Can you set a restore point from the system on a disk?

Can you put a "System Restore" point on a disc? a disc re writable DVD, for example.

To make it clearer:

I want to do a restore point for my "C:" drive, but I want it on an external drive as a drive re writable DVD that can be put in the drive "D:" or, Alternatively, a flash drive.

Is this possible?

Any help is appreciated thanks :)

A restore of the system (System Volume Information) file must be on the disk/partition that it protects. Each drive/partition will have its own System Volume Information folder for the recovery of the partition/drive specific. It's the way is designed the o/s, so not impossible to return c to another drive.

Sorry, but that's the way it works and cannot be changed.

Good luck!

Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

Tags: Windows

Similar Questions

  • How can I set a few seconds from the beach to the specific level of db?

    Hi all, I'm new to this software,

    I want to know how can I put a few seconds from the beach to the specific level of db?

    For example, I just want the maximum dB higher and the low dB to be only 3.

    the sound is more concentrated.

    How can I do?

    audition.png

    Ah, you mean compression. There are several tools in hearing that, and one to use depends on the source material. If it is spoken word, then you can use dynamic processing tool (the original), the single band compressor or, possibly, the leveller speech volume to achieve this goal. If it's music, then the multiband compressor is rather sweet.

    But with each of them, there is something important, you should firstly to your track, and it is to normalize it to 0 dB using Effects > Amplitude and Compression > Normalize. You should do this because all compressor settings are associated with a full range signal (i.e., 0 dB) to treat. If you do not do this, none of the controls will make sense. On your screen that you've expanded the display to make it much larger than it should be, then you might want to get back to normal, otherwise you will not see clearly what is happening. Hearing can artificially display any amplitude of the signal at all, due to floating-point processing system internal use, but in the real world, the audio device cannot handle more than 0 dB, please make sure that the signals exceed this.

  • Can you play a clip cut from the preview window

    Using 11 elements. When you have trimmed a clip in the preview window, i.e. define the "in" and "on" points, is it possible to play this clip carved into the window to see what you've accomplished? I know that you can drag the slider to the "in" point, but is there no way to play just any little to start?

    Now, when we load a Clip in the Source monitor Panel by double-clicking on that Clip to open the Source monitor, and then sets the Points In & Out, the Source monitor will always play the full Clip. The Points In & Out will be used only, when doing drag that element from the Source monitor Panel to the timeline. There, only the material, between the Points In & Out will be used and displayed.

    Hope that helps and good luck,

    Hunt

  • Cannot restore to a restore point from the previous month.

    original title: my system restore won't let me restore to the previous month, the radio button works, but the habit of restoration

    my windows XP THAT behaves strangely and I tried to use the system restore which has worked well in the past, but now he's depressed the option button but nothing happens

    Roy

    Hello

    1. are you able to restore the computer to other points of restoration?

    2. you receive an error message when you try to perform the system restore?

    If you are not able to restore the computer to any pint of previous restoration then you can check the steps in the link below to fix the problem.

    Steps of troubleshooting for problems when you try to use the System Restore tool in Windows XP

    http://support.Microsoft.com/kb/302796

  • How can I remove all restore points except the recent in windows 7 Professional because my space is get wasted because of it!

    I use Windows 7 Professional 64-Bit edition and the space is getting lost because it creates many restore points, and they can be useful every hour. If I want to keep most recent restore only point and I didn't want any. How can I do this?

    I use Windows 7 Professional 64-Bit edition and the space is getting lost because it creates many restore points, and they can be useful every hour. If I want to keep most recent restore only point and I didn't want any. How can I do this?

    Kristan response is good for cleaning.

    Now to make sure that the problem does not happen:

    1. Click Start, right-click computer and click Properties
    2. click on the link to the system protection in the left pane
    3. in the System Protection options, select a drive letter, and then click Configure
    4. under disk space drag on a number you can live with (I recommend at least 10% of your total).
    5. click on OK, OK

    (You can also delete all this screen system restore points).
    VP Tech Services

  • XP hang on to the restoration of the system during installation error: no changes have been made to your computer to choose another restore point restart the system restore

    Original title: XP hang up to the restoration of the system during the installation

    During the configuration of the system in the process of getting XP to hung up on the screen of the system restore

    The message says:
    No changes have been made to your computer
    To choose another restore point, restart System Restore
    To restart System Restore, click Home
    The jury of the mouse and the button doesn't work so I can't click Home tab
    Help

    Hello

    Why you try to run the system restore?

