Can the utility Airport automatically adjust a mobile wireless network to a non roaming wireless network?

Similar Questions

• minimize the browser and automatically adjust the text

  Hello

  How can I reduce the browser and automatically adjust the text in Adobe Muse?

  I want to get the same effect as on this page:

  http://Bienz-photography.ch/

  on the departure site, there is the "Welcome" text and if I reduce the browser the text adjusts automatically.

  How can I do?

  Thanks for your help.

  What you re looking is delicate design which is not yet supported by Muse.

• What Version of the utility Airport do I need?

  I have 2 Apple Airport Extreme Base Stations.

  On my old Dell Dimension 9200 running XP Professional Service Pack 3, I use Version 5.5.3 of Airport utility.

  Now, I want to download Airport utility for my new Dell Precision Tower 5810 running Windows 8.1 Pro 64-bit.

  What Version of the utility Airport should I download to my new computer?

  The latest version of the AirPort for Windows utility still is 5.6.1. He was released in 2012, so it's a bit outdated. I used it with Windows 7, 8, & 10, but he will not be able to administer the current base station 802.11ac airport.

• The utility Airport and Time Capsule, not appear...

  Hello all! I have an old TC (not sure how old but less than 3 years) which appears in Airport utility on my iPhone but not on my Mac. I have my TC in Bridge mode.

  During the night, we lost our internet connection so this morning, I restarted my modem/router to Comcast. He looked like my TC starts fine but when I open the Airport utility on my Mac it isn't here, but if I open Airport utility on my iPhone 6 is here. I wonder why it appears on one and not the other...

  Thank you for your valuable information and knowledge! Judy

  You only need a device with AirPort Utility installed to be able to administer all the airport on your network routers... and, as you have found... the software on the iOS version of the utility is better than the software on a Mac.

  Thus, an option would be to use Airport utility on the iPad and not to use it on the Mac.

  If you want to keep the AirPort Utility to work on your Mac, there are some settings to check and possibly change that could help with the "airports endangered" issue, who is with us for a few years.  No guarantee that this will help, but it won't hurt either. If you have 10-15 minutes free to work on your Mac, and we'll see what we can do.

• Does not see the utility Airport Airport Extreme or any other device in the House on the network. However, all devices are getting internet.  Backups on external hard drive are going wireless, too. Yosemite day and other software. What should do?

  Said Airport utility cannot find extreme AP, which used to be on the network and shows no other devices on the network. But all devices (MBPro, MBAir, iMac, iPod touch, iPad 2 air2) are connected to the internet. Wireless backups on external drives are being completed. El Capitan 10.11.2; Airport Utility 6.3.6. How do "seen it all" again?

  What should do?

  All you can do is to try to circumvent some of the bugs crawl into El Capitan.

  Given that the AirPort Utility becomes easily confused about what are the devices on the network, it will sometimes help to perform a complete cycle of power on the network. If you want to try it...

  Power off all devices on the network, routers, computers, accessories, mobile devices, printers, etc... in any order you want

  Wait a minute

  Turn on the modem first and let it run by itself for 2-3 minutes

  Then, switch on the device connected to the modem and leaves turn a good minute

  Keep power devices one at a time about a minute out until the entire network is back

  Recheck the AirPort Utility

  If still no luck, we will have to try some repellent on Mac.

• Height of the page not automatically adjusts when the drop down menu expanded

  Using Adobe Muse CC 2015 on a Mac, I created a Web page for my company (www.unafilm.de).  I used a horizontal menu in the master page to the layout of the pages of the subsites (news, movies, about, contact, etc.) to visitors. Everything works well except a menu items which is supposed to display an another 25 points / subpages.  They expand nicely, but I can show all because the height of the page does not take into account the length of the drop-down list. So, I can only see subpages on this particular menu point that allows at the height of the page. The page does not extend and I can also not scroll down.  No idea why? Thanks in advance.

  Is nothing, that you can change. It is simply how browsers work. Unless you want to annoy your customers with a browser window resizing script (bad idea), the window is not adapt. 25 menu entries using is perhaps not the best idea at first, anyway.

  Mylenium

• Change the DNS server automatically when switching to WiFi network?

  I am usually connected to one of the two wifi networks, one I have control on and I'm not. When I am connected to that I have no control over, I usually spend my DNS settings of the network server (which often breaks down) to a third party one, but I end up having to do this every time. Is there a way so that it would automatically change my DNS server whenever I connect to this network? I am running Windows Developer Preview

  Hello

  ·         What operating system do you use?

  ·         Your computer is on a domain network?

  Try these steps and see if it helps.

  Step 1: Run the network troubleshooter utility.

  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

   

   

  Step 2: Try to reset TCP/IP and check.

  http://Windows.Microsoft.com/en-us/Windows7/change-TCP-IP-settings

   

   

  Step 3: Uninstall and reinstall network/modem driver from Device Manager.

