Can you turn off your computer during defragmantation?
can you turn off your computer during defragmantation?
It is possible and it will stop the defragnment progress and it is recommended that let it complete defragnment, and then click shut down or stop, then stop your PC and in this case, you must run it again if you want to run again. Tags: Windows which is updated when you turn off your computer I got a problem with the connection to the internet and also using IE9 when I could. I solved my problem of the internet first by disabling my FIOS router wireless can will turn off PC and when starting, I first turn on my computer desktop and then put on my FIOS wireless router after waiting for about 20 seconds. IE9 still has problems of since I installed Firefox and it works fine. When I had problems with getting Internet from my office, I was able to access the internet through my laptop using the same wireless router FIOS. I know that I was going through the FIOS wireless router because I could see the correct SSID number. So my question is what happens when off their workstation (which is updated). My desktop is Windows Vista Home Premium and using a wireless router FIOS I know is not (FIOS router) at the origin of the problem. When you stop your desktop computer, how could anything updated? This is the stop. Greetings, I installed updates in my Windows 8.1 partition. Then he asked me to restart the computer, and the message "we could not finish updates, exchange loss, do not turn off your computer" appeared and was on-screen for hours. I thought to reinstall bootcamp but I have software in the Windows partition that cannot be recovered. I read that one of them starts Windows in 'Safe' Mode, but this is not possible. I use a MacBook Pro (retina, 13 inches, early 2015) OS X 10.10.5 How can I fix this without wiping the Windows partition and lose my software? Thank you! Have you created a Windows system restore point before the upgrade? "Preparation set up Windows. Do not turn off your computer"can't NOT GET PAST! I have windows 7, and once everything was loaded, she wanted to make a few updates now it is stuck on "preparing to set up Windows. Do not turn off your computer. Help! Hi Gronfors, Try to start the computer in safe mode do a system restore and check if it works very well. To start in safe mode follow the link given below. Start your computer in safe mode http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode If you are able to boot to the desktop in mode safe mode try Method 1 if one does not work follow method 2. Method 1: Navigate to the specified location and delete the files, and then try to boot into normal mode c:\windows\winsxs\reboot. XML c:\windows\winsxs\pending. XML Once you boot to normal mode try to install the updates one by one and check if Windows update terminates the process. Method 2: If the above given step does not work try it to perform a restore of the system in safe mode and check if that helps. Follow the steps below. You can perform a restore of the system on the computer to restore the previous settings again. 1. Click Start, type system restore in the search box, and then click System Restore in the list programs. If you are prompted for an administrator password or a confirmation, type your password or click on continue. 2. in the System Restore dialog box, click on choose a different restore point and then click Next. 3. in the list of restore points, click a restore point created before you started having the problem, and then click Next. 4. click on finish. Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed. For more information follow the link below. System Restore: frequently asked questions http://Windows.Microsoft.com/en-us/Windows7/system-restore-frequently-asked-questions Once the system restore try to boot to the desktop in normal mode and check if updates work fine. Try to install the updates one at a time. Hope this information is useful. Amrita M Microsoft Answers Support Engineer I got an error message in step 2 of configuring updates - "updates were not correctly configured. Returning from changes' anyone can help solve this problem? Error: Failed to setup of the Windows updates. Restoration of the changes. Do not turn off your computer when you try to install Windows updates How can I get this 'it is safe to turn off your computer. I want to do this "it is safe to turn off your computer" message after selecting the closing down of the start menu answer soon... I know it's simple, but I forgot it help me with this Hi Caran, Unfortunately, the functionality is not there in Windows Vista. However, this feature was there in the previous version of the Windows operating system. You can see the Microsoft article for more information on shutting down the computer: Demo: Smart ways to turn off your computer http://Windows.Microsoft.com/en-us/Windows-Vista/demo-smart-ways-to-turn-off-your-computer I hope this helps. I'm in a loop, message "configure update: stage 3 3-0% complete.". Do not turn off your computer. » MY HP (VISTA) computer is locked in a loop. It keeps on rebooting after the following windows message appears: ' updated configuration: stage 3 3-0% complete. ". Do not turn off your computer. "It has been in the loop for 3 days. ANY IDEAS ON HOW TO GET IT FOR FREE. I tried