says

    Total 13 drivers need to be repaired/upgraded, 9 drivers in need of repair, please click the "Download" button to begin to repair

    One of them was this:

    Intel (r) PRO/Wireless 3945ABG Network Connection

    I downloaded it and it says: 'the contents of this file cannot be unpacked. the executable file that you are trying to run has been damaged. You can get another copy of the file, verify its integrity, and then try again"

    So I used google to find this site:

    http://www.getpcmemory.com/drivers/download-Lenovo-3000-N200-type-0769-notebook-Windows-XP-Vista-DRI...

    who told me that my computer is a Lenovo 3000 n200 Type 0687.

    Using google once again, I found this page:

    http://www-307.IBM.com/PC/support/site.WSS/document.do?lndocid=MIGR-68011

    which was another version of the driver. So I downloaded and unpacked it. I then took a glance at the .txt guide provided with the driver. It is said:

    1. Start Windows XP and log on with administrative privileges.
    
    2. Double-click the driver package to extract it to your hard drive.
    
       The default location is C:\SWTOOLS\DRIVERS\WLLANINT
    
    3. Click Start, then click Run...
    
    4. Specify SETUP.EXE with the full path name where you extracted the
    
       package in step 2, and click OK.
    
       Example: C:\SWTOOLS\DRIVERS\WLLANINT\SETUP.EXE
    
    5. Follow the instructions on the screen to complete the installation.
    
    Unfortunately, there is no setup.exe file in the folder so this has failed.
    
    Regards,
    
    satherb
    

    configuration > wireless lan support > enabled

    for display drivers, re - install it: http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-67978

    and on Device Manager, please, provide the device id. (eg PCI VEN_8086 & dev_2929 & subsys)

    or if you know which wireless adapter you have, download drivers from the download page, then re - install.

  • Can I copy the computer my brother Vista System32 folder and navigate through it on my Windows 7 computer?

    Can I copy the computer my brother Vista System32 folder and navigate through it on my Windows 7 computer? I like to compare the old and the new and see what works, but I'm not sure it's legal, and I assure you.

    Hi Aaron Campbell,

    To help focus in the right direction, I would like to know what exactly are you trying to accomplish?

    You try to compare windows vista and windows 7?

    Yes, you can copy the folder system32 on a flash drive and then compare it with windows 7.

    The System32 folder and its subfolders contain files of system operating base for your installation of windows operating system. See the link below for more information:

    http://TechNet.Microsoft.com/en-us/library/bb457124.aspx

    Note:

    ؠ You cannot copy all the contents of the system32 on the flash player folder because the essential components are in use.

    ؠ Do not replace or try to copy the system32 (from windows vista) folder for drive C on windows 7, the computer may become unstable.

    You might want to know

    Compare windows 7 with windows XP and windows vista.

    http://www.Microsoft.com/Windows/Windows-7/compare/versions.aspx#

    Thank you, and in what concerns:

    Ajay K

    Microsoft Answers Support Engineer

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Microsoft Visual C ++ Runtime Error - can not see the path of the file.

    When I get the runtime at startup error, I don't see the destination of the file. It is very annoying that I can not see the program that gives me the problem.

    All it says, this is:

    Runtime error!

    Program: C:\Program F...

    How can I extend the above so I can see the path of the actual file?

    Also going to go for a 2 for 1 here...

    Immediately after the closure of the runtime error box, I get the message that search settings stopped working.  I close who and everything is fine until I reboot (by making the error happen) but I'd rather not have the problem in the first place.  I run Windows 7 Ultimate.

    Error information:

    Signature of the problem:
    Problem event name: APPCRASH
    Application name: SearchSettings.exe
    Application version: 4.5.0.2
    Application timestamp: 4e04ab86
    Fault Module name: MSVCR90.dll
    Fault Module Version: 9.0.30729.4940
    Timestamp of Module error: 4ca2ef57
    Exception code: 40000015
    Exception offset: 0005beae
    OS version: 6.1.7601.2.1.0.256.1
    Locale ID: 1033
    Information additional 1:9956
    More information 2: 995611374799875ff43c42d4b1b84d70
    3 more information: 3d4b
    Additional information 4: 3d4b4db0455ea2295d172b959897673c

    Maybe just download a new MSVCR90.dll but I would like to hear what you have to say.

    Hello

    ·         Did you the latest changes on the computer?

    We must first identify to identify the program that is causing startup problems.

    Step 1:

    Check if the problem persists in safe mode.

    Start your computer in safe mode

    http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

    Restart the computer to return to normal mode.

    If the problem does not persist in safe mode, then it is possible that some third-party programs installed on the computer is causing the problem.

    Step 2:

     

     

    I suggest that you put the computer in a clean boot state and check.

    To help resolve the error and other messages, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

    See section to learn more about how to clean boot.

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

    http://support.Microsoft.com/kb/929135

    Reset the computer to start as usual

    When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

    (a) click Start, type msconfig in the search box and press ENTER.

    (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

    (c) under the general tab, click the Normal startup option, and then click OK.

    (d) when you are prompted to restart the computer, click on restart.

  • Can't see the video on Windows 8

    I recorded several programs on Windows Vista Home premium.  I recently bought a computer with Windows 8.   I can hear audio from programs I registered but can not see the video.  What are the options are open to me?   Do I need to buy the upgrade to Windows 8?

    The registered item is probably just out of date.  I don't think that there are a lot of options.  If there are alternatives, I don't have to aware of them.

  • I am trying to print PDFS from Safari, but can not see the page numbers

    I just opened a document PDF 700 + pages in Safari and need to print the odd pages and there, but I can't see the page numbers displayed when I scroll the document. When I view the same document on an iPad, the page numbers change when I scroll but on my iMac (with the help of Safari 10) they appear not at all - and 700 + pages is a lot to go wrong! The clues how I can spend on 'display the page number?

    The default Apple PDF Internet plug-in used by Safari does not display the page numbers (except if they are in the footer of the PDF document in question), and there is no setting in Safari preferences to turn on this feature. Your best bet is to download the PDF file, then open it in preview or Acrobat Reader, where the thumbnails will be the correlation to page numbers. Then you can select several arbitrary thumbnails using the control button to print those selected pages. In the Pages section of the print Panel, you select "Selected Pages in the sidebar".

    The PDF Internet plug-in installed by Adobe Acrobat Reader or Pro displays the page current and total page in its turnaround Panel. If there are page numbers in the footer of the PDF file accessed, they are not deleted. You must enable Internet Adobe plug-in to Safari preferences: Security Panel.

  • How can I see the list of authorized computers (not how)?

    Hello

    I would need to see the list of computers that are allowed before removing all permissions.

    How can I see the list of the authorized computers (not how I have)?

    Thank you

    There is not one available from your end.

    (144073)

  • can't see the devices in my macbook pro

    I can't see the devices in my macbook pro

    If you mean they are not recognized in iTunes...

    If iTunes does not recognize your iPhone, iPad or iPod - Apple Support

Maybe you are looking for