Cannot access planning applications after you have added the calculation Manager

Similar Questions

• Windows 8 cannot connect to the external hard drive after you have added the drive case.

  Original title: I have my hard drive from my previous PC attached to my new PC with windows 8. My old PC had XP. How to access the external hard drive?

  I had problems with my XP operating system and could not transfer all the files to my new PC. I spoke with Dell who I believe created the problem with software support. I was told to get out the hard drive, buy a hard drive enclosure and get my files from there. I can't find the hard drive.

  Hello

  Thank you for the update.

  Given that the problem occurs when the hard drive is connected to a different USB port or another computer, it is probably related to the connection of the hard disk.

  Method 1: check if the problem occurs in another computer after removing the hard disk enclosure.

  Method 2:

   

  Step 1: Check if the hard drive is detected in Windows Explorer.

  To do this, follow these steps:

  a. connect the hard disk of the computer.

  b. press the Windows key + E to open Windows Explorer.

  c. check if the hard drive is present here.

  Step 2: Check if the hard drive is detected in disk management.

  To do this, follow these steps:

  a. on the desktop, press the Windows key + X , and then select disk management.

  b. check if the hard drive is listed there.

  Contact the manufacturer of the hard drive and hard drive enclosure for assistance.

  http://www.Seagate.com/support/

  Please get back to us if you have any other questions about Windows operating systems. We are happy to help you.

• Cannot start Bootcamp, after you have added the partition using disk utility

  My question is similar with repair Boot Camp after having created the new partition.

  recently I install the el capitan + windows 7 (using bootcamp), everything works fine after I add the third partition. (I anticipate the third partition will be use for dropbox, for mac and windows can sync-ing a dropbox for each folder).

  After I've done the third partition and restart the system, I want OPTION and found no windows.

  My mbp spec:

  MD101 2012 13 ",

  SAMSUNG 850 PRO SSD 256GO,.

  16 GB RAM,

  elcapitan OS x + windows 7 ultimate.

  Thank you

  Can you post the output of the following commands in OSX Terminal?

  diskutil list

  Cs diskutil list

  sudo TPG - vv - r see the/dev/disk0

  sudo fdisk/dev/disk0

  The "sudo" commands will prompt to enter your password, and there do not appear to come back. You can also see caution against improper use 'sudo' and the potential loss of data due to an "abuse" of the order.

• error on the console after you have added the second vSwitch.

  Hello

  the message on the console appears after:

  I added second virtual switch with vmkernel and service and storage console by declaring open to esx.

  What has happened and what needs to be done to solve this problem?

  The interesting part that it keeps me not to access esx http://192.168.1.2 even on console, it displays 0.0.0.0 (this machine)?

  Note: this is a laboratory configuration.

  Hello

  Yes, in WS and Yes, I would add to the team. I have in my team 2 ESX, OF Smoothwall Firewall and W2K3 servers for vCenter.

  Best regards

  Edward L. Haletky

  VMware communities user moderator

  ====

  Author of the book "VMWare ESX Server in the enterprise: planning and securing virtualization servers, Copyright 2008 Pearson Education.»

  Blue gears and SearchVMware Pro Articles: http://www.astroarch.com/wiki/index.php/Blog_Roll

  Security Virtualization top of page links: http://www.astroarch.com/wiki/index.php/Top_Virtualization_Security_Links

• After you have added the R1211 node. Pointing to the 2nd node Web entry

  Hi, Experts,

  I add new application node (12.1.1) in according to metalink doc. The cloning procedure went well. The problem I get is after you add the new node. Web writing is oriented to the second node.

  Cloning of Oracle version 12 with rapid Clone Applications (Doc ID 406982.1).

  
  

  My setup is as below.

  
  

  1 - Appsn1 (services of all running applications)

  2 - Appsn2 (services of all running applications)

  3 - OraN1 (data services)
  

  
  

  Please let me know if I'm missing something.

  
  

  Kind regards

  
  

  USAF
  

  Please, try the following:

  -Stop the application services on both nodes

  -Start AutoConfig on the node that you just added and make sure that it ends successfully

  -Start AutoConfig on the head node and make sure that it ends successfully

  -Start the application services on both nodes

  -Then check

  Several Application nodes configured without load balancer Cause Login Redirection (Doc ID 1362885.1)

  Thank you

  Hussein

• Integrated WebLogic fails to start after you have added the security provider

  Hello

  I'm new in the adf and weblogic. I use weblogic built-in jdev 12 c 12.1.2.

  I set up the security in my weblogic using this blog.

  http://adfgouravtkiet.blogspot.com/2012/07/Configuring-ADF-security-using-database.html

  It is configured successfully. But after you configure when I restart my weblogic server, it will fail to start. This is stack strace.

  < 16 April 2014 17:46:33 hours CEST > < error > < security > < BEA-090870 > < the domain 'myrealm' could not be loaded: weblogic.security.service.SecurityServiceException: com.bea.common.engine.ServiceInitializationException: java.lang.NullPointerException.

  weblogic.security.service.SecurityServiceException: com.bea.common.engine.ServiceInitializationException: java.lang.NullPointerException

  at weblogic.security.service.CSSWLSDelegateImpl.initializeServiceEngine(CSSWLSDelegateImpl.java:341)

  at weblogic.security.service.CSSWLSDelegateImpl.initialize(CSSWLSDelegateImpl.java:220)

  at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.InitializeServiceEngine(CommonSecurityServiceManagerDelegateImpl.java:1812)

  at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initializeRealm(CommonSecurityServiceManagerDelegateImpl.java:447)

  at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.loadRealm(CommonSecurityServiceManagerDelegateImpl.java:845)

  Truncated. check the log file full stacktrace

  Caused by: com.bea.common.engine.ServiceInitializationException: java.lang.NullPointerException

  at com.bea.common.engine.internal.ServiceEngineImpl.findOrStartService(ServiceEngineImpl.java:365)

  at com.bea.common.engine.internal.ServiceEngineImpl.findOrStartService(ServiceEngineImpl.java:315)

  at com.bea.common.engine.internal.ServiceEngineImpl.lookupService(ServiceEngineImpl.java:257)

  at com.bea.common.engine.internal.ServicesImpl.getService(ServicesImpl.java:72)

  at weblogic.security.service.internal.WLSIdentityServiceImpl.initialize(WLSIdentityServiceImpl.java:46)

  Truncated. check the log file full stacktrace

  Caused by: java.lang.NullPointerException

  at weblogic.security.providers.authentication.shared.DBMSUtils.verifyHashAlgorithmUsable(DBMSUtils.java:43)

  at weblogic.security.providers.authentication.DBMSSQLAuthenticatorDelegateImpl.validateConfiguration(DBMSSQLAuthenticatorDelegateImpl.java:167)

  to weblogic.security.providers.authentication.DBMSSQLAuthenticatorDelegateImpl. < init > (DBMSSQLAuthenticatorDelegateImpl.java:77)

  at weblogic.security.providers.authentication.DBMSAuthenticatorDelegateImpl.getInstance(DBMSAuthenticatorDelegateImpl.java:459)

  at weblogic.security.providers.authentication.DBMSSQLAuthenticationProviderImpl.initialize(DBMSSQLAuthenticationProviderImpl.java:55)

