Cannot access internet after downloading 'Software Windows Vista security 2011'

Similar Questions

• Cannot access internet after downloading Adobe Reader.

  original title: why my internet quit working because I downloaded Adobe Reader.

  When I downloaded the adobe reader software troubleshoot my internet stop when I clicked on it said it was because of the adobe reader software.

  Are there other programs on Vista which takes the place of adobe reader?

  Yes. It is called Foxit reader and you can get it here: http://www.foxitsoftware.com/pdf/reader/addons.php visit my website: teengeek.freehostingcloud.com

• Cannot access internet after installing the latest Windows Update

  * Original title: Question access to the internet after you have installed the latest update

  Last week, I installed the latest update of Windows 8, however once installed, I was no longer able to access the internet and became a message saying that the page cannot be displayed. Below it there is a button to click to solve the problem of connection but I did and it came back with no connection problem.

  I reset my router, but there was no question that I could access the internet on my phone and my roommates laptop. The only way that I could access the internet again was to restore my pc and remove install.

  I was then forced to install the update tonight and it's the same thing so I had to uninstall these updates again to access the internet.

  Can you please tell how can I install the update it will affect my ability to access the internet?

  Hi Victoria,.

  Please help me with the following suggestions:

  1. using modern Internet Explorer user interface or Desktop Internet Explorer?
  2. your computer is in a cable or wireless internet connection?

  3. What is the number of the kb article that is causing the problem with the internet after installing the update?

  4. are you referring to Windows Update (KB2919355) 8.1?

  Windows Update: Frequently asked Questions see (how know what are updates
  been installed?)

  http://Windows.Microsoft.com/en-us/Windows-8/Windows-Update-FAQ

  Method 1: After the update is installed, configure the computer to boot and check if you questions persists:

  How to perform a clean boot in Windows

  http://support.Microsoft.com/kb/929135/en-us

  Note: After troubleshooting, consult this section «How to reset the computer to start normally after a boot minimum troubleshooting»

  Method 2: Click on the link below to troubleshoot if the internet explore does not work:

  Why can't connect me to a network?

  http://Windows.Microsoft.com/en-us/Windows/cant-connect-to-network#1TC=Windows-8

  Warning: Reset Internet Explorer settings will not affect your browsing history, unless you check the delete personal settings during the reset. If you want only to view or delete your browsing history, you don't need to reset all the settings of Internet Explorer.

  I hope this helps. Answer please if you have any additional questions with Windows.

• Unable to access Internet Explorer 9 using Windows Vista, Service Pack 2

  I use Vista, Internet 9, desktop pc, cannot connect to Internet Explorer, get the message "Internet Explorer cannot display the webpage."  I click on diagnose connection problems and he says: "Windows cannot find any problems with the network connection on this computer."  Using Netgear and router.  All the lights are on, all connections are secure.  Two of them have reset several times that I care to mention.  I access internet using my wireless laptop or directly related.  Lower right of the screen on the task bar, it shows double computer and Internet Explorer icons.  When I click it, it brings up the network and sharing, and it shows the lines between desktop computer, network 2 (home network) and the Internet. But I can not connect to internet at all of this office.  I could, until what I deleted temporary files, run MS Security Essentials, then defraged.  Help, please!  I am in desperate need!  :-(

  Thank you

  Hello

  Method 1:
  Use the Internet Explorer (No Add-ons) mode, and check if it helps:

  http://Windows.Microsoft.com/en-us/Windows-Vista/Internet-Explorer-Add-ons-frequently-asked-questions

  Method 2:
  I also suggest you to consult the Knowledge Base article and check if it helps:
  http://support.Microsoft.com/kb/956196

  Method 3:
  Check if you are able to ping Web sites. You can try the following steps:
  a. click on the Windows "Start" button, then select the 'Run' utility in the start menu.

  b. Enter the following command in the field 'Open', then click 'OK ':
  cmd

  Command prompt opens in a separate window.

  c. Type "ping" followed by the URL of the Web site, you are trying to ping. You must leave a space between the 'ping' and the URL.

