Can the NAT of ASA configuration for vpn local pool

We have a group of tunnel remote ipsec, clients address pool use 172.18.33.0/24 which setup from command "ip local pool. The remote cliens must use full ipsec tunnel.

Because of IP overlap or route number, we would like to NAT this local basin of 172.18.33.0 to 192.168.3.0 subnet when vpn users access certain servers or subnet via external interface of the ASA.  I have nat mapping address command from an interface to another interface of Armi. The pool local vpn is not behind any physical interface of the ASA. My question is can ASA policy NAT configuration for vpn local pool.  If so, how to set up this NAT.

Thank you

Haiying

Elijah,

NAT_VPNClients ip 172.18.33.0 access list allow 255.255.255.0 10.1.1.0 255.255.255.0

public static 192.168.33.0 (external, outside) - NAT_VPNClients access list

The above configuration will be NAT 172.18.33.0/24 to 192.168.33.0/24 when you go to 10.1.1.0/24 (assuming that 10.1.1.0/24 is your subnet of servers).

To allow the ASA to redirect rewritten traffic the same interface in which he receive, you must also order:

permit same-security-traffic intra-interface

Federico.

Tags: Cisco Security

Similar Questions

  • Router ignores the policies configured for VPN

    These are the policies that are configured for phase 1:

    crypto ISAKMP policy 1

    BA 3des

    md5 hash

    preshared authentication

    Group 2

    lifetime 28800

    !

    crypto ISAKMP policy 3

    BA 3des

    md5 hash

    preshared authentication

    Group 5

    lifetime 28800

    !

    crypto ISAKMP policy 5

    BA aes

    preshared authentication

    Group 2

    !

    crypto ISAKMP policy 7

    BA aes

    preshared authentication

    Group 2

    lifetime 28800

    !

    crypto ISAKMP policy 9

    BA aes 256

    preshared authentication

    Group 2

    lifetime 28800

    However, this is what tells me my debug:

