Can we have more than two keys in the recon field mappings

Similar Questions

• CMDGW_CAT:3441: ERROR: can not have more than 3 entries in the LIST RACCESSPOINT

  Hello
  I have Tuxedo 8.1 in HP - UX.
  
  
  In the section of my dmconfig that I have:
  
  ....
  .....
  
  SERVICEF LDOM = DOMLOCAL RDOM = WTC1, WTC2, WTC4 WTC3
  .....
  .....
  
  I have this error when I tried to compile with dmloadcf y dmconfig:
  
  Invalid value
  CMDGW_CAT:3441: ERROR: can not have more than 3 entries in the LIST RACCESSPOINT
  CMDGW_CAT:1546: ERROR: dmloadcf: above the errors found during the syntax check
  
  increase the value of the parameter RDOM plus 3?
  How?
  
  Thank you...

  Hello

  Syntax:

  Service LDOM = local_domain RDOM = dom1, dom2, dom3

  sets the remote domains of failover for this particular import. It is not intended to provide access to a service in several areas. What you want, it's basically what you were doing, i.e.,.

  Service LDOM = local_domain, RDOM = dom1, dom2
  Service LDOM = local_domain, RDOM = dom2, dom3
  Service LDOM = local_domain, RDOM = dom3, dom4
  Service LDOM = local_domain, RDOM = dom4, dom1

  It would provide balance between the 4 areas and always provide areas of failover, although assigned to the ON_STARTUP linking strategies, then the following is sufficient:

  Service LDOM = local_domain, RDOM = dom1
  Service LDOM = local_domain, RDOM = dom2
  Service LDOM = local_domain, RDOM = dom3
  Service LDOM = local_domain, RDOM = dom4

  As only active areas will be used and those inactive is ignored.

  Kind regards
  Todd little
  Chief Architect of Oracle Tuxedo

• Can we have more than one attachment to the activity "email with attachment.

  Guys,

  I have a condition in which the process has n number of approvers in the stream, and each approver can add attachments to the form in the variable list < document > which transports rasthaus documents.

  At the end of the process, I'm supposed to send an email with all the files attached to a help desk team.

  I know that the activity to send an e-mail with an attachment supports one attachment. y at - it a possibility or any other activity that I can use to send an email with any number of attachments?

  Hey Ashok

  The service you want is called "send with map of attachments. This service is not on the toolbar.

  If you drag on the market to define the activity type "email" in the search box, you can see the title of the foundation that there is 3 e-mail services.

  Choose send with map of attachments.

  For help on this service, see: http://help.adobe.com/en_US/livecycle/9.0/workbenchHelp/help.htm?content=000570.html

  Diana

• Supporting specification documents &gt; &gt; can we have more than one file on the details of the attachment?

  The user believes Add button is missing to add files as 'attached files' is plura and there are line numbers in the grid.  Use case is that the user wants to upload three photos not in compliance with the details of one attachment because they share the title and dates.  Also wants to print on the same page in the PDF print specification.  If added as separate titles, then print one per page.  We lose a button?  Thanks, BeckieC

  

  Hi Beckie,

  I'm afraid in the current PLM4P, we do not support function on the document to support customer demand. However, we have some improvements to 6.2 to support the document, I suggest you to submit an enhancement request and wait for the next major version if it is not urgent

  Thank you

  Jessie

• Printing documents which have more than 1 based on the 3 fields.

  HI: I have this table below. I want to print a list of the user with different combination USER ID, ID SHORT and COMPANY name. One of the USER ID I want to print below is jkova since there are two records for jkova that have different COMPANY and SHORTNAME. I hope that all the records for each USERID any data having the same values of SOCIETY and name SHORT.
  

  descr USERINCISUMMSTATUS;
  USERID         NOT NULL VARCHAR2(32)
  DEVICENAME     NULL     VARCHAR2(64)
  COMPANY        NULL     VARCHAR2(50)
  SHORTNAME      NULL     VARCHAR2(15)
  
  remedy@MDS> select USERID,COMPANY,SHORTNAME,DEVICENAME from USERINCISUMMSTATUS where USERID='jkoval';
  
  
  USERID COMPANY     SHORTNAME DEVICENAME
  ------ ----------- --------- --------------------------------
  jkova  ABC         925669382 466904984
  jkova  Exmacs      carx      587465874

  I tried the following and it does not print correctly.
  

