can you connect the hp TouchSmart 600 PC to LCD screen? URGENT

Similar Questions

• How to connect the HP Touchsmart 600 to a projector

  I have this problem, I can not connect my touchsmart600 to Sony projector. I have the s-video cable, but when I connect to a projector, nothing happens. I bought HDMI VGA adapter, I connect to my computer with projector and nothing shows. Please, someone help me.

  When you request support, please provide the HP model name and/or product the full number of the computer in question. In addition, please provide the full model of the Sony projector number. Without this information, we can not provide you accurate assistance.

  Most of the HP TouchSmart computers isn't any video output (VGA, DVI - D or HDMI). Some HP TouchSmart computers have a HDMI input to connect a DVD/Blu-Ray player or game console. Often the only way to connect an external display to a TouchSmart computer is using an adapter USB-to-video as the EVGA UV plus + UV39 or UV19.

• Can you connect the Sx20 Webex Connect to Callmanager without a VCS?

  We have a few autonomous sx20 who use webex connect, but would they be able to communicate with callmanager and video settings.  Is there a way to do this?

  CCM 8.6

  Well, you're right, by selecting a native of CUCM record will cut you with the service of WebEx telepresence (Callaway).  There is no easy way to accomplish what you are looking for without a VCS.  You are connected to a cloud service, which performs the detached from the internal network with CUCM calls comopletely.  Control of VCS and highway it would through a standard deployment.

  I would not recommend this, but the only way to achieve this would be to manually edit endpoint a record of CUCM and then back to WebEx TelePresence every time.  WebEx TP will allow you to re - register the same endpoint with the MAC even point several times. The problem is that of workaround does not fit.

• can you connect the SFP - 10 G - SR low-support to SFP 1000BASE-SX?

  Hello world:

  today I use the SFP + 'SFP - 10 G - SR' in Cisco Catalyst 2960 S-48TD-L connect to the SFP 1000BASE-SX to 6509 WS - X 6724-SFP module.

  the port setting is master, but they do not work, even the light don't flush. Then, I also use the SFP 1000BASE-SX to replace SFP + SFP - 10 G - SR in

  2960 S-48TD-L, then they cany working.

  I look to the top of the cisco data sheet, there is no roadmap to satament database 10G sfp + can't low support 1 G sfp. So, I want to confirm the problem.

  Otherwise, the 10 FPS + can only use for 10G SFP +; can't go down the suport 1 G SFP.

  This means: If you want to use the 10 G SFP + the other old device also need to replace.

  Thank you ~ for your help!

  Hi Marvin,.

  I found this conversation today, because I'm looking for an answer on a question similar to the question that Jerry asked, at the opening of this discussion.

  So my problem is this. In a certain place, I need two 10 GB and a connection of 1 GB on an optical cable. To cut costs, I tried with WS-C2960X-48FPD-L, but because it contains only two ports of SFP +, I tried with two WS-C2960X-24PD-L which will be connected with the battery modules.

  Then, having two WS-C2960X-24PD-L, I have 2 x 2 ports SFP + 1 GB. There are two open questions:

  1. can I put 1 GB transmitter SFP module SFP + port (that I have a connection of 1 GB at remote site)?

  2. can I use two switches to 24 ports mentioned 2960, in a way that I use one of them for the two connections of 10 GB (using ports SFP + 10 GB connection) and the second member of the battery so that we (2 available) port SFP + is used to 1 GB SFP connection (using the SFP port + as mentioned in question 1)?

  I'm not sure if your previous statement covers my questions, because it is not clear if the 1 GB SFP transceiver can be inserted in the port SFP + WS - C2960X - 24PD - L (or any other a port SFP switch +).

• Can you connect directly a Tablet wifi to your computer for the internet

  Can you connect directly a Tablet wifi to your computer for the internet

  Let me answer this way:

  Suppose you have a desktop or workstation that has a wired connection to the internet. Moreover, that this system also has a working wireless card. Another device with a pu wireless device to connect to desktop with a wireless ad-hoc connection. The desktop can be configured for connections to bridge the two and leave the system second to use "Internet connection sharing" to connect to the Internet.

  Start here:

  http://support.Microsoft.com/kb/306126

  Tom Ferguson.

• Can you connect two cable on wifi networks?

  Basically, I'm trying to build it.  It was much easier in photoshop than to the fact of installation.

  

  There are many features, some wired, some wireless.  I ran son where I can run threads, but it's a bit more difficult that I thought for a domain.

  Basically, I need to connect two wired over wifi networks.   The 2nd must share this wifi via ethernet. (I can exchange picture 2 and 3 if necessary)

  There are also two 4-port switches in the mix for the NAS in the basement and other devices connected.

  Everything works the latest firmware. All computers on the network are running 10.11.4 Mac

  Can you connect two cable on WiFi networks?

  In theory, Yes.  In practice, not if you work with image, video files or other media.

  Honestly, it's a big House of cards, and even if it does not, it will be very SLOW... Since everything will depend on a connection without wire between Imagine and Imagine 3... and wireless will be much less bandwidth of a wired connection, not to mention the much less reliable than a wired connection being.

  If unfortunately, the bottom line here is that a professional, or even a good amateur would never has something like this.

  There are some other questions to ask, but by far the most important would be... is it possible that Imagine and imagine 3A connect using a wired Ethernet cable connection?