  Truncated. check the log file full stacktrace

  >

  < 16 April 2014 17:46:33 hours CEST > < opinion > < security > < BEA-090082 > < security initialization using security realm myrealm. >

  < 16 April 2014 17:46:33 hours CEST > < critical > < WebLogicServer > < BEA-000362 > < server failed. Reason:

  There are 1 nested errors:

  weblogic.security.service.SecurityServiceRuntimeException: security services [Security: 090399] not available

  at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.doBootAuthorization(CommonSecurityServiceManagerDelegateImpl.java:921)

  at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1058)

  at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:873)

  at weblogic.security.SecurityService.start(SecurityService.java:148)

  at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)

  at weblogic.work.ExecuteThread.execute(ExecuteThread.java:295)

  at weblogic.work.ExecuteThread.run(ExecuteThread.java:254)

  >

  < 16 April 2014 17:46:33 hours CEST > < opinion > < WebLogicServer > < BEA-000365 > < Server state changed to FAILED. >

  < 16 April 2014 17:46:33 hours CEST > < error > < WebLogicServer > < BEA-000383 > < is not an essential service. The server shuts itself down. >

  < 16 April 2014 17:46:33 hours CEST > < opinion > < WebLogicServer > < BEA-000365 > < Server state has changed to FORCE_SHUTTING_DOWN. >

  Stopping Server Derby...

  Derby server stopped.

  Process is complete.

  [End of IntegratedWebLogicServer.]

  SQL authentication is configured using a data source. If I change the name of blind in weblogic in the config.xml file data source, he throws exception but able to start the server. can any body help to what he's trying to find the data source before inilizing it. Here is my file config.xml

  <? XML version = "1.0" encoding = "UTF - 8"? >

  " < domain xmlns =" http://xmlns. Oracle.com/WebLogic/Domain "xmlns:sec =" http://xmlns. " Oracle.com/WebLogic/Security "xmlns:wls =" http://xmlns. " Oracle.com/WebLogic/Security/WLS "" xmlns: xsi = " http://www.w3.org/2001/XMLSchema-instance " xsi: schemaLocation = " http://xmlns." Oracle.com/WebLogic/Security/XACML http://xmlns.oracle.com/weblogic/security/xacml/1.0/xacml.xsd http://xmlns.oracle.com/weblogic/security/providers/passwordvalidator http://xmlns.oracle.com/weblogic/security/providers/passwordvalidator/1.0/passwordvalidator.xsd http://xmlns.oracle.com/oracleas/schema/11/jps/weblogic/providers http://xmlns.oracle.com/weblogic/1.0/security.xsd http://xmlns.oracle.com/weblogic/domain http://xmlns.oracle.com/weblogic/1.0/domain.xsd http://xmlns.oracle.com/weblogic/security http://xmlns.oracle.com/weblogic/1.0/security.xsd http://xmlns.oracle.com/weblogic / security/wls http://xmlns.oracle.com/weblogic/security/wls/1.0/wls.xsd' > .

  < name > DefaultDomain < / name >

  field < version > 12.1.2.0.0 < / domain-version >

  > security configuration <

  < name > DefaultDomain < / name >

  < domain >

  < sec: authentication - provider xsi: type = "wls:sql - authenticatorType" >

  db_user < sec: name > < / sec: name >

  < sec: control - flag > SUFFICIENT < / sec: control - flag >

  < wls: data-source-name >workdayDS< / wls: data-source-name >

  < wls:plaintext - passwords-activated > true < / wls:plaintext - passwords-enabled >

  < wls:sql - get-users-Word of past > SELECT PASSWORD FROM WORKDAY_USERS WHERE username =? < / wls:sql - get-users-Word of past >

  < wls:sql - user - exists > SELECT name from USER OF WORKDAY_USERS WHERE username =? < / wls:sql - user - exists >

  < wls:sql - list-members-groups > short_name SELECT OF WORKDAY_user_role_grants g, workday_roles r, workday_users u WHERE g.usr_id = AND g.rle_id = r.id AND u.username u.id =? < / wls:sql - list-members-groups >

  < wls:sql - list-users > SELECT USER FROM WORKDAY_USERS WHERE name LIKE USER name? < / wls:sql - list-users >

  < wls:sql - get-user-description > SELECT DISPLAY_NAME FROM WORKDAY_USERS WHERE username =? < / wls:sql - get-user-description >

  < wls:sql - list-groups > SELECT SHORT_NAME FROM WORKDAY_ROLES WHERE SHORT_NAME AS? < / wls:sql - list-groups >

  < wls:sql - group - exists > SELECT SHORT_NAME WORKDAY_ROLES WHERE SHORT_NAME =? < / wls:sql - group - exists >

  < wls:sql - East-members > SELECT u.username OF WORKDAY_user_role_grants g, WORKDAY_users u WHERE u.id = g.usr_id AND rle_id = (SELECT id FROM WORKDAY_roles WHERE short_name =?) AND usr_id = (SELECT id FROM WORKDAY_users WHERE username =?) < / wls:sql - is-member >

  < wls:sql - get-group-description > SELECT name FROM workday_roles WHERE the short_name =? < / wls:sql - get-group-description >

  < wls:password - algorithm > < / wls:password - algorithm >

  < wls:password - style > PLAINTEXT < / wls:password - style >

  < wls:sql - create-user > INSERT INTO WORKDAY_USERS (USERNAME, PASSWORD, DISPLAY_NAME) VALUES (?,?,?) < / wls:sql - create-user >

  < wls:sql - user-delete > DELETE FROM WORKDAY_USERS WHERE username =? < / wls:sql - remove-user >

  < wls:sql - remove group memberships > DELETE FROM WORKDAY_user_role_grants WHERE rle_id = (SELECT id FROM workday_roles WHERE short_name =?) OR usr_id = (SELECT id FROM workday_users WHERE username =?) < / wls:sql - remove group memberships >

  < wls:sql - set-user-description > UPDATE WORKDAY_USERS SET DISPLAY_NAME =? WHERE USERNAME =? < / wls:sql - set-user-description >

  < wls:sql - set-user-word of past > UPDATE WORKDAY_USERS SET PASSWORD =? WHERE USERNAME =? < / wls:sql - set-user-word of past >

  < wls:sql - create group > VALUES INSERT INTO WORKDAY_ROLES (id, short_name, name) (ROLES_SEQ. NEXTVAL,?,?) < / wls:sql - create group >

  < wls:sql - set-group-description > UPDATE workday_roles SET name =? WHERE short_name =? < / wls:sql - set-group-description >

  < wls:sql - Add-Member-to-group > INSERT INTO workday_user_role_grants (id, rle_id, usr_id) VALUES (workday_user_role_grants_seq. NEXTVAL, (SELECT id FROM workday_roles WHERE short_name =?), (SELECT id FROM workday_users WHERE username =?)) < / wls:sql - Add-Member-to-group >