  (a) click Start, type Manager of devices in the search box and press ENTER.

  (b) Device Manager window opens, expand the network card.

  (c) right click and uninstall, reboot the system.

   

   

  Step 4:

  Follow the steps in troubleshooting from the link and check if that helps.

   

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

   

   

  Step 5:

  Temporarily disable the security software.

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  Reference: http://windows.microsoft.com/en-US/windows7/DNS-Domain-Name-System-frequently-asked-questions

• Airport Utility/Airport Express

  I have an old Airport Extreme and an old Airport Express with the Express connected via powerline and as an access point and using the same SSID as the end.

  The system actually works very well, but my question relates to Airport utility, namely that the Express appears in THE time time, has a Mark Green beside him for awhile, then the exclamation mark in a yellow triangle telling me it "was" part of my network but it is is no longer accessible.

  This depends on the sound being defined as an access point, or is it just a quirk that I should live with?  Have a system that works, but is not able to check by the utility Airport is a minor and of course much better than the reverse drawback but I'm curious to know why this is happening.  Thank you

  AirPort Utility is based on both the mDNS (aka, Hello) and IPv6 IP protocols to find an AirPort base station. Don't forget that both of your AirPort base stations more iMac are configured for IPv6 link-local only.

  • For a Mac: System preferences > network > Wi - Fi or Ethernet > advanced > TCP/IP tab > configure IPv6: link-local only
  • For the AirPort Base Station:
    Note: You may temporarily connect your Mac or PC directly to the base by Ethernet station to access.
    • From a Mac: AirPort Utility > select the base station > change > Internet tab > Internet Options... > configure IPv6: link-local only
    • Since an iOS device: AirPort Utility > tap the base station > press Edit > tap Advanced > tap on IPv6 > change configure IPv6 to: link-local only > Tap actually

  For mDNS, it is a matter of "all or nothing" since OS X Mavericks. Unfortunately, there is no real settings, you can change this.

  Some references for more information:

  • Base station airPort not seen or "an unexpected error has occurred" appears in point 6.3 AirPort Utility -Apple Support
  • AirPort base station does not appear in the 1.3 AirPort Utility for iOS -Apple Support

• How can I unforget airport Time Capsule?

  I was in the Airport utility and 'forgotten' my Time Capsule airport.  The most convenient airport seems to work very well, but I can see it is no longer in the graphical presentation.  How can I fix so that I see once more the airport?

  Try a cycle of complete nutrition of the network as follows:

  Power off all devices... modem, routers, computers, iPhones, printers, etc. in the order you want

  Wait a minute

  Start the modem and let it run alone for a few minutes

  The device connected to the modem to start and keep running a minute

  Keep the commissioning of the devices at once a minute outside until the entire network is back

  Check if the airport appears now and communicate your results.

  IF... the airport does not appear in the utility AirPort... are you still using OS X (10.7.4) on your Mac, you put in your profile, or you have updated to a more recent operating system?  If so, what system would be that?

• Automatic redirect to mobile site

  is there a way to stop the k1 browser automatically direct to mobile versions of Web sites? I don't see the option listed in the browser anywhere.

  @ccballew,

  In browser type about: debug-> top top of page right-click the lines and setting selection-> select Debug-> UAString-> Desktop-> fact.

  JMT

• How can I disable ipv6 on the newer airport utility for windows?

  I downloaded the latest airport utility for Windows and I can't find any option to disable ipv6. Can someone tell me how to do this.

  You cannot disable IPv6, but you can disable the IPv6 Internet from the Internet connection.

  Open the AirPort for Windows utility

  Click on the router from the most convenient airport to select

  Click on the installation manual

  Click on the Advanced Options (gear icon) button to the top of the AirPort Utility window

  Click on the IPv6 tab, which appears just below Advanced

  Make sure that the IPv6 Mode is set to Link-Local only

  Click Update at the bottom right of the window and allow a minute for the airport to restart

  

• AirPort Express is no show in the utility AP

  Airport Express 1264 does not appear in the chart of AirPort Utility.

  I had my time airport Capsule (3rd generation) running for years.

  Buy a model 1264 1st Gen Airport Express to extend the system.

  CAT6 used to connect Express to Time Capsule but Express is a utility AirPort show

  Not connected Express directly to Mac-Mini photo express is a show.

  2 days, I played and I tried many internet configuration scenarios.

  Can you help me or would it be better to mix the 1264 and buy another Express?

  Thanks in advance,

  Mike

  AirPort Utility is based on both the mDNS (aka, Hello) and IPv6 IP protocols to find an AirPort base station.

  I suggest that you check that your Mac mini is configured for, at least, only link-local IPv6 mode. To do:

  • Run system preferences > network > select depending on how you connect your mini to the network Ethernet or Wi - Fi
  • Select Advanced
  • Configure IPv6: Link-local only
  • Click OK.
  • Click on apply.

• automatically adjust the text when you zoom

  Hello.
  
