Can what tools I use to get rid of a virus?

Similar Questions

• I get the following error message "Windows - no disk Exception processing Message c0000012 parameters 75b6bf7c 4 75b6b7c 75b6b7c" can someone tell me what this means and how get rid of? Thank you!

  I get the following "Windows - no disk Exception Message c0000013 processing error message
  Parameters 75b6bf7c 4 75b6b7c 75b6b7c"can someone tell me what this means and how get rid of? Thank you!

  * UNPLUG ALL USB DEVICES AND NON-ESSENTIAL TO THE COMPUTER

  If you can, I suggest that you try the following:

  {THE PHASE 1}

  1. click on START

  2. click on "all programs".

  3. click on "Accessories".

  4. click on "system tools."

  5. click on "system restore."

  6 follow the prompts shown to restore your system to a date before the problem started. Although the system restore does not target the personal data, it is recommended that you back up all data such as music, photos and documents in case something is not bad.

  {THE PHASE 2}

  If this does not work, I could do this:

  Reach:

  http://support.dell.com/support/downloads/format.aspx?c=us&l=en&s=gen&deviceid=308&libid=1&releaseid=R45081&vercnt=10&formatcnt=0&SystemID=DIM_PNT_P3C_4100&servicetag=&os=WW1&osl=en&catid=-1&dateid=-1&typeid=-1&formatid=-1&impid=-1

  Follow the instructions to download the version (diskette) indicated secondary. This will require a floppy disk. If you don't have one available, skip this step. Unfortunantly, given the age of this system, they do not offer executable for use within Windows automatic update.

  {THE PHASE 3}

  Reach:

  http://support.dell.com/support/downloads/download.aspx?c=us&l=en&s=gen&releaseid=R42764&SystemID=DIM_PNT_P3C_4100&servicetag=&os=WW1&osl=en&deviceid=1039&devlib=0&typecnt=0&vercnt=1&catid=-1&impid=-1&formatcnt=1&libid=8&typeid=-1&dateid=-1&formatid=-1&fileid=50179

  Download the patch and install it. Then, restart your computer.

  Reach:

  http://support.dell.com/support/downloads/download.aspx?c=us&l=en&s=gen&releaseid=R53986&SystemID=DIM_PNT_P3C_4100&servicetag=&os=WW1&osl=en&deviceid=1039&devlib=0&typecnt=0&vercnt=1&catid=-1&impid=-1&formatcnt=1&libid=8&typeid=-1&dateid=-1&formatid=-1&fileid=63977

  Download the patch and install it. Then, restart your computer.

  Let us know what happens

  Thank you!

  Ryan Thieman
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Used the recovery partition to get rid of a virus. Can I upgrade to windows 10 now or do I have to install all the updates first?

  Used the recovery partition (windows 7) to get rid of a virus. Can I update immediately for windows 10 or do I install all the updates of Windows 7 first of all?

  You can update immediately:

  • How to download official Windows 10 ISO files
  • How to: upgrade previous versions of Windows using the file ISO for Windows 10

  Check that Windows 7 is active.

• Hello I am downloading from my site and my characters are messy. I type an e (taken glyphs-window), but what appears is an and the copyright sign? can someone tell me how I get rid off this

  Hello I am downloading from my site and my characters are messy. I type an e (taken glyphs-window), but what appears is an and the copyright sign? can someone tell me how I get rid off this?

  I tried a lot of things, but nothing seems to make a difference.

  In my view, they have already done for you...

  The site seems OK now. Hooray !

  But let's dig down to the serious things of this.

  If the browser needs a statement of character. Probably ' UTF-8 ', but another or an older one would be as well, as long as it's cheap, and it respects the method of characterization of the Web page.

  This statement can be provided by (1) the web server itself (its default value), (2) the htaccess file in your web root directory server, or (3) on each web page. Where there are several and contradictory statements perhaps, the older in the command above rules. But in the case where the Server and the htaccess do not provide a statement of character and your web page later on, it shouldn't be a problem.

  Your provider said that they do not have a such context in their web server, and it wasn't a htaccess file in your root folder (Muse is not create it for you). Once again: do not worry, it should always be no problem, because all your web pages provides the declaration as well (thanks to Muse). We have checked that, no doubt.

  That is where their claim is not accurate. BTW: many tips are on the Internet on the common practice in this area and they all advice that the htaccess is not the place more obvious to the declaration. The page is the best place to put it.

  W3C (the 'boss' of http and html)

  some general information:

  Choosing & applying a character encoding

  putting in a .htaccess file:

  Definition of charset in .htaccess information

  and finally, put on the page:

  Declaring character encodings in HTML

  But what is even more strange: I checked the web server of your provider to access this service online, and it seems that their server is to provide a framework (and it is UTF-8, fortunately). It's the opposite of what they have been say...

