Cannot access router after support call

Support has changed the password of my router. I can see is more settings. What I have to do a complete reset to get it back?

Disconnect the modem entirely.  Connect through the wire of your computer to a LAN port.  Press and hold the button of reset for 30 seconds and then release.  Wait 10 seconds and cycle power to the router.  Go to 192.168.1.1 with your browser, the connection empty user name, the password "admin".  Try now.

Tags: Linksys Routers

Similar Questions

  • HP 190 t and cannot access network after upgrade to win 8

    Upgrade to Windows 8 and cannot access the internet on my desktop HP 190 t.  No driver available on the HP support site.  I can see received/transmitted data between router but that is as far as it goes.   Have ideas or how to get the chipset drivers or should I get another network card?  Everything else seems to work very well.

    I found the problem.  Norton Security Suite does not work with Win 8, causing conflicts.   I have remove the application configured defender and firewall Windows to maintain security until Norton product can support 8 Win.

  • Cannot access bios after installing the video card

    I have a PC HP 800 G1 tour.  When I install an EVA GT 520 external video card I can access is no longer the first screen to get the bios unless I get out the video card.  I want to change the bios to use only the external card, or at least to see the initial splash screen, but cannot access it.  It is running windows 8.1.  I updated the bios to the lasest version and still the same.

    Hello:

    You may need to change some BIOS settings - even if you add an external video card...

    http://support.HP.com/us-en/document/c03653200

  • Cannot access router wi - fi remote intelligent service said router offline.

    I can't access router remotely by using smart WiFi. When I connect it says router is in offline mode. Wrt1200AC. Used to work and now it doesn't. I have an account setup smart wi - fi. I can connect locally on my network. I went to troubleshooting, diagnosis, status and clicked on report. It shows that smart wi - fi service is stopped. How to start the service or connect. Everything else works fine.

    We have exhausted all possible solutions for our final step is to reflash manually its firmware. If all else fails, we will have it carefully studied by our team of level 2. Please send us an email to [email protected] with your file number, community username and link to this post for reference.

    Ann_18678
    Linksys technical support

  • Cannot access BIOS after own Win 7 installed on the new HD

    The machine is HP Elite E9240F. Here's what I did.

    1 replace the plant HD with faster player - went well

    2. clean install Win 7 on new drive - activate - went well

    3 reinstall the disc supplied with the box in the first place & format - went well.

    Now everything starts fine, and loads of Windows. NO problem BUT I cannot access the BIOS more. Not that I need at this time, but I would like to know that where I did it, I could.

    Repeated F1 or F11 at startup pressure will produce the black screen for the Windows Boot Manager.

    I removed the CMOS battery and retried - same results. I can access the blue screen when I select the boot sequence by pressing ESC but never can I go back in the system BIOS.

    Thoughts?

    All these systems are a bit different but F10 to enter the bios to me.  If it is your PC then F10 to enter the bios: http://support.hp.com/us-en/document/c01925486

  • Cannot access internet after installing the latest Windows Update

    * Original title: Question access to the internet after you have installed the latest update

    Last week, I installed the latest update of Windows 8, however once installed, I was no longer able to access the internet and became a message saying that the page cannot be displayed. Below it there is a button to click to solve the problem of connection but I did and it came back with no connection problem.

    I reset my router, but there was no question that I could access the internet on my phone and my roommates laptop. The only way that I could access the internet again was to restore my pc and remove install.

    I was then forced to install the update tonight and it's the same thing so I had to uninstall these updates again to access the internet.

    Can you please tell how can I install the update it will affect my ability to access the internet?

    Hi Victoria,.

    Please help me with the following suggestions:

    1. using modern Internet Explorer user interface or Desktop Internet Explorer?
    2. your computer is in a cable or wireless internet connection?

    3. What is the number of the kb article that is causing the problem with the internet after installing the update?

    4. are you referring to Windows Update (KB2919355) 8.1?

    Windows Update: Frequently asked Questions see (how know what are updates
    been installed?)

    http://Windows.Microsoft.com/en-us/Windows-8/Windows-Update-FAQ

    Method 1: After the update is installed, configure the computer to boot and check if you questions persists:

    How to perform a clean boot in Windows

    http://support.Microsoft.com/kb/929135/en-us

    Note: After troubleshooting, consult this section «How to reset the computer to start normally after a boot minimum troubleshooting»

    Method 2: Click on the link below to troubleshoot if the internet explore does not work:

    Why can't connect me to a network?

    http://Windows.Microsoft.com/en-us/Windows/cant-connect-to-network#1TC=Windows-8

    Warning: Reset Internet Explorer settings will not affect your browsing history, unless you check the delete personal settings during the reset. If you want only to view or delete your browsing history, you don't need to reset all the settings of Internet Explorer.

    I hope this helps. Answer please if you have any additional questions with Windows.

