Can you connect to a logical unit number after you run a test with RecoverPoint SRM

Similar Questions

• How to connect to a logic unit number?

  I have an ix4 - 300 d and created a logical unit number. I installed the Lenovo storage on a Windows Server R2 2012 machine Manager and connected to the LUN, however, I don't see the S: drive in Windows Explorer.

  Anyone can send a step by step, to correctly configure the LUN and plug it on the server?

  Hello Linc0,

  You can use the native Windows initiator to mount the iSCSI disk:
  https://www.Google.com/webhp?SourceID=chrome-instant&ion=1&ESPV=2&IE=UTF-8#q=how+to+use+Windows+init...

• Can I use vSphere replication for VMs on a logical unit number that is doing table replication to DR site

  Hi guys, could not find the answer on any Docs/KBs. With the implementation of normal SRM, I know you can use a mixture of the two, while a virtual machine is not protected by the table and vR.

  I need to make a site of NEW Dr. C while maintaining the current Bay of NETAPP on protection SRM of Site B.

  Will this be an approach to support? Step 0 is required?

  0 > get my guys to storage to stop replication on LUN - XYZ table (IF ANY) on

  1 > delete virtual machines on LUN XYZ of SRM existing Protection groups.

  2 > use vSphere replication to replicate the VMs who live on the LUN - XYZ

  3 > repeat the process until all LUNS have been treated like that.

  It should work without problem. I would recommend just a change in order to:

  1 (also remove the logic of the PG unit number), 0, 2, 3

  If you want to leave the computer on the same LUN virtual then step 0 is not necessary, but recommended (see below). If want to let the replication logic unit number and can just svmotion the VM, which would work as well.

  From a data protection perspective, as long as you understand the potential complications, I recommend you actually starting with step 2. Technically, you don't want to not have the same virtual machine reproduced several times, in this case since you are in transition, and if you understand that retrieve the VM using a method will break the other, and you can not the virtual machine protection with the two (VR & ABR) in SRM, you should be ok.

  Hope it makes sense. If this is not the case, let me know.

• Logic unit number must be manually replaced by the iSCSI initiator

  I have a VM server that once restarted the logic unit number must be manually replaced by the iSCSI initiator. Does anyone have an idea how I can get this auto re - join when the server is restarted?

  EqualLogic PS4100

  Win2008 R2 64 bit server VM

  When you logged into the volume, there is a checkbox to restore the connection.  It was supposed to end upward in the Favorites tab in the MS iSCSI initiator utility.

• Move the file to the vm to a logical unit number to another logical unit number

  How can I move a vm folder in a logical unit number to another number of logical unit to a remote domain with powercli controller?

  the virtual machine is not registered in vc

  Hello, tdubb123-

  You can use the cmdlet Copy-DatastoreItem of PowerCLI, who has a "-Recurse" parameter to copy all the child elements.  For example:

  Copy-DatastoreItem -Item "vmstore:\myDatacenter0\myDatastore0\someVMFolder0\" -Destination "vmstore:\myDatacenter3\myDatastore2\" -Recurse
  

  "He uses the PSDrive" vmstore:------", which gives access to centres of data/connecting to VIServer default data warehouses.  If you go between vCenters, you can use the ' vmstores:------"PSDrive, which allows access to these objects in all VIServers to which you are connected in this particular PowerCLI session.

  Once you are satisfied with the integrity of the files after copying, you can delete the folder of elements from the original location using the standard Remove-Item cmdlet.  Enjoy.

• Determine if the logic unit number is in use

  Is there a way to determine if a logic unit number is used on a case of ESX?

  I'm cleaning up some old RDM LUN presented to on my ESX servers, and I want to confirm that they are not mapped to any virts. Is there a way of gui to do? I tried to develop a bash script to do, but the problem is somewhat difficult.

  --

  Jeff

  VCP4

  Hello.

  Any ROW that are not attached to virtual machines is available by using the Add Hardware Wizard.  Try adding a hard drive to a virtual machine and choose "Raw Device Mappings" (if not grayed out) and anything that is listed is not in use.  If Raw Device Mappings is grayed out, you can use the free RVTools to find what VM has the RDM.

  Good luck!

• passing VM of a LUN to another logic unit number

  I'm under vCenter 4.0 and ESX 4.0 U2 4

  I need to rearrange my VM to deal with the issue of the free space on the LUN level. We have a VM to run out of space problem because we did not know that we must not create a DTX200 of 18 G for a virtual machine with 1 G of memory in a 20 G logic unit number

  Our goal is to move all the VM in one of the 500 G LUN at least 20% of free space on the LUN to all the vswap and log files and instant and such.

  Here's what I'm consider that I do or have to do.

  (1) SAN admin will give me a new 500 G LUN (new_lun)

  (2) I will introduce this new_lun ESX 4 guests

  (3) then I'll have to remove these empty LUN (orig_lun) for all the ESX 4 return guests to the SAN admin. I have read several posts on the problems of removing LUNS to hosts, for example all-way-down when a logic unit number is deleted and causing all the hosts cannot see all other LUNS. any advise on this?

