Can transfer easily to be run more than once on the receiving system?

Similar Questions

• Can I use windows 8 recovery more than once?

  * Original title: recovery of Windows 8

  Can I use windows 8 recovery more than once?

  Hello

  You can use the recovery media to reinstall as many times as you wish, as long as there is only a single installation of the operating system installed at any time and if preinstalled recovery media is linked to this machine and cannot be transferred.

  See you soon.

• BlackBerry Z10 Facebook presents more than once in the HUB!

  Dear all,

  I noticed that my Facebook showed more than once in the HUB! and all instance displays something different from each other. Past instances show old notifications that I deleted a long time ago!

  Whenever a connection and disconnection of the Facebook application, a new instance is created inside the HUB! It seems that there is a serious bug in the HUB or Facebook!

  How can I fix?

  found the solution here:

  http://forums.CrackBerry.com/BlackBerry-Z10-F254/two-Facebook-accounts-showing-hub-834878/

  Thanks to the FB developers!

• What type of eloqua email send should I use to send an email more than once to the same beneficiary?

  What type of eloqua email send should I use to send an email more than once to the same beneficiary?

  In the canvas on the box email, there is a parameter that must be checked in order to send the same e-mail several times for the same contact. Enable 'Allow emails to be retransmitted to previous winners' and you're ready.

  

• How to repeat the same line more than once in the report 10g

  How to repeat the same line more than once in the report 10g
  
  If I print the barcode more than once
  in the report;
  
  Published by: user11106555 on May 9, 2009 05:50

  OK, thought it was just a recording, then try:

  SELECT COL
    FROM TABLE,
         (SELECT 1
            FROM DUAL
           CONNECT BY ROWNUM
  

• HP 15-ab027tx: can I use discs of recovery more than once?

  I got a new HARD drive and I installed Windows 8.1 through recovery discs that I created, but I need to know that I can use these disks more than once.

  Hello

  Yes you can, there is no limit to the number of times that that they can be used.

  Kind regards

  DP - K

• Import of Lightroom - Flash player appears more than once in the source and destination

  How can I remove Flash Player from the list of destinations and sources of import?

  I recently had considerable difficulties, download Flash Player to view the video from the site, but now it appears more than once in Lightroom.

  MacBook Pro El Capitan. Lightroom CC. Thank you.

  Those are probably your Flash installation disc images.  You see them on your desktop.  If so, drag them to the trash.   If they are not on your desktop, restart your computer and may disappear from the import dialog box.

• How can I avoid that regsvr32.exe is run more than once?

  Recently my computer was slow rather. So, I opened the Task Manager and noticed at least 4 instances running regsvr32.exe. One of them is at the top of list and takes a fairly large amount of memory. I check just to see what is this that the Manager of tasks on a regular basis. It is a recent thing as in the past two or three days. I ran antivirus and maleware programs and it seems to have gotten worse since then. I just want to know if I am able to stop it and if it's a virus or what can happen on ty.

  For additional troubleshooting procedures to help you with your problem about regsvr32.exe, see article below:
  Check the file system (CFS) analysis and repair system files & DISM to fix things SFC cannot

  Do not hesitate to contact us if you need assistance.

• Error permissions if the Script is run more than once with close Diadem

  I'm in REAL trouble here and need HELP...

  I get a permissions error message when I try to run my scripts multiple times with close Diadem 2011.