    Step 1: Check if you are able to complete the restore of the system in safe mode.

    Step 2: Also, look for error messages in the event viewer. If you find error messages after return the exact error message so that we can help you better.

    Reference:
    Using the event viewer
    http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/snap_event_viewer.mspx?mfr=true

    Understanding of event viewer
    http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/event_overview_01.mspx?mfr=true

    Procedure to view and manage event logs in Event Viewer in Windows XP
    http://support.Microsoft.com/kb/308427

    For more information, please see the following article.

    Steps of troubleshooting for problems when you try to use the System Restore tool in Windows XP

    http://support.Microsoft.com/kb/302796

  • Can you take screenshot without permission from the end-user? Help, please!

    Hello

    I recently submitted an approved application that is available in the app world. Screenshots takes in the game to make animations faster. The question is, in order to take screenshots, you must use a secure api and not the end-user give "permission" for the app to 'save '. End users are reluctant to 'accept' because they think private information are used, etc...

    Question: is there a way to make a capture of screen-app without the user 'approve' record? OR should I just, but a little warning at the beginning saying... "the following approval is needed to make the application faster, but no private info is obtained, etc."

    Thanks for your help and time!

    Unless they received him in their default permissions, you need to ask.

  • Cannot set the restore point with the error "The Volume Shadow Copy service used by the system restore does not work."

    Cannot set the restore point with the error "The Volume Shadow Copy service used by the system restore does not work."  How can this be repaired?

    Hi rebick,.

    Try the troubleshooting steps presented by spirit X in this thread.

    Dena
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • set a restore point date in the past on Windows Vista

    When I went to do a system restore it have NO restore points saved. I created one, but it only allowed me to create this point to restore to the current date. He asked me to name the restore point and said 'date and time will be added automatically. It defeats the purpose! I'm having the issue now. I need to restore it once already. Windows XP makes it easy. Vista, not so easy. To be precise, I want to create a restore point that has dated June 1, 2010. HOW DO I DO THAT?

    You can't do that.  You cannot create a restore point in the past.  If there is just no saved restore points don't then that is pretty much the end of the line, you won't be able to restore the system.  I recommend to close and restart the computer, be sure that you are in the right place to restore the system, rather than to the place where you create restore points. In Vista and Windows 7 both actions (create a point and restore to a point) are now in different places.  If you are not sure, click on the start ORB, then type system restore in the box to access the System Restore tool.

    "whp_3" wrote in the new message: * e-mail address is removed from the privacy... *

    When I went to do a system restore it have NO restore points saved. I created one, but it only allowed me to create this point to restore to the current date. He asked me to name the restore point and said 'date and time will be added automatically. It defeats the purpose! I'm having the issue now. I need to restore it once already. Windows XP makes it easy. Vista, not so easy. To be precise, I want to create a restore point that has dated June 1, 2010. HOW DO I DO THAT?

  • I just bought a new air of IPad.  It came with IOS 9.1 and I can't restore it from the cloud until I have upgrade to 9.2.1 How can I do this since I can't access my settings?

    I just bought a new air of IPad.  It came with IOS 9.1 and I can't restore it from the cloud until I have upgrade to 9.2.1 How can I do this since I can't access my settings until the IPad is set up?

    Set up as a new device, the Update 9.2.1 the restore to original settings and then load the backup.

    (139893)

  • Outlook Express accidentally deleted data form. How can I restore it from the Recycle Bin?

    As I said I was moving an e-mail on file to clarify that I keep on many topics.  When an opportunity moving fuction outlook express installs all my local folder to the trash.  a when I try to use the import feature in outlook, I don't see the trash to shoot again in outlook or send to outlook?  I'm not the best person with a p/c, but don't use it assign to all my data.  I don't like the paper.

    I went to Microsoft support and the message I got was to call the cemmererical support team?

    Thank you

    original title: how to restore my data express form in outlook that was placed in the trash, I moved an email in a folder and all other data files were sent to the Recycle Bin

    1. Please do not use Outlook as a shortcut to Outlook Express. They are two completely different programs.
    2. Bak files, you see in the trash is moved when you attemptrd to move messages, i.e. an automatic backup that occurs when the compaction of your records. They were probably there already.
     
