Can the ESXI 5.0 and Vmware View coexist on the same server blade

Similar Questions

• Level of encryption between Wyse ThinOS and VMware View desktop

  Can someone help me determine the level of encryption between my Wyse thin clients and virtual desktops.

  I use the latest Wyse ThinOS and VMware View connection Server 4.0.

  I have a manual desktop pool configured with things THAT RDP disabled. I'm also using smart card authentication.

  With direct disabled RDP is a configuration of SSL tunnel for the connection to the server and the RDP session to the virtual desktop by tunnel through this SSL connection?

  Yes that's right, although strictly that you should say server/connection security as if you use a security server, then this is endpoint of the tunnel rather than the CS.

• install esxi 4.1 and the data store on the same server

  Hello

  I want to install esxi 4.1 and the data store on the same server.

  My problem is that I can't make partitions to really separate them and I would reinstall esxi without wiping the data store.

  Y at - it another way to put a record out of the raid only to install esxi.

  I also do not install on a USB key.

  Thank you

  AZEL says:

  Hello

  I want to install esxi 4.1 and the data store on the same server.

  My problem is that I can't make partitions to really separate them and I would reinstall esxi without wiping the data store.

  Y at - it another way to put a record out of the raid only to install esxi.

  I also do not install on a USB key.

  Thank you

  AZEL,

  Can you give us more details about your current environment?  What is the size and the data store space used? Do you have any storage of additional network attached to the host (for backup purposes)?

  My assumptions of your post do you have 1 stand-alone host with ESXi 4.1 aready installed and you also have a local data store on the same host, but you want to re - install ESXi 4.1 while keeping the contents fo the data store.  Is this correct?

• ASIC can run on the same server/db like EBS (R12.1)

  Hello

  We have an EBS (R12.1) environment and intend to use the CPSA. I've seen environments where the CAWC runs in its own environment/database, etc. and connects to an instance of the EBS. Which is the only type of available configuration or can CAWC run fully within an environment of EBS/instance on the same server? If so, what are the consequences of such a configuration, for example on the performance.

  Thank you

  NAT.

  Hi Nat,

  ASIC can be configured in two ways:

  1 centralized - where the EBS and VCP reside on the same application server.

  2 decentralized - where the EBS and CRS are on two different application servers.

  Basically the motor nucleus of CPSA of planning does all the planning in the memory of the application server (and not in the database). This planning process is highly require a lot of resources (memory) and requires a huge memory (according to the data, the type of plan and many other factors). If the application servers are not the right size, this led to the poor performance of the application. And if both the planning and EBS reside on the same server, there are possibilities that you slow the global treatment through the functions of the company. That's why decentralized architecture is preferred, where the planning process running on another remote computer of your EBS and it didn't there in not affecting transactional modules.

  Beyond that, you have the ease of maintenance in terms of correction, update, addition of multiple of VCP modules, if you're on a decentralised architecture.

  Centralized architecture is also not rare. Many companies run their planning and EBS on a single machine.

  I hope that the above gives you a point of view, using which you can choose what suits your business best!

  Kind regards

  Mohan Balaji

• VMware View 5.1.1 Security Server LDAP errors

  Im having a serious amount of errors on my VMware View (5.1.1) security server

  Log debugging shows a large amount of LDAP errors, see below.