  • Tecra M2 - cannot access windows after restoring two days ago

    Hello
    I bought the Tecra M2V for one and a half years. Now I could not access the windowns again. I suffered such a problem for the second time, just after I have use the two days recovery disk. He came out of the blue screen. He advised me to use safe mode. But I've tried and failed several times. My other friend both also suffer these problems now. It's really annoying. Hoping some kind people to help me.

    Thank you very much.

    Hi Min

    I think that something like this is boring. Please can you give us more information about this problem? Did you change hardware configuration? Is an external device connected to the unit? Are you using the original recovery media supplied with your device?

    As far as I know that the recovery procedure cannot be responsible for something like that. BSOD can be caused by other things. Believe me I got several different units and I have never, ever seen anything like it.

    To be more specific and explain exactly what you have done.

  • External HDD PX1277E - 1 08: cannot access files after HDD felt down

    Hi all
    my beautiful felt down external HARD drive. The first part of the disk has been partitioned as free and contains the software that is used to unlock the secure parttition.
    After the success on the field, there are error messages if plugged into usb. Some dll´s are not readable etc, seems that some parts are not readable.

    How can I access the large and assured the part of my hard drive, y at - it software? I know that my pw, but the software does not point to pose for him.
    Thank you very much...
    Eric

    Very bad looks like Buddy :(
    If the HARD drive cannot be recognized then disk failure HARD and eventually, he died.

    Of course, there are a lot of special companies that could save the data of the failed HARD disk, but even I know this is not easy and costs a small fortune

  • Cannot access router EA3500 to change settings

    I would like to make a few changes to the configuration of my router, but can't access the configuration screens. I tried Smart Wifi and myrouter.local.  After entering my password, it hangs on "Waiting."... "and I never have to the configuration screens.  What I am doing wrong?

    Hi there, lindsayla18! It is possible that the IP address (192.168.1.1) of the EA3500 may have changed. You try to access the wireless user interface? It is preferable that you access with the cable from the computer to the router.

    Try to get the IP address and the default gateway ('router' for Mac) of the connected computer and use this default gateway to access the user interface.
    Last resort would be to reset and reconfigure the EA3500. You still have to, do it connected to the router.

  • Cannot access programs after message of AVG on malware

    I was watching a TV program on the net and my AVG told was detected malware (sp?) he gave me plenty of clean the file I did and then I had to restart the computer, when it restarted I found that I couldn't open all the programs and icons that normally appear in the bar on the lower right have also disappeared!  When I try to start a program, a box appears asking me to choose the program I want to use to open this program... the only thing that appears in the box is Internet explore!  We cannot open anything for example ' itunes, Word, games... nothing.  Help, please!

    Hello

    Make sure that your system is clean

    Download update and scan with the free version of malwarebytes anti-malware

    http://www.Malwarebytes.org/MBAM.php

    You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

    http://www.bleepingcomputer.com/download/anti-virus/rkill

    If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking

    Windows Vista

    Using the F8 method:

    1. Restart your computer.
    2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
    3. Select the Safe Mode with networking with the arrow keys.
    4. Then press enter on your keyboard to start mode without failure of Vista.
    5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
    6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

    __________________________________________________________________

    read this:

    Restoration. Association of exe in Windows 7/Vista after incorrectly associating it with another program

    http://www.Winhelponline.com/blog/restore-exe-file-Asso-Windows-7-Vista-incorrectly-associated/

    __________________________________________________________________

    also run the sfc/scannow command.

    http://support.Microsoft.com/kb/929833

    Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file. To do this, follow these steps:

    1. Open an elevated command prompt. To do this, click Start, click principally madeprograms,Accessories, right-clickguest, and then clickrun as administrator. If you are prompted for an administrator password or a confirmation, type the password, or clickallow.
    2. Type the following command and press ENTER:
      sfc/scannow

      The sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions

    How to analyze the entries in the log file generating the program Checker (SFC.exe) resources of Microsoft Windows in Windows Vista

    http://support.Microsoft.com/kb/928228#appliesTo

    If SFC detects the main problems it can't fix you may need to borrow a Microsoft dvd vista not an acer, HP etc. recovery disk and do a repair installation

    read the below tutorial on how to perform a repair installation

    http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  • Vista one network does. -Cannot access network after the first time it is connected

    I have a network of 4 XP machines 1 XP Pro machine 1 Vista machine at home and a home server system. Everything works fine except the machine Vista seems to be able to access the network once and after that it will be impossible to see the other system or access in any way. Anyone has any idea what exactly is happening?

    This article addresses an issue where the XP computers do not appear in the Vista network map:http://support.microsoft.com/kb/922120.  It can solve this particular problem.

    As far as the server goes, which is beyond the scope of this forum. Please repost in Windows Home Server Forum:http://social.microsoft.com/Forums/en-US/category/WindowsHomeServer/ , where experts in these servers will be happy to help you connect to it.

    I hope this helps.

    Good luck!

    Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • HP officejet pro 8600 more - cannot access internet after several hours

    HP officejet pro 8600-after that I re-boot, I can access the internet for several hours, but after awhile, I cling on websites, I try to go to. If I unplug the printer and restarting, I accecss all websites all the time. I thought iwas hooked on a scan (which was never initiated by me), but I'm not sure. Any suggestions? I'm running on a Dell XP laptop.