    If you are moving messages, first examine all records to ensure that they don't end up in the right folder, or becomes one subfolder of another. If this is not the case, read on.
     
    *****************************************
     
     
    Two reasons the most common for what you describe is disruption of the compacting process, (never touch anything until it's finished), or bloated folders. More about that below.
     
    Why OE insists on compacting folders when I close it? :
    http://www.insideoe.com/FAQs/why.htm#compact
     
    Why mail disappears:
    http://www.insideoe.com/problems/bugs.htm#mailgone
     
    Recovery methods:
     
    If you are running XP/SP3, then you should have a backup of your dbx files in the Recycle Bin (or possibly the message store), copied as bak files.
     
    To restore a folder bak on the message store folder, first find the location of the message store.
     
    Tools | Options | Maintenance | Store folder will reveal the location of your Outlook Express files. Note the location and navigate on it in Explorer Windows or, copy and paste in start | Run.
     
    In Windows XP, the .dbx files are by default marked as hidden. To view these files in the Solution Explorer, you must enable Show hidden files and folders under start | Control Panel | Folder options | View.
     
    Close OE and in Windows Explorer, click on the dbx to the file missing or empty file, then drag it to the desktop. It can be deleted later once you have successfully restored the bak file. Minimize the message store.
     
    Open OE and, if the folder is missing, create a folder with the * exact * same name as the bak file you want to restore but without the .bak. For example: If the file is Saved.bak, the new folder should be named saved. Open the new folder, and then close OE. If the folder is there, but just empty, continue to the next step.
     
    First of all, check if there is a bak file already in the message. If there is, and you have removed the dbx file, go ahead and rename it in dbx.
     
    If it is not already in the message, open the trash and do a right-click on the file bak for the folder in question and click on restore. Open the message store up and replace the .bak by .dbx file extension. Close the message store and open OE. Messages must be in the folder.
     
    If messages are restored successfully, you can go ahead and delete the old dbx file that you moved to the desktop.
     

    If you have not then bak copies of your dbx files in the Recycle Bin:
     
    DBXpress run in extract disc Mode is the best chance to recover messages:
    http://www.oehelp.com/DBXpress/default.aspx
     
    And see:

    http://www.oehelp.com/OETips.aspx#4
     
    A general warning to help avoid this in the future:
     
    Do not archive mail in default OE folders. They finally are damaged. Create your own folders defined by the user for mail storage and move your mail to them. Empty the deleted items folder regularly. Keep user created folders under 300 MB, and also empty as is possible to default folders.
     
    Disable analysis in your e-mail anti-virus program. It is a redundant layer of protection that devours the CPUs, slows down sending and receiving and causes a multitude of problems such as time-outs, account setting changes and has even been responsible for the loss of messages. Your up-to-date A / V program will continue to protect you sufficiently. For more information, see:
    http://www.oehelp.com/OETips.aspx#3 
     
    And backup often.
     
    Outlook Express Quick Backup (OEQB Freeware)
    http://www.oehelp.com/OEBackup/default.aspx  
  • System Restore cannot create restore, point because the "shadow copy provider had an unexpected error." What can I do?

    Have a Dell Inspiron 1545 with Vista.  System Restore cannot create restore, point because the "shadow copy provider had an unexpected error."   What can I do?

    Hi JamesParwulski,

    Method 1
    I suggest you to scan SFC.

    How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7.
    http://support.Microsoft.com/kb/929833

    Method 2
    I suggest you perform a checkdisk.

    Check your hard drive for errors
    http://Windows.Microsoft.com/en-us/Windows-Vista/check-your-hard-disk-for-errors

  • Cannot restore files from the point has up on toshiba vista 32

    I backed up my files on DVD. I did a complete reinstall of the computer. Now when I try to restore files from the backup of the file. It won't allow me. I tried to restore, in ways that shows on my computer. I managed on the base to get the files on my computer, but not the files.
    Help, please

    Hello h20sdavid ·         Are you able to browse the files that are created in the backup? ·         Requires external drive that you are installing the software and/or before pilots to use and you have installed them after reinstalling Vista? ·         What is the error message you get when you try to restore the backup? You can try to change the drive letter for your external hard drive and check if you are able to restore the backup. 1. open computer management by clicking the Start button, click on the Control Panel, clicking system and Maintenance, clicking Administrative Tools, and then double-click computer management.  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation. 2. in the Navigation pane, click Disk Management. 3. right click on the partition or drive that you want to change and then click on change drive letter and paths. 4. to change a drive letter, click on edit, click on assign the following drive letter, click the letter you want to use and then click OK. Thank you
    Irfan H, Engineer Support Microsoft Answers. Visit our Microsoft answers feedback Forum and let us know what you think.