  2012-09 - 06T 10: 46:49.075 + 02:00 ERROR (0610-0940) < WSAdminDomainTimerThread > [ws_admin] cannot bind to LDAP://rootDSE
  2012-09 - 06T 11: 01:50.102 + 02:00 ERROR (0610-0CB8) < WSAdminDomainTimerThread > [ws_admin] cannot bind to LDAP://rootDSE
  2012-09 - 06T 11: 16:50.109 + 02:00 ERROR (0610-0FE8) < WSAdminDomainTimerThread > [ws_admin] cannot bind to LDAP://rootDSE
  2012-09 - 06T 11: 31:51.120 + 02:00 ERROR (0610-0DD8) < WSAdminDomainTimerThread > [ws_admin] cannot bind to LDAP://rootDSE
  2012-09 - 06T 11: 46:51.132 + 02:00 ERROR (0610-0244) < WSAdminDomainTimerThread > [ws_admin] cannot bind to LDAP://rootDSE
  2012-09 - 06T 12: 01:52.159 + 02:00 ERROR (0610-0F3C) < WSAdminDomainTimerThread > [ws_admin] cannot bind to LDAP://rootDSE
  2012-09 - 06T 12: 16:52.155 + 02:00 ERROR (0610-0E5C) < WSAdminDomainTimerThread > [ws_admin] cannot bind to LDAP://rootDSE
  2012-09 - 06T 12: 31:53.182 + 02:00 ERROR (0610-0F68) < WSAdminDomainTimerThread > [ws_admin] cannot bind to LDAP://rootDSE
  2012-09 - 06T 12: 46:53.194 + 02:00 ERROR (0610-092 C) < WSAdminDomainTimerThread > [ws_admin] cannot bind to LDAP://rootDSE
  2012-09 - 06T 13: 01:54.217 + 02:00 ERROR (0610-08E4) < WSAdminDomainTimerThread > [ws_admin] cannot bind to LDAP://rootDSE
  2012-09 - 06T 13: 16:54.227 + 02:00 ERROR (0610-0504) < WSAdminDomainTimerThread > [ws_admin] cannot bind to LDAP://rootDSE

  Anyone got any suggestions?

  Hello

  The plugin ws_admin trying to make field checks every 15 minutes, but given that your security server is not on the field these checks fail. It is completely harmless, but they should not run in first place, I raised this in their own country.

  Mike

  Edit:

  There is a simple solution for this in 5.1.x:

  Under the current registry key HKLM\Software\VMware, Inc. \VMware VDM\plugins\wsnm\admin, create a new key named Params, and under that a new DWORD value named InitiateDomainChecks with 0 data. Once set, you will need to restart the VMware View Security Server service for the change to take effect.

• Deliver in clone of the EBS R12 on Vmware machine on the same server

  Hi Experts,
  
  To clone an EBS r12 DB for Vmware machine that are running on the same server which is RHEL 6 64 bit OS platform.
  
  EBS r12 software needs to be installed on the vmware machine prior to EBS r12 DB can be clone on it?
  
  Can we clone EBS r12 database by restoring fair EBS DB files or through rman on the vmware that has just installed RHEL 6.
  
  Please suggest what are the means or how EBS r12 DB can be the clone of Vmware server which is not installed software EBS r12 have? What is the best.
  
  
  Thank you!!

  971054 wrote:
  We have installed all the pre - req RPMS under Linux x 86-64 [761566.1 ID]

  Could you please elaborate a bit more on how we could use rman to clone an EBS db to vmware.
  Since vmware is not have ebs or in this case installed oracle software.

  If we use the quick clone IE when we can run the adpreclone on the source applications & level db or more specifically
  How we could run the adcfgclone on the target since it is not have installed software ebs. Could you please develop.

  Thank you!
  Priya

  You must copy all applications and files nodes of level database from the source to the target servers-this is already explained/mentioned in the documents mentioned above.

  Thank you
  Hussein

• Newbie: Mobile Server and Oracle DB must be on the same server?

  Hello Forum...
  
  I have problems to install the mobile server (ver. 10.3.0.2.0).
  
  First of all, I tried to install within an instance of the OAS (ver. 10.1.3.0.0) - I could not set the password of the mobile server oc4j account in enterprise manager server application and is stuck there. Also, I couldn't connect to webtogo as mobile server administrator.
  
  Second, I have installed the version of stand-alone mobile server, but when I run the 'runmobileserver.bat' I get the following error:
  
  09/08/22 12:54:21 log9: connect as: MOBILEADMIN
  09/08/22 12:54:21 log9: Mobile Server ID not found, impossible to register.
  09/08/22 12:54:21 log9: java.sql.SQLException: ORA-00942: table or view does not exist
  
  Like the previous time, I couldn't connect to the webtogo as mobile server administrator. [OS: windows 2003 Enterprise in both cases]
  
  I was informed by my dba that Oracle mobileserver will work only if it is installed on the same server as the backend database. Is this true?
  
  Thank you
  j - p.