most of the things that I can think of. The update is not installed successfully, you receive a message, and the computer restarts when you try to install an update in Windows Vista and Windows 7 Obviously you can not run the troubleshooter, read the article and go to method 2, etc. Method 2: Use the system restore feature Note You must be logged to Windows with an administrator account to complete this method. If it is a computer that is part of a network at work, you should ask the system administrator for help. For more information about how to connect to Windows as an administrator, visit: http://windows.microsoft.com/en-US/windows7/How-do-I-log-on-as-an-administrator Note If your computer is not configured to start from a CD or a DVD, or if Windows was preinstalled on your computer without the CD or DVD, see the documentation that came with the computer for instruction about how to continue, or go to method 2. When you start your computer by using the Windows installation disc, you can run recovery system at boot options. To do this, follow these steps: Windows startup : Select a restore point: The restore point should be a date that precedes the first time you encountered the error. To select a date, use the option to choose a different restore point , and then click Next. Note To avoid this problem in the future, see the steps in the "More information" section If the error persists, try Method 2. Method 3: Use the functionality in Place Upgrade
Performing one set to update restores the current installation of Windows to the version of the installation DVD. It also requires the installation of all the updates that are not included on the installation DVD. If your computer came with Windows pre-installed, review the documentation for your computer for instructions on how to make a place in upgarde. Otherwise, follow these steps: Note: It is strongly recommended that you back up all your personal files. For more information about how to back up your files, please visit: http://windows.microsoft.com/en-US/windows7/Back-up-your-files
Windows update failure "Configuring updates: stage 3 3-0% complete.» Do not turn off your computer. I try just turn on my computer, and I get a "Configuring updates: stage 3 3-0% complete.» Do not turn off your computer"let it sit and continues just to treat then turn off and back on - only to endlessly repeat the problem. I can't do anything else that the menu hep access by pressing the F2 key, but I can go anywhere with this option or the other. Thank you for your help. 3Ran Hello 3Ran Michael Murphy has provided these steps already; I'll just say it in a different way. Because you can't go to your office, I suggest that you start your computer in safe MODE. Next to normal mode, it is a different way to connect to your computer and makes a few changes when the problem. HOW TO START YOUR COMPUTER IN SAFE MODE Connect to your computer using an account with administrator privileges. David O Error message: "Preparation set up windows, do not turn off your computer" when to stop the system. Original title: closure of the problem Almost everytime I turn off my laptop, I get the message ' Preparation set up windows, do not turn off your computer . Then it takes forever to finally stop. Suggestions for this problem?. Hi ArthurCosford, This screen appears when you have pending Windows updates must be installed on the system or when you installed the Windows updates on the system. Step 1: You can check the windows updates history to discover updates recently and failed to install. For more information, you can consult the following article: See the Windows updates are installed Step 2: If there are updates failed, then try to download and install the stand-alone package with updates from the Microsoft Download Center. a. to download updates from the Microsoft Download Center b. Enter the item number in the field search and download the same. c. double-click on the downloaded file. d. click on run and follow the wizard to install it. Hope this information is useful. My computer said there has been updates to install yesterday evening, so I clicked on the stop icon to update. This morning when I turned it, it says "configuration updated: step 1 of 3-0% complete." Do not turn off your computer"but does nothing. My computer said there has been updates to install yesterday evening, so I clicked on the stop icon to update. This morning when I turned it, it says "configuration updated: step 1 of 3-0% complete." Do not turn off your computer"but does nothing. Hey 1st thing to try is a restoration of the system in safe mode http://www.windowsvistauserguide.com/system_restore.htm Windows Vista Using the F8 method: If that does not read this information the link below is how to download and get a vista disk startup repair, which you can start from the http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/ Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below http://www.bleepingcomputer.com/tutorials/tutorial148.html to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu Change boot order it do dvd drive 1st in the boot order If that does not fix it try repost in the forum update windows for your updates problem http://social.answers.Microsoft.com/forums/en-us/vistawu/threads Walter, the time zone traveller Original