  For example, ping Yahoo.com, enter the following command:

  Ping www.yahoo.com

  d. apply the command by pressing the key "Enter" on the keyboard. You should see the information on statistics for the address ping IP is entered, including the number of packets sent, received or lost.

  If there is no packet lost, your Internet connection is working normally. However, if there are packages that are lost, you may have a problem with your Internet connection.

• Cannot access internet after turning off the computer during the update

  original title: computer problems

  After windows has been a configuration that we couldn't not get out of the loop from 0% for my daughter close, now it used to connect to the internet, and when we try to watch whatever it is to diagnose why it freezes just straight up

  Try a system restore to a Date before the problem began:

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  http://www.windowsvistauserguide.com/system_restore.htm

  Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

  See you soon.

  Mick Murphy - Microsoft partner

• Cannot access files after using recovery system (vista)

  Recently, I had some problems with the computer and had to consider having a new video put card in and done a system recovery.  I saved all the photos, documents, music, etc. on discs and did the work.  When I got the computer home, I loaded the discs on the computer and appears on the desktop a shortcut to a system recovery.  Unfortuantely, I'm unable to access all of the files.  I get an error of media player, my photos, say, I don't have permission to open, my documents will not be open.  I am the only user on this computer.  I am admin on it.  I have no idea how to make files to open and I really need to get them into a large number of them that relates to the work.  What should I do?

  Hi GypsyMama,

  You may need to take ownership of the files, and then try to open them.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-access-denied-when-opening-files-or-folders

  I hope this helps.

  Bindu S - Microsoft Support

  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• Cannot access Internet after installing the latest Windows updates

  Hello

  updated the last windows update and now can not access the internet even if I said I'm on internal appreciate any help in this matter.

  Have reset the laptop to an earlier date and no problem, but as soon as I download the update of windows, no internet access

  " Original title: blocked internet access"

  Hi Eugene,

  Thanks for posting your query in Microsoft Community.

  I imagine the inconvenience that you are experiencing and will certainly help you in the right direction to solve the problem. However, I would be grateful if you could answer a few questions to refine the question in order to provide you with better assistance.

  1. What is the type of internet connection you use - wired or wireless?
  2. Do you get any error message when there is no internet access?
  3. What is the number of KB of the update, after which the internet disconnects?

  [To view your history of update:]
  a. Open Windows Update by sliding into the right edge of the screen (or, if you are using a mouse, pointing to the corner bottom right of the screen, move the mouse upward), touching or clicking on parameters, typing or clicking on Change PC, then type or by clicking on update and recovery.
  [ b. press or click on see your update history.]

  The question could arise if the specific update makes changes in the Windows network properties and the update package has been damaged. Other important reasons include the firewall from the security software, third-party software conflicts etc.

  In order to diagnose the problem, I would suggest trying the following methods and check if the problem persists.

  Method 1:

  Method 1: Troubleshooting of connection Internet run.

  a. press the Windows key + W key on the keyboard.

  b. type Troubleshooting in the "search" tab and press enter.

  c. click show all on the left panel.

  d. click on Internet connection, will new popup window.

  e. follow the instructions on the screen.

   

  Let us know the results performing the Troubleshoot utility.

  Method 2:

  Reset the DNS and TCP/IP settings.

  1. Press the Windows key + X.
  2. Click prompt (Admin).
  3. Please enter the following commands and press ENTER after each one.
     NETSH INT IP RESET
     IPCONFIG/FLUSHDNS

  Restart the computer to check the issue.

  If the problem persists, refer to the following method.

  Method 3:

  Temporarily disable the security software and check if it helps.

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most

  cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Additional information:

  Windows wireless and wired network connection problems

  Hope this information is useful. Let us know if you need more help, we will be happy to help you.

• Cannot access internet after upgrade to version 3.0 and Windows 7

  I went through the complete upgrade of the merger of the VM (to 3.0) and Windows (from XP to 7) and it was not without problems (mainly memory), I finally got to work. And it works very well, much more quickly than VMF2/XP, with one important exception: I can't connect to the internet via my wifi network.