  Hi J - P,

  When you installed the mobile server in stand-alone mode, repwizard was not performed or has failed.
  Try to rerun repwizard with: $ORACLE_HOME/mobile/server/admin/repwizard
  You can check the log file in $ORACLE_HOME/mobile/server/repository.log to see if there is a critical error,
  the repwizard should save your mobile server, you can consult this table: mobileadmin.mobileserver_instances so you can see your host name and port.

  On the Mobile Server OAS installation, you should not need to use the oc4jadmin password as if you installed OAS 10.1.3 and run the runinstaller lite Oracle to install Oracle lite 10.3.0.2. in the same ORACLE_HOME with run of the OAS, it should automatically deployed the mobile server j2ee application in the OAS.

  Kind regards.
  Marc
  PS: To change the OC4JADMIN password you can use the note: Note.460314.1 Ext/Pub cannot establish a connection with OC4J instance mobileserver on application server

• Running the Single Instance and RAC on the same server of different homes.

  Hi guys,.

  I already have 4 node RAC12c installed on OLE 6.

  I'm planing on some of my other 12 single instance databases on other migration for RAC nodes.

  Please correct me here if I am wrong...

  My understanding is that, to be able to use DBCA or rconfig for conversion of database instance RAC, the only instance and RAC cluster must run on the same server or machine node.

  Thanks to this understanding... Am planing on the installation of a binary single instance on one of my cluster node node1 say and then use RMAN to duplicate the single instance or just an RMAN restore from the node of the instance that is unique to this node1. Am capable of this plan must then use DBCA or rconfig to convert the CARS database.

  Now, my question is can I run a single instance and RAC on the same server for different homes with different database ports?

  2. for these unique instance that runs on the server RAC 1 node, can I use the RAC database listener that runs from the House of the grid or I have to create another auditor?

  Thank you in advance and also let me know if I can use DBCA or rconfig when the only instance and rac database are on separate nodes.

  K

  Fix. And that's what I would normally do. In general, I would have just an ORACLE_HOME directory that can be used by the punctual and RAC databases at the same time.

  See you soon,.
  Brian

• FMS 3.5 R2 2012 and with Wowza Server on the same server

  Hello

  Is it possible to have my old FMS 3.5 on the same server, as I installed 3.6 Wowza?

  The server is windows Server R2 2012.

  I installed the FMS, but it does not start after installation and bat files cannot start/stop service either. It makes not a difference if I go to Services to start manually, the sample files still does not work.

  Any suggestions?

  Thanks in advance

  HC

  Hi Hans Christian RVN,

  FMS 3.5 is not supported on Win 2012 R2. You can give it a spin on the platforms supported listed in https://www.adobe.com/support/documentation/en/flashmediaserver/357/FMS_357_Release_Notes. pdf.

  ~ Ashish

• PowerCLI and vCLI - install both on the same server

  Hello

  Probably a stupid question, but I vCLI installed on the server vCenter Server (necessary for a health script that is running)

  Can I install powercli on the same server and use powergui etc. ?

  See you soon

  When your environment is locked, you of course have to execute scripts on the vCenter.

  It's a trade-off between security, ease of use and potential risks.

  But each site must make their own environment analysis

• How can I create a cluster of two instances that are running on the same server?

  Hello
  I can't find how to create a cluster or even a rule of failover for my two instances that are running on the same server ODSEE 11 GR 1 material.
  Could you please help?
  
  Thank you

  Hello
  Clustering (intended as Sun Cluster, Veritas Cluster, etc...) IS NOT supported since 7.0:

  http://docs.Oracle.com/CD/E20295_01/PDF/821-1216.PDF [page 20]

  and, according to my own experience, is the WORST way to achieve high availability of Service LDAP directory and in a way almost CONCEDED for replication problems in your topology (lock, split, re-init, etc...).

  Please use the "application level" collection that you get out of the box with the multimaster replication.

  http://docs.Oracle.com/CD/E20295_01/HTML/821-1217/index.html

  http://docs.Oracle.com/CD/E20295_01/HTML/821-1220/fhkry.html#scrolltoc

  HTH,
  Marco

• Restore the backup with a new name and a different location on the same server

  Hi all
  
  I did a complete backup of my current PROD. Is it possible to restore the database on the same server, but with a different instance name, db_name and on another location?

