Cannot access Internet. It says I'm connected but will not display web pages.

Similar Questions

• WMP110v2 network connection, but do not open web pages

  I have a Dell 2 GB of Ram and XP PC with the latest service packs and updates. No apparent reason, I had a little difficulty with the installation but after only two tests, but I the WMP110 to properly install and connect to my wireless connection. I use a D - Link Wireless Router N DIR-615 and my other wireless devices are running smooth.

  My problem is that my wireless connection will not go to the internet and I tried to use the Linksys monitor, but also Windows network utilities to check the problem and run the wireless but not connect me. The Web page tries to load, but then ends with the screen 'diagnose connection '.

  I think it will be easy but don't have yet to see a post explaining this problem and I don't know what to try next. Any help would be appreciated.

  Thank you for your interest in Klatch - I got it working well. As the biggest computer frustration usually boils down to a few clicks. For those who have the same problem, here is what has held back me.

  Until I'm able to get a connection I had to find some time to figure out how. Until I went in: WIFI - right click on the wireless connection, and then select PROPERTIES - click on the tab that says WIRELESS NETWORK -, PROPERTY - and then, AUTHENTICATION - once you see a checkbox indicating "authentication enable 802. 1 x for this computer"- UNCHECK this box. You will be able to connect to the wireless network.

  Then, my next problem and the reason for this post was that my network is connected, but I could not display web pages. This solution is buried in the manual on the CD itself. To resolve this issue, you must go into the DEVICE MANAGER to view the Linksys WMP110 under network adapters. Click on in the driver, then go to the ADVANCED tab. Here, you will see a list. You will need to click on the NETWORK TYPE. You should see two types of networks that you can select. The default value for mine was INFRASTRUCTURE. I had deselect this and select AD-HOC instead. My web pages now appear quickly, and I can browse the internet with wireless only!

  My setup is a N D - Link DIR-615 wireless router. I run Windows XP Home Edition on a Dell system. My type of security is WEP.

  Hope this info may help others.

• image acquisition, it says it is allowed, but will not download without watermark

  image acquisition, it says it is allowed, but will not download without watermark

  Follow these steps in the screenshots in this post: I downloaded my 10 free images and they all have the Adobe watermark on them, so I can't use them. Why do they have a watermark on them?

• Watch WiFi is connected but will not connect to internet

  I have an iPad 2 which, all of a sudden (in the Middle streaming), is more connected to the internet.  I rest the network settings, when this does not work, I have reset all settings, stopped and rebooted, all done basically.  It shows that its connected to my WiFi, but will not connect to internet.  All the other devices in my house work, then there must be a problem with the iPad.

  Reset the router: just pull the power for a few seconds and reconnect. No parameter to get lost.  Other devices operating with success is not serious. The router has probably received an invalid address for the iPad.

• WAG54GS allows wireless clients to connect but will not assign IP addresses for full connectivity

  I have three XP 3 computers connected between them in a MS home network via a wired hub and access to the internet through a wired connection to a router WAG54GS.  DHCP is enabled on the router, the IP addresses are correctly assigned and internet access to these computers Wired is not a problem.

  In the past, I've connected also with success of laptops to the internet via the feature wireless router, but having not used that for a while, I think now it will not work.  I tried to connect with laptop computers running XP 2 and Vista Home and the problem is the same.  Laptops find broadcasting wireless router and connect but they are not assigned IP addresses during the phase of "Acquiring IP address" resulting in a "Limited or no connectivity message."  Packets are sent to the router, but none are received in return. It is with the strength of the Signal at 73% and the quality of the link to 100%.  Ipconfig displays no deafult assigned gateway and the IP auto configured to be 169.254.96.1 for example.  Ping the router gives "Destination host unreachable".  Not surprisingly, laptops are able to 'see' other computers wired on the MS. network  These laptops connect correctly to the MS network and internet if I change the wired connection.

