Canadian XPS10 - has LTE?

Similar Questions

• He can't change Z3 mode LTE.

  Hello. I bought a new Xperia Z3 Canadian company Wind Mobile. They have no LTE service. After 3 weeks of horrible service, I bought the phone out and went to Virgin Mobile (which has LTE), I got my unlocked Z3, put in the good AFN, and the phone won't LTE, in fact it is not even an option to switch to him. (in the settings, more, mobile network, the network mode). I went in (* #* #* #* #7378423) Service settings, network mode... I see here parameters of LTE, but when I select it, it not going to happen, it always comes back to WCDMA_PREF. Is there a way to get my phone to switch to LTE?

  Thanks for your time!

  Rob

  

  Flashtool on the link above, this isn't a third-party program, Sony, Sony has its own software, BUT you need to unlock the bootloader, not worth it, just download

  Flashtool

  FTF (firmware)

  Follow the steps

  It's pretty simple

  It will delete everything on your phone.

• Anyone having problems with the new iPhone LTE connection 7 on Verizon?

  I am now on my iPhone second 7 with Verizon. I had four phones for me and my family. I have now had issues where I have no signal in the same areas where my signal allows to be strong. I can't solve the problem with the activation/deactivation of the airplane and then mode again in normal mode. My phone will rest with no signal for 5 minutes, then going to LTE with three bars. I also had the problem where I had only 1 x signal, while my son standing right next to me has LTE. And he had the same questions, where I'm on LTE and it gets no signal. I use to have LTE where I live and work all the time, now it's spotty at best. Apple has replaced me and my sons iPhones but not luck. Still do. Any ideas or an any other suffering?

  (1) go to settings/cell phone/cellular data Options/enable LTE and select ONLY the DATA. This seems to solve the problem (as a temporary solution) for most of the people affected by this problem. The bad part is your request might not be as clear (since they cannot use the highest LTE signals) and you can make calls and data at the same time. But it does not solve the issue.

  (2) there are rumors (but you didn't hear that from me that we only are not supposed to discuss beta software program Apple in this forum) that the new version of Apple Beta for iOS (which also includes an update of the software carrier Verizon to 26.0) seems to solve this problem. So, there's a light at the end of the tunnel.

• > > > > > > > > > Creative cloud in Canadian Dollars. Please Santa? < < < < < < < < <

  Hey everyone, me here, once again.

  So this is my last post on this subject. I was as voice that I could have been on the subject and I am hoping to make a change with Adobe - hoping they will hear me and see that I make a valid point - a point that affects the creative people of an entire country.

  Canadians want to be able to buy the creative cloud in our own currency, the Canadian dollar. This is not an option. The only option for Canadians who want to buy services from Adobe is to pay in USD. Because the dollar fluctuates, the conversion will never be the same. Currently, the difference of the dollar is high. This price of $599 USD of the entire plan is thus to CAD $800. Who is several hundred dollars more publicity. As prices both on the purchase option. Even with the current Black Friday sale, it does not offer much of a discount, and in addition, it is not the solution. Adobe flat and simple, you see it as an investment to achieve more customers will come if the price is reasonable.

  I've been very vocal about the subject. I've never felt so frustrated with a company before. Its just upsetting that Adobe is not even talk or meet me on social media will not provide any info helpful to me on the forums.

  I was in rep contact chat tonight who assured me that an above will send me an email to discuss the issue before. I hope they have some knowledge on making decision on the issue inside.

  
  Some valid points, I think I should do on the reality of the software. It's never OK to fly, but the reality is that much (or -safe to say that more) get Adobe software illegally. I do not steal. Instead, I'm fighting for fair treatment so that I CAN buy. That's just the reality. So, for those who are trying to do the right thing and pay for their products, you would think the company would do everything in his power to make it more attractive and allows many more possible to get more. Now if a person has a choice - free or paying $ 200 on the advertised price, what do you think that most people will do? It must be said, because it's the truth. Think how many people out there who are independent, like me and aren't raking in mega bucks, it's upsetting not to be able to pay at least a fixed rate announced in our currency.

  Time and time again, the students and teachers are those with big discount offers - what is everyone - aka most users, individuals, nothing for use except the worst offer. Due to the current offer of plan, all or 1 - from - no room for manoeuvre.