  < wls:sql - remove-member-of-group > DELETE FROM workday_user_role_grants WHERE rle_id = (SELECT id FROM workday_roles WHERE short_name =?) AND usr_id = (SELECT id FROM workday_users WHERE username =?) < / wls:sql - remove-member-of-group >

  < wls:sql - group-delete > DELETE FROM WORKDAY_ROLES WHERE short_name =? < / wls:sql - remove group >

  < wls:sql - delete-Group-members > DELETE FROM workday_user_role_grants WHERE rle_id = (SELECT id FROM workday_roles WHERE short_name =?) < / wls:sql - remove group member >

  < wls:sql - list-group-members > SELECT username FROM workday_user_role_grants g, workday_roles r, u workday_users WHERE g.usr_id = AND g.rle_id = r.id AND r.short_name u.id =? AND u.username AS? < / wls:sql - list-group-members >

  < / sec: authentication - provider >

  < sec: authentication - provider xsi: type = "wls:default - authenticatorType" >

  < sec: name > DefaultAuthenticator < / sec: name >

  < / sec: authentication - provider >

  " < sec: authentication - provider xmlns:prov = ' http://xmlns.Oracle.com/OracleAS/schema/11/JPs/WebLogic/providers "xsi: type ="prov:trust - service-identity-asserterType"> ".

  Trust Service identity Asserter < sec: name > < / sec: name >

  < / sec: authentication - provider >

  < sec: authentication - provider xsi: type = "wls:default - identity-asserterType" >

  < sec: name > DefaultIdentityAsserter < / sec: name >

  < dry: active-type > AuthenticatedUser < / dry: active-type >

  < / sec: authentication - provider >

  " < sec: role - Mapper = xmlns:xac ' http://xmlns.Oracle.com/WebLogic/security/XACML "xsi: type =" xac:xacml - role-mapperType "> ".

  < sec: name > XACMLRoleMapper < / sec: name >

  < / sec: role - Mapper >

  " < sec: authorizer = xmlns:xac ' http://xmlns.Oracle.com/WebLogic/security/XACML "xsi: type =" xac:xacml - authorizerType "> ".

  < sec: name > XACMLAuthorizer < / sec: name >

  < / sec: authorizer >

  < sec: adjudicator xsi: type = "wls:default - adjudicatorType" >

  < sec: name > DefaultAdjudicator < / sec: name >

  < / sec: adjudicator >

  < sec: credential - Mapper xsi: type = "wls:default - credential-mapperType" >

  < sec: name > DefaultCredentialMapper < / sec: name >

  < / sec: credential - Mapper >

  < sec: cert - path-provider xsi: type = "wls:web - logic-cert-path-providerType" >

  < sec: name > WebLogicCertPathProvider < / sec: name >

  < / sec: cert - path-supplier >

  < sec: cert - road-builder > WebLogicCertPathProvider < / sec: cert - road-builder >

  < sec: name > myrealm < / sec: name >

  " < sec: password - validator = xmlns:pas ' http://xmlns.Oracle.com/WebLogic/security/providers/passwordValidator "xsi: type =" not: System-Password - validatorType "> ".

  < sec: name > SystemPasswordValidator < / sec: name >

  < not: min - password - > 8 length < / not: min - password - length >

  < not: min-digital - or - special-characters > 1 < / not: min-digital - or - special characters >

  < / sec: password - validator >

  < / domain >

  < domain >

  < sec: authentication - provider xsi: type = "wls:sql - authenticatorType" >

  db_user < sec: name > < / sec: name >

  < sec: control - flag > OPTIONAL < / sec: control - flag >

  < / sec: authentication - provider >

  < s: deploy-credential-mapping-ignored > true < / sec: deploy-credential-mapping-ignored >

  RDBMS < sec: name > < / sec: name >

  < / domain >

  field < default > myrealm < / default domain >

  < credentials encrypted > {ESA} oiXGiKafJRTHRLy3teTxciHGGJde23frXWjmnQAK2qQIuRYhySgd6oh/ZsnHQK1u99KboPN4Tjo5uS6tg37hufUPCJIdgDAhAOjBEZHVTXFc4YwQmZ6jdCpqlqEjUOkK < / encrypted credential >

  WebLogic < node-Manager-user name > < / node-Manager-user name >

  {ESA} < node-Manager-password - encrypted > dPzCkXm4Z8SaMVCroCwFXEIvbz/FTMroi8W/aDM7blA = < / node-Manager-password encrypted >

  < use-kss-for-demo > true < / use-kss-for-demo >

  < / security configuration >

  < Server >

  < name > DefaultServer < / name >

  < ssl >

  < name > DefaultServer < / name >

  < enabled > true < / enabled >

  < Listening port >

  8102

  < / Listen-port >

  < two - way ssl compatible > true < / two - way compatible ssl >

  < / ssl >

  < Listening port >

  8101

  < / Listen-port >

  > web server <

  < name > DefaultServer < / name >

  < log-server-web >

  < name > DefaultServer < / name >

  < elf fields > date time cs-method ctx-ctx - sc-status cs - uri DIN ecid < / elf fields >

  <-log file format > extended < / format of log file-->

  < / Web-server log >

  < / web server >

  BRP1LAP16 < listen-address > < / listen-address >

  < tunneling-enabled > true < / tunnel-enabled >

  <-diagnosis-server configuration >

  < name > DefaultServer < / name >

  < diagnosis-context-activated > true < / diagnosis-context-enabled >

  < / config-diagnosis-server >

  defaultCoherenceCluster < consistency cluster-system-resource > < / coherence-cluster-system-resources >

  < / Server >

  < incorporated-ldap >

  < name > DefaultDomain < / name >

  < credentials encrypted > {ESA} WRTXOv5WcAtcIZFA7g9azU4v/ogflkbFEN1TAdhhGbU6R7RiiSfLaouE6fgnkjRg < / encrypted credential >

  < / embedded-ldap >

  configuration < version > 12.1.2.0.0 < / configuration-version >

  < app deployment >

  State-management-provider-memory-rar < name > < / name >

  DefaultServer < target > < / target >

  RAR < module-type > < / module-type >

  C:/Oracle12c/middleware/Oracle_Home/oracle_common/modules/com.Oracle.State-management.State-management-provider-memory-RAR-impl_12.1.2.rar < source path > < / source-path >

  DDOnly <-security model dd > < / security-dd-model >

  > mode staged < nostage < / scene-mode implementation >

  < / app-deployment >

  < app deployment >

  DMS Application #11.1.1.1.0 < name > < / name >

  DefaultServer < target > < / target >

  war of < module-type > < / module-type >

  C:/Oracle12c/middleware/Oracle_Home/oracle_common/modules/Oracle.dms_12.1.2/DMS.war < source path > < / source-path >