  If I check the status of the network wireless router configuration good laptops MAC addresses are displayed, but the computer name and the IP address are missing.  I usually use a protection WEP 128 bit on two channels 6 and 13, but it makes no difference if I change this without guarantee, once again the connection occurs, but no IP address is assigned.  DHCP is enabled in the tab for basic configuration of router from 192.168.1.100 with selected up to 50 users DHCP (and DHCP works very well for cable customers).  The IP address of the router is set to 192.168.1.2.  Wi - Fi router is set to "allow everything".  Default settings are used for the parameters wireless advanced, although I tried to reduce the 100 interbval tag at 50 and the RTS and Fragmentation threshold to 2304.  The policy of Internet access on the router is disabled.

  If I have (for purposes of testing only) connect laptops to one of my neighbors secure networks (there are several) to connect laptops very well so I can access the internet, DHCP works great on laptops.  Firmware is v1.00.08 (I looked this modernization, but while I can identify my router version 1.2 downloads talk about types of Annex A and Annex B are mutually exclusive and I'm not clear I have.  I am also doubtful as to if the firmware upgrade would make a difference, because there is no trace of the upgrade solve this kind of problem and I had the Wireless does not work if long ago).  I'm running out of ideas, is there something that I missed?

  Well in this case you can try to upgrade the firmware of your router, go to the website http://www.linksysbycisco.com/UK/en/support/WAG54GS/download...insert of your router model serach tab... select the correct version of your router... Download the firmware file... save this file on the desktop.

  Follow these steps to upgrade the firmware of the device: -.
  Open a page in Internet Explorer browser on a computer hard wired to the router...
  In the address bar type - 192.168.1.1... Leave the name blank username & password use admin lowercase...
  Click the 'Administration' tab - then click on the 'Upgrade Firmware' under the tab-here, click on 'Browse' and navigate the .bin firmware file and click on "Upgrade"...
  Wait a few seconds until it shows that "the update is successful," after the upgrade of the firmware, click on "Reboot" and you will be returned to the same page OR it will say 'cannot display the Page.

  Now reset your router:
  Press and hold the button of reset for 30 seconds... Release the reset button... Unplug the power cable from your router, wait 30 seconds and reconnect the power cable... Now re - configure your router...

  Once you re-configured settings of your router, and you are able to go online Wired computer, here are some settings that you can configure your wireless router, I think this might solve your problem

  Open an Internet Explorer browser on your computer (desktop) wired page. In the address bar type - 192.168.1.1
  Let the empty user name & password use admin lowercase...
  For wireless settings, follow these steps: -.
  Click on the Wireless tab
  -Here, select manual configuration... Wireless network mode must be mixed...
  -Provide a unique name in the name box of the wireless network (SSID) in order to differentiate your network from your network of neighbors...

  -Set the Standard - 20 MHz Radio band and change the Standard channel to 11-2, 462 GHz... Wireless SSID broadcast should be enabled and then click on save settings...
  Please take note of the name of the wireless network (SSID) because it's the network identifier...
  For wireless security: -.
  Click the sub-tab under wireless > Wireless Security...
  Change the mode of WEP wireless security, encryption must be 64-bit. Let the empty password, do not type in anything... Under type of WEP Key 1 in all 10 numbers please (numbers only and no mailbox for example: your 10-digit phone number) and click on save settings... Please note the 1 WEP key as it comes to the security key for the wireless network...

  Click the settings advanced wireless
  Change the interval of tag to 75 > change the Fragmentation threshold to 2304, change the RTS threshold to 2304 > click 'save settings '...
  Now let's see if you can locate your wireless network and try to connect... And check if you are able to navigate.

• Internet explorer 8 can not display web page

  "I have a brand spankin' new Windows 7 laptop with internet explore 8 w / 3 GB ram, 250 GB HARD drive, processor intel dual core so I guess it should be fast enough, but sometimes it is not when I try to connect it tells me," cannot display web page.

  http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/threads

  They will help you with your question IE in Forum Internet Explorer above.

  For any question on Windows 7:

  http://social.answers.Microsoft.com/forums/en-us/category/Windows7

  Link above is Windows 7 Forum for questions on Windows 7.