  Maybe in 2016 - Yes, 2016, Canadians can use their own currency.

  I have really no more words to express my anger and upset in front of the issue and the lack of response from Adobe to date. Perhaps one day that may change. Until then, I'll fight for whats right and defend my country. Adobe, we aren't third class citizens.

  

  Thank you. I am a Canadian who has also been struggling with the same problem. Worse still, I am a Canadian in Alberta, who recently became unemployed. I wouldn't cancel my service, but I might have because I just can't afford it most (it has fluctuated between 70 and 80 a month!). Fortunately, they were able to offer me a * slightly * low rates in USD today which means I can mount a little longer (if everything is fine until I get to the money coming). I can't believe they're AUS subscription price but we Canadian are being grouped with the United States under the assumption that the our dollars are basically the same. I can't help but feel that this Canadian market Freelancer is ignored, and I think it's a big mistake on the part of Adobe. Good luck with your complaints at Adobe. You are not alone!

• Question about drivers for Tecra 9100

  My Tecra T9100 do not work with LAN more after the installation of a new HD (old one crashed) and where some Toshiba files on the old HD that I don't know. (Bought the laptop 2. a few years ago by hand) and I lost the CD that belongs to her, and there is no drivers on this site for this 5 year old machine. Maybe a little strange because it's a P4.

  In the list of hardware (control panel/system /) there is no problem with the network card. But at the top of the list, there is a yellow "?" for the UNIT of BASIC SYSTEM and there is the missing drivers.

  It's very confusing to me because I've never heard of these drivers and I don't know which device is the following. There is also a yellow "?" for PCI modem (but I didn't need) so I guess this unit of base system has to do with the PCI-bus and perhaps also affects the LAN card?

  But shouldn't? the drivers will be in the BIOS?
  Can someone help me?

  Hello

  You should take a good look here:

  http://209.167.114.38/support/download/ln_byModel.asp

  because here, you will find all the drivers for your computer. The Canadian site has almost all of the drivers for older machines, and you should really check out.
  I think that "basic unit of system" could be something with ACPI or similar. But lets wait until after you have installed all THE drivers and then give feedback short.
  And no, the drivers are generally not in the bios because the bios is just to boot but it s OS independent.

  Greetings

• Is it possible to pair the Apple Watch with the iPad mini?

  I really want to get the Apple Watch 2 when it comes out, but I'm sure that you must have an iPhone and I did not. My iPad mini has LTE and iOS 9 However and it is implemented with iMessage.

  Hello

  I'm not afraid - you need an iPhone 5 or later running iOS 9 or later to associate and set up Apple Watch.

  It can be combined or synchronized with any other device iOS (including iPad) or with any other Apple device (including the iMac, MacBook, MacBook Pro, etc.).

  More information:

  Set up your Apple Watch - Apple Support

• Windows Update still says "Windows 10 could not be installed"

  This is a supplementary question of "W - 7 portable is still trying to move to W - 10.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-update/w-7-laptop-is-still-trying-to-move-to-w-10/0c0f4b6f-A269-4e04-bc9e-c18a0b6c8078

  Canadian technology has given me the help I needed to get Windows Update, run again, but remains a problem. Even after the download and installation of updates today, Windows Update always starts with "Windows 10 could not be installed" with the error 80004004-40019. Is it going to annoy my client forever or there at - there a way to reset Windows Update in order to start to show the previous screen of the remaining updates?

  And to make the situation quite clear, the client never asked for Windows 10. His anti-virus caused all coming to a sudden stop (long story), which was actually a good thing because Windows 10 could not settle via deceptive tactics of Microsoft. I manually uninstalled all updates of Windows 10.

  Suggest:

  1. Install the GWX Control Panel and use it to stop the thing Win10
  2. Set Windows Update to NEVER, and then you take responsibility and control to manage the process.

• iPhone over Verizon's LTE 7 / coward calls problems

  I've recently upgraded from Android and buy my first iPhone. I like the phone, but it seems that the connection of data/LTE is horrible on the phone. I am constantly finding my phone is stuck on the 1 x or 3G connection and not being able to catch LTE in places I know are a LTE connection. In addition, sometimes my iPhone will drop calls. When I am I'm in my apartment, so I turned on wifi my component wifi works well, but other places, it deletes the call. Not sure if this is related to the issue of LTE connection. Does anyone else have this problem on Verizon?