  SELECT USERID||COMPANY||SHORTNAME, count(USERID||COMPANY||SHORTNAME) AS CNT from USERINCISUMMSTATUS where USERTYPE='E'
  group by USERID||COMPANY||SHORTNAME having count(USERID||COMPANY||SHORTNAME) > 1;

  Could someone help.
  
  Thank you
  RavI

  I know, I just wanted to give OP two options:

  yours for "different SOCIETY * and * SHORTNAME.
  mine for ' different COMPANY * or * SHORTNAME.

  SY.

• Can we have more than one system secure in Oracle Identity Manager?

  Can we have more than one system secure in Oracle Identity Manager?

  Yes we can
  Assume that we are reconciling userid and certain attributes of database and electronic mail, jobcode, city of AD.

  We will have then two trusted resource. We have a number of trusted resource based on the client system.

• can we have more than one type of topology for a rule?

  Hello

  5.6.4 can we have more than one type of topology for a rule? How insert and separate?

  Thank you.

  Try something like this, but be very careful that you understand the implications of the scope of the rule to a very large number of objects:

  $objectsbytype(/Host|) VMWVirtualMachine | VMWESXServer | VMWCluster | VMWDatastore /) If you do not need to check each type separately

  or

  the ((hôte où name like 'a%') Union (VMWVirtualMachine where name like would be %')) If you need condition the type of each object separately, and then join the results)

• How to restore items where my images are returned in the top left corner when it is open, and they have a "mesh" around them? Something to reset elements so that the image appears in the center of the box... I can't have more than 1 in. image

  How to restore items where my images are returned in the top left corner when it is open, and they have a "mesh" around them? Something to reset elements so that the image appears in the center of the box... I can't have more than 1 image open at the same time to work on. I e I can't pass a layer on the image to the other.

  OK - I got out my trusty Photoshop Elements 10 - The Missing Manual and figured it out. What I was trying to describe, it was how to make images with 'tab' images 'floating '? This has somehow reset without my knowledge. What you need to do to get your images 'Floating' back is to click on "EDIT" in your editor - at the bottom of the drop-down list hover your cursor to "GÉNÉRAL" and click on - at the bottom of the drop-down list, click in the bottom left box 'ALLOW FLOATING DOCUMENTS IN FULL EDIT MODE' - and then click OK.

  That solved my problem!

• Adding a voting drive. Can we have more than 1 drive to vote?

  Version: 10g R2
  
  In the documentation, I read the following command adds a voting drive. But, can we have more than 1 drive to vote at the same time?

  crsctl add css votedisk /dev/raw/raw4

  read this, it will help you
  Reference:-issue voting disk

  answered by Silva

  (1) why don't we not create an odd number of voting record?
  With regard to the vote of the disks are concerned, a node must be able to access exclusively more than half of the discs with the right to vote at any time. So if you want to be able to tolerate a failure of n disks to vote, you must have at least 2n + 1 configured. (n = 1 means 3 discs with voting rights). To you can configure up to 32 disks with voting rights, to the providing protection against the 15 simultaneous disk failures.
  Oracle recommends that customers use drives 3 or more with right to vote in Oracle RAC 10g Release 2. Note: For best availability, 3 files of voting should be separate physical disks. It is recommended to use an odd number as 4 drives will be more highly available than 3 disks, 3 1/2 is 1.5... rounded up to 2, 4 1/2 is 2, once we lose 2 discs, our cluster fails with 4 disks with voting rights or 3 discs with right to vote.

  (2) only the cluster checks actually for the counting of the votes before node eviction? If so, could you expain this process briefly?
  Yes. If you lose half or more than all your discs with right to vote, then nodes get evicted from the cluster, or nodes to expel from the cluster.

  (3) what is the logic behind the documentaion note which says "each node must be able to see more than half the disks with right to vote at any time"?
  The answer to the first question is will also answer this question.

  Source:-issue voting disk

• Is it possible to have more than one location in the Google Maps widget?

  Hey people,

  
  

  Lets say, you design a website for a client with multiple banks, you just want to tell them everything, no?

  I just want to know if it is possible to have more than one location in the Google Maps widget. I guess it shouldn't be that hard, but I can't understand it...

  
  

  any help would be much appreciated!

  
  

  Thank you
  

  Thom
  

  It seems that you can only use one address for this widget.