  Windows 7 questions should be directed to the it.

  You are in the Vista Forums.

  See you soon.

  Mick Murphy - Microsoft partner

• printer cannot print photosmart c5780; says I'm offline, but am not

  having installed and uninstalled printer several times;   Cannot print; Sometimes, he says I am not online, but I'm not...

  Hello

  1. don't you make changes to the computer until the problem occurred?

  I suggest you try the steps from the link below and check if it helps.

  Method 1:

  See the link below and run them the fixit tool available, check if it helps.

  Problems printing and printing errors:

  http://support.Microsoft.com/mats/printing_problems/

  Method 2: Check that your printer is online by following the steps below.

  a. open the start menu, click Control Panel, and click on the "printers and faxes". This will open a window with a list of the printers currently installed on your computer.
  b. double-click the icon of the printer that you want to change online. It will open a pop-up window describing all current print jobs.
  c. go to "Printer" in the menu bar of the pop-up window and uncheck "Use printer offline." This action will change the printer from offline to online mode.

  Method 3: If the problem persists, then try to run the fix it from the link below.

  http://support.Microsoft.com/kb/2027593

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base.
  How to back up and restore the registry in Windows

  For your reference: Printer in Windows problems:

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Hope this information is useful.

• PC see Droid when connected but will not have access

  When I connect the droid to PC is the new player - when I try to access a message appears "insert a disk in the removable drive.

  any thoughts? Thank you...

  You have to mount your droid.

  After that you connect it to your PC, your sweater Droid of notifications to the bottom of the screen will tell you its connected to USB. Tap the notification and you will be asked to assemble. Answer Yes. You can view all files of the Droid. From here you can also drag files of music in there. It supports virtually all formats of music... MP3, etc...

• HP Photosmart C5180 printer range: computer says it is printing, but will not be printed

  My printer was working fine until yesterday. The display shows 'printing', but nothing happens. I tried to turn it works, made sure I've had connections in place and give him a rest from one day to the next, but she still does not print. Thank you for your suggestions you have!

  Welcome to the HP community @fondyia,

  I read on how your Photosmart C5180 is no longer printing from your PC running Windows 10, and I want to help you get this resolved!

  I suggest first trying the steps described in this guide:

  • HP printers - printer 'offline' status message (Windows 10)

  Tip: Make sure that the printer is plugged directly into the wall, avoiding bars power and surge protectors. This ensures that the printer is full on.

  When you are finished, please let me know the result. If there are printing problems that are still visible, try to make a copy of the printer and tell me what's happening! If you see errors, made me know what they say, if you please!

  (Please try to print from more than one program on your PC)

  If one of my suggestions, helped to reach a solution, I ask you to click on the button "Accept as Solution" please and thank you!

  If you want to send me a 'thanks' for my answer to help today, click on the thumb to the top slot

  

• Connected, but can not visit Web sites

  Hello everyone

  I have a problem that started last night and I don't know what to do, and I'd be happy if someone here could help me on what to do, because I'm not very good at that sort of thing

  So basically, the problem is that I have internet and im using it via Wi - Fi to my router, but for some reason any I can visit only Google, Facebook, Youtube, and other sites, I can't even open. I tried on my iPhone and it is the same problem after my whole family is having the same problem with their laptops and the fact... I tried a few guides I found but nothing seems to work. The problem with my router or I have a virus. If some can give me some advice, how can I fix it, I'll be very grateful.

  Thank you

  Try restarting your router.

• Cannot access internet sites - Satellite A30-92

  I have a laptop Satellite A30 - 92.

  Suddenly I'm unable to access most of the internet sites. Can I use it fine at high speed and on the LAN, but using the dial up, no.
  I can dial my ISP very well, but it will not download web page. Oddly enough I can get some (but very few sites), but above all no that I looked at the Device Manager and the modem works fine. Looking at the ports I have a ltp printer port, but no com port doesn't appear.

  This could be the cause and how to fix? Thank you.
  I must say I checked the firewall and even turned off.