  < deployment-order > 5 < / order of deployment >

  DDOnly <-security model dd > < / security-dd-model >

  > mode staged < nostage < / scene-mode implementation >

  < / app-deployment >

  < app deployment >

  < name > wsil-wls #12.1.2.0.0 < / name >

  DefaultServer < target > < / target >

  ear of < module-type > < / module-type >

  C:/Oracle12c/middleware/Oracle_Home/oracle_common/modules/com.Oracle.WebServices.FMW.WSIL-WLS-impl_12.1.2.ear < source path > < / source-path >

  < deployment-order > 5 < / order of deployment >

  DDOnly <-security model dd > < / security-dd-model >

  > mode staged < nostage < / scene-mode implementation >

  < / app-deployment >

  < app deployment >

  < name > coherence-transaction-rar < / name >

  DefaultServer < target > < / target >

  RAR < module-type > < / module-type >

  < source path - > C:/Oracle12c/Middleware/Oracle_Home/oracle_common /... /Coherence/lib/Coherence-transaction.rar < / source-path >

  DDOnly <-security model dd > < / security-dd-model >

  > mode staged < nostage < / scene-mode implementation >

  < / app-deployment >

  < app deployment >

  < name > wsm - h < / name >

  DefaultServer < target > < / target >

  ear of < module-type > < / module-type >

  C:/Oracle12c/middleware/Oracle_Home/oracle_common/modules/Oracle.WSM.pm_12.1.2/WSM-pm.ear < source path > < / source-path >

  < deployment-order > 5 < / order of deployment >

  DDOnly <-security model dd > < / security-dd-model >

  > mode staged < nostage < / scene-mode implementation >

  < / app-deployment >

  < Library >

  [email protected] oracle.sdp.client # < name > < / name >

  DefaultServer < target > < / target >

  C:/Oracle12c/middleware/Oracle_Home/oracle_common/modules/Oracle.SDP.client_12.1.2/sdpclient.jar < source path > < / source-path >

  DDOnly <-security model dd > < / security-dd-model >

  > mode staged < nostage < / scene-mode implementation >

  < / Library >

  < Library >

  [email protected] oracle.pwdgen # < name > < / name >

  DefaultServer < target > < / target >

  C:/Oracle12c/middleware/Oracle_Home/oracle_common/modules/Oracle.pwdgen_12.1.2/pwdgen.jar < source path > < / source-path >

  DDOnly <-security model dd > < / security-dd-model >

  > mode staged < nostage < / scene-mode implementation >

  < / Library >

  < Library >

  [email protected] owasp.esapi # < name > < / name >

  DefaultServer < target > < / target >

  C:/Oracle12c/middleware/Oracle_Home/oracle_common/modules/Oracle.owasp_12.1.2/OWASP-esapi.jar < source path > < / source-path >

  DDOnly <-security model dd > < / security-dd-model >

  > mode staged < nostage < / scene-mode implementation >

  < / Library >

  < Library >

  [email protected] oracle.wsm.seedpolicies # < name > < / name >

  DefaultServer < target > < / target >

  C:/Oracle12c/middleware/Oracle_Home/oracle_common/modules/Oracle.WSM.common_12.1.2/WSM-seed-policies.jar < source path > < / source-path >

  DDOnly <-security model dd > < / security-dd-model >

  > mode staged < nostage < / scene-mode implementation >

  < / Library >

  < Library >

  [email protected] odl.clickhistory # < name > < / name >

  DefaultServer < target > < / target >

  C:/Oracle12c/middleware/Oracle_Home/oracle_common/modules/Oracle.odl_12.1.2/clickhistory.jar < source path > < / source-path >

  DDOnly <-security model dd > < / security-dd-model >

  > mode staged < nostage < / scene-mode implementation >

  < / Library >

  < Library >

  [email protected] odl.clickhistory.webapp # < name > < / name >

  DefaultServer < target > < / target >

  C:/Oracle12c/middleware/Oracle_Home/oracle_common/modules/Oracle.odl_12.1.2/clickhistory.war < source path > < / source-path >

  DDOnly <-security model dd > < / security-dd-model >

  > mode staged < nostage < / scene-mode implementation >

  < / Library >

  < Library >

  < name > oracle.jrf.system.filter < / name >

  DefaultServer < target > < / target >

  C:/Oracle12c/middleware/Oracle_Home/oracle_common/modules/Oracle.jrf_12.1.2/system-filters.war < source path > < / source-path >

  DDOnly <-security model dd > < / security-dd-model >

  > mode staged < nostage < / scene-mode implementation >

  < / Library >

  < Library >

  [email protected] oracle.jsp.next # < name > < / name >

  DefaultServer < target > < / target >

  C:/Oracle12c/middleware/Oracle_Home/oracle_common/modules/Oracle.jsp_12.1.2/ojsp.jar < source path > < / source-path >

  DDOnly <-security model dd > < / security-dd-model >

  > mode staged < nostage < / scene-mode implementation >

  < / Library >

  < Library >

  < name > oracle.dconfig - infra #[email protected] < / name >

  DefaultServer < target > < / target >

  C:/Oracle12c/middleware/Oracle_Home/oracle_common/modules/Oracle.dConfig-infra_12.1.2.jar < source path > < / source-path >

  DDOnly <-security model dd > < / security-dd-model >

  > mode staged < nostage < / scene-mode implementation >

  < / Library >

  < Library >

  < name > orai18n-adf #[email protected] < / name >

  DefaultServer < target > < / target >

  C:/Oracle12c/middleware/Oracle_Home/oracle_common/modules/Oracle.nlsgdk_12.1.2/orai18n-ADF.jar < source path > < / source-path >

  DDOnly <-security model dd > < / security-dd-model >

  > mode staged < nostage < / scene-mode implementation >

  < / Library >

  < Library >

  [email protected] oracle.adf.dconfigbeans # < name > < / name >

  DefaultServer < target > < / target >

  jar of < module-type > < / module-type >

  C:/Oracle12c/middleware/Oracle_Home/oracle_common/modules/Oracle.ADF.dconfigbeans_12.1.2.jar < source path > < / source-path >

  DDOnly <-security model dd > < / security-dd-model >

  > mode staged < nostage < / scene-mode implementation >

  < / Library >

  < Library >

  [email protected] adf.oracle.domain # < name > < / name >

  DefaultServer < target > < / target >

  ear of < module-type > < / module-type >

  C:/Oracle12c/middleware/Oracle_Home/oracle_common/modules/Oracle.ADF.model_12.1.2/ADF.Oracle.domain.ear < source path > < / source-path >

  DDOnly <-security model dd > < / security-dd-model >

  > mode staged < nostage < / scene-mode implementation >

  < / Library >

  < Library >

  [email protected] adf.oracle.businesseditor # < name > < / name >

  DefaultServer < target > < / target >

  war of < module-type > < / module-type >

  C:/Oracle12c/middleware/Oracle_Home/oracle_common/modules/Oracle.ADF.businesseditor_12.1.2/ADF.businesseditor.war < source path > < / source-path >

  DDOnly <-security model dd > < / security-dd-model >

  > mode staged < nostage < / scene-mode implementation >

  < / Library >

  < Library >

  [email protected] oracle.adf.management # < name > < / name >

  DefaultServer < target > < / target >

  war of < module-type > < / module-type >

  C:/Oracle12c/middleware/Oracle_Home/oracle_common/modules/Oracle.ADF.management_12.1.2/ADF-management.war < source path > < / source-path >

