Can what comparison be made between time capsule and Smart RG s505 wireless modem router for wifi

Similar Questions

• My computer with two hard drives and 2 starting systems has the car crash in the solid state. When I got the new drive and tried to restore from time capsule, I lost some data. How can I see what backups are on the time capsule? My laptop is also backed u

  My computer with two hard drives and 2 starting systems has the car crash in the solid state. When I got the new drive and tried to restore from time capsule, I lost some data. How can I see what backups are on the time capsule? My laptop is also saved to the time capsule. Everything is in 'Data' when I look through the Airport utility. I think that the information that I've lost are still there since I was a Capsule 3 to.

  Time Machine backup to a sparsebundle.

  The sparsebundle will use the share name of computer. So, it should be obvious who is your Macbook and that is your Macpro.

  Open the sparsebundle in Finder and keep open the subfolders until you get to the backup of each separate hard drive...

  You has of course set the exclusion in Time Machine?

  By default, Time Machine will exclude your second drive unless you have included it. Did you?

  Once you get to this level during the backup, you can do a full restore manually whenever you want.

• Apple Extreme, Time Capsule and Express on the same system, what is the best way to set it up so that all devices smoothly from one end of the House to another?

  Apple Extreme, Time Capsule and Express on the same system, what is the best way to set it up so that all devices smoothly from one end of the House to another?

  I'm going to assume that you plan to have wireless devices.

  Let's say that the Capsule is your "main" router  If this is the case, then it must be located in the House, so that the distance between the time Capsule is the same for the outside walls of the House.

  Then, on the 'left' side of the House, looking for an airport to midway between the Capsule and time of the outer wall of the House. Do the same thing the 'right' side of the House.

  In other words, each of the two airports that "extend" the wireless signal are located at equal distance from the Capsule of time... but they are in opposite ends of the House.

  If you intend to interconnect all the airports and Time Capsule using a permanent, Ethernet wired... which by far is the 'best' way to put in place a network in terms of performance and reliability... then you can locate one of the devices anywhere you want.

• I can't access the backups on Time Capsule

  A month ago I deleted from my hard drive and more. I have a MacBook Pro 2012 running macOS. I can't access the files on Time Capsule before is erased in the month of August, I can see the story in the timeline panel, but I don't have access to anything before erasure. Is it possible to access to the files before the wipe?

  A month ago I deleted from my hard drive and more.

  What hard drive you are talking about: one internal on your MacBook Pro (MBP), an external drive attached to the MBP for Time Machine backups, or internal hard drive to time Capsule?

• How can implement you not with Tim Capsule and AirPort their simulation on the iMac?

  Hello

  How can implement you not with Time Capsule and AirPort their simulation on the iMac?

  I don't know what you're asking.

  AirPort Extreme is a wireless router.

  A Time Capsule airport is an AirPort Extreme with a built-in hard drive for data storage.

  An iMac is a Mac computer.

  An iMac is not a wireless router, so he is unable to perform the functions of a wireless router.

• Time machine can finish no backup on airport time capsule

  Time machine can finish no backup on airport time capsule.

  explanation: there is no access to the/volumes/data-1/macbook diskcopiefile xxxx.sparsebundle that is used to back-up pro (error (null))

  The network failed to halfway through the backup.

  To resolve this problem, we need to know your complete network type.

  This modem do you have? Brand and model please.

  Who is your ISP? It is important for the IPv6 configuration.

  What model is the TC?

  What the configuration of TC in the network?

  How old is the MBP? If you have an ethernet port that you use it instead of wireless?

  Is this a first backup? Or were you works well for awhile and it's broken now?

• Is it safe to remove files from my macbook air now that I have set up my time capsule and backed up with time machine? My boot drive is full. How can I access files of my time capsule once they are deleted from my computer?

  Is it safe to remove files from my macbook air now that I have set up my time capsule and backed up with time machine? My boot drive is full. How can I access files of my time capsule once they are deleted from my computer?

  1 n ° put them on a regular external drive and the value of Time Machine to back up as well; the files you want to keep should be at least two disks in case one of them goes down.

  2. they will not be usable until the restoration.

  (140480)

• I have a new time capsule airport. How to limit the search for who can use the time capsule backup process?

  I have a new time capsule airport. How to limit the search for who can use the time capsule backup process?

  Set a password to disk... disk tab in the utility... and just give to those you want to use the TC...

• What is the difference between a folder and a Briefcase. How can I create a new foler in a Briefcase?

  What is the difference between a folder and a Briefcase. How can I create a new foler in a Briefcase?