  Must the connection by modem specific DNS and Proxy settings? Call them and find out.

  If you are using IE, try to disable Protected Mode.

  Or maybe just try another browser such as FireFox.

• My computer says I am connected but my internet says cannot display this Web page

  Vista connection problem

  I have windows vista Home premium. my computer says I AM connected but my internet says cannot display this Web page. This isn't the site because I tried other websites

  Hello, Scottyookiss00,

  Launch IE without Add-ons

  Start > type Internet Explorer

  Select Internet Explorer (No Add-ons)

  You are able to access the site now?

  If so, reactivate the modules one by one to determine the origin of the problem.

  Try the steps here:

  http://support.Microsoft.com/kb/956196

• Users cannot access internet when connected VPN

  Hello

  I have users located outside the United States than VPN for our system. Once connected, they get an address from the pool designated for them. However, they are unable to connect to internet when connected. I don't want to use split-mining because some of the sites they connect to will not work properly because their address IP is located outside the United States. I tried both without client anyconnect and vpn client version

  Hi, this link might help you:

  http://www.Cisco.com/en/us/products/ps6120/products_configuration_example09186a00805734ae.shtml

  HTH

  Ingo

• I cannot access internet Windows XP.

  Hello

  My name is Tommy and I need help. My desktop computer shows that it is connected to the internet, but when I try to use any application that requires the internet (IE, firefox, chrome, League of legends, etc..) I get a 'connection error' / Web page isn't reachable. Internet works on my parents and my sisters computer, so I don't think it's a problem with the router (even if they're using wifi). My firewall will not turn on either. I tried a reset winsock, but to no avail.  I ran a few antivirus scans and eventually find a sitting trojan.muldrop in my System Volume Information folder, and I deleted it with by Dr.Web CureIt. After the removal of the virus, my computer will still not access the internet, and I can't turn on my firewall. Please help if possible!
  Thank you!

  Original title: my computer says it is connected but cannot access the internet.

  Hi Tommy,.

   

  Please contact the Microsoft Community.

   

  I would have you look at the article-

  How can I reset the default Hosts file?

  http://support.Microsoft.com/kb/972034

  Do get back to us and let us know. We will be happy to help you.

  Thank you.

• Error "Cannot display Web page" when the wireless internet access.

  Original title: dubious connection

  seriously, my internet connection Wireless plays up.

  It works fine on my laptop, but on my desktop it will work well for maybe a few minutes and then all of a sudden that take forever to load pages or just say 'cannot display Web page' and that will be the end of it. Also says that I'm connected to the internet and internet access. I have done all troubleshooting, clean boot, disable the antivirus/firewall, reset tcp/ip stack, network troubleshooting, nothing is. It works for two minutes then boom, slow as a snail and then not working. If I disconnect my wireless network and reconnect it seems working again for a few minutes then slow again. Very frustrating, any advice appreciated

  This has only started happening last week?  You have McAfee on your desktop PC?

  If so,.

  See the communication from this "criticism" - McAfee

  Some customers may experience a loss of network connectivity and/or errors in McAfee Security Center after a recent update

  You should make the fix McAfee, if necessary. There are corresponding communications for their enterprise products.

  I had to run the removal of McAfee Development tool, they mention a few times before and it caused a problem with the license if the PC was not connected to the internet during the abduction. Due cat of McAfee support reset their files in order to allow the relocation-reactivation. Here is their link cat - McAfee - media contains the link to the cat

  - - - - - -

  I got McAfee, but the connection has started working again on its own so I thought I was clear of problems. However, when I checked it says he was doing routine checks the updates in vain when I told it to do a manually. So stick with McAfee you don't follow their procedure of fix would have upgraded my PC at risk by not updated and, like other McAfee ads have since explained, the application did not refer to its database of threats correctly [and this could explain part of the variability of the symptoms of failure but all involved loss of internet connection]. Actually, I removed McAfee then installed Microsoft Security Essentials rather & my answer IE is faster I knew it [even though I had the Add-ons McAfee disabled for centuries].