  DDOnly <-security model dd > < / security-dd-model >

  > mode staged < nostage < / scene-mode implementation >

  < / Library >

  < Library >

  [email protected] adf.oracle.domain.webapp # < name > < / name >

  DefaultServer < target > < / target >

  war of < module-type > < / module-type >

  C:/Oracle12c/middleware/Oracle_Home/oracle_common/modules/Oracle.ADF.view_12.1.2/ADF.Oracle.domain.webapp.war < source path > < / source-path >

  DDOnly <-security model dd > < / security-dd-model >

  > mode staged < nostage < / scene-mode implementation >

  < / Library >

  < Library >

  < name > jsf #[email protected]< / name >

  DefaultServer < target > < / target >

  war of < module-type > < / module-type >

  C:/Oracle12c/middleware/Oracle_Home/oracle_common/modules/Oracle.jsf_2.1/JSF-RI-21.war < source path > < / source-path >

  DDOnly <-security model dd > < / security-dd-model >

  > mode staged < nostage < / scene-mode implementation >

  < / Library >

  < Library >

  < name > jstl #[email protected] < / name >

  DefaultServer < target > < / target >

  war of < module-type > < / module-type >

  C:\Oracle12c\Middleware\Oracle_Home\wlserver/common/deployable-libraries/JSTL-1.2.war < source path > < / source-path >

  DDOnly <-security model dd > < / security-dd-model >

  > mode staged < nostage < / scene-mode implementation >

  < / Library >

  < Library >

  < name > UIX #[email protected] < / name >

  DefaultServer < target > < / target >

  war of < module-type > < / module-type >

  C:/Oracle12c/middleware/Oracle_Home/oracle_common/modules/Oracle.uix_12.1.2/uix11.war < source path > < / source-path >

  DDOnly <-security model dd > < / security-dd-model >

  > mode staged < nostage < / scene-mode implementation >

  < / Library >

  < Library >

  < name > ohw - FRC #[email protected] < / name >

  DefaultServer < target > < / target >

  war of < module-type > < / module-type >

  C:/Oracle12c/middleware/Oracle_Home/oracle_common/modules/Oracle.help_5.0/OHW-RCF.war < source path > < / source-path >

  DDOnly <-security model dd > < / security-dd-model >

  > mode staged < nostage < / scene-mode implementation >

  < / Library >

  < Library >

  < name > ohw - uix #[email protected] < / name >

  DefaultServer < target > < / target >

  war of < module-type > < / module-type >

  C:/Oracle12c/middleware/Oracle_Home/oracle_common/modules/Oracle.help_5.0/OHW-UIX.war < source path > < / source-path >

  DDOnly <-security model dd > < / security-dd-model >

  > mode staged < nostage < / scene-mode implementation >

  < / Library >

  < Library >

  [email protected] oracle.adf.desktopintegration.model # < name > < / name >

  DefaultServer < target > < / target >

  ear of < module-type > < / module-type >

  C:/Oracle12c/middleware/Oracle_Home/oracle_common/modules/Oracle.ADF.desktopintegration.model_12.1.2/Oracle.ADF.desktopintegration.model.ear < source path > < / source-path >

  DDOnly <-security model dd > < / security-dd-model >

  > mode staged < nostage < / scene-mode implementation >

  < / Library >

  < Library >

  [email protected] oracle.adf.desktopintegration # < name > < / name >

  DefaultServer < target > < / target >

  war of < module-type > < / module-type >

  C:/Oracle12c/middleware/Oracle_Home/oracle_common/modules/Oracle.ADF.desktopintegration_12.1.2/Oracle.ADF.desktopintegration.war < source path > < / source-path >

  DDOnly <-security model dd > < / security-dd-model >

  > mode staged < nostage < / scene-mode implementation >

  < / Library >

  < Library >

  [email protected] oracle.bi.jbips # < name > < / name >

  DefaultServer < target > < / target >

  ear of < module-type > < / module-type >

  C:/Oracle12c/middleware/Oracle_Home/oracle_common/modules/Oracle.bi.presentation_12.1.2/bi-jbips-SLIB-stub.ear < source path > < / source-path >

  DDOnly <-security model dd > < / security-dd-model >

  > mode staged < nostage < / scene-mode implementation >

  < / Library >

  < Library >

  [email protected] oracle.bi.composer # < name > < / name >

  DefaultServer < target > < / target >

  war of < module-type > < / module-type >

  C:/Oracle12c/middleware/Oracle_Home/oracle_common/modules/Oracle.bi.presentation_12.1.2/bi-composer-SLIB-stub.war < source path > < / source-path >

  DDOnly <-security model dd > < / security-dd-model >

  > mode staged < nostage < / scene-mode implementation >

  < / Library >

  < Library >

  [email protected] oracle.bi.adf.model.slib # < name > < / name >

  DefaultServer < target > < / target >

  ear of < module-type > < / module-type >

  C:/Oracle12c/middleware/Oracle_Home/oracle_common/modules/Oracle.bi.presentation_12.1.2/bi-ADF-Model-SLIB.ear < source path > < / source-path >

  DDOnly <-security model dd > < / security-dd-model >

  > mode staged < nostage < / scene-mode implementation >

  < / Library >

  < Library >

  [email protected] oracle.bi.adf.view.slib # < name > < / name >

  DefaultServer < target > < / target >

  war of < module-type > < / module-type >

  C:/Oracle12c/middleware/Oracle_Home/oracle_common/modules/Oracle.bi.presentation_12.1.2/bi-ADF-view-SLIB.war < source path > < / source-path >

  DDOnly <-security model dd > < / security-dd-model >

  > mode staged < nostage < / scene-mode implementation >

  < / Library >

  < Library >

  [email protected] oracle.bi.adf.webcenter.slib # < name > < / name >

  DefaultServer < target > < / target >

  war of < module-type > < / module-type >

  C:/Oracle12c/middleware/Oracle_Home/oracle_common/modules/Oracle.bi.presentation_12.1.2/bi-ADF-WebCenter-SLIB.war < source path > < / source-path >

  DDOnly <-security model dd > < / security-dd-model >

  > mode staged < nostage < / scene-mode implementation >

  < / Library >

  <>shutdown-class

  < name > DMSShutdown < / name >

  DefaultServer < target > < / target >

  < deployment-order > 150 < / order of deployment >

  > class name < oracle.dms.wls.DMSShutdown < / class name >

  < / stop-class >

  <>start-class

  < name > class start JPS < / name >

  DefaultServer < target > < / target >

  < deployment > 115 order < / order of deployment >

  > class name < oracle.security.jps.wls.JpsWlsStartupClass < / class name >

  < failure-is-fatal > false < / failure-is-fatal >

  < charge-before-app-deployments > true < / load-front-app-deployments >

  < charge-before-app-activation > true < / load-front-app-activation >

  < / start class >

  <>start-class

  < name > JPS start after Activation class < / name >

  DefaultServer < target > < / target >

  < deployment-order > 160 < / order of deployment >

  > class name < oracle.security.jps.wls.JpsWlsPostServiceActivationStartup < / class name >