  I'm in my Exchange/return policy so I don't know what I have to do.

  Have exactly the same problem: iPhone 7 more 256 GB Black Verizon. Pre-order the phone got on 21 September and after a few days without service drops to 3G and stays there until the toggle airplane mode or reset network. Went to Verizon 23 got a new SIM card and after a few hours, the problem came back. Next day went to Apple told them the problem they did exchange of unit that had to be ordered because he had no stock and 27, I got the replacement phone first day that it was quite good, but the second day, all the problems are back this time the phone has a whistle as well... so on September 30 , brought the phone to apple as well as the box and they said they can get a me another replacement and I refused it not knowing not if its released State and requested a refund, but Engineering did not repay because the serial number is different from the box. Fortunately, I chatted with Apple the previous day and received the email and talked to the Manager and eventually returned the device.

  Back to my iPhone 6s now and no problems with the service even with VoLTE on. Don't miss the iPhone 7 more size and stereo speakers, but I'll wait until all the bugs and hardware issues are fixed before ordering again!

  I had an iPhone 5, 5s, 6: 6 without any problems until one. I returned mine because they gave me a replacement not retail box with the same question. I want to keep the phone but has returned to be sure whether a hardware problem is present they will fix it on the line, so I'm going to order a new one.

• Has anyone lost their 4G with the update?

  I have an iPhone with T-Mobile 5. I have updated to iOS 10.0.1 slightly more 2 weeks ago (Wednesday, 14 September). I had zero problems with the update until 2 days ago (Wednesday, 28 September). Since two days ago, I don't have 4 G service. It works now only EDGE. For T-Mobile users not, EDGE is the network used when 4G isn't available (similar to 1 x the Sprint). It basically lets you helpless with the data if you are not able to be on wifi. Page load times are like being in 2005. Too slow for the cards to work, checking e-mail takes several minutes, etc.

  I tried to reset network settings, update the carrier settings, turning the phone on & off, turning 'Activate LTE' turn off, but also to talk with the service the customer. T-Mobile says I'm connected to all the right tricks for 4 G and does not know why I don't get 4 g. I also tried updating to 10.0.2 yesterday evening hoping that there was a difficulty with it, but it was not. Has anyone else had this problem in the last days (with or without T-Mobile)? It worked fine for the first 2 weeks of the update.

  Maybe (or maybe not) related to the following: http://www.macrumors.com/2016/09/29/verizon-iphone-7-connectivity-problems/

• Iphone7 and questions of Verizon's LTE

  I've recently upgraded to Iphone7 128 GB with Verizon. I am constantly having problems with LTE. My phone drops to 3 grams, or 1 x in areas that my partners (Iphone6s) phone still works like for LTE. I was restarting my phone or turning data cell power to overcome this obstacle, but it is not acceptable. To what extent it should go?

  Yes, I recently saw that happen as well, as my 128 GB iPhone 7 has arrived.  I just reset my network on the phone settings and that may have contributed (see more bars at home now).  You need to try for another day or two.  In addition, this seems to be a more widespread problem, and Apple and Verizon are aware (http://appleinsider.com/articles/16/09/29/iphone-7-owners-complain-about-issues-with-bmw-bluetooth-support-verizon-lte-c...).  If resetting network settings does not work, I'll call Verizon to make sure they have something in the two weeks that I pay for LTE (not 3G) service.  Thank you.

• Compatibility of tape/carrier LTE-MKRY2LL/A

  My wife and I currently have two iPhone 6s, we bought at Verizon. I find anywhere what model numbers matches to the top with these phones. The settings on the phone he lists as MKRY2LL/A, but I can't find that anywhere on the Apple site. Verizon has terrible service where we moved and I want to know if we could use these with ATT without any problems. I have no idea what LTE bands these phones to use nor do I know where to find information. Any help would be useful. Thank you!

  Click here and see the first paragraph.

  (142262)

• iPhone 5s says instead of LTE 4G? ...