    16 Jul 18:23:19: ISAKMP: (0): pair found pre-shared key matching 67.216.78.20

    16 Jul 18:23:19: ISAKMP: (0): pre-shared key local found

    16 Jul 18:23:19: ISAKMP: analysis of the profiles for xauth...

    16 Jul 18:23:19: ISAKMP: (0): audit ISAKMP transform 1 against the policy of priority 1

    16 Jul 18:23:19: ISAKMP: DES-CBC encryption

    16 Jul 18:23:19: ISAKMP: MD5 hash

    16 Jul 18:23:19: ISAKMP: group by default 2

    16 Jul 18:23:19: ISAKMP: pre-shared key auth

    16 Jul 18:23:19: ISAKMP: type of life in seconds

    16 Jul 18:23:19: ISAKMP: life (IPV) 0 x 0 0 x 0 0x1C 0x20

    16 Jul 18:23:19: ISAKMP: (0): free encryption algorithm does not match policy.

    16 Jul 18:23:19: ISAKMP: (0): atts are not acceptable. Next payload is 0

    16 Jul 18:23:19: ISAKMP: (0): audit ISAKMP transform 1 against the policy of priority 3

    16 Jul 18:23:19: ISAKMP: DES-CBC encryption

    16 Jul 18:23:19: ISAKMP: MD5 hash

    16 Jul 18:23:19: ISAKMP: group by default 2

    16 Jul 18:23:19: ISAKMP: pre-shared key auth

    16 Jul 18:23:19: ISAKMP: type of life in seconds

    16 Jul 18:23:19: ISAKMP: life (IPV) 0 x 0 0 x 0 0x1C 0x20

    16 Jul 18:23:19: ISAKMP: (0): free encryption algorithm does not match policy.

    16 Jul 18:23:19: ISAKMP: (0): atts are not acceptable. Next payload is 0

    16 Jul 18:23:19: ISAKMP: (0): audit ISAKMP transform 1 against policy priority 5

    16 Jul 18:23:19: ISAKMP: DES-CBC encryption

    16 Jul 18:23:19: ISAKMP: MD5 hash

    16 Jul 18:23:19: ISAKMP: group by default 2

    16 Jul 18:23:19: ISAKMP: pre-shared key auth

    16 Jul 18:23:19: ISAKMP: type of life in seconds

    16 Jul 18:23:19: ISAKMP: life (IPV) 0 x 0 0 x 0 0x1C 0x20

    16 Jul 18:23:19: ISAKMP: (0): free encryption algorithm does not match policy.

    16 Jul 18:23:19: ISAKMP: (0): atts are not acceptable. Next payload is 0

    16 Jul 18:23:19: ISAKMP: (0): audit ISAKMP transform 1 against the policy of priority 7

    16 Jul 18:23:19: ISAKMP: DES-CBC encryption

    16 Jul 18:23:19: ISAKMP: MD5 hash

    16 Jul 18:23:19: ISAKMP: group by default 2

    16 Jul 18:23:19: ISAKMP: pre-shared key auth

    16 Jul 18:23:19: ISAKMP: type of life in seconds

    16 Jul 18:23:19: ISAKMP: life (IPV) 0 x 0 0 x 0 0x1C 0x20

    16 Jul 18:23:19: ISAKMP: (0): free encryption algorithm does not match policy.

    16 Jul 18:23:19: ISAKMP: (0): atts are not acceptable. Next payload is 0

    16 Jul 18:23:19: ISAKMP: (0): audit ISAKMP transform 1 against the policy of priority 9

    16 Jul 18:23:19: ISAKMP: DES-CBC encryption

    16 Jul 18:23:19: ISAKMP: MD5 hash

    16 Jul 18:23:19: ISAKMP: group by default 2

    16 Jul 18:23:19: ISAKMP: pre-shared key auth

    16 Jul 18:23:19: ISAKMP: type of life in seconds

    16 Jul 18:23:19: ISAKMP: life (IPV) 0 x 0 0 x 0 0x1C 0x20

    16 Jul 18:23:19: ISAKMP: (0): free encryption algorithm does not match policy.

    16 Jul 18:23:19: ISAKMP: (0): atts are not acceptable. Next payload is 0

    16 Jul 18:23:19: ISAKMP: (0): audit ISAKMP transform 1 against priority policy 65535

    16 Jul 18:23:19: ISAKMP: DES-CBC encryption

    16 Jul 18:23:19: ISAKMP: MD5 hash

    16 Jul 18:23:19: ISAKMP: group by default 2

    16 Jul 18:23:19: ISAKMP: pre-shared key auth

    16 Jul 18:23:19: ISAKMP: type of life in seconds

    16 Jul 18:23:19: ISAKMP: life (IPV) 0 x 0 0 x 0 0x1C 0x20

    16 Jul 18:23:19: ISAKMP: (0): offered hash algorithm does not match policy.

    16 Jul 18:23:19: ISAKMP: (0): atts are not acceptable. Next payload is 0

    16 Jul 18:23:19: ISAKMP: (0): no offer is accepted!

    16 Jul 18:23:19: ISAKMP: (0): phase 1 SA policy is not acceptable! (local 65.118.143.194

    distance 67.216.78.20)

    The router is completely ignoring all configured policies and try with anything else than the default. Is this a bug?

    Hi Jason,

    What you see is the policy of isakmp that offers the peer and it is compared to the isakmp policies that you have configured on your router.

    You can add other isakmp policy corresponding to this proposal to see if the phase 1 ends.

    crypto ISAKMP policy 2

    the BA

    preshared authentication

    md5 hash

    Group 2

    life 7200

    What is the camera peer?

    Kind regards

    Loren

  • who can help me with "insufficient resources to meet the level of failover configured for vSphere HA.

    Hello world

    We tried to gif a 14GB of ram and make server complete a booking for her.
    This is a server for the exams and the vendor told us to do.

    I can't any more then 5500MB reservation on it, when I anymore that I get
    "Insufficient resources to meet the level of failover configured for vSphere HA.

    We have:

    2 X 5.1 ESXi hosts
    Each host has
    2 x processors (8 Cores each) with HT active.
    255,75 GB of Ram

    vSphere HA has been activated.
    Admission control policy is enabled and that the ability to failover is 1 host.

    What is the problem here?

    Thank you
    Ernst.


    Admission control policy is all about to give you the kind of guarantee that if the host failure happens then there will be enough resources to perform the successful failover.

    in simple terms, it comes to reserve the resources of failover.