  < failure-is-fatal > false < / failure-is-fatal >

  < charge-before-app-deployments > false < / load-front-app-deployments >

  < charge-before-app-activation > true < / load-front-app-activation >

  < / start class >

  <>start-class

  < name > class start WSM < / name >

  DefaultServer < target > < / target >

  > class name < oracle.wsm.config.WSMServerStartupShutdownProvider < / class name >

  < / start class >

  <>start-class

  < name > class start JRF < / name >

  DefaultServer < target > < / target >

  < deployment > 110 order < / order of deployment >

  > class name < oracle.jrf.wls.JRFStartup < / class name >

  < failure-is-fatal > false < / failure-is-fatal >

  < charge-before-app-deployments > true < / load-front-app-deployments >

  < charge-before-app-activation > true < / load-front-app-activation >

  < / start class >

  <>start-class

  < name > ODL-start < / name >

  DefaultServer < target > < / target >

  < deployment > 145 order < / order of deployment >

  > class name < oracle.core.ojdl.weblogic.ODLConfiguration < / class name >

  < failure-is-fatal > false < / failure-is-fatal >

  < charge-before-app-deployments > true < / load-front-app-deployments >

  < charge-before-app-activation > true < / load-front-app-activation >

  < / start class >

  <>start-class

  < name > DMS-start < / name >

  DefaultServer < target > < / target >

  < deployment-order > 150 < / order of deployment >

  > class name < oracle.dms.wls.DMSStartup < / class name >

  < failure-is-fatal > false < / failure-is-fatal >

  < charge-before-app-deployments > true < / load-front-app-deployments >

  < charge-before-app-activation > true < / load-front-app-activation >

  < / start class >

  <>start-class

  < name > class start context AWT Application < / name >

  DefaultServer < target > < / target >

  < deployment-order > 150 < / order of deployment >

  > class name < oracle.jrf.AppContextStartup < / class name >

  < failure-is-fatal > false < / failure-is-fatal >

  < charge-before-app-deployments > true < / load-front-app-deployments >

  < charge-before-app-activation > true < / load-front-app-activation >

  < / start class >

  <>start-class

  < name > class start of Web Services < / name >

  DefaultServer < target > < / target >

  < deployment-order > 150 < / order of deployment >

  > class name < oracle.j2ee.ws.server.WebServiceServerStartup < / class name >

  < failure-is-fatal > false < / failure-is-fatal >

  < charge-before-app-deployments > true < / load-front-app-deployments >

  < charge-before-app-activation > true < / load-front-app-activation >

  < / start class >

  store < file >

  < name > mds-GOSA < / name >

  < Directory > store/gmds < / book >

  DefaultServer < target > < / target >

  < / file-store >

  < name-server-admin > DefaultServer < / name of the server-admin->

  < wldf-system-resources >

  Module FMWDFW < name > < / name >

  DefaultServer < target > < / target >

  < name-file-descriptor > diagnostics/Module-FMWDFW - 2818.xml < / file-descriptor-name >

  incident creates FMWDFW < description > from non-controlled Exceptions and critical errors < / description >

  < / wldf-system-resources >

  < jdbc-system-resources >

  < name > LocalSvcTblDataSource < / name >

  DefaultServer < target > < / target >

  < name-file-descriptor > jdbc/LocalSvcTblDataSource - jdbc.xml < / file-descriptor-name >

  < / jdbc-system-resources >

  < jdbc-system-resources >

  < name > opss-data-source < / name >

  DefaultServer < target > < / target >

  < name-file-descriptor > jdbc/opss-datasource - jdbc.xml < / file-descriptor-name >

  < / jdbc-system-resources >

  < jdbc-system-resources >

  < name > opss-audit-viewDS < / name >

  DefaultServer < target > < / target >

  < name-file-descriptor > jdbc/opss-auditview - jdbc.xml < / file-descriptor-name >

  < / jdbc-system-resources >

  < jdbc-system-resources >

  < name > opss-audit-DBDS < / name >

  DefaultServer < target > < / target >

  < name-file-descriptor > jdbc/opss-audit - jdbc.xml < / file-descriptor-name >

  < / jdbc-system-resources >

  < jdbc-system-resources >

  < name > mds-GOSA < / name >

  DefaultServer < target > < / target >

  < name-file-descriptor > jdbc/mds-GOSA - jdbc.xml < / file-descriptor-name >

  < / jdbc-system-resources >

  < jdbc-system-resources >

  < name > workdayDS < / name >

  DefaultServer < target > < / target >

  < name-file-descriptor > jdbc/workdayDS-6554 - jdbc.xml < / file-descriptor-name >

  < / jdbc-system-resources >

  < consistency cluster-system-resource >

  < name > defaultCoherenceCluster < / name >

  < name-file-descriptor > coherence/defaultCoherenceCluster - coherence.xml < / file-descriptor-name >

  < / coherence-cluster-system-resources >

  < / domain >

  Data source that I use it is wordayDS.

  I have deleted my domain name and create new ones yet to configure SQL authentication, and it works fine.

• How to force the Photos up-to-date original jpeg file after you have added the GPS data and rotation

  Hello

  Pictures has the ability to add GPS data to an image file, but stores the GPS data in a catalog instead of the actual image file.  The same seems to apply to the rotation of the image.  Is there a way to force the Photos up-to-date the actual image file?

  The only solution I have found so far is to export images updated, remove them from the library of Photos and re - import.  This process, however, replaces the original creation date with the date of the export in the file.  (i.e. a photo taken in 2007 with a creation date of 2007 will now have the date it has been exported photos as a creation date.)

  The reason why I want to update the original file, it is that I use Google Photos automatically create albums using the content of the image, the GPS data and dates.  The backup utility Google downloads the file Master Original therefore excludes files and changes to images in the photos.

  I use the photo Version 1.5 (370.42.0)

  Thank you.

  The same seems to apply to the rotation of the image.  Is there a way to force the Photos up-to-date the actual image file?

  No, Photos will never alter the original image file.

  You can export the photo with the GPS and reimport with file > export and activate "include location information:

  

  Or use a tool to add location data before importing photos to Photos. I use Jetphoto Studio.

• HP deskjet 6840 undetected on the wireless network after you have added the new wireless router.

  Belkin Wireless Router unfounded, implemented with WEP security, is dead. Replaced by Belkin new value WPA/WPA2 security is enabled.

  I can connect ok with USB, but I don't know how to re - enable wireless printing.

  Can anyone help?

  Hello

  To connect the printer to the network, you will need to use the PC. tehrefore knowing what OS you use will allow you to direct you better.

  If you are using Windows 7, you need to connect the printer with an Ethernet connection first, then enter the pritner EWS page to configure the wireless connection.