title: Update Configuration Whenever I boot, I get the following: all the configuring updates step 3 of 3 15%; do not turn off your computer. He never finished the updates. I can get by launching start-up repail and restoration, but I have to do this everytime I turn on the computer. Adding to the suggestion of Azeez, you too, try the following. Get the message: do not unplug or turn off your computer-install updates 1 of 10 Original title: closing For the past 10 times, I stopped, the message "don't disconnect or turn off your computer-install updates 1 of 10" or other similar term. What is c? Hi bloviater, 1. the updates you are trying to install? If you are unable to enter the Normal Mode, then try Safe Mode system restore. Method 1: Step 1: You can try to start in safe mode and check if the problem occurs. Check out the link for more information on starting your computer in SafeMode below: Start your computer in safe mode http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode Step 2: If you can start in safe mode, then try a system restore to a previous point where you have not experienced the problem. Note: When you do the system restore to restore the computer to a previous state, programs and updates that you have installed are removed. To run the system restore, you can consult the following link: System restore http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore System Restore: frequently asked questions http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions Method 2: When you are able to boot into normal mode, try the following steps. You can read the following article and try to reset the Windows Update components and check. How to reset the Windows Update components? http://support.Microsoft.com/kb/971058 Hope this information is useful. Jeremy K If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly. Preparation configure windows do not turn off your computer When I start my computer, a message will come on indicating ' preparation set up windows do not. Hello This screen appears when you have pending Windows updates must be installed on the system or when you installed the Windows updates on the system. · What are the updates that you try to install on the system? · What operating system do you use? Method 1: As you said that you are able to boot into safe mode. I suggest you to uninstall the updates that are installed on the system. Follow the steps mentioned below. a. start in safe mode, and then click the start menu. b. type Windows updates in the start search box and press ENTER. c. click View update History and click install updates. d. click on the updates that are installed on the system and click on uninstall. e. before uninstalling the updates, make a note of the KB number and let us know what updates you are trying to install on the system. f. now check if you are able to boot to the desktop. See the article mentioned below. Remove an update http://Windows.Microsoft.com/en-us/Windows7/remove-an-update If this does not help, then follow method 2. Method 2: I suggest you do a system restore to a previous point where the system worked very well. Follow the steps mentioned in the article below. System Restore: frequently asked questions http://Windows.Microsoft.com/en-us/Windows7/system-restore-frequently-asked-questions Thanks and regards. Thahaseena M The message "configuration updates: stage 3 of 3-0% complete.". Do not turn off your computer. ' is on my screen for more than 2 hours. OS 64 bit Vista with automatic updates on the value. What should I do? Hello You can use the solutions in this KB - 3 methods and I listed a little help for them below The update is not installed successfully, you receive a message, and the computer restarts when you try to Method 1: Start Windows Vista/Windows 7 with the Windows installation media and use the repair feature How to do a startup repair in Vista and Windows 7 You can also do a safe mode startup repair to access the Recovery Options If you have them available This tells you how to access the system - Vista Recovery Options This tells you how to access the system - Windows 7 Recovery Options Try recovery options Startup Repair How to do a startup repair Method 2: Start the system in safe mode and then use the system restore feature How to do a system restore in Vista and Windows 7 You can also do a restore of the system of starting with a disk of Vista or Windows 7. Method 3: Use the downloads at the end of this article - note for Vista x 86 versions 32 bit and Vista The update is not installed successfully, you receive a message, and the computer restarts when you try to ------------------------------------------------------ Once you are in Windows I was running once again reset here as a precaution. How to reset the Windows Update components? Hope this helps sort it out for you. I have a 503WM Compaq Presario with Windows Vista Home Premium, which has problems after a Windows updated today. First of all, I have installed .NET Framework (3.5?). Windows Update started and downloaded a few other updates, and then asked to restart my computer - on restart received the updates configuration message, but when you have to configure the updates: phase 2 of 3-100% full. Do not turn off your computer, nothing happens--or my hard drive internal or external