Cannot access another data base "ROWTYPE.

Similar Questions

• Zune and Windows 8 "error reading the Zune software cannot access important data on your Zune." Try to disconnect and reconnect it. If the problem persists, contact customer support. "

  I have a Zune and Windows drive * on my desk. Everything worked fine until today while I got the following messages. In Zune: "Error reading the Zune software cannot access important data on your Zune. Try to disconnect and reconnect it. If the problem persists, contact customer support. "" Then on the computer: "USB device not recognized." "

  I have a Zune and Windows drive * on my desk. Everything worked fine until today while I got the following messages. In Zune: "Error reading the Zune software cannot access important data on your Zune. Try to disconnect and reconnect it. If the problem persists, contact customer support. "" Then on the computer: "USB device not recognized." "

  Message error "the Zune software cannot access important data on your Zune.

• VDP: Cannot access the data store

  Hello!

  I have a problem.

  Every day I see error for one of my servers in "reports":

  2016-07 - 05T 06: 00:47.971 + error 06:00-[7F2F3FA5E700] [Originator@6876 = transport sub]

  Cannot use hotadd mode to access the FileSrv1/FileSrv1_1.vmdk [Cisco2-datastore]: can't get using this method.

  (Mounting VM using vm-3198 transport hotadd failed: cannot access the data store for one of the drives of the Machine virtual FileSrv1..)

  At the same time, I havn't this error for the other servers.

  "FileSrv1" has not has installed "VMWare tools". After the instalation "VMWare tools" on this server, the problem is resolved.

• AutoConfig error: ORA-12705: cannot access NLS data or invalid environment specified files

  Hi, experts:

  When it is run on the database layer, obtained adautocfg.sh

  ====

  ....

  Executable: /ap10/immted/db/tech_st/11.2.0.3/bin/sqlplus

  SQL * more: Production of liberation 11.2.0.3.0 Sat Jun 28 23:30:17 2014

  Copyright (c) 1982, 2011, Oracle.  All rights reserved.

  Enter the value 1: enter the value 2: enter the value 3: ERROR:

  ORA-12705: cannot access files of NLS data or invalid environment specified

  =====

  We have 12.1.3, 11.2.03 and Linux. I've issued $unset NLS_LANG, set ORA_NLS10 = "' in the .env file." What should I check?

  In the $ORACLE_HOME/appsutil/contextfile.xml the following:

  "s_db_oranls" = "unix" OSD > /ap10/immted/db/tech_st/11.2.0.3/nls/data/9idata < / ORA_NLS >

  Thanks and greetings

  Now, I got the same error when doing $sqlplus / as sysdba. $sqlplus/nolog is fine.

  Hello

  AutoConfig was successful before?

  Are there any recent book.

  If you're upgrading from 11.2.0.3 or recently updgraded to 11.2.0.3 database, then course do perofmed you listed in article - 7 for creating data 9i of the below TechNote MOS.

  Interoperability note Oracle EBS R12 with Oracle Database 11 g 2 (11.2.0.3) (Doc ID 1585578.1)

  See also below the TechNote if is not for 11.2.0.3 but his relevant:

  Upgrade 9i to 10 g 2 fails with ORA-12709: error loading creates characters of the base set (Doc ID 732861.1)

  Thank you

  A H E E R X

• Cannot access the data on Western Digital My Book Essential.

  Original title: Western Digital My Book Essential

  Cannot access data stored on My Book Essential 3 TB.  Desktop computer no longer recognizes.  Laptop sees it, but I can't access the data.  Cord replacement binding have at the least visible on laptop & office 'discover' for a long period of time.  An hour pending with Western Digital with no live person on the line.  Am now thinking the drive can't be fixed and Western Digital is not actually support.

  If I buy a replacement, how to make the data from the old to the new?  All suggestions will be useful.

  Moved from IE

  If you do not see the data, you can not transfer it. Keep trying with Western Digital.

• Tecra A4: Matsu * a s uj - 831 - cannot access any data CD

  Hello

  I have a new toshiba tecra a4
  I have the combo dvd: Matsu * a UJ - 831S
  and I have the following in less than 4 months of use problem:
  Since yesterday I can not access any data cd, audio CD are ok, so on DVD.
  When I go to my computer and click on the drive I get the message "D:\ not accessible incorrect function".

  I tried to uninstall the software, etc. But nothing.
  I tried to boot from the dvd from Toshiba, is the beginning, I tried to boot from cd does not start.
  so the problem is hardware
  I downloaded the firmware (Loder_831_V102.exe), but he said: "the target disk is not connected" and I can't upgrade.

  So what is the problem, can it be fixed?