  You can find the exact measurements below:

  http://support.HP.com/us-en/document/c01943577

  For Windows XP or Vista, please follow the steps below to connect the pritner to your wireless network:

  http://support.HP.com/us-en/document/c01835115

  Kind regards

  Shlomi

• After you have installed the Realtek drivers, I get code 10 error and cannot start sound.

  original title: help with my sound please

  After you have installed the realtek driver it says code error 10 can't start sound...

  also I can't find the button sound.video and games on the Device Manager heres the message in Event Viewer:

  Log name: System

  Source: PlugPlayManager

  Date: 17/05/2012-18:50:27

  Event ID: 12

  Task category: no

  Level: error

  Keywords: Classic

  User: n/a

  : My computer

  Description:

  The device ' in Build Conexant Type 2 modem "(HDAUDIO\FUNC_02 & VEN_14F1 & DEV_2C06 & SUBSYS_10250126 & REV_1000\4 & 37d33e44 & 0 & 0102) disappeared from the system without first be prepared for removal.

  The event XML:

   

     

      12

      2

      0

      0 x 80000000000000

     

      435

      System

      badimo-PC

     

   

   

      Modem Conexant - in the generation Type 2

      HDAUDIO\FUNC_02 & VEN_14F1 & DEV_2C06 & SUBSYS_10250126 & REV_1000\4 & 37d33e44 & 0 & 0102

      00000000

   

  Hello I want to,

  The problem you describe looks like you are maybe install the wrong driver for your sound card.
  Have you checked that the driver is for your specific device?
  If you look in your system's Device Manager, is there a yellow exclamation next to the audio controller?
  http://Windows.Microsoft.com/en-us/Windows-Vista/open-Device-Manager
  If so, this seems to indicate that the drivers installed are not good for your sound card. Usually if you double-click the device in Device Manager, it will say something in the sense of "Device cannot start".
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

• Why is downloading an application after you have paid for the whole if difficult CC...?

  I paid for CC student for the year.  CC downloaded on my Mac, click on install for Photoshop and 30 odd hours later, several attempts, NOTHING.  So frustrating.  I get as much as 11 percent, then it breaks down, says it's the internet connection has been lost and the opportunity to try again.  I have now connected directly to my modem ethernet connection.  Half an hour later, it's 0 percent installed...  What the hell?  It shouldn't be complicated.  I paid for it and need it installed as soon as possible for assignments...  Help for someone who does not speak computer language would be great.  See you soon

  Please follow: why download an application after you have paid for the whole if difficult CC...?

  (Double Post)

• Forums CWMS drop after you have entered the code meeting

  Hi all

  We have webex 2.6.1.45.B - AE, call out of work, but a drop after you have entered the code-meeting... Work of DTMF.

  may be, because: you are using a trial version of the Cisco WebEx meeting server which expires in 32 days. Buy licenses to host for your system to avoid the limitation of access host?

  or someone has an idea?

  Thank you very much!

  Hello

  This problem is caused by a bad configuration of the integration of CUCM with CWMS.

  Make sure you check you SIP Trunks and SIP configuration on CUCM routing model.

  Make sure that your points in routing SIP Trunk SIP of Point Application model.

  Make sure that the Partition configured in routing SIP model belongs to a CSS that is configured in the LoadBalancing SIP trunk under:

  1. change of itinerary calling search space

  2 outside dialogue see calling search space

  Also, refer to this post to understand why the model of routing SIP and Application Point SIP trunks are used: https://supportforums.cisco.com/discussion/12879351/cucm-and-cwms-call-routing

  In addition, this guide to the official reference documentation: http://www.cisco.com/c/en/us/td/docs/collaboration/CWMS/2_6/Planning_Guide/Planning_Guide/Planning_Guide_chapter_0101.html

  I hope this will help.

  -Dejan

• KB955759 does not appear when I check the updates manually, but it appears with the yellow shield after you have enabled the automatic updates.

  original title: Windows Update acts confused - kb955759 does not appear when I check the updates manually, but it appears with the yellow shield after you have enabled the automatic updates.

  I just reset my CMOS settings, writing zeros for my hard drive, repartitioned, reformatted and used the recovery cd Gateway system to get my computer to Windows 98se - factory settings, except at the beginning of the recovery of the system, when it says "press any key for advanced options," I pressed a key and then I unchecked all the default (3rd party) applications including Norton and left only 2 checked: "Updated USB Hub" and "Windows Shutdown Supplement," while nothing has been installed, leaving only win98.
   
  Then I used my disc XP Home (SP2) update.  I, immediately after the upgrade to Windows XP, installed "Office XP with Frontpage, Developer Edition", then Norton 2012 before never connect to the internet.
  Then, I connected to the internet and continuously update of Norton, before ever hitting the Windows Update page. The first thing I did then was to activate Windows, and then activate the office.
  Then I hit the update of Windows "button" that says "get all your updates in one place... upgraded"Microsoft Update".  I, then, just kept hitting the page update and restart, until I find the SP3.  Then, I took a break, until the next day.
   
  I have an ADSL broadband, with a Linksys EtherFast PCI card.
   
  Then I got SP3, which installed without any problems.
  So I just kept "microsoft continuous update" manually (and reboot), until there is no more updates - EXCEPT, I always uncheck Windows Malicious Software Removal Tool - which was the only screening at the final stop for the night.  I think that I ticked the box "don't ask me about this update".
   
  Then, in the morning, after you have enabled automatic updates, I noticed the yellow shield - Windows security icon (or whatever it's called), so I clicked on it and checked it was tellimg me was available [when I checked "Custom Install (advanced users)"].  What showed was 1 update - 955759 KB.
   
  After the problem, already at the reformat (months and months), see the yellow shield telling me there are updates available, which were already installed (before rebooting), I checked manually on the internet with IE 8, pressing alt, "T", "U".  There is no updated list.  Then I checked through my history of update (twice), and KB955759 had not been installed.
   
  My update setting is to let windows download ('important') updates, but let me choose when to install them.
   
   
   
  What is the right - Windows Update (NO update important reporting) Site, or the yellow shield (reports [a] kb955759 [update])?
   
  I can not yet confirm he is supposed to be an update for XP home kb955759, because I was unable to locate any detailed documentation on this 'thing' that protect the yellow safety seems to think is a significant update.

  Comment 1: To my rquest, a moderator merged your thread in the Sub-forum Win7 updates with your wire in the Sub-forum of updates of Windows XP 20 Feb-12, c. 07:50 UTC.