are doing something and Ctrl-Alt-Del does nothing. What should I do next? Before that, I installed Hallmark Card Studio 2010 Deluxe and received an error message 2738. Followed the instructions on Microsoft to add two files that had to do with the VB script. Hallmark installation instructions downloaded then installed .NET Framework 3.5. The update of Windows has started and installed (I think) 4 critical updates. Hello I guess that part of the question could be a driver which is really old or similar should not be loaded. This exit Windows updates on (after you have access) and stop the updates of the driver to load. How to disable automatic driver Installation in Windows Vista - drivers --------------------------------------------------- You can use the solutions in this KB - 3 methods and I listed a little help for them below The update is not installed successfully, you receive a message, and the computer restarts when you try to Method 1: Start Windows Vista with the Windows installation media and use the repair feature How to do a startup repair in Vista You can also do a safe mode startup repair to access the Recovery Options If you have them available This tells you how to access the System Recovery Options Try recovery options Startup Repair How to do a startup repair Method 2: Start the system in safe mode and then use the system restore feature How to make a Vista system restore You can also do a restore of the system of starting with a Vista disk. Method 3: Use the downloads at the end of this article - note for Vista x 86 versions 32 bit and Vista The update is not installed successfully, you receive a message, and the computer restarts when you try to ------------------------------------------------------ Once you are in Windows I was running once again reset here as a precaution. How to reset the Windows Update components? Hope this helps sort it out for you. Satellite 1410-303: black vertical banner on the far right of the screen Hi all I had to format my Satellite 1410 303, and then I added also 256 MB of RAM so the total is now 512 MB. It works fine but the problem is that now I have a black vertical bar, which covers about one inch from the far right of the screen and when How to activate the brightness in Vista with Satellite 5200 802 Hello! I'm on a Toshiba 5200-802 and I installed VISTA on it. It works fine except that normally in XP, there is a * Toshiba option (FN + F7 key) key * makes the * _screen brighter_ * and it does not work under VISTA. Vista startup, the default brigh HP dv7 1451nr Ethernet controller problem Then I reinstalled windows Vista and I downloaded all the drivers listed for my hp dv7 1451nr computer on the HP site but it won't always connect to the internet. It also shows that he needs a driver of Ethernet controller as seen in the photo below, I need to re - install Windows Vista, but I do not have adisk Hi all. Had a Sony Vaio with Vista Home Premium. It's worked well, but the other week, he dropped and since then it won't start. Got a local PC shop to recover files as much as possible, but he said there's a new hard drive, then reinstall windows - I downloaded Windows 10 & he gave me a few options for installing the download that forced a choice of days / hours. I would wait & need to know how to stop the scheduled time. Thank you.Similar Questions
I stopped him so he can make and it's updated 33/42 for 2 hours before I gave up and restarted
Visit our Microsoft answers feedback Forum and let us know what you think.
http://support.Microsoft.com/kb/949358
http://support.Microsoft.com/kb/949358
Thank you for using Microsoft Vista answers Forum!
Microsoft Answers Support Engineer
Visit our and tell us what you think. Janeynflorida
Give this one a whirl:
- http://support.microsoft.com/kb/949358>
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.
Turn off your computer. This process continues and does not set up, so I start in safe mode. How can I correct this situation?
Microsoft Answers Support Engineer.
Visit our Microsoft answers feedback Forum and let us know what you think.
install an update in Windows Vista and Windows 7
http://support.Microsoft.com/kb/949358
http://www.Vistax64.com/tutorials/91467-startup-repair.html
or use the DVD as described above.
http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx
http://Windows.Microsoft.com/en-us/Windows7/Startup-Repair-frequently-asked-questions
http://www.Vistax64.com/tutorials/91467-startup-repair.html
http://www.Vistax64.com/tutorials/76905-System-Restore-how.html
x 64 64-bit.
install an update in Windows Vista and Windows 7
http://support.Microsoft.com/kb/949358
http://support.Microsoft.com/kb/971058
Rob - bicycle - Mark Twain said it is good.
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx
install an update in Windows Vista
http://support.Microsoft.com/kb/949358
http://www.Vistax64.com/tutorials/91467-startup-repair.html
or use the DVD as described above.
http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx
http://www.Vistax64.com/tutorials/91467-startup-repair.html
http://www.Vistax64.com/tutorials/76905-System-Restore-how.html
x 64 64-bit.
install an update in Windows Vista
http://support.Microsoft.com/kb/949358
http://support.Microsoft.com/kb/971058
Rob - bicycle - Mark Twain said it is good.Maybe you are looking for