  Call scriptinclude ("D:\_Calterm_Configuration_Files\Technical_Information\DIAdem_Scripts\Importing Logs_CaltermIII_Local.VBS data")

  Error is around this part of the script:

  '-------------------------------------------------------------------------------------
  ' * GetFilePaths() * * NEW feature *.
  '-------------------------------------------------------------------------------------
  Function GetFilePaths (DefaultDir, ExtFilter, MultipleDir, Msg)
  Dim i, k, f, fso, iMax, FileListPath, StartIdx, CurrFiles, list of files
  ''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
  "Promt the user select the ASCII files to load with a file dialog box
  ''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
  FileListPath = AutoActPath & "FileDlgList.asc".
  Set fso = CreateObject ("Scripting.FileSystemObject")
  StartIdx = 0
  ReDim FileList (0)
  Do "to ensure that (DlgState ="IDCancel")
  Call the FileNameGet ('ALL', ' FileRead "DefaultDir, ExtFilter, FileListPath, 1, Msg" ")
  IF (DlgState = "IDCancel") THEN Exit Do
  ''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
  'Read in the saved list or file selected in the file dialog box in FileList()

  This next line is where the ERROR occurs

  The value of f = fso. OpenTextFile (FileListPath, 1, True) ' f.ReadAll returns the content of the file
  CurrFiles = Split (vbCRLF & f.ReadAll + "\n") ' set the lines of the file into an array
  f.Close ' close the file
  iMax = UBound (CurrFiles)
  IF iMax > 0 AND Trim (CurrFiles (iMax)) = "" THEN
  iMax = iMax - 1
  ReDim Preserve CurrFiles (iMax)
  END IF
  Call BubbleSort (CurrFiles) ' sort the array of file names in alphabetical order
  ''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
  "Append current file any previous file dialog selection dialog box selections"
  ''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
  IF iMax< 1="" then="" imax="">
  ReDim Preserve FileList (k + iMax)
  FOR i = 1 TO iMax
  k = k + 1
  FileList (k) = CurrFiles (i)
  NEXT ' I
  IF MultipleDir <> TRUE, THEN Exit Do ' force 1 only dialog box, good, if all desired files are in the same folder
  Loop "until it as (DlgState ="IDCancel")
  GetFilePaths = list of files
  End Function ' GetFilePaths()

  266 error 18:18:34:
  Error in (line: column 8: 1):
  Error in (line: 140, column: 5):
  Permission denied

  I can send the script and the file I'm loading if it would help.

  OK, I played with it a little more and found that if I used global Sun (autoactpath) and then specified what that has been set.  All my problems went away.  I just added at the beginning of my first script and I have 15 different texts, I throw the box of a dialogue and now all glitches little with that I was just to the top went.  everything that I used autoactpath with has been fixed.

  Thanks for the help.

• The fan runs all the time because xinetd running more than 80% all the time.  Someone else has the same problem?

  xinetd is running at 83% or more 24 x 7 devours battery in 2 hours or less and making the fan run all the time.  I am connected to a bug report, and it turns out that it was a duplicate because someone else had the same problem.  However, I have no access to the other bug report or find anything either in the discussion forums or online.  Anyone experience this problem?

  Hello gorgonzola1111,

  I doubt that someone else has this problem because xinetd does not part of macOS. Have you installed it from a package of "ports" 3rd party?

• Filers: do run more than once.

  Hello

  I started to learn from notifiers and occurrences by reading through the forums and by looking at the examples of labview. I need to use the feature of notifiers/occurrences in my VI and I choose to use the authors of notifications.  I'll give a slight description of the feature that I put in place and the issue I'm facing. (The VI is attached to this post)

  On the front of my VI I have a button labeled Run which, once clicked is recognized by the structure of the event. This structure of the event is in a while so that I can read the event Run value change all the time loop. By clicking on the run button, I want a specific run block diagram and for this I used a notifier so that once that you click on the button to run the Notifier is sent the specific schema where wait on notification is used to receive and execute this block diagram. Now, when this specific scheme is running the value button Run is changed to accurate and after all of the block diagram is executed the value is changed to false, so the next time you click on the run button it must send a notification and rerun the desired block diagram.

  Well, the problem I have is that I am able to send notification only once, when after the scheme wanted end execution and I click the button run again my opinion is not sent and I don't know why this happens. Any help on this is greatly appreciated.

  In the attached VI, I described the skeleton of the application I'm building.

  Thank you.

