Cannot access Deskjet 3050 has with Hp Envy M4

I am trying to connect laptop Envy my daughter to a Deskjet 3050 x a M4. I downloaded the x recommended software from the HP driver software and when the software said installation was successful, I chose a recipe to print, but it does not print. I have uninstalled/reinstalled the software and got the same result when you try to print another recipe. There is no other steps mentioned after successful installation. Are other measures, that I should have, as a reboot?


I'm still trying to get my daughter's hand.  She seems to be dragging its feet in front of me.  I'll get a hold of you about the success or failure of the you recommendation

Thanks for responding so quickly.  I only wish that I could have done it same thing

Tags: HP Printers

Similar Questions

  • DeskJet 3050 has with Mac Ibook

    One month there has been no problem with Deskjet 3050 a with Mac Book Pro.  Now cannot print Pages.  Have done all the troubleshooting recommended by HP.  Printer's default; the supplies are good.  The printer is idle.  Have you tried both wireless (that worked before), and now with a usb connection.  Have spent more hours trying to correct.  Problem started with very slow printing - couple of lines, stops and then repeat until the page is done.  Now does not print at all.  Help.

    Hi again!

    I have a few suggestions that will work if everything goes well for the printing problem. Before attempting any software below, please make a copy or two out of the façade of printers to test the equipment. If the copies appear to work correctly, continue with the steps of software!

    1. Mac OS X: how to reset the printing system
    2. Repair disk permissions
    3. Restart the Mac.
    4. Install the driver full features here: HP Deskjet full feature software and drivers - Mac OS X 10.6, OS X 10.7, OS X 10.8

    Try to print from where ever you and also try printing of text editing. Let me know the results!

    Best wishes to you, I hope this helps

  • Cannot get deskjet 3050 has in a j611 series print

    my printer does not print


    Thanks for posting the question on Microsoft community forums. Looks like you can not print using HP Deskjet 3050 has.  Please answer a few questions to refine the question.

    1. do you get an error message?

    2. are you aware of changes to the computer before the show?

    3. what happens when you try to print?

    I suggest you perform the steps described in the article:

    Solve printer problems

    Hope this information helps. Please reply with the status so that we can help you.

  • DeskJet 3050 has J611 all-in-one: Mac cannot connect to the printer using the wireless configuration

    My printer is connected to the same network as my Mac. When you complete the Setup wireless using a USB in system (HP Utility) preferences, a message says: "wireless network settings have been successfully downloaded to your device. However your Mac could not locate the device on the network. »

    I did everything I could: restart the printer. Unplug the printer and reconnected on the network and configuration of try again several times.


    Hey @benjaminllim,

    Welcome to the Forums of HP Support!

    I understand that you have some problems with the connection of your Deskjet 3050 has e-all-in-one printer to your computer Mac OSX 10.11. I can help you with that.

    To start, make sure that the printer is plugged directly into a wall outlet, not a surge protector. Once done:

    1. Turn the printer off:
    2. While the printer is turned off, disconnect the power cable from the back of the router for a minute.
    3. When the lights come back on the router, turn on the printer.
    4. Disable any antivirus, firewall or security of your Mac software.
    5. Try to run the installer.

    Please let me know the results after following the above. If you are able to print to the printer, click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

  • HP Deskjet 3050 has All - in - One J610 series is not compatible with mac os x 10.8 mountain lion. need help.

    Hi I have a HP Deskjet 3050 all-in-One J610 Series a as indicated in the title, and I have the operating system Mac OS x 10.8 Mountain Lion. I need help to get or install the software hp for printing wireless setup in my dorm. Any help is very appreciated.


    I'm not not clear with your exact printer model, it is the printer Deskjet 3050 a (J611) or model 3050 (J610) ?

    For the Deskjet 3050 J610- a complete software not available at this time.

    As there is no comprehensive software available for Mountain Lion, you will need to set up a temporary ad hoc connection and then use the EWS printer to connect the printer to your router.