  I tried all different network settings in VMware Fusion, and he always says that I'm connected (virtual machine / / network cards / / parameters). However, when I try to actually access the net, it does not find the network and none of the 'troubleshooting' tools help me.

  I'm a bit frustrated because Windows 7 works fine in VMware Fusion 3.0 with the above exception.

  Any ideas?

  THX

  It is possible, that you must change the type of operating system, and then remove the network card curent and then add another.

  To change the type of OS, go to the Menu bar > VM > settings

  On the left side there is a drop down... Make sure that it matches the version of windows that you have (Windows 7, 32-bit or 64-bit)

  Then go to the network pane, select the virtual NETWORK card on the left and remove it by clicking on the '-'.  Then, simply click the '+' to add a new.

• Cannot access Internet after SP3

  I have reviewed many articles and comments related questions related to XP SP3, but I hope someone can shortened my troubleshooting a bit.

  I'm running an old eMachine (T6520 in) with an AMD Athlon 64 processor.  The OS is XP version 2002 with Service Pack 3 GUY.  I had a few problems with this computer associated with certain system programs does not, the most obvious being the restoration of the system.  I recently posted on this site for more help with the missing files are restored, but have not yet had the chance to solve this issue.  I don't like so much about this, so I can access the internet, which will be the main use of this computer.

  Everything worked ok, until I installed SP3, after which I was unable to access the internet.  I tried to uninstall SP3, but keep a mistake related to a missing file.  I was about to do a full restore of the system from CD, but then I restarted in mode safe mode "with networking" and was able to access the internet.  This makes me think there is some kind of security setting preventing me access to internet.  I disabled temporarily my Windows Firewall to see if it helped, but not luck.

  I'm under IE7 (also struggled to access the internet when I installed IE8).  I have a Netgear USB wireless adapter.  Let me know if there is anything you need.

  Thanks in advance for the help.

  Todd

  Hello

  Look at the startup folder and try to find if there is something loading at startup that might explain this problem.

  Try this free utility to do this, http://www.ezlan.net/infestation.html#startup

  Otherwise, use this process to try to find what is worng with the wireless.

  http://www.ezlan.NET/wireless.html

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• Cannot access internet after Win XP suspend molten v4

  With the help of Fusion v4.1.1 on OS X v10.7.2 with Win Xp Pro SP3 guest.

  When the customer is suspended and then re-enabled, internet connection still shows as connected, but can no longer access the internet. I have to restart Win XP and then it can access the internet again very well.

  Thank you

  There are several command-line utilities, VB Script methods, etc. of PowerShell. It is more of a general scenario of Windows and you should be able to Google it and find enough information to build your own script.  If I had some time right now I throw something together, but I have to last-minute holiday shopping to do and only have a bit of free time after Jan 1.

  I used DevCon in the past to create a simple. CMD Script to do this.

  Take a look at: functions of the utility DevCon tea as an alternative to Device Manager

• HP officejet pro 8600 more - cannot access internet after several hours

  HP officejet pro 8600-after that I re-boot, I can access the internet for several hours, but after awhile, I cling on websites, I try to go to. If I unplug the printer and restarting, I accecss all websites all the time. I thought iwas hooked on a scan (which was never initiated by me), but I'm not sure. Any suggestions? I'm running on a Dell XP laptop.

  Thankx

  Hello

  Please visit the link below to fix the problem.

  http://support.HP.com/us-en/document/c03149924

• Satellite C660-125 - cannot access BIOS after upgrade to Windows 10

  Hello, I just upgraded to 10 Windows Home of Windows 7 and now HWSETUP. EXE is not running and when restart the laptop I can't enter the BIOS with F2 or F12. Can someone companion please? Kind regards

  You must install the driver from Toshiba for Windows 10 system.
  However the C660 does not seem to be in the supported list, you may need to go into BIOS instead.

  Hold SHIFT key during shutdown to shut down Windows hybrid suspension mode. Keep now SHIFT until the power goes out.
  The BIOS F2 message appears only if the laptop is a cold start.

• Cannot install update Cumulative security for Internet Explorer 9 under Windows Vista (KB2792100)

  Original title: update KB2792100

  My computer has been tyrying updated Cumulative Seci = security update for Internet Explorer 9 for windows vista for over a month now and it says it fails every time.  Any ideas?