    I would recommend going through the notion of vSphere HA, reduced control policy the following document.

    https://pubs.VMware.com/vSphere-60/topic/com.VMware.ICbase/PDF/vSphere-ESXi-vCenter-Server-60-availability-Guide.PDF

    From the Page number 22, the details that you need to study is given. Focus especially on part calculations Slot size of it.

    in your case you HA vSphere with number of failure of host to tolerate as admission control strategy defined.

    This means system will calculate CPU and memory slots out of the resources in your cluster, and the total number of units, it will keep some resources like reserved for failover, and others will be available to be used. It all depends on how much failure of hosts that you want to tolerate.

    now in your case, if you try to increase booking one of the virtual machine, which will then affect the number of locations in your environment, and so reserved ability to failover is violated, the system will not let you do what you want to do. As the energy on a virtual machine, or growing booking a powered VM etc..

    If you find that you have enough resources in your cluster and due to some virtual machines with very large cpu or memory reservation, number of places is less than you can still manage the settings some advanced in vSphere HA configuration, but I strongly recommend, try to take the help of someone who has done it before.

    also try to go through other admission control strategies which are explained in the document for more inputs.

  • Try to connect to the network, get a msg "the server is not configured for transactions.

    I have a desktop running Vista Professional (SP2) and a laptop running XP Professional (SP3). They are connected by a WiFi network, the Desktp acting as a server. Everything worked well until the Office had a problem and had to have re-installed Windows. Now, although the Office can find the laptop, the laptop can not find the office or its working group. I get a message " is not accessible. You might not have permission to use this network resource. Contact the server administrator to find out if you have access permissions. The server is not configured for transactions. »

    • But once, for about five minutes, it worked - and then stopped again. For no apparent reason.
    • If I connect with an Ethernet cable and no WiFi machines, the last sentence of this message changes to "the list of servers of this working group is currently unavailable."
    • When you run the Configuration Wizard from the network on the laptop, he told me that I have to run the Wizard "on each of the computers on your network. To run the wizard on computers running XP, you can use the Windows XP CD or a network setup disk". I was not able to do so - the XP disc I have does not behave as indicated by the wizard and the wizard does not recognize my CD - RW drive to create a network setup disk.

    Can anyone help?

    Well, who has not responded to my problem, but it was eventually fixed by a support guy with the company who sold me the desktop PC. As I understand it, it was a problem of file sharing. Seems he had to undo sharing all my records on the desktop, then re - share once again, since when I did not have this particular problem. But it's obviously not ideal (in MS eyes at least) to the network of computers with different operating systems.

  • What is the function of the IOS minimum set required for VPN site-to-site software?

    Hi guys,.

    I have a Cisco 1841 router to do a VPN site-to site. I would like to know what is the function of the IOS minimum set required for VPN site-to-site software?

    Thanks in advance.

    Hi Ja,

    Advanced security or more should do it. The version of the IOS, you can try later 12.4 T which is c1841-advsecurityk9 - mz.124 - 24.T5.bin, in which case you don't want to go to 15.1 still.

    I hope this helps.

    Raga

  • Not enough resources to meet the level of failover configured for vSphere HA

    I have a cluster of vSphere based 5.0 based on ESXi 5 knots 2.

    When I try to start a virtual machine, I get an error saying that there is "insufficient resources to meet the level of failover configured for vSphere HA.

    If I turn off an another VM the problem disappears and I can turn on my VM.

    If I try to turn on the virtual machine, I have already turned off, I get the error again.

    It seems obvious that there is a lack resources or some setting is misconfigured, but even after reading the forums and manuals, I am unable to locate the critical resource or parameter that is not correct.

    Based on my experience or vSphere server and ESXi servers are overloaded.

    I have an another similar cluster of hosting a larger number of virtual machines with no similar problem.

    This performance counter and this setting should check to identify the bottleneck?

    Concerning

    Marius

    To check reservations for virtual machines, I would select the Cluster in your vCenter inventory, then select the resources"" tab.  Which displays the child objects of the bunch (VMs, Resource Pools, vApps).  There you can watch settings of CPU resources and memory.  You'll want to watch the column of "Reserves".

    To find the size of the slot and places available, look at the tab "Summary" of your cluster.  There is a tile marked "vSphere HA.  In this mosaic, there will be a link for "Advanced Runtime Info" which will open a new window with the location information.