    • Press the button on the control panel wireless to display the options menu on the screen of the printer wireless.
    • Select on the screen of the printer's wireless settings, then Netowrk default settings.
    • Under the same wireless and select Radio wireless and make sure to put it on.
    • From your Mac, click the WiFi icon and then click on join another network.
    • Click view networks, select the printer SSID, it will include 3050 or J610 in its name, then click on join.
    • Allow 2-3 minutes to establish the connection.
    • Open Safari and click on the favorite icon ().
    • Hello-click and then click on the name of the printer, the EWS page appears.
    • Enter the network tab.
    • Less wireless (802.11) click Wireless Setup Wizard and then click Start the wizard and follow the steps on the screen to configure the wireless connection.
      Note: If you must provide the type of security for your wireless network, you can click the WiFi icon, click Network Preferences and select the Wi - Fi network. Click Advanced, and you will find the type of security for your network in the Wi - Fi tab.
    • Once the wizard of wireless via the integrated Web server configuration is complete, click the Wi - Fi of your Mac and you connect to your router again.

    Finally, go to System Preferences > print & Scan and add the printer. confirm all calls to get the drivers from Apple servers

    For the Deskjet 3050 has (J611), be sure to connect the printer with a USB port and follow the installation below:

    Please let me know of any problems,


  • HP deskjet 3050 a: hp deskjet 3050 has 0xb04021a6 error codes

    At the error code 0xb04021a6 on the screen of the printer at the time wherever you turn it on.

    Have research all day but unable to know what means this error code.

    Hi @e-year-e.

    Thanks for joining the Forums of HP Support for a solution to your printer problem.

    I understand that you have a HP Deskjet 3050 has e-all-in-one printer showing an error code "0xb04021a6" when he is running. I would like to help.

    These error codes are caused by hardware or firmware issues.

    "Here is the document of suppiort designed to be used with this problem - ' 0xc19a0005" or similar error.

    Please let me know if that solves the problem, or if you need assistance.

    Indeed, if this help you to achieve a solution please click the 'accept as Solution' and the 'thumbs up' buttons down below in this message.

    Thank you!

  • DeskJet 3050 a: hp deskjet 3050 has not not red print

    I recently replaced both my cartridges on my Deskjet 3050 has. He had already printed perfectly for the past 2 years.  I checked that they are correct cartridges of real HP purchased from HP.

    I'm on Macbook Pro with OS X Yosemite 10.10.5 version and wireless connection.

    Please can anyone help because it's so frustrating?

    Thanks in advance.


    Hi Martin,

    Try to print a self-test report by selecting settings > reports > Self Test.

    You see the magenta color printed correctly by the equipment?

  • manually clean the printheads for deskjet 3050 has

    DeskJet 3050 a not print not tried red heads ink level four times cleaning is ok and the use of hp ink cartridges

    Hello fred1934,

    Welcome to the Forums of HP Support!

    I see that you can not print red with your Deskjet 3050 has, you ran the print head cleans several times, but it does not help. Try using the manual procedure in this guide: "Incompatible print cartridge" or "Print Cartridge problem" Message appears on the computer or the printer control panel, three Solution.

    Hope this helps,

  • DeskJet 3050 has

    I have a Macbook Pro that I've recently upgraded the operating system of Yosemite (10.10) and have a new Xfinity wireless modem. I can't print using my Deskjet 3050 has.  I must need a new driver. Is there an and where and how can I get it?  Thanks for any info.   Anst

    Hi @anst

    Although there is no full feature software and drivers for your printer that is compatible with 10.10, you can still print and scan to your printer using this operating system.  Please take a look at the following document; Installation of the OS X v10.10 Yosemite of Apple Software Update HP print driver.

    If you continue to have trouble printing or scanning, please let me know and describe the problem in detail, thank you.

  • Why can not install HP DESKJET 3050 has in a series of J611 on my new computor windows 8

    What can I do to make my existing HP DESKJET 3050 has all in one printer to work on my new computer windows J611 series 8 when I put in the disk says it is not compatible in some way?

    Get the updated drivers from HP for Win8:>

    As with all HP printers, the software must be installed before connecting the printer. Installation will then ask you to connect via USB. If you have installed all previous versions, uninstall them first.

    I have this same AIO, and new long pilots work fine.

    SC Tom

  • Example: HP Deskjet 3050 has J11n: my printer Hp3050n used to scan to my applemac

    Until recently my HPDeskjet 3050 has scanned on my mac automatically j11n. It will not now and message scanner is not found. I am completely ignorant about computers. Help, please! Thanks.I could have disabled and now don't know how to connect.

    Hi @Valerie35,

    Welcome to the Forums of HP Support! I see that you are running into some problems of printing and scanning to your HP Deskjet 3050 has, when you try to scan, you get an error message 'not found computer '.

