Cannot access a white screen at Startup - Mode safe

I have a HP Pavillion laptop dx4 under Vista Home Premium.  I can't give a lot more in the way of care because all the thing will give me is a blank screen and I don't have the stored information.  This is what happened:

My computer was working fine last time I used it with success, that 24 hours ago.  (I should point out that I do not use Incredimail, since this seems to be the root of the problem in a lot of posts I've read looking for help with similar problems).  Today, I opened the laptop, and when the screen is turned on, it was white Uni.  Tried the CTRL + ALT + DELETE, touch Windows, etc. but the computer did not respond.  A hold down the power button to restart - screen went straight to white when he turned his back.  Tried to go to Mode safe mode by restarting again by pressing F8, no luck.  Tried to let the computer just sit with the white screen, nothing happened.  I don't have a Vista installation CD, because the software was preinstalled when you buy.  Honestly, I don't know what could have caused this.  No error messages, no upgrades to facilities, or recent day etc.

Any suggestions?

If your laptop has been provided with recovery discs, there is a hidden restore partition that you would have access to the recovery disks. Probably too late now, although if you call HP support, they can offer a recovery disc for a small fee.

It seems your display has no, or less connection to the motherboard, time to visit the HP repair shop

Tags: Windows

Similar Questions

  • HP Jet 11: White screen at startup

    My 11 HP workflow starts with a white screen on startup. Sometimes responds with a hard reset but still does not work. Have changed the settings to do nothing when the lid is open or start button / stop is pressed, but still problems.


    Thanks for posting in the Forum from HP Support. Welcome!

    Looks like a problem of driver for me.

    Please, use HP Support Assistant = >

    Make sure that you have applied all the latest drivers and updates from HP.

    Please, use Windows Update and check if you have installed all the latest patches.

    I would like to know if it works for you.

  • Satellite A85-s107 - white screen at startup by using the power of the battery

    Satellite A85-s107 white screen at startup by using the power of the battery

    When I boot A85-s107 in battery power, it is get booted up in the background, but my screen is empty.
    After that if I connect it to AC power and switch deactivation/activation of the laptop power button, the screen comes back to life.

    There is no problem when I start upward when it is connected to an electrical outlet.
    Battery is fully charged and computer will work off the battery voltage if I remove AC after boootup

    Any suggestions?


    also note that when I remove AC and then reconnect I start the computer on two occasions that it does not start the 1st time?

    Don t need to recharge the battery if the AC adapter is plugged ;)
    Try the tips posted by Alex otherwise it of a hardware problem, in my view, there seems to be something wrong with the motherboard...
    In this case, only the replacement could help and it could be a costly affair

  • Computer laptop white screen at startup

    A few days before, at a bend on a laptop, the screen remains blank (was not lit at all) but the computer sounded as if it was put into service. What are the possible causes for this problem?

    Hello Pierre,.

    Thank you for using Microsoft Community.

    1. does the computer boot to the desktop, or you see the white screen on startup of the computer?
    2 did you change on your computer?
    3. What is the brand and model of the laptop?
    4. as you mentioned, "when you turn on your laptop, the screen remains blank (was not lit at all) but the computer sounded as if it was put into service ', what exactly happens when you start the computer?

    If you get white screen SAT after the start of the desktop, then I suggest you follow this article and check.

    Why my screen is black when I start Windows 7?

    Important notes:
    When you use system restore to restore the computer to a previous state, the programs and updates that you have installed are removed.

    Serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

    Please answer with results so that we can help you further.

    Thank you

  • PavilionDV4T-1400 white screen at startup

    I have a Pavilion DV4T-1400 , who immediately becomes a white screen on startup. I have no options. This happened out of nowhere.

    Here is some information:

    -Locks caps/scroll/num doesn't turn on when I press on the

    -It has a slight smell of burn on it when I turn it on

    -J' tried a hard reset (power off, then press on and hold power)

    -J' I tried to delete the memory, that I get no beeps, just a black screen and the scrolling/caps lock lights will Flash 4 times

    -J' had the computer almost 2 years warranty for 1 year.

    -J' have the knowledge/skills to remove and replace the maps system etc.

    I'm looking for some advice, or what someone might think the problem is, so I know what to replace.

    Any ideas? It is greatly appreciated. Thank you.

    Anything it is displayed on an external monitor? If so, it's the screen or the cable and not the mother/gpu card. If this isn't the case, the new, it's worse. According the description, of course looks a catastrophic failure of the motherboard. The slight burning smell is really a bad sign.

    Here's a motherboard on ebay:


    The price is a little high but lower than HP would be. Go down you $ 20 for a Exchange. There are also several services advertised on ebay that will repair your device for about the same price or a little less.

    Here is the manual if you choose to DIY:


  • White screen on startup XP

    With respect, I have had no toolbar or the desktop icons. I found a solution for this and that these items have been restored. After XP restarts, the screen is completely empty. I can hear all loading but seeing that everything is not. Can't do CTL + ALT + DEL to pull up the Task Manager. I can just restart in safe MODE to access the office. How can I fix this white screen?