  4) return to the step 1 until all the data store is in one of the 500 G LUN at least 20% of space

  Now, I am using vCenter Converter to accomplish this tast. Issues related to the:

  (1) I have no intend to rename the virtual computer and to move the virtual machine to another host in the cluster, or to change its ' IP. My question is, can the vCenter converter allows to move just the virtual machine to a logic unit to another logic unit number number?

  (2) some of my vmdk need to have a different block size because they are 256 G with size 1 M block right now. This means that when they are moved, I need to create a new vmdk with a new block size (example 2) and then move the data across.

  (3) most of my virtual machines have at least 2 drives and each disc has its own logic unit number. for example, VM_A is a C (20G) drive, which is located on LUN_C and an E Drive (40G) which is on. LUN_E LUN_C and LUN_E are 2 completely separate LUN. Now, when I try to move these LUN_C and LUN_E to the new_lun (which is 500 g), vCenter converter will a vmdk to 60G or a vmdk of 20G and a 40G vmdk under the VM_A folder (if I can still call VM_A) when I use the heater vCenter?

  Thank you in advance.

  As the size of the block is set when you create the data store that you must move all virtual machines to a different data store, remove the data store to change the size of the block on and create a new one with the correct block size.

  If you have found this device or any other useful post please consider the use of buttons useful/correct to award points

• ESXi 5.5 - Direct access to the local logical unit number

  I have a 5.5 stand-alone ESXi server.

  It has 2 local SAS controllers

  Controller 1 (HP Smart Array P410): data bank single RAID 10 with two VM's local logic unit number

  Controller 2 (HP Smart Array P812): only RAID 6 LUNS nothing on it yet...

  My question is that I need one of the virtual machine to access that LUN. Is it possible to give direct access to the VM to the controller and/or the unit number logic rather than create a vmdk and massive data store?

  If it is I know Flash would not work on these data, but that really doesn't matter in this case.

  Thank you

  Kenny

  Hi Kenny, and welcome to the communities,

  There is an article dealing with your situation KB: http://kb.vmware.com/kb/1017530

  Concerning

  Tim

• What command to get console ESX 4.0 logic unit number information

  How do we get under reference information LUN from the console ESX 4.0?

  LUN id LUN unit number logic of identification name, name of the logical unit number label. The example is given below

  Example:

  LUN name: EVA_LUN10

  Label LUN: 4d0b1f3e-55a1075f-1764 - a 0017, 4770474

  ID of the LUN device: naa.600508b4000e1b8b00007000024a0000

  LUN ID: 20

  Can what command we use to get above the need for information?

  esxcfg-scsidevs - m

  Use this command.

• Can you please provide me with the part number for the screen for model #: NX. SHKAA.001?

  Can you please provide me with the part number for the screen for model #: NX. SHKAA.001 (AO1 - 131 M-C1T4)?  The first ten digits of the serial number are NXSHKAA005.

  Matt or gloss is what it looks like. Some like not brilliant but because most are a reflection. I would say that they would work as long as the resolution of the size and the backlight are the same.

• Can you run the Interface of Inspection VBAI only once and then once more by a guest user?

  Can you run the Interface of Inspection VBAI only once and then once more by a guest user?

  I don't think I understand what you are trying to accomplish. You can connect a button on the front of the smart camera and trigger each acquisition. In VBAI check the triggered Acquisition under the tab trigger for the step to acquire Image (smart camera).

  Your smart camera is hooked up to a monitor? Is there something that you must do in LabVIEW that you can't do in VBAI about the step of user input?

• can you run two separate vi in parallel

  Can you run two separate Vi in parallel? It will be considerably slower response?

  Here are some more details.

  Yes, you can them in parallel without any problem.

• Can you please provide me with the fresh Fusion Mobile APP to install and test script document?

  Can you please provide me with the document merging Mobile APP cost installation nd test script?

  You should ask this on the forum of merger App.

  Their application is on the public folder store before you can from there:

  https://iTunes.Apple.com/us/app/Oracle-Fusion-expenses/id516172076?Mt=8

• Hello, I have version Adobe Acrobat 11. I have complete documents and send them to customers. However, when customers open the documents on their side, they are empty. The filled information are missing. Can you please help me with this problem?

  Hello, I have version Adobe Acrobat 11. I have complete documents and send them to customers. However, when customers open the documents on their side, they are empty. The filled information are missing. Can you please help me with this problem?

  Why are publish you again? You must first answer the question I ask in your original thread.

• When you add a logical unit number to a an ASM diskgroup, made any start to process internally

  Version: 10.2, 11.2 on Unix/Linux platforms

  When you add a number logic unit to an ASM diskgroup, done any what beginning of process internally?

  Hello;

  I think that oracle ASM can start a process to restore balance after the addition of a Lun.

  http://docs.Oracle.com/CD/E11882_01/server.112/e18951/asmdiskgrps.htm

  Best regards

  mseberg