    When the Admission AP policy is set to "Number of failures of host cluster will tolerate", HA has a very pessimistic view of your resources, since it must be able to handle all the possibilities.

    Another option would be to change the admission control strategy in settings of Cluster HA to "percentage of resources reserved for failover.  It reserves a part of the resources for use by HA in the case of a failover, rather than trying to calculate the size of the individual virtual machines.  With a 2 cluster nodes, I think it a relatively safe bet to set these values to 50%, as your worst case scenario HA would be losing a single host on 2.

  • Can the ipad pro be used for things like making project or a home school work?

    can the ipad pro be used for school of the thing (example: make the projects or homework)

    I do not have the ipad pro but I want but im trying to find something that can help the school things and when im not doing anything school i can have

    Something to entertain me.

    but my big question is can the ipad pro et for these things? (entertainment and school thing)

    You should ask your classmates what their experiences have been.

    Many schools use iPads.

    Check in the iPad app store for applications you need.  Microsoft office is available for the ipad.  It's a lean down.

    The education of web sites use flash.  The ipad does not support flash directly.  The substitution may not give you 100% flash.

    Flash on the iPad and iPhone

    Atlantic Puffin

    "Puffin Web browser is a wicked fast Browser Mobile Flash. Once users experience the exciting Puffin regular mobile Internet speed will be like torture. "Puffin Free is the free version of the family of puffins and supports Adobe Flash on cloud 'off-peak' from 08:00 to 16:00 (subject to change without notice).

    Free:

    https://iTunes.Apple.com/us/app/Puffin-Web-browser-free/id472937654?Mt=8

    Paid:

    https://iTunes.Apple.com/us/app/Puffin-Web-browser/id406239138?Mt=8

    Photon Flash Player for iPad - Flash Video & games more private Web Browser
    https://iTunes.Apple.com/us/app/photon-Flash-Player-for-iPad/id430200224?Mt=8

    "for iPad java is now a reality! .
    If you are still wondering how to use java for iPad, now you can! With virtual Firefox app, java for iPad browser is possible with a download simple app! Virtual browser for Firefox App opens a wide variety of games and applications - as java for iPad - that you can use for your iPad"
    http://www.virtualfirefox.com/Java-for-iPad

    By Splashtop Inc..
    Flash Video Web Browser - Full Chrome, IE, Firefox, Safari Compatible
    https://iTunes.Apple.com/us/app/Flash-video-Web-browser-full/id431331485?Mt=8

  • ASA Configuration of VPN Site to Site - NAT issues

    Greetings,

    I am responsible to configure a VPN connection from site to site to a business partner in which I want to firstly NAT to my internal IP to a public IP address and then send it through the tunnel, and vice versa when they try to access my servers I want to get to them through the external IP address.  Here's what I think I do, but I was wondering what were the thoughts of the community.

    All of the IP addresses represented below are fictitious.

    Internal servers Public IP address         

    10.50.220.150 208.180.170.182

    10.50.220.151 208.180.170.183

    10.50.220.152 208.180.170.184

    Local peer IP: 208.180.254.29

    Distance from peer IP: 207.190.218.31

    Local network: 208.180.170.0/24

    Remote network: 207.190.239.0/24

    From my understanding, NAT occur before being sent to a tunnel, or to the internet, etc, so the configuration that I think I need is the following:

    NAT (inside) 0 access-list sheep

    NAT (inside) 2 10.50.220.150

    NAT (inside) 3 10.50.220.151

    NAT (inside) 4 10.50.220.152

    Global 2 208.180.170.182 (outside)

    overall 3 208.180.170.183 (outside)

    Global 4 208.180.170.184 (outside)

    IP 208.180.170.0 allow Access-list extended sheep 255.255.255.0 207.190.239.0 255.255.255.0 (do I still need this since coordinated to a public IP address still?)

    access-list s2s client scope ip 208.180.170.0 allow 255.255.255.0 207.190.239.0 255.255.255.0

    Route outside 207.190.239.0 255.255.255.0 207.190.218.31

    card crypto off peers set 1 207.190.218.31

    Crypto card outside 1 correspondence address s2s-customer

    [... rest of the configuration failed..]

    That look / her right? If this isn't the case, please advise.

    Thank you.