  Hello

  It's not easy to tell how to solve this problem.
  But first of all, you can try to remove this device in the Device Manager.
  After startup, the operating system should recognize the drive again.

  If this procedure doesn't help, well it could be a disk failure.
  If the warranty is valid, you should ask the ASP for a replacement.

  Good bye

• my hard drive is on, but cannot access the data on it

  It is connected to the computer but I can't access the data on my hard drive is recognized. I went to the Device Manager it is there as a gateway usb device and it also says it has 0 MB on it but I have now, there is data on the hard drive. I don't know what to do because I can't move my family photos to this topic. I would like to get things out of here before I have to go to the extreme of formatting it again. Help, please.

  I realized what it was, I had to take the hard drive from the case and hang it in my lap and it works very well. the external hard disk is bad. I don't know how or why but it's bad

• Cannot access local data store after the upgrade to build 158869

  I've been running ESXi 3.5 on a Dell Optiplex GX620 (A07 BIOS, a single SATA hard drive) for a few months now.  This morning, I applied the update version 158869 in the system with the Infrastructure Update and rebooted, it.  In the Infrastructure of the customer, I now get a banner stating "VMware ESX Server has no persistent storage" and I'm unable to access the local storage on the system.  I have tried rebooting, changing the SATA operation mode and a rescan for new devices storare and VMFS volumes, all nothing will do.

  Does anyone have any ideas on how I could get the server to see the data again, store or otherwise, what would be the best way to mount the drive in another system and copy virtual machines off of it?

  Welcome to the VMware community forums.  See if that helps - http://www.vm-help.com/esx/esx3i/no_persistent_storage_after_upgrade.php.

• Cannot access the data of a dvd burned using Windows Vista

  Mr President.

  We burned a dvd using the integrated software disc Vista burning... the procedure was as follows:

  After inserting the disc, we formatted the disk by checking the "Quick Format" option... the format once completed, we pulled the folders n files that are supposed to be stored on the dvd n that the process has begun... After the end of the burn, the dvd is ejected automatically... but the dvd is not readable on other laptops or desktops... well helping... data are very IMP... We have no other backup data... and we have formatted the old laptop and upgraded to Windows 7...

  Forward to your response

  Kind regards

  Hitesh Baku

  How does the combustion process end - did you finish it or simply eject a DVD?  If you have completed it, exactly, that you have to finish?  What type of backup has been made (or did you use just copy/paste instead of the grogram backup) and what version of Vista are you using?  Did you use the live file format or the image ISO format http://www.ehow.com/how_5013668_copy-cd-dvd-windows-vista.html?  What kind of CD or DVD (CD, CD - R, CD + r, CD - RW, DVD, DVD - R,...)?

  Insert the DVD into the drive and go into Windows Explorer and right-click on it and select explore.  Any files or folders appear?  Go to start / Control Panel / folder opt / view on the and make sure that the button to view the hidden files is checked.  Also check the box to show system files and uncheck to hide extensions of known file types (this can be useful later).  Nothing now watch or it always seems to be empty.

  Go to start / Control Panel / administrative tools / computer management / disk management and check on the DVD in the car and tell me what it says on the size and the amount of available space (in other words, think data on the DVD).  Closer to your mouse on the DVD player and a text box appears above it lists criteria to this stationary player down.  Please post what he says EXACTLY, in the same order, as it is presented.  Does show as active for example?

  Here are the instructions on how to copy data from a hard drive to a CD.  Read carefully.  You skip steps or fail to wait until the processes were completed before moving on to the next step?  If we know what hurts you, it may be possible to fix it - but I don't know (because I have no idea, but why it happened). http://www.ehow.com/how_5013668_copy-cd-dvd-windows-vista.html.  Also, check out the following article, especially the section about closing or to finalize the process and see if you have done this http://windows.microsoft.com/en-us/windows-vista/Disc-burning-frequently-asked-questions.

  Here is another article on how to burn a CD/DVD in Vista to test to see if you followed the procedures as indicated or anything left side: http://maximumpcguides.com/windows-vista/burn-a-cd-or-dvd-in-windows-vista/.

  I believe that you have finished the session before it was finalized and it's the cause of your problem (assuming that Disk manager shows ALL the data on the dik at all - in which case I am afraid that the information was not stored on the CD/DVD and are not recoveralble, because there is nothing there to recover).  If the development is the issue, there may still be a way to finalize the disc - although I'll have to research further on this subject because I don't know how to finalize a disc that has already been ejected before it was finalized (and depends on what probably treat you used).

  ===========================================================================================================================

  Even if you have your drive formatted and installed Windows7, it is still possible to recover some of the data that was stored there using special recovery software.  I don't know if these programs work with Windows7 (it is a forum for Vista) but you can check the details before you download them or go to the Windows7 Compatibility Center to see if they are listed http://www.microsoft.com/windows/compatibility/windows-7/en-us/default.aspx.