  Now I have the idea of some personal provider noticed this morning that their server wasn't working properly (maybe after a failure of server or another incident or failure), serving the pages with a wrong setting. Then maybe they quickly corrected, and not to let you know that, they tell you to put in place this htaccess file (which makes no difference, just as the declaration of your page also could not prevail in the setting of the server).

  So now, you are done with all the three statements: a parameter, a htaccess in your Web site folder and that of your server page. As long as they all say and expect the same (UTF-8) you don't have to worry about this.

  Problem solved, three times!

  PS: many accommodation providers (and I'm afraid that yours as well) tend to declaring that whatever they do is 'standard' and 'obvious'. While in many situations, it's always a little different and certainly not the standard, not to mention obvious...

• How can I get rid of a virus in quarantine and my computer?

  Original title: virus

  How can I get rid of a virus in quarantine and my computer?

  Hello

  You should check with the manufacturer of your antivirus program support, their online
  documentation and help and ask in their forums (if any).

  ---------------------------------------------------------------------------------------------------------------------

  If you need search malware here's my recommendations - they will allow you to
  scrutiny and the withdrawal without ending up with a load of spyware programs running
  resident who can cause as many questions as the malware and may be harder to detect as
  the cause.

  No one program cannot be used to detect and remove any malware. Added that often easy
  to detect malicious software often comes with a much harder to detect and remove the payload. Then
  its best to be thorough than paying the high price later now too. Check with them to one
  extreme overkill point and then run the cleaning only when you are sure that the system is clean.

  It can be made repeatedly in Mode safe - F8 tap that you start, however, you must also run
  the regular windows when you can.

  TDSSKiller.exe. - Download the desktop - so go ahead and right-click on it - RUN AS ADMIN
  It will display all the infections in the report after you run - if it will not run changed the name of
  TDSSKiller.exe to tdsskiller.com. If she finds something or not does not mean that you should not
  check with the other methods below.
  http://support.Kaspersky.com/viruses/solutions?QID=208280684

  Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone.
  (If Rootkits run UnHackMe)

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Malwarebytes - free
  http://www.Malwarebytes.org/products/malwarebytes_free

  SuperAntiSpyware Portable Scanner - free
  http://www.SUPERAntiSpyware.com/portablescanner.HTML?tag=SAS_HOMEPAGE

  Run the malware removal tool from Microsoft

  Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

  You should get this tool and its updates via Windows updates - if necessary, you can
  Download it here.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
  (Then run MRT as shown above.)

  Microsoft Malicious - 32-bit removal tool
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

  Microsoft Malicious removal tool - 64 bit
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

  also install Prevx to be sure that it is all gone.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Prevx - Home - free - small, fast, exceptional CLOUD protection, working with others
  security programs. It is a single scanner, VERY EFFICIENT, if it finds something to come back
  here or use Google to see how to remove.
  http://www.prevx.com/   <-->
  http://info.prevx.com/downloadcsi.asp?prevx=Y  <-->

  Choice of PCmag editor - Prevx-
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  Try the demo version of Hitman Pro:

  Hitman Pro is a second scanner reviews, designed to save your computer from malicious software
  (viruses, Trojans, rootkits, etc.). who infected your computer despite safe
  what you have done (such as antivirus, firewall, etc.).
  http://www.SurfRight.nl/en/hitmanpro

  --------------------------------------------------------

  If necessary here are some free online scanners to help the

  http://www.eset.com/onlinescan/

  -----------------------------------

  Original version is now replaced by the Microsoft Safety Scanner
  http://OneCare.live.com/site/en-us/default.htm

  Microsoft safety scanner
  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  ----------------------------------

  http://www.Kaspersky.com/virusscanner

  Other tests free online
  http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

  --------------------------------------------------------

  After the removal of malicious programs:

  Also follow these steps for the General corruption of cleaning and repair/replace damaged/missing
  system files.

  Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
  RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker
  (SFC.exe) program generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------------------------------

  If we find Rootkits use this thread and other suggestions. (Run UnHackMe)

  http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/a8f665f0-C793-441A-a5b9-54b7e1e7a5a4/

  ======================================

  If necessary AFTER you are sure that the machine is clean of any malware. (DO NOT USE IF)
  MALWARE IS STILL PRESENT).

  You can try a repair install or an upgrade in Place.

  You can use another DVD that aren't copy protected but you you need to own
  Product key. It must be the same version 32 or 64 BIT Vista OEM. Also the system
  machine to usually sell the cheap disk since you already own Windows. Don't forget to make a
  good backup or 3 (security in redundancy).