    If you have recently lost the connection between the printer and your network wireless, you have to reconnect using the USB key to the wireless configuration.

    Please go ahead and start troubleshooting here: printer does not maintain the wireless connection

    I hope this helps, let me know the result!

    Thank you

  • Why no driver Deskjet 3050 has 7 can I?

    I'm trying to set up my HP 3050 has on my HP laptop running Win 7.  I assumed that a driver would be available in

    Win 7.   There is no HP Deskjet 3050 has no appropriate driver available.  My disks went in a fire.  What should I do? Thank you for your suggestions.


    Have you checked the site?

    I hope this helps.

  • How to replace ink cartridges hp deskjets 3050 has

    need to replace printers inkjet on hp deskjet 3050

    (new forum HP)

    Welcome to the forum, Griff.

    Your printer has its own website pages - in the section "Troubleshooting > How To ', come the instructions to change the cartridges:

    HP Deskjet 3050 has e-All-in-One Printer - cartridges

    The document includes a video to explain the procedure.

  • HP Deskjet 3050 has J611 series watch in trouble with wireless printing

    Hey there,

    I have just a series of combat a HP Deskjet 3050 printer a J611 and wireless printing to work perfectly. However, for the last week or so is no more.

    The printer is connected to the network, as the result of the wireless network test is proven and it is the same network that the laptop is connected to. I have already uninstalled and reinstalled the software. The wireless light is on and I can see the signal strength and the IP address. However, it still works.

    I also I sent an email to the printer to see if it worked. Initially, I received an automated email saying my printer is not connected to the internet and then printing will be delayed. I didn't touch the printer after that, but about 6 hours later it started to print.
    I also tried to connect the printer with a USB key and configure settings wireless via USB does not work either. The computer cannot find a printer connected to the network. There is no firewall blocking the application or the printer.

    My settings:

    Router broadband wireless ADSL2 + -.
    Huawei EchoLife HG521
    Laptop - Medion Akoya E7214
    32-bit operating system
    Windows 7 Home Premium

    Help with this would be much appreciated! Thank you!


    I doubt disturbed the other printer.  Kaspersky can be a problem, but we're going to explore other things first.

    We will set an IP address of the printer:

    -Print a the front of the printer Network Setup Page. Note the IP address of the printer.
    -Enter the IP address in a browser to reveal the internal settings of the printer.
    -Choose the network tab, then wireless along the left side, then on the IPv4 tab.
    -On this screen, you want to set a manual IP address. You must assign an IP address outside the range that the router sets automatically (called the DHCP range). If you do not know the range, change the last set of numbers (those after the last '.') 250
    -Apply the subnet (unless you know it's different, if so, use it)
    -Enter the IP of your router (on the Page of the Network Config) for the gateway.
    -Enter for the first DNS and for second DNS.
    -Click 'apply '.

    Now, stop the router and printer, start the router, wait, and then start printing.

    After that, you will have to redo 'Add printer' using the new IP address.

  • DeskJet 3050 has errors in the press cannot use alignment

    Hi, I hope you can help.

    I just today inherited a second Deskjet 3050 J611 from a friend a hand. I'm setting up on my system and I have a problem with the alignment page printing.

    My system is Windows 7 64 bit and I have connected the printer wireless to my network. The thought I want to calibrate the printer I ran the alignment, but go looking at the alignment of the mine of the internet pages is decidedly not just. Some lines seem to be missing and the illustration at the end of printing is 'lines' with blank lines. Therefore, the analysis of the alignment fails. I also printed the windows test page and that seems doubtful too with the lines of print with the tops? cut, but some lines are intact. I've included a scan of the print-out of alignment if it helps to diagnose my problem. At least the scannner works!. I can print from my Ipad 3 even if the quality is not good and the same thing with Windows printing, I hope that if I can make the alignment that the seeds will disappear.

    I changed ink for new trucks and installed the latest drivers and software from the HP site.

    Please help if you can.

    In General, this kind of question is cleared up by the replacement of the ink cartridges. Especially with Deskjets and more with have received you second hand, the chances of the cartridge/print head (they are combined) being empty or clogged is very likey. I would as a first step, and if this does not resolve the issue here is a document of support on print quality issues which can also produce some more light on the question you have:

    I hope that helps you out, and if you have any questions do not hesitate to contact me. I will reply to you as soon as I can.

    Have a great day!

Maybe you are looking for