  I m using Firefox 24 beta on nexus 7
  
  It was working fine until I upgraded to the latest beta version.
  
  then automatically adjust it the text has stopped working when you zoom in, so I have to scroll left and right to continue reading.

  any help?

  Hello, unfortunately the reformatting of the text now does that if you double click on a portion of text (and when the feature is enabled under settings). This was an intentional change in firefox for android 24.

  https://wiki.Mozilla.org/mobile/projects/Reflow_on_zoom
  
  https://Bugzilla.Mozilla.org/show_bug.cgi?id=847872

• Is it possible to use the AirPort Utility software to configure the newest Airport Extreme on Windows 10?

  I ask because it seems to be warnings on the download page, saying that it is for Windows 7 and does not work with all the extremes of the airport.

  Airport utility is obsolete... Apple is more support the AU for windows, it seems...

  The old utility can still install in win10, but it is not until the the version specification AC TC that require an airport of v6 or extreme utility... That is to say a Mac with Lion or later... or the utility version iOS ipad or iphone.

  With your "pen name" iOSJake... I don't know that you have a suitable ipad... Simply load the free utility for the apple store and config airport away.

• I can't change the settings of automatic update on

  I continue to be careful that my automatic update is disabled.  Whenever I have try to change the setting to on it fails and a window opens stating «Security Center can't change your automatic update»  I then try to do it manually and get the same problem.  What to do.  I thought that I may have the conficker virus, but after running a diagnostic of the system of downadup.org... my turns out to be clean.

  Hi Fabrax,

  Thanks for posting on the Microsoft answers Forums.

  Be you please perform a clean boot on your system to see if that helps to clarify the freezing issue that you are experiencing?

  Here are the steps on how to perform a clean boot on your system:

  First step: perform a clean boot

  1. sign your computer with an administrator account.

  2. click on start.

  3. type msconfig.exe in the start search box and press ENTER to start the System Configuration utility.

  4. If you are prompted for an administrator password or for confirmation, type your password, or click on continue.

  5. in the general tab, click Selective startup, and then click to clear the check box load startup items.

  6. on the Services tab, click to select the skin all the Microsoft services check box, and then click Disable all.

  * NOTE: Following this step lets services Microsoft continue to run. These services include networking, Plug-and-Play, record of events, error reporting, and other services. If you disable these services, you can permanently delete all restore points. Do not do this if you want to use to restore the system with the existing restore points.

  7. click OK and then click on restart.

  Second step: enable half the services

  1. start the System Configuration utility. Refer to the steps above if you need to see how to do this.

  2. click on the Services tab and then click to select the skin all the Microsoft services checkbox.

  3 click to select half of the check boxes in the Service list.

  4. click OK and then click on restart.

  Step 3: determine whether the problem returns

  If the problem persists, repeat the first stage and the second stage. In step 2, click to clear half of the check boxes that you have initially enabled in the Service list.

  If the problem does not occur, repeat the first stage and the second stage. In the second step, select only half of the remaining check boxes that are cleared in the Service list. Repeat these steps until you have selected all the check boxes.

  If only one service is selected in the list of services, and you the problem persists, the service selected the cause of the problem. Go to sixth step. If no service is causing this problem, go to step 4.

  Step 4: enable half of the startup items

  Perform a clean boot by repeating step 1.

  Click the Startup tab, and then click to select half of the check boxes in the startup item list.

  Click OK and then click on restart.

  Step 5: determine whether the problem returns

  If the problem persists, repeat the first step and the fourth step. In step 4, click to clear half of the check boxes that you have originally selected in the startup item list.

  If the problem does not occur, repeat the first step and the fourth step. In the fourth step, select only half of the remaining check boxes that are cleared in the startup item list. Repeat these steps until you have selected all the check boxes.

  If only one startup item is selected in the startup item list, and you still experience the problem, start selected in the list element is the service that is causing the problem. Go to sixth step.

  If no startup item causes this problem, a Microsoft service most likely the cause of the problem. To determine which Microsoft service may be causing the problem, repeat the first stage and the second stage without selecting the skin all the box Microsoft services at every step.

  Step 6: resolve the problem

  After you determine the startup item or the service that is causing the problem, contact the manufacturer of the program to determine if the problem can be solved. Or, run the System Configuration utility, and then click to clear the check box of the element of the problem.

  Step 7: solve the problem

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  1. click on start

  2. type msconfig.exe in the start search box and press ENTER.

  3. If you are prompted for an administrator password or for confirmation, type your password, or click on continue.

  4. on the general tab, click the Normal startup option, and then click OK.

  5. When you are prompted to restart the computer, click on restart.

  Here is the KB article that came as follows:

  http://support.Microsoft.com/kb/929135

  After running the clean boot please post back and let us know if it helped to solve your problem or not, so that we can help you if necessary. After you run the startup clean please try and change automatic updating settings again and see if you are still having the same problem. Robyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.