  On-site upgrade
  http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htm

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-happened-to-the-recovery-console

  How to perform a repair for Vista Installation
  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  =======================================

  For extreme cases:

  Norton Power Eraser - eliminates deeply embedded and difficult to remove crimeware
  This traditional antivirus analysis does not always detect. Because the Norton Power Eraser
  uses aggressive methods to detect these threats, there is a risk that it can select some
  legitimate programs for removal. You should use this tool very carefully and only after
  you have exhausted other options.
  http://us.Norton.com/support/DIY/index.jsp

  ================================

  If you are in North America, you can call 866-727-2338 for virus and spyware help
  infections. See http://www.microsoft.com/protect/support/default.mspx for more details. For
  international information, see your subsidiary local Support site.

  Microsoft support - Virus and Security Solution Center
  http://support.Microsoft.com/contactus/cu_sc_virsec_master?ws=support#TAB0

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• My computer has been infected with "Windows Vista restore" what should I do to get rid of him?

  The fake security program Window Vista restore"scans my computer and tells me I have several hard drive errors.  It has blocked access to my computers system restore and defragment utility, appeared to 'clear' all my files (like images taxes) and I get the error pop ups telling me to turn off the computer because "hard drive failures.  When I click on cancel, x or anywhere on the box, the system stops.   When I restart, the same fake program starts begins to scan my computer again.  I tried running my Trend Antivirus scan and when the scan is about 99% complete, the fake program does not scan continue.  What should I do to get rid of him?  I'm asked to pay for an upgrade of the software, but have not entered my card number.  I'm afraid that my data has been hacked... including the loss of my photo albums.  I'm currently installing updates to windows on the computer.  Will he get rid of it?

  Hello

  do you mean Windows Recovery?

  read this:

  Windows Vista Recovery is a program of analysis and optimization of fake computer that displays false information in order to scare you into believing that there is a problem with your computer. Recovery of Windows Vista is installed via Trojan horses that display fake error messages and warnings of security on the infected computer. These messages will state that there is something wrong with the hard drive of your computer, and then suggests that you download and install a program that can solve the problem. When you click on these alerts, recovery of Windows Vista will be automatically downloaded and installed on your computer.

  Once installed, Windows Vista Recovery will be configured to start automatically when you log in to Windows. Once started, several error messages appear when you try to launch programs or delete files. Windows Vista Recovery will then prompt you to scan your computer, which will then find a variety of errors, he said, he can't fix until you purchase the program. When you use the defragmentation tool called it will specify that it should run in Mode safe and show then a background in Mode Safe false who pretended to defragment your computer. As this program is a scam do not be scared by buying the program when you see its alerts.

  Follow the removal instructions, including how to "unmask" your data

  http://www.bleepingcomputer.com/virus-removal/remove-Windows-Vista-recovery

• What should I do to get rid of a "Printing cancelled win32 error: not enough memory available to process the command.

  What should I do to get rid of a "Printing cancelled win32 error: not enough memory available to process the command.

  Hi Jerome,

  ·         You receive the error when you try to print?

  If so, check to see if the following helps you.

  Run the next Fixit tool to check the issue.

  Problems printing and printing errors

  If this isn't what you are looking for then respond with more information so that we can help you best.

• How can I get rid of a virus if I can't download or remove anything?

  How can I get rid of a virus if I can't download or delete anything?

  There are a number of techniques that can be used.

  Looking for a portable antivirus or anti-malware that can be loaded on a CD/Flash drive on a system free from viruses and then physically move your infected system.  For example:

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  http://www.SUPERAntiSpyware.com/portablescanner.HTML?tag=SAS_PORTABLEFOLDER

  Restart in safe mode with network that can allow access to the removal of additional viruses on the net tools while preventing the virus to start and then interfere with your system.

  Request free assistance from the security of Microsoft Tech Support:

  http://supportservices.Microsoft.com/support/services/virus_malware_removal

  Request free assistance from the security community in malware removal Forums.

• How can I delete my documents and get rid of my thinkpad with windows 95?

  How can I delete my documents and get rid of my thinkpad with windows 95?

  If there is anything physically wrong with your computer, you can use Darik Boot and Nuke (DBAN aka) to make a scrub of the security of your HARD drive. Glance to download here.

  This will leave Nothing on the HARD drive. You can take the time to reinstall an operating system, but at the very least, the new operating system should be Win 98SE or higher.

• Can someone help me get rid of a virus that has COMPLETELY disabled on my pc which is running xp.