  • Registry files have been deleted via a Norton 360 3.0 registry clean up - can't get an ip address from the router

    I'm running Vista Ultimate, -connection (Ethernet) with Verizon FIOS I ran a Norton registry clean and foolishly trust what he says to remove.

    At first, all of my USB cards have been screwed up (noted in the Device Manager with exclamation next to each one points)
    I did a system restore and that corrects this problem, but now I'm having a problem with my network card.
    , All diagnostic tests, etc. show that the material is very good. My router is also fine the problem is that windows can't get an IP address from the router and then assigns his own
    (a # 169 instead of a # 192)
    In the network connection properties, it says that the device is functioning correctly, and the driver is up-to-date.
    'Connection speed' tab: a window of diagnosstics is: I ran testto test adapters connect to connect to the network.
    Results: connection Test
    Test details:

    I have "this card is configured to obtain an IP address automatically. No DHCP server is present on the network. Windows selected an IP address by using the alternative private IP addressing. »

    X "Ping 0.0.0.0 Gateway: failure.
    !  "No DNS server is available for this connection.
    ! "No WINS server is available for this computer.
    X "Ping 0.0.0.0 network: failure.
    ------------------- -------------------------------------------------------------------------------------------------------------
    In this same window of diagnostics under the "LinksTab".
    Link current test status: (what is determine the current connection speed of the adapter and link partner)
    Results:
    ! The adapter is configured to negotiate the speed with the link partner, but 1000 Mbps was chosen as one of the possible speeds.

    The best link options-results of the speed test:
    ! Could not detect way reliable speed and duplex settings. Possible speed/duplex settings are 100 Mbps Full Duplex and Half Duplex 100.
    (Note that these link tests are online and I can't online)

    Also in the Diagnostics window-under the 'Cable' link cable - past-polarity is normal.
    Depending on the tab is the Hardware tab
    Hardware diagnostics check for I/O conflicts...
    Results: all the tests:
    EEPROM test
    FIFO test
    Test register
    Interruption of the tests
    Loopback test

    I also went in the prompt type in IPCONFIG... c which shows:
    Ethernet connection to the Local network card:
    ConnectionSpecific DNS suffix: (it's completely empty here)
    Link-local IPv6 address: fe80::bda9:951 d: 619f:a0dc 9%
    Autoconfiguration IPv4 address: 169.254.160.220
    Subnet mask: 255.255.0.0
    Default Gateway: 0.0.0.0

    I also have a sort of ping command here-cant remember the command, but the results were in the CBS... I didn't know how to reach. He however escape from something on the registry files.

    I went throughD-Link Tech router (router) support is good, Fios Tech support everything set up right, - Norton support(Norton denies that the files were not to be touched-although their report shows these registry files were deleted)-Dell Tech support because my warranty missed 3 weeks ago - although I still have the "your Tech Support team until 2013 - which is valid only if you have a hardware warranty-made no sense sold me the car without. the engine - directed the FTC to bring a complaint about it - after I get this fixed number.

    I hope someone can help... by the way I get perfectly in line with my laptop - I know this isn't my router. I'm sure it's due to some registry files being moved-(j'ai eu deles de messages d'erreur indiquant que les fichiers de Registre ont été endommagées ou manquantes) what do I do now? No system restore to restore this part of the register - I also installed the drivers from the dell drivers and Utilities disc - but maybe I've done that correctly? I put the disc - extract files-(he says they have been unpacked) was a new step for me to do after that? Help, please!
    Thank you!

    Hello
     
    We recommend that you install the router (see its manual) and the pilot of NIC once more and check the difference. In the first post, you mentioned that you decompressed or extracted files. Once the files are extracted, you will be asked to install the driver. However if you do not receive any prompts for the driver, then you will need to locate the destination folder where the files are checked to find the configuration file.

    Open the destination folder where the files are extracted and run the Setup file to complete the installation.
     
    To download and install the latest network card driver, visit the site Web of the manufacturer of the device or system.
     