• I can't connect the mobile phone as GPRS bluetooth modem

  MSI Wind U100 laptop (toshiba bluetooth module is built in)
  MS windows XP Professional SP3
  Toshiba bluetooth stack 6.30.01

  I can't connect the mobile phone as GPRS bluetooth modem. I tried to connect certain phones. But all the time the same problem:

  After finding mobile phone in the list of available devices, notebook coonects him. But at the same time, "coonecting COM 40 failure, try again".

  I've read about this problem in the user manual, but I am not understand, how to solve a problem.

  PS Sorry for my bad English

  I recommend you take a look at the next document if it has never worked before:
  "How to set up GPRS DUN via Custom Toshiba Bluetooth Stack Mode"
  You can find in the section "how to resources" from the following Web site:
  http://APS2.toshiba-tro.de/Bluetooth/

• Can you run the Interface of Inspection VBAI only once and then once more by a guest user?

  Can you run the Interface of Inspection VBAI only once and then once more by a guest user?

  I don't think I understand what you are trying to accomplish. You can connect a button on the front of the smart camera and trigger each acquisition. In VBAI check the triggered Acquisition under the tab trigger for the step to acquire Image (smart camera).

  Your smart camera is hooked up to a monitor? Is there something that you must do in LabVIEW that you can't do in VBAI about the step of user input?

• Have HP Pavilion dv2500, won, t turn on. When you connect the power supply blinks blue.

  Have HP Pavilion laptop dv2500, p/n kn997ua #aba, does not illuminate. When you connect the power supply blinks blue.

  Now you can take the laptop at best buy or Wal-Mart and get them to plug a power cord. This will give you an idea if you need to buy a power cord or not.

  Again, you can always buy the power supply cord and if it does not return.

  THX

• Cannot get signal when you connect the TV to HDMI port.

  * Original title: HDMI Signal

  Hello. My nam is Kieu. I have a problem and and we hope you guys can helo me. I just bought a Gateway desktop all-in-one computer and tried to connect it to the TV via the HDMI port, but I could not get signal on my TV. Help, please.
  Thank you very much

  Hi David,

  Thanks for posting your query in Microsoft Community Forum!

  According to the description of the problem, it seems that you are unable to get the signal when you connect the TV to HDMI port.

  I will certainly help you with this issue.

  Here are some steps that you can try in order to solve the problem.

  Step 1. First you need a video cable to make the physical connection. For a better image quality, you need to connect the computer to the TV using standard VGA ports or via DVI to HDMI Cable provided your TV supports these ports.

  Step 2. Open thedisplay settings' ' in your Vista computer and Activate the output to the TV screen. You can reflect the content of your computer on the TV or extend the display as a double screen control.

  Step 3 Pick up your TV remote and switch to "External inputs" in the menu. You need to change the value by default "Video 1" to a different selection which may be "HDMI 1" or "video 2" depending on how you made the connection. "

  Important: Make sure you connect the cable to the TV before turning on the computer, because sometimes it may not recognize the external display.

  You may also change the resolution of your TV screen using the display settings in your panel of control remains the image may appear distorted.

  For more information, see the article.

  Connect your computer to a TV

  http://Windows.Microsoft.com/en-us/Windows-Vista/connect-your-computer-to-a-TV

  If anything in my post is not clear or if you have any questions on Windows, feel free to let us know. It is our pleasure to be of service.

• How can you save the background image contained in a Thunderbird e-mail message

  How can you save the background image contained in a Thunderbird e-mail message

  Have you read the instructions which preceded the right click? What of their suite?

• How can you cancel the download of an update that was started by after having pressed the button "Check for Updates" in the window "On Firefox", please?

  How can you cancel the download of an update that was started by after having pressed the button "Check for Updates" in the window "On Firefox", please? If possible, please cover all platforms, Mac, Windows, Linux, although the first mentioned is what currently applies to my situation.

  Thank you.

  Such a download is usually recorded in a updates or updates folder in the program folder or the Firefox application.
  You can delete this folder to cancel the download.

  If the files have already been downloaded, then delete the files in the folder updates\0 and updates.

  • http://KB.mozillazine.org/Updates_reported_when_running_newest_version
  • http://KB.mozillazine.org/Software_Update

  Mac: /Applications/Firefox.app/updates "/path_to/Firefox.app/Updated.app"
  Linux: "/path_to/firefox/updated"
  Windows: C:\Users\<user>\AppData\Local\Mozilla\Firefox\Mozilla Firefox\updates
  

• How can you change the name of a group on messages on Iphone message?

  How can you change the name of a group on messages on Iphone message if some of the people do not use an Iphone?

  Hello

  It is not possible to change the name of the group, because he was such an iMessage feature, because there is in the Group of devices that are not registered with iMessage this be possible.

  I hope this helps!

  Jonty

• Hi, can I connect the machine to the time more than a mac?

  Hi, can I connect the machine to the time more than a mac?

  Yes. Each time backwards Machine until will settle on the Time Capsule in a separate file.

• Can you determine the model of the iPad with DK S/N * VD2?

  Can you determine the model of the iPad with DK S/N * VD2? I've upgraded to a newer iPad and need to sell the former. He reconnects with the default status, and I would go instead through the installer to get this info.

  < personal information under the direction of the host >

  Go to settings - general - about - Scroll down - must be model number

  (1241)