  The files are not really deleted until they are crushed (although they are no longer available through conventional methods).  If you decide to try these recovery programs, you should stop using your drive hard immediately in order not to replace the data that you are trying to recover.  He slave on another PC and launch the recovery of this PC.  Even now you have definitely lost some of them if you use the same PC.  If you can not do this (slave on another PC), you run the risk of overwriting the data with every action you do on the PC (but you may still be able to recover some or most or even all files - it's a matter of luck).

  Only you can decide if the data is important enough to take the PC to an expert data recovery to recover files (they will have better programs and hardware to do that none of us do, and I've provided above).  Do NOT go to the Geek Squad or one of these centers of store-, they generally don't know what they are doing - it take for expert data recovery.  It will cost you a little and they generally offer no guarantees.  The decision is yours.

  Here are some free recovery programs that might help:

  http://www.SnapFiles.com/freeware/system/fwdatarecovery.html (first try Recuva)

  http://www.SnapFiles.com/get/DiskDigger.html (try this second - if it does not also the chances of recovery are very slim, but we invite you to try other options if you want)

  http://www.SnapFiles.com/get/easusdfr.html

  http://www.SnapFiles.com/get/restoration.html

  http://www.SnapFiles.com/downloads/Recuva/dlrecuva.html

  http://www.SoftPerfect.com/products/FileRecovery/

  http://techpaul.WordPress.com/2008/06/23/how-to-recover-your-lost-files/

  I hope this helps and I look forward to your reply with the results of the options I suggested, the I asked you to perform checks and questions I asked (and I know there were many, but I'm not here in front of your computer with the disk to try things myself so the only way I'm collecting information that I need help (if possible) is to seek your help for) help me.  Thank you.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Create another data base of Liquibase changelog: automatic data type conversion

  I need to convert the structure of PostgreSQL databases to Oracle. In PostgreSQL, I a postgres database.

  In Oracle, I have an empty database in which I want to write to postgres database in PostgreSQL.

  Actually, I didn't need the data, only the structure (relationships).

  For this, I use Liquibase. I get the changelog of PostgreSQL with the command:

  Liquibase.

  -driver = org.postgresql.Driver.

  --classpath="C:\db_drivers\postgresql-9.3-1102.jdbc3.jar------.

  --changeLogFile="./postgresql_changelog.Xml------.

  -url = "" jdbc:postgresql://localhost:5432 / postgres "\"

  -username = schema_name_here.

  -password = *.

  -logLevel = debug.

  -defaultSchemaName = Ms.

  generateChangeLog

  After that, I try to create objects in the Oracle database:

  
  

  Liquibase

  -driver oracle.jdbc.OracleDriver =

  --classpath="C:\db_drivers\ojdbc14.jar".

  --changeLogFile="./postgresql_changelog.xml".

  --URL="JDBC:Oracle:thin:@ip_here:orabeta".

  -username = *.

  -password = *.

  Update

  Does not work: ORA-00902

  Here is a fragment of postgresql_changelog.xml:

  ...

  < changeSet author = '(generated) Alexey' id = "1409146335011-53" >

  < create table tableName = "TABLE1A" >

  < column name = "total_pk" type = 'INT8' >

  < forced nullable = "false" / >

  < / column >

  < column name = "form_fk" type = 'INT8' >

  < forced nullable = "false" / >

  < / column >

  ...

  I also generate a pure SQL file:

  
  

  Liquibase

  -driver oracle.jdbc.OracleDriver =

  --classpath="C:\db_drivers\ojdbc14.jar".

  --changeLogFile="./postgresql_changelog.xml".

  --URL="JDBC:Oracle:thin:@ip_here:orabeta".

  -username = *.

  -password = *.

  updateSQL > update.sql

  Here is a fragment of update.sql:

  
  

  ...

  CREATE THE TABLE SCHEMA_HERE. TABLE1A (total_pk form_fk INT8 INT8 NOT NULL,.. .etc);

  INSERT INTO SCHEMA_HERE. TABLE1A (ID, $form_id,... etc.)

  ...

  I want to generate the file, in which all the data types correspond to the target database, that is to say I want to create. I can write a simple parser that replace the data types, but this isn't the right solution - can be a lot of data.

  It is possible to get changelog from a database and update another database on a different server this changelog RDBMS? I need to get the automatic and Automatic data type conversion generate XML data / SQL output with the data types of target database.

  Or maybe there is an option to generate output data types with "abstract"? That is to say with data types that are not in the actual databases, for example, instead of INT8 - whole, etc.

  I would be very grateful for the information. Thank you all.