    Thankx

    Hello

    Please visit the link below to fix the problem.

    http://support.HP.com/us-en/document/c03149924

  • Cannot access application after renewal of the Plan

    My annual membership for renewed CC today. Now, I can't in my applications. WHEN I open applications such as PS, and MUSE it gives me the window as seen in the first post here: creative cloud sign me or asking to connect you several times

    He has my correct email in it for ID, and if I click to connect, it takes my login password, it tells me "CC will now be licensed dethrone click to continue and enjoy the software.» So I click on, then it attempts to open the app because it bounces a couple times in my dock and the low and behold! I get the same "Sign required In" original window. Again and again, this happens and none of my applications. open such as described. For some reason, I can open the bridge?

    So, I did all the suggestions listed that I could find here on the forum and on Google:

    I tried to uninstall the desktop CC app, but it would allow me to because he says that I still have applications on computer that required it. I won't uninstall 20 + apps just to try this fix.

    I used the tool for cleaning Application Adobe and applied to my CC desktop application and the Adobe application manager, several times, restarted my computer several times and it does not work.

    I reinstalled the application of CC desktop and restarted my computer several times and it does not work.

    I removed my oobe folder, as seen in this post:

    https://helpx.Adobe.com/creative-cloud/KB/signed-out-sign-in-required-error-248.html

    and that did nothing.

    I contacted Adobe about their cat and that nobody could not help and said they would have support contact me within 24 hours.

    My design time was today, not 24 hours from now.

    I use CC to desktop. 3.6.0.248 on a Mac under OS Lion 10.8.5 so I always use the apps from 2014. that absolutely worked awesomely and flawless until my renewed annual plan today! I pay a monthly automated, but my 'birthday' was today and so I got regular email "your membership is about to Expire" and then later I received an email confirmation of my payment. Even, I logged into my account to make sure that my credit card information was up to date and it is. My desktop CC reloaded app me recognized as the user too and had my correct account information and email addy in there when even I don't not re-connect in there when I recharged it. Adobe recognizes and accepts me and my account and my user.

    This isn't simply connecting my apps on my account or something like that.

    Does anyone have any other suggestions?

    THX!

    Claudia

    I called them again and this time the tech who responded to offered to help me. Less than 30 minutes on the phone with him and my problem is fixed and I can access all my apps!

    He said it was some corrupted files and he needed to access my computer, delete them, and it's all good now. Phew!

    I generally do not allow anyone access to my computer remotely, but as it was Adobe, I have confidence in them, so I let him do.

  • Cannot access portfolio after the upgrade to iOS 10

    I haven't seen this pop up on other forums yet, but my iPhone 6 Plus does not double tapping on my lock screen after that I upgraded to iOS 10.

    I went into the settings of the portfolio and Apple pay and made sure that allow access when it is locked is on.  Does anyone else know this?

    I'm having the same problem

  • Cannot access router Readyshare

    This topic was preciously posted, but I have still not found no answer. Here's my situation:

    -Netgear model router with USB inserted Readyshare C3000.

    -Windows 7 access Readyshare desktop computer

    -10 Windows laptop already accessed Readyshare. All of a sudden, I get an access denied message saying:

    "Not accessible. You may be allowed to use this network resource. Contact the administrator... A specified logon session does not exist. It may already have ended."

    No error number is attached.

    None of the network settings on the computer have been modified.

    In the file on the PC of 10 window manager I see Readyshare. When I click on it to access the content, I get the above message. He doesn't want a password. It just display the message "access denied."

    As for Googleland, I google the subject and found many discussions, but nothing of this has solved my problem. Don't know where to go next. For now, if I want to transfer files between the two systems, I resort to the old-fashioned copy to and from a flash drive way.

Maybe you are looking for

  • Satellite P100 - after reinstallation, I don't have the express media player

    I just reinstalled my laptop. Windows XP. All right. But the express Media Player software was not on the disk to repair! Do I need other software to reintall disc, or I can download somewhere? Or just the seller does not give this cd when I boght th

  • How one is resized the calendar widget?

    The owner's manual says to press the widget until vibration, and then drag the corner of the new size. Everything that happens to me is that calendar wants to move to a new position. On one attempt, the widget went in the trash. When I re-installed t

  • Consultita...

    Hola! acabo comprarme una lenovo G485 y me gustaria saber cuanto tiempo seria recommended loading the Bateria por primera vez. Gracias

  • SEARCH in a table, delete

    I have this table. I want to remove random noise. but I don't know where to start. I think I can remove row3 equal = 0. How can I do this? I want it to look like this

  • Is there anyway I can "UN-protect" a CD?

    When I put a CD on my computer, it gave me an option to 'protect' or ' not ' the contents of the disc. I didn't know what that meant so I clicked on "protect". Now I can't use the music on Windows Movie Maker or other programs. I was wondering if the