  To do this you will need create map in Google Maps with all your points, and then copy the Google embed .html into Muse.

  Example of a google map embed with several points imported into the Muse:

  (Object/Insert HTML)

  

• Can I have more than one player iCloud folder in my finder? One account for work and one for personal use.

  I want to synchronize my work to my home mac mac but don't want my work and personal files of mixture in the same iCloud drive. I want to be able to simply select the folder in the finder and access my files to work with my staff connected to iCloud services. I have 2 sets of devices. A working iPhone and a personal iPhone. My work requires that I have strictly for work purposes only to get rid of my phone personal is not an option. Is there a way to have the disc records hard icloud of two different accounts on the same mac under the same profile?

  ICloud there than one disc for each Apple ID. You can, however, create more than an Apple ID, but that creates other issues as demanding that you trade ins iCloud to access the content of the newspaper reader.

  You can create subfolders in your drive to iCloud for work and personal use. You can also purchase a subscription to more storage if you need.

  No solution to this question. Each has its compromise.

  Could you use, say, iCloud for your personal files, but use Dropbox for those work-related?

• Can I enable CC on more than two computers at the same time?

  See what adobe is always allow two computers active simultaneously?

  This is a subscription service and, while we're technically downloading the software, we don't really "own" it as it can be 'locked' if we go over our activations.  From what I've seen in many forums both in and out of Adobe, three computers seems to be the standard of what I see if I beg the question...

  What is the problem with allowing only TWO computers active being allowed to run the software at any time?

  
  

  And then I imagine that, logically, there is a problem if I wanted to use CC on a mobile device, but also my computers?

  With a music subscription service, once the music unsubscribe disappears and everything is fine - and I can access from multiple devices.  So why is Adobe being so restrictive with PS and LR (and CC in General)?  It seems rather strange that if I want to access PS/LR on a single machine, LR on the other and the first on a third, then I cannot, although there is never more than two instances of any single software used is THREE subscriptions - but it is yet another issue.

  If it can't get it fixed, maybe I should just watch Pixelmator and without having to worry about this.

  Please... give an overview.

  the only possible limitations are:

  1. you can use more than one activation of cc at any moment.  That is to say, you can use one computer at a time.  (not much of a limitation, IMO.)

  2. you must disconnect (your other connected computers) before the signature of the component snap on a 3rd, 4th etc. computer.  Once again, no downside unless you didn't have internet access to important moments and for long periods of time for the computer or computers that you need to connect.

• Can I have more than 9 favorite in 'New tab' pages of FF13 feature?

  I love the tiled window shows my favorite pages when I open a new tab in firefox 13 update. Is it possible that I can have more than the displayed both 9? Perhaps you have 12 or 15?

  Future versions of Firefox will have this feature.

  See this bug for the progress report:

  • bug 752841 - [New tab Page] do the number of adjustable tabs

  (Please, don't comment in bug reports)

  You set the number of rows and columns that appear on the subject: newtab page by changing these prefs on the about: config page via double click in Firefox 17 and later, Firefox 17 ESR supports this.

  • Browser.newtabpage.Columns (3)
  • Browser.newtabpage.Rows (3)

• can we have more than 1 object persisted in the blackberry application

  Hi all

  I am a beginner to the notion of persistent object please can I know if may be have more than on an object for an application,

  as in the concept of RMS us would create more RMS 1: an application with a different name, so in the same way that we will be able to cretae an object persistent dfferent here?

  If so,.

  I want to store in the object persistent 1

  name string

  telephoneNumber-string

  In object persistent 2 I want to store the data: -.

  long date

  selected index - int (0-male, female-1)

  Like this

  How can I achieve this?

  Please help me

  Concerning

  Adkins

  Divya Hi, I hv debug your code. You hv not initialized the field separator and it added directly.

  mainScreen.add (seven);                Here, you have found the exception.

• Is it possible to have more than one person in the role of signatory of widget in a widget e-sign?

  I'm creating a widget that will require more than one signatory if a condition is met.  This form will be accessible from the outside of our Organization.  Is it possible to create a form that has more than one person in the role of credits of the signatory widget?

  Hello RiversidePaulD,

  From now on, you can have a single (unique) signer who can esign Widgets online. If your second signatory is fixed, then counter signer is the best option. Apart from that, it is not possible to have two different esigners who continue to change. I took this as a feedback however.

  -Usman