  Why not to use pg_dump to extract the schema in a file of script that you can then 'change '?

• Cannot access the data on the old hard drive - old computer is dead

  I just bought new HP Pavilion a6547c desktop computer.  My old computer doesn't turn on.  Have hard drive in HP Tower.

  Computer recognizes it - are there files - but I can't access it.

  Have fallen by security and attempted to change the property - but get "unable to display current owner" from the old drive.

  I am the owner of the old drive.

  Someone knows how to fix this?

  Hi DebbyO

  Please download and install the fix from the following link.

  http://www.howtogeek.com/downloads/TakeOwnership.zip

  Please check out the TakeOwnership.zip file on the desktop, and then double-click the InstallTakeOwnership.reg file to install it.  Then navigate to the folder that you are trying to access, right-click on the folder and click Take Ownership.

  Now try to access the folder. You should be able to access the folder and view your files.

• Trying to retrieve the RMAN backup in another data base (another physical machine

  Hello!
  
  I am trying to restore to a different machine with a different database. I created the database with the same SID, but the computer name is different from the other. All I wish to recover is the user data file and the main data file that clients use. I could not find the right way to do outside forums. Someone would be able to offer assistance?
  
  I did an INCREMENTAL LEVEL 0 CUMULATIVE database BACKUP; on node 1 and transferred the wallet and backups from node 1 to node 2.
  
  Any help would be appreciated! :)
  
  Thank you!

  but the dbid can be different. This is the error.

  You may need to restore the controfile of these backups first before you can restore files.

  in this case to do that:

  Start the db2 as nomount with your pfile file instance

  then
  RMAN target /;

  RMAN > RESTORE CONTROLFILE 'filename '; -"the file name is backups that you have copied the disk."

  can do the

  backup from the list; If the controlfile is restored then the info should be there already if not then you can make the order of catalog again recovery area.

• I forgot my password to enter my computer, it says: you cannot access the data on this computer without the correct password

  who should I contact to get the password for my laptop

  who should I contact to get the password for my laptop

  Since you set the password, you'd be the only person to get the password. There are actually many options built into Windows to help you out of this situation:

  • Restart the computer with your Windows repair CD, then use system restore to set Windows in a few days (only works if you have recently changed the password).
  • Log on to your account admin to spare, and then reset the password for your existing account (works only if you set up an alternative admin account).
  • Log in as administrator mode without failure, then reset the password for your existing account (the password is usually empty).
  • Insert your flash drive USB with the password key file (only works if you have taken the time to create such a key file).
  • Use the password indicator (works only if you have created a hint and if it's good enough to allow you to guess the password)
  • Check your paper files (works only if you threw down the password somewhere)

• ORA-12705: cannot access files of NLS data or invalid environment specified

  Friends,
  
  I installed content of instantclient-basic-win32 - 11.2.0.1.0.zip and instantclient-sqlplus-win32 - 11.2.0.1.0.zip in C:\instantclient_11_2 on my Windows XP and put C:\instantclient_11_2 in the PATH environment variable.
  
  I use the following sequence of commands to call SQL * more and also establish a remote database session.
  CD C:\instantclient_11_2
  sqlplus/nolog
  CONNECT Username@'hostname:portnumber/SERVICE_HANDLER/SID'
  
  However, I met ' ORA-12705: cannot access NLS data or invalid environment specified files "." Can someone help me with the resolution?
  
  Kind regards
  Raamu M S R K

  I think that this has been discussed in these forums before - use the search function to find the related discussions

  http://forums.Oracle.com/forums/search.jspa?threadID=&q=ora-12705&objid=F190&DateRange=all&userid=&NumResults=15&rankBy=10001

  This link can also help - http://tardate.blogspot.com/2004/07/oracle-instant-client-10102.html

  HTH
  Srini

• Cannot access page Plugin-based PDB (protein Data Base)

  OS: MacOS Yosemite 10.10.3. Cannot access the http://www.callutheran.edu/Academic_P.../lzipmast.htm Web page that uses a plugin of the PDB. I don't know if there are plugins for this format (s?), in FireFox, or anything else besides. Safari reports that "the sype file not specified", so maybe there is a mistake in the Web page itself (humor: "these biologists are sloppy with their microscopes to $5 million and more, but they don't know much about computers..")

  This page has not been modified since before that Firefox is a browser. There is probably a plugin for Internet Explorer v6 that will display that content. But you'll need a computer with Windows XP SP1 which is never updated Internet Explorer, and then find and install the plugin to make it work.

  You can download the file directly, if you want to try to find a program that will open its doors this: http://www.callutheran.edu/Academic_Programs/Departments/BioDev/omm/lzipper/pdbs/lzipdna1.pdb