    Since you're able to boot in safe mode there is an application or driver that generated the conflict. I ask you to perform the boot minimum troubleshooting to find the root cause of the problem. Start the computer in safe mode, and then configure the computer to clean boot and check.
    How to configure Windows XP to start in a "clean boot" State
    Note: When you have finished troubleshooting, proceed as explained in the article to reset the computer to start as usual.
    Hope this helps

    Thank you, and in what concerns:
    Shekhar S - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.
    If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • Apple MacBook Pro with a white screen on startup, help!

    Hello world

    I was the creation of a powerpoint for an AE conference is next week and while running my Mac screen is temporarily deformed and then turned to white. I left for a while and then held down the power button to restart. On this operation, he got successfully to the stage where I enter my password, then displays the bar loading. At mid-way through charging it cut to white again and reworded. I then repeated several times, same result.

    Solve by looking at the options online, I tried following technical success:

    Command-R power on: goes to the white screen after the chime.

    Command-option-R-p: goes to the white screen after the chime and apple logo.

    Command-shift: enter the stage newspaper but then white screen.

    Command + S and fsck - fy: mac says is 'OK', rebooted and got the white screen after the chime and apple logo.

    Connected to the mac to work with cable Thunderbolt: mode target open successfully, but the drive does not appear on the mac to work.

    What can I do else?

    There is no apple in my store.

    This is a 17 "Mac Book Pro with El Captain OS X (don't know which) no history of problems...

    I hope someone can help.


    Try resetting the SMC

    Reset the management system (SCM) controller on your Mac - Apple Support

    If you try a safe boot, just hold SHIFT when the computer comes on, not Command-Shift.

    In addition, if you can get to the login screen, try to hold SHIFT while you connect to your account (not while you type, but when you have finished your password and immediately after pressing enter/return).

  • White screen after the Fail Safe Mode - XP, graphics, nVidia, graphics card

    Recently, my office computer Gateway running Windows XP was invited to update the nVidia GEForce 6100 driver.

    I went to update this driver.

    On the next boot, I waited several minutes, but the computer hung up on a screen empty AFTER the Windows screen.

    I tried to restart the computer normally several times, but still and always the white screen appeared after installing windows.

    I have my computer in Mode safe start, which I did. In safe mode, I disabled the graphics driver nVidia and restarted my computer. To restart the computer, it has actually reached to explore. However, in all the windows, I opened the image lag. Instead of a fluid scrolling, everything has been hectic.

    I have to enter the BIOS setup and clicked to start my computer in mode 'fail safe '. Afterwards, when I press the power button on my computer the blue light turns on, fan is running, and a single beep of the singular but NO picture on my monitor.

    I tried my monitor on another computer and it worked fine. I plugged the monitor into the gateway PC and yet, I get a black screen as if the Office Tower does not recognize the monitor.

    I thank you very much for any solutions or advice, you should be able to provide!

    All the best,



    Please restart in safe mode, and then do the following

    Start - right click my computer - manage - Device Manager - adapt display - nVidia...

    Right click - Properties - driver tab - back driver.

    This should bring back your previous working driver.

    Please keep in mind that my answer is based on the information in your message. More the better I can answer, Slan go foill, Paul

  • Computer hangs on a white screen on startup with the keyboard is plugged.

    Original title: I have a problem starting

    I have a problem when I start my pc with my internet stick plugged and it hangs on a white screen. I have to get the key out and close my pc and reboot to get to the screen to login manually.

    This also happens randomly - some days it just starts with the key and the other days he dislikes the key and goes to blank screen.

    Why is this randomly - this is my question? If the settings are the same so why did happen randomly instead of blocking me or just start every time? Why is it random?

    Equipped with Vista

    Hi donga65,

    • To go through the other advice?

    Try Method 1 to downstairs, go to the method 2 If this does not resolve the issue.

    Method 1: You can update the drivers for the computer to check the issue. Log on to the manufacturer's Web site and install all the device driver updates including the chipset. See if it helps.

    Method 2: Make sure that the BIOS (Basic Input\Output System) is not altered. Check the boot sequence and make sure that the hard drive is the first boot device. Check with the manufacturer for more details.

    Important: Change (CMOS) BIOS/complementary metal oxide semiconductor settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

    I hope this helps.

  • (Redirected) Precision M6500-white screen on startup and black screen on reboot

    Hello my Precision M6500 has recently begun to behave badly and has following symptoms.

    1 display a white screen on market and a black screen on reboot, the OS boots aand, one that can discern by the jingle of windows at the end of the startup procedure.

    2. the unit turns to the insertion of the battery.

    In order to isolate the root cause of these issues, I tried the following without success.

    1. replacement memory

    2. new display motherboard cable assembly

    3 start with on the SSD on the system, and even at the bios level that the symptoms remain.

    Anyone knows similar symptoms with their unit and if what was then the final fix deployed to solve these problems.

    The system is running an ATI graphics card I read a little about the black screens in booting with Nvidia cards, can anyone confirm if all the info out there has any application for ATI cards.