     
    I hope this helps.
    Kind regards
    Syed
    Answers from Microsoft supports the engineer.
  • A Virus infect my computer from the system restore?

    My computer has been infected recently by (I think) a kind of malware that would be redirecting My search Google results (with a warning of Google chrome that the site had a low signature) and remove Windows Defender. I tried many possible solutions on the internet, but none of them worked. In the end, I decided to do a system restore to about two days before, he started, and my computer seems to work very well.

    After the restoration of the system, I installed AVG Antivirus (paid version / pro) and did a full scan of the computer. I think he deleted something like that harmful things we found on my computer.
    Now, three days after the system restore, I've read a few articles and questions on the internet that says a system restore does not remove a virus and that she could hide in the system restore files. I don't know if this is related, but some sites will not load for me (like 'wiiublog' and 'malwarebytes' Web sites), and when I check on another site (like 'downforeveryoneorjustme'), he says that the Web sites are on the rise. In addition, some Web sites load with just the words and links, but no images.
    The virus infect my computer in system restore files? It still does damage to my computer?
    If so, is there something I need to check my files system restore (I read that you need to turn off and do another scan, but I don't want to do anything without first aid)?
    I am running Windows Vista Home Premium Service Pack 2.
    I also Iobit Advanced Systemcare running.

    On Wednesday, May 9, 2012 23:09:41 + 0000, bt2004 wrote:

    My computer has been infected recently by (I think) a kind of malware that would redirect my Google search results (with a caveat
    Google chrome that the site had a low signature) and remove Windows Defender. I tried many possible solutions on the internet, but none of them worked. In the end, I decided to do a system restore to about two days before, he started, and my computer seems to work very well.

    If this is the case, no matter what your problem was, it was probably not
    malware. A system restore is rarely effective in eliminating
    malware.

    After the restoration of the system, I installed AVG Antivirus (paid version / pro) and did a full scan of the computer. I think he deleted something like that harmful things we found on my computer.

    In my opinion, AVG, who was one of the best anti-virus programs
    is no longer. There are several better choices:

    For an anti-virus program, I recommend eSet NOD32 or Kaspersky, if you
    are willing to pay for it. If you want a free anti-virus, I recommend
    (do not run more than one antivirus program) one of the following
    three:
     
    Avira AntiVir
    Avast
    Microsoft Security Essentials
     
    You also need anti-spyware software (even if you run a program such as)
    Microsoft Security Essentials, with integrated anti-spyware capability
    It). I recommend that you download and install MalwareBytes (freeware)
    AntiMalware

    Now, three days after the system restore, I've read a few articles and questions on the internet that says a system restore does not remove a virus and that she could hide in the system restore files.

    An infection in a restore point is completely harmless, unless you
    restore from this restore point.
    The only way to remove the virus is to turn off System Restore, then again, but who's going to delete all the your restore points, not just the one (s) infected. Alternatively, you can just wait for the points that are infected at the end of the chain - a maximum of 90 days of fall.
    My preference is to wait 90 days.

    Ken Blake, Microsoft MVP

Maybe you are looking for

  • guide the downloadable pdf user for my new ipod touch 128 gig

    I go to the hospital and thought it would be nice to have a downloadable PDF? file or users manual for my new 128 GB IPOD Touch. Would be nice to print it and I could read inbetween the misery. I have an IPOD classic 120 GB that was easy to learn, bu

  • Reset password BIOS of Pavillion G6

    Turn off the system code forgotten BIOS password on a laptop in Pavilion g6 series: 59178959 Any help would be really appreciated, I don't want to dismantle this baby!

  • System Restore will not initialize.

    any restore point. The error report suggests updated driver, when I try this, put to update says my driver is the last, and my device mgr tells me that this driver works well.I also lost many of the icons on my desktop, only white rectangles affected

  • ICCID of SIM card number?

    I use the SIMCardInfo class to get the iccid number but every time that I m install my application on the device. I m get java.lang.NoClassDefFoundError... Here's the code... try {}GPRSInfo.imeiToString (SIMCardInfo.getICCID ());} catch (Exception e)

  • RMS security

    Hi all I need help with the security of RMS data. I created an application and store the necessary data in RMS. I am using following code RecordStore recStore = RecordStore.openRecordStore (_databaseName, true); I want to know that weather data store