    Yes.

    PAT (nat/global) will take care of outgoing and static traffic will take care of incoming traffic.

    You can create political NAT as well to handle this traffic.

    Federico.

  • How can I remove guest account configured for the administrator?

    I tried to add a second user account on my computer and I blew it. My main user account is now defined as a standard account and no matter how many times I click the button to set it as an administrator account that he will not save these settings. The guest account (which I want to delete) is defined as an administrator account and it wont let me save it as a standard account, because there is no other administrator accounts. Even when I try to create a new account just to see what he would do he tells me that he cannot accept some of the characters that I use for the name of the account, even if it's just 5 letters, so I can't even create the new account.

    I have no idea what's going on with my user settings, but I want to just that everything back to how it was before... with a single main account configured for the administrator.

    Can someone help me?

    I bet that your administrator account is an admin account and your guest account is a regular account. Buttons that you look at don't tell you the State of the special consideration, but the change that you can apply. In other words, looking at the administrator account, the 'Administrator' button is highlighted not because it's already an admin account!

    Now you should do this, in the following order:
    1. Create a CD to repair Windows via Control Panel / backup and restore. People like you who make their own PC maintenance need.
    2. Test the CD.
    3. Create, test, and document an admin account to spare, even you have a spare House key.
    4. Disable the guest account.
  • Can I do a voltage simple registration when the SCB-68 is configured for cold junction Compensation?

    Hello world

    I use a 6221 card PCI and the SCB-68 plug-in. I put the SCB - 68 module switches so that 5 thermocouples that I have connected between AI1 and AI5 use AI0 cold junction Compensation. Everything works fine.

    Could someone tell me if the differential inputs left AI6 AI7 can be used for the registration of another type of sensor (nothing to do with a thermocouple)? I guess I just need to put these 2 entries to a voltage simple recording function? Previous switches settings to make this simple recording?

    Thank you

    User

    You can read some signals you want in the remaining channels.  Be careful, however.  If you scan at a high rate, the thermocouple inputs will not have the time to settle.  Changing gains and ranges can ruin you, also.  Once I had to analyze a shorted channel (a rider or an internal channel) to clear the entries before moving on to thermocouples.  Adding channels "in white" to your scan list can do wonders.  You can read the manual to learn the order of the channel scan - I remember old E analyzed in reverse sometimes series cards.

    Bruce

  • Select the timeout on ASA Cisco Anyconnect VPN

    Hello world

    I use the Cisco Anyconnect VPN client with the ASA 5540 firewall. I need allow a time-out on the VPN clients, so they log off after x hours of inactivity.

    Thank you to

    Best respect

    Hello

    To my understanding of the default timeout value is 30 minutes

    You should be able to change this setting in the "username" configurations (if you use LOCAL AAA on the SAA) or under the configurations of the 'group policy' .

    The command is

    VPN-idle-timeout

    Here is the link of the commands reference

    http://www.Cisco.com/c/en/us/TD/docs/security/ASA/ASA-command-reference/...

    -Jouni

  • ESXi 5.1 - insufficient resources to meet the level of failover configured for vSphere HA

    Hi, I tried to understand why there are insufficient resources to supply an only little VM in my vSphere cluster.

    2 X 5.1 ESXi hosts

    Each host has

    2 x processors (8 cores each) with HT active

    192 GB OF RAM

    vSphere HA has been activated.

    Admission control policy set to "tolerate failures of the host in the cluster" with the value 1.

    With 2 GB of vRAM and 1 vCPU has created a virtual machine.  No memory and CPU Hotel booking.

    I put one of the host in maintenance mode and try to turn on the virtual machine, but it failed to power upward with the error "insufficient resources to meet the configured switch level for vSphere HA.

    Am I missing something?

    Thank you

    Alex

    I put one of the host in maintenance mode and try to turn on the virtual machine, but it failed to power upward with the error "insufficient resources to meet the configured switch level for vSphere HA.

    When having two hosts only no host doesn't stay for failover when one of these hosts are in maintenance mode... That is why it gives you this message...

    / Rubeck

  • Not enough resources to meet the level of failover configured for HA

    Hello!

    This error message is pretty well documented on the VMware site and elsewhere. It is received when it exceeds the capacity of (CPU and RAM) calculated the HA cluster resources.