  The code you want to be repeated in a framing sequence, it runs only once. In addition, you must add a way to stop the loop of your event without having to press the Cancel button. You also created 2 notifiers called RUN, I'm not sure, but it's probably something you shouldn't do. You should also look at a few examples of the use of parallel loops. Another thing, you must always release the notifier before you stop the VI.

  I have attached a small example (probably requiring some improvement).

  Ben

• Why don't the graph and the table of the DAQ Assistant, when it is run more than once

  I have a vi that collects data and the poster. When I press the run button, it collects data as expected. But, if I changed the samples or the rate and press the run button, it collects data on the previous values of the sample and rate. I have the release of the vi and run it again to perceive in the correct values of the sample and rate.

  I plugged it without the DAQ Assistant and everything works as expected. Thanks for your help. Now, just curious as to why DAQ Assistant does not work well.

  Thanks again!

• Can afford you an Eloqua contact enter the same campaign more than once at the same time?

  I have a use case where a campaign on the Web has two different webinars to choose. If contact resumes the periods it only will allow them to follow a path. Y at - it a way to allow a contact of the two options, or it will have to be broken out into two individual campaigns in order t work properly? Thanks for any help you can provide.

  Unfortunately there is no work around that would touch even in one campaign several times. Both campaigns is the only option for this case.

• How can I get a sound to play more than once using the Commons of edges?

  Hi, I'm very new to all of this; If Mylène so ask dumb stuff...

  I used successfully the communes of edge to get an audio effect to play on a timeline, but it will play only once. Anyone know how I can get it to play again at various times of relaxation?

  The code I use in creationComplete is:

  yepnope({
            load: "http://simonwidjaja.github.com/EdgeCommons/live/EdgeCommons-0.7.1.js",
            callback: function() {
  
  
  
  
                      // Load sound manifest (e.g. in creationComplete)
                      var assetsPath = "media/";
                      EC.Sound.setup(
                          [
                                {src: assetsPath + "bubbles.mp3|" + assetsPath + "bubbles.ogg", id: "bubbles"},
                          ],
                          function(){ EC.info("Sound setup finished", "DEMO"); }
                      );
  
  
  
  
                }
  });
  
  

  I then in a trigger on the timeline:

  EC.Sound.play("bubbles");
  

  As said, plays the foregoing, once... but if I place another, 'EC. Sound.Play ("Bubbles");' trigger further along the scenario, nothing happens. Similarly, if audio has already played and the lines of the timeline, the audio will not play a second time. I think I have to write in certain kinds of "unload" kind of thing, so he can play again when it hits the new trigger? Or I could just talk to Cobblers? Who knows? I certainly don't have which is why I desperately need help... Please x

  Have you tried to put the code to specific locations in the timeline?

  Here's a samlpe:

  https://www.box.com/s/3cf7sh7mtwzpvfqmynt1

• Possible to insert more than once in the same table using multi table insert?

  I used multi-table insert before insert a source separate from the tables without problem.
  
  However, when I want to insert into the same table two or more distinct lines, I encountered a problem because when I call nextval on the sequence since this is the same sequence # will try to use the same number for two inserts, which will raise a violation of PK constraint on the 2nd insert.
  
  A way around this problem?

  Another option is to create the sequence with increases of 2 or however many tables, you are targeting.
  When you then specify the. NEXTVAL, you must subtract the relative number of it, apart from the first table that you insert in to.

  Something like that;

  drop table t1;
  
  create table t1 (a number, b number);
  
  drop table t2;
  
  create table t2 (a number, b number);
  
  drop sequence test_seq
  /
  
  create sequence test_seq increment by 2 minvalue 0
  /
  
  insert all
  when 1 = 1 then
    into t1 (a, b) values (test_seq.nextval, 1)
  when 1 = 1 then
    into t2 (a, b) values (test_seq.nextval  - 1, 1)
  select 1, 1 from dual
  /