  OK so I started my pc which is running xp, everything was normal until my desktop picture turned blue.  Then a program called MS Removal tool began to run a program by saying that it was scanned, I closed this program and I discovered that I couldn't open some programs to try to get rid of this virus as the Task Manager, avg antivirus, malware antibytes, I can't even access on my pc or files on my pc programs some of them will not even open.  Any help please.

  Restart your PC and press F8 key several times and chose the mode safe mode with networking.

  From there try to connect on:

  http://OneCare.live.com/site/en-us/default.htm

  And run full scan of the system.

  If still the same problem, then contact Support for Microsoft Security:

  https://consumersecuritysupport.Microsoft.com/default.aspx?ProductKey=pcsafetymalware&FAQ=1&task=Diagnostics&St=1&wfxredirect=1

• Is it just me or does Photoshop CC remembers what tools I used last when I close and reopen the program?

  Hi all!

  I have years of experience using Photoshop, and I have used CC for quite a while now. Last year, I used a different computer more powerful than I have now, but I don't remember ever having this problem. It is less of a problem and more of a preference, but its still slow me down. Whenever I open it Photoshop (I only noticed this in Photoshop until now) my workspace is saved, but my toolbar doesn't remember the last tools I was using.

  For example: if I've been using the polygonal lasso tool, then close Photoshop and reopen, it is by default in the standard lasso tool.

  Does anyone know if there is a way to save what tools were used for the purpose or more often?

  Thanks in advance!

  [Moved from the living room Forum for specific forum - Mod]

  Photoshop CC 2015 still remembers the tool, I'm the last one used. This looks like a problem suddenly, and many times they can clear up by a tidal wave of preference.

  Try to reset the Photoshop preferences file:

  Manually; course may be cancelled:

  http://TV.Adobe.com/watch/the-complete-picture-with-Julieanne-Kost/how-to-reset-Photoshop-Le file-Preferences-cs6s.

  Fast; cannot be undone:

  Win: Press and hold the keys Ctrl + Alt + Shift immediately after the launch of Photoshop starting. A box will appear asking if you want to continue with the reset, select 'yes '. If you don't see this, you're not fast enough... Try again.

  Mac: Press Cmd + Opt + shift then launch Photoshop. A box will appear, asking you if you want to continue with the reset, select 'yes '.

• When I click on an item with the direct Selection tool, I used to get a little place on each limit

  When I click on an item with the direct tool, I used to get a little place on each line of bounding box that I could use to adjust the size of the object. Somehow he disappeared - how can I get that back please?

  Display > display the edges

  -OB

• How can I get rid of a virus

  I accidentally downloaded a virus. My device is frozen, cannot access the internet. The virus requires the payment of $500 to unlock the screen. How can I get rid of the virus

  There are ideas and additional links within this Council; However

  some of the problems with a 'ransomware' scam can translate by allowing a

  real attack once you leave in your phone. Otherwise, it's a bluff.

  Phony 'technical support' / 'ransomware' popups and web pages

  Most of the items I found in the deal with OS X and a few mention iOS.

  There is an article on how to deal with the issues of adware in Safari, which

  are based on the ability to boot the device with the browser, in order to

  do not keep the same web address, then you can disable the source.

  • Stop the pop-up ads and advertising on Safari - Apple Support

  The notice of an attack is usually a bluff, iOS and OS X; When you act on

  the element as they suggest, to call a phone number or click a button to allow

  In addition to access, the issue intensifies; the attacker gets access to the

  device and to any payment method available for their "healing" to the attack.

  The scam is to get people to think that the answer is the warning, but it's

  fake; acting so on him with faith is the quicksand.

  Maybe you can start the machine with the browser disabled (or extensions turned off)

  to see if you can follow through with the ideas presented in above links.

  These ideas helped others in the past, and avoidance is the best remedy.

  Good luck in this case!

• Satellite Pro M10: Of memory can what type I use?

  Of memory can what type I use in my PC Satellite Pro M10 Centrino 1.5 - PS630E-G206Z-PB

  Visit this site and you will find the right memory modules:
  Memory Toshiba - Satellite Pro M10
  http://www.orcalogic.co.UK/ASP/ProdType.asp?ProdType=7338&ft=m&St=3

  You can use the 200 pin PC2100 (266 MHz) DDR SODIMM

• Can what program I use to open the files PLX?

  Original title: PLX files

  Can what program I use to open the file in a readable format PLX?

  Hi Truman,

  I understand that you want to open the PLX files.

  Executable program written in Perl programming language; often used for Web applications that are running on a Web server. You can open them using the following application.

  Microsoft IIS with PerlIS.

  I hope this helps.