  This is just n his own when I wanted to create a new folder, right-click in an empty area and the icon associated with a Briefcase appeared. I'm not familiar with this notation or the form of file storage

  Thanks for the reply

  New folder is missing.
   
   
  How to remove and restore the default context Menu items 'New' in Windows 7 and Windows 8
  http://www.SevenForums.com/tutorials/28677-new-context-menu-remove-restore-default-menu-items.html
   
  
  If still no joy, see the 'response' by Linda Yan in this thread.
  http://social.technet.Microsoft.com/forums/en-us/w7itprogeneral/thread/97de8a2a-12f2-4381-A409-a78f4ae551cf/#99395761-56de-4a76-8C2A-eab498ad735a
   
  
  Tip: When you save the text in Notepad, the default file format is .txt. Replace all files.
   
   
   
  
   

• setting up time capsule and express wired after disconnection of the airport

  I have a 2 TB Time Capsule and three 3 wired express airport throughout my house.  I know that when I added first the cable express, that I had to call apple to change some settings.  Now I can't service because they are more than a year and after a recent quick breakdown (two or three) power is the airport expresses link is more and a bunch of my settings seem to have changed on the Time Capsule.  Any help would be greatly appreciated.  Thank you

  If you think there are setting changes, then it would be better to start over.

  • First of all, you want to make a 'factory' reset on all of your base stations. This will return them to their "out-of-the-box" configuration Once finished, leave them turned off.
  • Then, we put up the Time Capsule (TC). Since it has been reset, it will broadcast a Wi - Fi unsecured network with a network name of something like: Apple network NNNNNN.
  • Use AirPort Utility on your iPhone, Mac or PC to configure the TC as a stand-alone wireless router. In other words, configure it to provide a secure WiFi network.
  • Once the TC has been configured, verify that the clients on your network can access the Internet with it.
  • If he succeeds, proceed to the next step. If this is not the case, stop and post back with your results.
  • We will now configure all of your base stations for a roaming network.
  • Power-up one of the three stations based AirPort Express.
  • Once again, you will need to use AirPort Utility to continue. The utility must now find the Express, and if all goes well, it will offer to the Express allows to extend the TC using Ethernet. It's what you want and just go through the steps automated window 'Installation '. And then on actually.
  • Do the same for the other two express base stations.

• Backup to Time Capsule and an external hard drive

  Hi all

  For several years, I use as a router Time Capsule and a backup device. Recently I found information about to associate an additional external hard drive for backup. For me it's a backup just to be sure when my Time Capsule would fail.

  I found information on the internet that it was easy to switch between the two devices. I connected the external hard drive in the time Capsule.

  But after installing the external hard drive my Time Capsule is not able to back up more!

  Please, could you help me find a solution. It would be great for me.

  Many thanks in advance,

  Diana

  I suggest that you get first back ups goes again on the Time Capsule, then we can discuss adding the USB key as a second backup source.

  For now, if please power off the power and unplug the USB of the time Capsule.

  (Gear on the dock icon)... open Mac system preferences, then open Time Machine

  Make sure that Time Machine is running

  Click Add or remove disks

  Under the backup drives, make sure that the Time Capsule disk (named 'Data', unless you have changed the name) appears

  If it isn't, then click data under available disks

  Then, click on disk use

  Close the window and now, click the 'clock' Time machine at the top of the screen

  Click on NTI Backup Now and who should get backups start on the Time Capsule

  After the return when you have confirmed that this is the case

• What is the difference between Foglight JavaEE and Foglight JMX monitoring?

  Hello

  I have a plan to monitor the 6.1.0.17 WebSphere Application Server (32 bit) and 7.0.0.5 (64-bit)

  But I understand not all Foglight for JavaEE and Foglight for JMX.

  Foglight for JavaEE or Foglight for JMX is able to monitor WebSphere?

  What is the difference between Foglight JavaEE and Foglight JMX monitoring?

  Thanks in advance

  Jeans

  Just to add to the excellent answers already posted.

  We have 2 agents which allows you to monitor Java:

  1. a JavaEE agent that runs inside the JAVA virtual machine and the information of both JMX and instrumentation.

  This Agent will give you JMX information like information of JVM (use of the bunch, son etc.), of the Application and server availability information and other information of JMX/PMI (connections pools, pools of ejb, servlets, jsp, JCA and more).

  Java EE & # 039agent also gives you information of the instrumentation - RFA count and response time, exceptional output and timeout information, distribution of queries (App/DB, component technology, server, application failure), object tracking, transaction flow and stransactional between servers and data sources) and ask traces (the ability to see the trees of the RFA at the method level to know where things are slow/stuck).