  Comment 2: If you will not contact the MS Support on this issue?

  ~~~~~~~~~~~~~~~~~~~~~~~~~~

  Just for the heck of it, I have disabled the automatic updates, cleared my browser cache, checked manually, updates from microsoft (windows) and found none (with the exception of software malware removal tool windows [which I have not installed]).  Then, I turned the automatic updates on, and without even being connected to the internet, the yellow shield popped up with the kb955759 "update"...

  Repost...

  1. If you open Internet Explore (only!) to http://windowsupdate.microsoft.com and run a CUSTOM scan, KB955759 appears in results?... If so, you manage to install it and/or security updates available?

  2 after no. 1 above [<>], is the 'yellow shield' icon appears in the Notification area (on the left of your clock)?  .. and if yes, by clicking on the 'yellow shield' icon tells you that KB955759 or any other updates is ready-to-be-installed?  .. .and if so, you manage to install it?

  3 after doing 1 # & #2 above [<>], is KB955759 or any other updates offered as a ready-to-install update when you go off your computer?  .. .and if so, you manage to install it?

  ... I guess that clearing the browser cache does not erase 'downloaded' updates.

  Nope. If you want to clear the queue of the update...

  OPTION A:

  1. stop the automatic updates service:

  Start > run > (type or copy/paste) services.msc > click OK
  Double-click automatic updates > click stop
  (Stopping the service will take a moment)

  2 remove the contents of the download folder:

  Start > run > (type or copy/paste) %windir%\SoftwareDistribution > click OK
  
  Open the download folder and delete its content
  Close the window.

  3. start the automatic updates service:

  Start > run > (type or copy/paste) services.msc > click OK
  Double-click automatic updates > click Start
  (Starting the service will take a moment)

  OPTION B:

  1. open Internet Explorer (only!) to http://support.microsoft.com/kb/910336 [don't know the titles, etc..]

  2. make disappear/close the Troubleshooter automatically pop up.

  3 repaired 50202 in DEFAULT modes and AGGRESSIVE. [1]

  4 reboot.

  Does anyone know how to determine if software mailicious removal tool is installed on XP? [source ]

  Check the located log file...

  C:\Windows\Debug\ MRT. NEWSPAPER <>

  Related...

  ... This leaves us with the malicious software removal tool don't appear not.

  I guess I'll have to leave "auto-update" (I often have less than 65 M of free memory left and do not have enough memory to msrt) and don't assume no other current error. [source; 17 Aug-11]

  It's no wonder that you ended up having to do a clean install of Win98SE & then upgrade to Windows XP again!

  ================================================================
  [1] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not updates installed in Add/Remove Programs list.

• I installed the download tool usb/dvd windows 7, but after you have selected the iso file when I insert the USB stick and refrecing, it does show that "no usb drive compatible' what is the problem with my USB

  I installed the download tool usb/dvd windows 7, but after you have selected the iso file when I insert the USB stick and refrecing, it does show that "no usb drive compatible' what is the problem with my USB

  I have sandisk cruzer blade USB key

  Hi Rohit,

  Thanks for posting your query in Microsoft Community Forum. I understand that your USB drive is having problems of compatibility with your computer, but I would like to learn more about the issue in order to provide you with better assistance.

  1. You did it any significant hardware or change software on the computer before this problem?
  2. When do you get exactly the error message?
  3. Have you tried to connect to any other computer on this flash drives?
  4. Your USB key works on other computers or have you tried to connect to different USB ports on this computer?
  5. Is the pen drive getting detected in the case or you are able to access the drive folder in the window of the computer ?

  The question may arise if the currently loaded USB driver has become unstable or damaged, or if your PC requires an update for problems that could conflict with a device USB and Windows. This can also occur if your USB controllers may have become unstable or corrupt. So, I would suggest trying the following steps and check if the problem persists.

  Method 1:

  Please try the fixit (s) provided below which will help you solve common problems associated with devices and USB ports.

  • Hardware devices do not work or are not detected in Windows
  • Diagnose and automatically fix the Windows USB problems

  If method 1 does not work, try Method 2.

  Method 2:

  Remove and reinstall all USB controllers.

  1. Open Manager devices by clicking the Start button, click Control Panel, click system and security, and then, under System, clicking Device Manager. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  2. In the list of the categories of equipment, locate and expand Bus USB controllers.
  3. Right-click every device under the Bus USB controllers node and then click Uninstall to remove them one at a time.
  4. Restart the computer and let the USB controllers get reinstalled.

  Plug in the removable USB device and test to make sure that the problem is solved.

  If the problem persists, go to method 3.

  Method 3:

  This method will install the latest drivers from device to your USB device.

  1. Click the Start button, type Windows Update in the search box, and then click Windows Update in the results pane.
  2. Click find updates. When the scan finished, click optional review updates.
  3. Click the check box next to the update, and then click install updates.
  4. If you are prompted, read the license agreement, then click I agree.
  5. Follow the instructions on the screen to download and install updates.
  6. If you are prompted, restart your computer.

  More information: Update a hardware driver that is not working properly

  Hope this information is useful. If the problem still persists, please post back for further assistance, we will be happy to help you.

• I bought Photoshop CC 2015 creative thinking Cloud before running the trial version of my computer. After you have installed the creative cloud, the box with the number of days remaining still apears. How can I proceed?

  I bought Photoshop CC 2015 creative thinking Cloud before running the trial version of my computer. After you have installed the creative cloud, the box with the number of days remaining still apears. How can I proceed?

  Check your account indicates the subscriptions that you expect (and that the adobe, used in the next step id is correct) by logging in here and checking the status of your subscription, https://www.adobe.com/account.html

  then, if it's current, disconnect and then back to your client application using the adobe with the link above in cc id: http://helpx.adobe.com/creative-cloud/kb/sign-in-out-creative-cloud-desktop-app.html

  If this fails, CC help | Applications creative Cloud back to update evaluation Mode to 2015 CC

• APEX does not open after you have created the new Oracle listening port

  Hi guys,.
  
  I had to re register Oracle listener using "lsnrctl start". A new listening port has been created and I am able to connect user Apex by PL/SQL Developer. Port 8080 is open.
  But if I try to open the application APEX of URL (http://localhost: 8080/apex/f? p = :::) 4550:1:0 its not opening not.) It was working fine until yesterday.
  I use Oracle XE 11 g and APEX 4.2
  
  C:\Windows\System32 > sqlplus sys as sysdba
  
  SQL * more: Production of liberation 11.2.0.2.0 kills may 7 22:21:18-2013
  
  Copyright (c) 1982, 2010, Oracle. All rights reserved.
  
  Enter the password:
  
  Connected to:
  Oracle Database 11g Express Edition Release 11.2.0.2.0 - Production
  
  SQL > SELECT DBMS_XDB. GETHTTPPORT FROM DUAL;
  
  GETHTTPPORT
  -----------
  8080
  
  SQL >
  
  so I do not know why APEX does not URL. What I have to put something at the TOP after you have created the new listening port. Can you please help?
  
  Kind regards
  Marie Claire
  
  Published by: 1004608 on May 7, 2013 14:40

  Link to your thread to listen would have helped: Oracle XE 11g with Apex No problem of Listener (ORA-12541: listener TNS:no)

  It seems that your listener uses the static instance via the listener.ora file registration and missing entries for the http service. Edit your listener.ora (F:\Apex_Installed\app\oracle\product\11.2.0\server\network\ADMIN\listener.ora) file and add the following entries in the listener.ora file DESCRIPTION_LIST. Then, restart the listenerer.

  (DESCRIPTION=
    (ADDRESS=(PROTOCOL=tcp)(HOST=localhost)(PORT=8080))(Presentation=HTTP)(Session=RAW)
  )