  We have 4 AT & T 5 s users belonging to the family. 3 of 4 always say 'LTE' in the status bar area. And we have good LTE coverage around here. But I noticed that 32GB 5 s wife said just 4G all the time. Everyone has the latest version of the iOS version. I restarted the phone and reset the network settings, but nothing helps.

  Any ideas? Type of puzzled.

  Thanks in advance.

  '4G' is what AT & T calls HSPA +. It is a slower, older than LTE Protocol.

  If you have reset the network settings, the next steps would be to restore from a backup, and then restore as new.

• How will I know if I'm connected to lte advanced and not ordinary lte.

  When I am connected to data, it will say either 3g or lte, but my friend who has a samsung s6 said lte +, I was wondering if I am connected to lte advanced and not ordinary lte.

  As far as I know, the LTE icon on the iPhone does not display the plus sign next to it, if the phone uses the advanced version of LTE. In this case, you will need to use an application to measure the speed of connection for more details.

  And, of course, LTE advanced must be included in your contract of carriage.

  Data plan required. Calls LTE Advanced, LTE, VoLTE and Wi - Fi are available in some markets, as well as some carriers. Speeds are based on the theoretical flow and vary depending on local conditions and the transporter. For more details on the LTE support, contact your carrier and see www.apple.com/iphone/LTE.

  copied from: http://www.apple.com/iphone-6s/technology/

• iPhone SE (and other iPhones) LTE bands for the United States and EU

  Issues related to the:

  1 is the work of A1662 free default sim in the EU (Germany, France, Sweden, United Kingdom) Although it having not band 7?

  According to this article:

  http://www.theguardian.com/technology/blog/2012/Mar/28/4G-broadband-UK-how-fast

  Essentially, there are two categories: high-frequency (2600 MHz) or low frequency (in the United Kingdom, 800 MHz). Low and high frequencies have different characteristics: low frequency signals are better at penetrating walls, but high frequency that can carry more data in a given time.

  2. is it possible to buy the unlocked A1723 model here in the US somehow? All LTE bands appear below active on the models we A1723?

  Details:

  I am from the United States, but I will move to the EU for two years. When I look at networks LTE in Western Europe, it seems that the 3 most common bands are 3 (1800 MHz), 7 (2600 MHz) and 20 (800 MHz).

  https://en.Wikipedia.org/wiki/List_of_LTE_networks_in_Europe

  The new iPhone includes two models with the sim model without being A1662:

  (1) model A1662 - LTE (groups 1, 2, 3, 4, 5, 8, 12, 13, 17, 18, 19, 20, 25, 26, 29)

  AT & T, Verizon, T-Mobile, etc.

  (2) model A1723 - LTE (groups 1, 2, 3, 4, 5, 7, 8, 12, 17, 18, 19, 20, 25, 26, 28)

  Boost nTelos, Sprint

  iPhone SE

  http://www.Apple.com/iPhone/LTE/#iPhone-se

  http://www.Apple.com/iPhone-se/specs/

  Note: I currently have 6 s iPhone (which has all 3 EU LTE bands) but I don't like the size and so I will be effective to the SE.

  1. n ° actually, probably not. He peut work on certain carriers in some areas. It depends on the specific network.

  If LTE is important to you, just buy a phone when you get there. You are going to be there for 2 years. Also, you may well have a phone that supports their networks and you can get serviced here if necessary.

  2 n ° holders that this model is sold in the United States do not unlock. These phones are locked.

• Satellite L500 - ERROR = copy of splitpart or Canadian Red Cross failed!

  Well, I tried to reinstall vista with the cd/dvd recovery I ordered. I tried both versions 32 and 64 bits on disk, but as soon as it reaches a certain point on disc2 (copy some .swm files 7/9), the error "copy of splitpart or Canadian Red Cross failed!" appears.
  I googled on the CRC errors, but I think I can exclude most of these things such as cable, the scratches on the disc, a.s.o. loose connections unless it has something related to the hard drive... but I could install non - oem vista without any probs, not sure if it's really hard partner.
  I hope someone can help me here.

  Post edited by: babtong

  Hmm maybe you need to format the HARD drive first?
  Clear all all the partitions to format HARD drive and try again the recovery disc may be a few partitions tables start affect installation

  If there is something wrong with the recovery disk and maybe you need to order a replacement