    Thank you


    As you have a laptop, better make this laptop in the computer Forum post here:


  • white screen on startup of Windows7 Pro on my PC

    My PC worked perfectly just three hours, but when he starts again this afternoon, I have a white screen and nothing else.  I can't get into safe mode, or do NOTHING at all.  I rebooted several times, but without success - all I get is a white screen.    I checked all the connections etc everything is as it should be.  What I can do. (I'll send this to my laptop)

    It is worth noting to do with Windows at all, you have a hardware problem, I guess the video card or onboard controller is bad or maybe something as simple as loose cable or bad.  Don't you hear beeb sounds of any kind?  The computer is still under warranty?  How old is it?  If you are not familiar or confident with the material ask someone who knows computers to help you or to take in a little tech shop that has a good reputation (not a big name, a big box computer store).


  • Flash Player 10 gives a white screen on the mode full-screen Mac OSX10.4

    Farmville on required FireFox: Flash Player 10.1 be installed.  After download and installation, mode full screen does not work, produces only white screen.  I deleted the cache and restarted, Javascript is enabled, popup windows are not blocked up.  What can be done?  Help, please. This is my mom's computer and she needs full-screen in order to appreciate its Farmville.  We want all our Mamas to use their computers, don't we?  Thank you very much for any assistance provided.

    What I mean is that if the "Enable hardware acceleration" option is checked, try to uncheck.  (Hardware acceleration is a feature of the video card on various brands, not just Intel.)

  • Portege Z930 - white screen at startup

    My Z930 screen is empty at the start. The cursor can be seen when is moved around the screen, but there is no
    background a screen empty. stop holding the Start button / stop does not seem to work and the DSS led flashes slowly. When you open the lid of that unit starts automaticlly displays white screen and the cursor.

    I'm a computer completely illiterate, but if anyone can help me in words laymans terms, it will be a great help

    > now the button stop / stop does not seem to work

    That s is really bad.
    Due to Toshiba power button on document - - should have the double function.
    Unplug the power plug and press and hold the power button / stop. I think the laptop must be turned off after a few seconds.

    Are you able to turn off your laptop somehow?
    Can you please elaborate on this subject? Since when did you notice this?
    Have you done something before your laptop started acting in this way?

  • White screen on startup of the satellite C850

    I bought a Toshiba Satellite C850 PSCBWA-05E001 so 18 months out of warranty now.
    I bought it for a few friends, I gave him to who are in the Philippines, so it is difficult for me to check and repair. My friends lack the funds to get it checked if any help would be appreciated.

    Some days he started to initiate a white screen. You can see the mouse, but that's all. They are unable to get the computer display anything. I read on several forums that it could be a video cable however I got them to hooked to an external monitor to work through the laptop's VGA output & restarted the laptop & the external monitor goes to white screen which are also seems to exclude a faulty video cable as this would affect the monitor to the laptop only I think.

    I'm concerned that does not the video card is a graphics chip of integregrated I guess that means to replace the whole motherboard I guess.

    Very disappointed for my friends since the machine is just out of warranty.
    Someone at - it ideas?

    > I am afraid that does not the video card is a graphics chip of integregrated I guess that means to replace the whole motherboard I guess.

    Yes, I have fear of the motherboard must be replaced in case of malfunction of the graphics card of m.
    It would be the worst cases because the new motherboard is very expensive and in most cases it s not worth buying a new motherboard if isn t valid warranty more.

    I have no many solutions for you; It looks like a hardware problem and to resolve this problem, replace the defective part. But of course, it of a just a question of money :(

  • Satellite L450D - white screen at startup


    my laptop shows a blank totally black screen on startup of the hard drive light is not blinking but I can hear the fan.

    Suggestions welcomed

    On this virtual path, it is not easy to say what the problem is here.
    Did you do something that might be responsible for such behavior of s to laptop? Update the BIOS maybe?

Maybe you are looking for

  • Maid in Ethernet does not

    Data sheet: MacBook Pro (retina, 15 inch, mid-2015) Intel Core i7 2.8 GHz 16 GB 1600 MHz DDR3 693 GB free on flash memory El Capitan v. 10.11.3 Problem: I wrote an e-mail, and he said that she had failed to save him. Tried to shoot to the top of Face

  • Download the 'batch' after 'Test USE'

    Hello I'm usung the standard "full functionality" Testexec.exe like my UI and everything works fine. But I need get the user a 'code batch' only once after that the user presses the button "USE Test" (not once per USE) and get this ID insterted in te

  • Charger for Acer Iconia A700

    Hi, I broke my charger for Acer iconia a700 but I can't find anywhere on the internet so pls tell me where I can find it? Thank you

  • List of recent items now in alphabetical order

    Recently, I found that my "recent items" list modified sequence. It was organized by accessed date-time, but is now in order of file name. Which is, of course, totally useless unless the file is alphatically in the first 1 - x in the list. I don't kn

  • SE 8004B0CE of error: failed to add more websites to parental controls

    I follow all accounts on our office, including the parent (Administrator) account in the case where my wife or I forget to lock and one of the teenage boys gets parental control.  However, it is causing a bit of a headache for us now, as my wife look