  2 JMX agent is running outside the JVM but can run on the same computer or on a remote computer, this agent requires access active, JMX. This agent gives you information JVM, availability server/applications, as well as some data as the application server published using JMX (pools of connections, JCA, EJB, servlets, etc.). The JMX agent also gives you the ability to see a list of the mbeans, get the data they expose (javaEE agent gets only a predefined list (same list that is used as a template for the application servers in the JMX agent)).

  Hope this helps

  Golan

• What is the difference between the model and its clone in VMware?

  What is the difference between the model and its clone in VMware?

  Clone

  A clone is a copy of the virtual machine.

  You can't convert back the cloned Virtual Machine.

  A Clone of a Virtual Machine can be created when the Virtual Machine is running

  Cloning can be done in two ways: Clone full and linked Clone.

  A full clone is an independent copy of a virtual machine that shares nothing with the parent virtual machine after the cloning operation. Continuous operation of a full clone is entirely separate from the parent virtual machine.

  A linked clone is a copy of a virtual machine that shares virtual disks with the virtual machine of parent on a regular basis. This preserves disk space and allows multiple virtual machines to use the same software installation.

  Cloning of a virtual machine can save time if you are deploying several similar virtual machines. You can create, configure, install the software on a single VM and then clone several times, rather than the creation and configuration of each virtual machine individually.

  Model

  A model is an original copy or a reference image of a virtual machine that can be used to create many clones.

  Models can be turned on or edited and are harder to change than usual of virtual machine.

  You can convert the model to the Virtual Machine update model base with the latest released patches and updates and to install or upgrade any software and still convert to template to use for the future deployment of Virtual Machines with the latest patches.

  Convert virtual machine model cannot be performed, when the virtual machine is running.  Only the Clone to the model can be performed when the Virtual Machine is running.

  A model offers a safer way to preserve a virtual machine configuration that you want to deploy several times.

  When you clone a virtual machine or deploy a virtual machine from a template, the cloned virtual machine resulting is independent of the virtual machine or the original model.

• What is the diffrence between HA, FT and Vmotion?

  Hi guys,.

  What is the diffrence between HA, FT and Vmotion? It would be ideal to use in which situations?

  Concerning

  Sylvie

  Take a look on VMware site to have more holding on these technologies...

  VMotion prevent planned service outages and can be used for live migrate a virtual computer through ESX hosts.

  It requires a license (included from the advanced version), vCenter, a network for VMotion, shared storage, and a "compatibility" between CPU.

  VMware HA resolve host unplanned (and VM) downtime and can be used to restart a virtual computer on other ESX hosts in there is a failure of the host or restart a virtual computer if it freezes.

  Downtime is usuall about 2-5 minutes (the time needed to start a virtual machine)

  It requires a license (included from essential Plus edition), vCenter (only to set up HA), shared storage.

  VMware FT avoid unplanned downtime host and can be used to create a standby virtual machine that will take the place of the primary, if there is a failure of the host.

  There may be several primary-secondary couple according to the power of your network and host.

  Downtime is usuall less than 1 sec

  It requires a license (included from the advanced version), vCenter, a network dedicated to FT, shared storage, a feature of the device CPU and a "compatibility" between CPU.

  See also: VMware FT

  André

• What is the difference between the CACHE and the PIN code?

  What is the difference between the CACHE and the PIN code?

  Cached, it's when you specify CACHE as part of a CREATE or ALTER an object to say Oracle when the blocks are retrieved this object these blocks should be put to the most recently used end of the LRU (least recently used) list in the buffer cache when a full table scan. Under normal circumstances, when the blocks are retrieved in memory, in that they are placed least recently used end of the LRU list. This means that the data that was most recently viewed typically will remain available in the cache buffers for awhile. Therefore, subsequent runs of the same query should find these blocks already in the buffer cache and not to recover disk again. When you use the CACHE, you say you want to put the blocks retrieved at the end of the list, which means that they will be the first blocks "aged" off the buffer cache when more space is needed.
  A few reasons to use the CACHE are:
  (1) for tables of small (only a few blocks that must be read to retrieve the entire table).
  (2) when you do a select statement returns a huge amount of data, and you do not necessarily have if wait for the query to run any time soon. In both cases, you give Oracle an opportunity to eliminate the blocks quickly to make room for more 'necessary' blocks instead of having to follow in the LRU list.

  Pinning is when you want to keep the objects in memory and to prevent them from being aged by the normal mechanism of the LRU. You use the INVALIDHTOMEH to "pin" PL/SQL code in memory, so that users are not experiencing intermittent slowdowns when code gets years out of the shared pool and must be recharged.

  The bottom line is that caching can blocks be moved quickly while pinning retains the information in memory to avoid the re-loads.