  PRM says:
  Hi all

  I did a complete backup of my current PROD. Is it possible to restore the database on the same server, but with a different instance name, db_name and on another location?

  If you use RMAN my awnser is not.

  You cannot change the name of the database before open resetlog.

  But you can make this work without problem using the same server.

  You will need to change some parameters.

  Create a PFILE from SPFILE (prod) change parameter 'db_unique_name' file new name (ex TEST).

  Change all the value of PROD TEST except db_name parameter must be PROD.

  CREATE a SPFILE from this PFILE (spfileTEST.ora)
  Create a new password file (orapwTEST)

  So you can start this new Instance_name (TEST).

  Restore the PROD to TEST instance database, you will need use set new name to the file data or database (depends on which version you use)

  Retrieve the instance PROD database (TEST)

  It is time to open resetlogs...
  !!!!!!!!!!!!!!!!!!!!!!!!!!!! ATTENTION HERE!

  You need change redo log location before open resetlogs, you must query v$ logfile member column and change it to another location.

  After change you can open resetlog.

  Now its time to change name of database.

  Stop and start Mount

  Use the NEST

  NEST target=sys/password@instance DBNAME = TEST

  When this process is complete, NEST will be closing database.

  So you will need to start with nmount change db_name to the TEST and reset the parameter 'db_unique_name' (alter system reset db_unique_name)

  Then stop and start upstairs question OPEN DATABASE RESETLOGS and is done.

  HTH,
  Levi Pereira

  Published by: Levi Pereira on August 27, 2012 13:09

• Can the vcenter server that an ESX host is connected to determine through query of the esx host cmd line?

  Can the vcenter server that an ESX host is connected to determine through query of the esx host cmd line?

  All points will be awarded. Thxs.

  Look in

  /etc/opt/vmware/vpxa/vpxa.cfg
  

  you will see that the IP VCMS listed something like

  1.1.1.1
  

• SRM and VCenter on the same server?

  I was just by reading the documentation and I saw that I need to have vCenter in both places in my SRM deployment. Now I'm on a server. SRM and vCenter co-exist on the same server? Is it still a good idea. I don't have a problem with the purchase of another server if I need to.

  I have a follow-up question on the vCenter licenses. Do I need to purchase a second license for the recovering site vCenter?

  -Patrick

  SRM and VCenter can coexist on the same server.  You will see a performance impact when you test your disaster recovery plan.  I think that a lot of achievements have vCenter and SRM on the same server.  If you do not want to take the risk of a performance hit on your vCenter server you might move RS for its own box, but I advise to use a virtual machine instead of another physical server.

  I think that you need a license of vCenter to each site.  If your recovery site hosts only the DR then you can use your existing licenses for ESX.  If your DR will site also its own VM produciton is then you will need full license.

• 11.1.2.1 EMP can be installed on the same server where 9.3.1 is installed?

  11.1.2.1 EMP can be installed on the same server where 9.3.1 is installed?

  You will always use the 9.3.1 existing environment alongside 11.1.2.1? If Yes, according to 11.1.2.1 documentation, if you want to keep your previous version environment, you must install a
  new machine and you need to replicate data. Previous installation may not work if it is installed on the same computer.

  You install and configure the software version 11.1.2.1 in a new location and move applications and data to the new environment of deployment.

  (1) install the EPM system on a new machine or machines. You can reuse the data and the existing database, or replicate the database and data to a new machine.
  If you migrate to a new machine, you must upgrade to a platform of the same type.

  For example, if the previous version was on a Windows machine, you must upgrade to a Windows machine. If the previous version was on a Linux machine, you must upgrade one
  Linux machine.

  (2) install the EPM system on the machine or machines (Oracle recommends that you install in a new installation location). You can reuse the data and the existing database, or replicate the database and data to a new machine.

  What is written on page 174 of the EPM 11.1.2.1 Setup Guide (http://docs.oracle.com/cd/E17236_01/epm.1112/epm_install_11121.pdf)

  I hope this helps.