  Hi Jeanlavanway,

  Thanks for posting your question in the Microsoft Community.

  From descriptions of the question, it seems you cannot install update Cumulative security for Internet Explorer 9 under Windows Vista (KB2792100).

  I imagine the inconvenience that you are experiencing. I'll help you fix the problem.

   

  To help you solve the problem, I would appreciate if you could answer the following question:

  1. you receive an error code or message?

  2 is the issue specific to some or all of the updates?

  3. have you made any recent hardware or exchange of software on your computer before the show?

  Please follow the methods and mark the question below:

  Method 1:

  Follow the steps in the link below.

   

  Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2:

  http://support.Microsoft.com/kb/2509997

  Warning: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up the registry, click on the number below to view the article in the Microsoft Knowledge Base:

   

  http://windows.microsoft.com/en-US/windows-vista/Back-up-the-registry.

   

  Important: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

  Method 2:

  I suggest you to install updates and check manually.

  MS13-009: for Internet Explorer Cumulative security update: February 12, 2013:

  http://support.Microsoft.com/kb/2792100

   

  A security update cumulative for Internet Explorer 9 on Windows Vista (KB2792100):

  http://www.Microsoft.com/en-in/Download/details.aspx?ID=36601

   

   

  I hope that the information above helps you.

  Your response is very important for us to ensure a proper resolution.

  In the future if you fall on any question relating to Windows, please do not hesitate to post your request here on Microsoft Community, we will be more than happy to help you.

   

   

• Problems with upgrades to ie9 - cannot install KB2530548 - a security update Cumulative for Internet Explorer 9 for Windows Vista

  I can not install the patch update Cumulative security for Internet Explorer 9 for Windows Vista (KB2530548).  I am running Vista Home Premium.  I tried to remove and reinstall .net framework and finally attempted to unistal ie9.  Not only it did not work but since try, I have updated Security Essentials caraa.  I am also unable to install the update for Windows Vista (KB2533623).

  This issue coincides with Ecel who stops working and I uninstalled Office 2007 Professional.

  Can someone help me (to uninstall ie9 or install the update that links my computer every day)?  I tried twice to unistal ie9 and whenever I restart the nachine it shows that ie9 has just been installed.

  Hello

  ·         Have what measures you tried to uninstall Internet Explorer 9?

  ·         What is the accurate and complete error message?

  I suggest you follow the steps below:

  Check which version of Internet Explorer is currently installed on your computer follow these steps in the link:

  http://Windows.Microsoft.com/en-us/Windows-Vista/find-out-which-version-of-Internet-Explorer-youre-using

  Method 1:

  Download and install updates manually follow the link to download updates:

  If you are using Internet Explorer 8 and then, I suggest you to download and install 2530548 KB

  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=26246

  Note: this above KB is applicable to Internet Explorer 8.

  For Ko 2533623

  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=26757

  Method 2:

  Not one:

  Windows open day convenience store, follow the steps in the link below:

  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Update-Troubleshooter

  Step b:

  Follow the steps described in the article below solve the problems with the installation of the updates:

  http://Windows.Microsoft.com/en-us/Windows7/troubleshoot-problems-with-installing-updates

  Refer to the link mentioned below to uninstall Internet Explorer 9:

  http://Windows.Microsoft.com/en-us/Windows7/how-do-i-install-or-uninstall-Internet-Explorer-9

• legality of the use of vista software to another computer after upgade to windows vista

  legality of the use of vista software to another computer after upgade from vista to windowslegality the software vista to another computer after upgade to windowslegality vista software vista to another computer after upgade to windows vista

  legality of the use of vista software to another computer after upgade from vista to windowslegality the software vista to another computer after upgade to windowslegality vista software vista to another computer after upgade to windows vista

  Hey rjmhhar

  If you use a license of operating system vista as part of an upgrade, it is related to the new upgrade license

  You can use it NOT then install vista on another computer when it is used in the installation as part of this upgrade

  Walter, the time zone traveller