    That said, despite what I understand, I can't understand why I runner of am limited to VMs than 6 (otherwise, the I get message error en the title) on cluster of United Nations HA (FT not DRS) of 2 servers, while the alors que les ressources resources averages used are about 10 to 20% only of those available for.

    I have 40GB of RAM and 19.2 GHz per server. I calculated according to the method explained here: http://www.yellow-bricks.com/vmware-high-availability-deepdiv/.

    Maximum reserve of United Nations I 2 GB and 2.2 GHz on VMS (less pay some), but the limits are left in general 'Unlimited '. The 'Actions' are 'Normal '.

    In short, here are the numbers that vSphere client gives me pour the cluster:

    CPU:

    Total capacity: 37440 MHz

    Reserve capacity: 27424 MHz

    Available capacity: 10016 MHz

    Memory:

    Total capacity: 74009 MB

    Reserve capacity: 27865,88 MB

    Airline booking: 0 MB

    Available capacity: 46143,12 MB

    What Miss me?

    How about you? You drive your virtual machines with what reservations? (I tried to roll them up to 0, but some virtual machines (originally imported from GSX in ESX 3.5 and ESX 4.0) won't roll or plant.)

    P.S. Yes! I know that I can from this error by clicking "Allow VMs to be powered even if they violate the constraints of availability", but I like to keep the option of 'prevent' up to ' that I understand better what happens... or doesn't.

    Thanks in advance...

    Hello

    I have one exception that has a reservation... others are not and everything works fine.  I suggest you check your VMs.  There the maid to do following an import.  The exception is pour terminal type servers or in some circumstances you can have some problems.

    Jeff | VCP4 | VCDX

  • All the desktop icons are configurΘ for dΘmarrer with Internet Explorer

    original title: cannot open programs.

    Each program on my desktop has the same icon (Internet Explorer).  When I click on any of them, it opens "display and track your downloads" is the program I want on the page that opens, but I can't access this program.

    The only program I can access Internet Explorer, which works very well.

    If I'm going to start--> all programs, I noticed everything, but once again, they have all the knowledge icon.  And cannot be opened.

    How can I get the icons on the desktop to go back ot their original photo?

    Hello


    1. what operating system is installed on the computer?
    2. were there any changes (hardware or software) to the computer before the show?
     
    Run the FixIt and see if the problem is resolved.
    http://support.Microsoft.com/kb/950505
     
     
    Hope this information helps.
  • can the WRT54GL router be configured to operate as a point of access/switch?

    The router connected to the internet is a WRP400, and I've got a WRT54GL connected via PLN to improve the signal. I would like to have the WRT54GL work like a switch and point of access, is this possible? The problem is that, in order to have my TV box work, I need the WRP400 to assign IP addresses. Does make sense, and it is possible to make this work?

    Regards, Martin

    This makes sense... for many people... probably at least twice a day in this forum...

    See here for an answer to this FAQ.

    A roaming wireless network set up the two access points with the same SSID and wireless security settings. Choose from different channels, at least 5 pieces, for example 1 & 6.

Maybe you are looking for

  • Equium P300-16 - which was an original price?

    Hello Anyone know what the original price was for the Toshiba Equium P300-16?

  • Name of resource VISA includes serial number

    I'm trying to find a way to communicate with the Analyzer Signal Agilent/Keysight N9020A via Ethernet. NEITHER Max, resource VISA for the instrument name as TCPIP0::A-N9020A-90040::instr0::INSTR The 90040 is part of the serial number for a particular

  • Envy 15-j108el: update Wi - Fi adapter

    Hello I would like to know if I can update/change my wireless HP Envy 15-j108el adapter because I have too many problems with this, the connection is very slow and only standing next to the router I can surf the internet in a decent way. The adapter

  • Can I update my system to connect to a wireless network?

    is it possible to convert a vista inspiron 530 for a wireless connection I run an Inspiron 530 Vista OS, it's the outside improved power supply basic package and the graphics card.

  • Studio EN - grid Insert gives error 11.1.2.3.500

    HelloI installed 11.1.2.3.000 EMP and then applied the patch pour.500.  Everything works as expected.I try to access EN studio and create a new State, and then insert a grid and it throws me error like below.any help will be much appreciated.Thank yo