Cannot access the files from the internal hard drive that has been converted to drive external hard after the motherboard is dead

I can't access the files from an internal hard drive that has been converted to drive external hard after the motherboard is dead. I think that my files are still there, as shown in the volume of the player volume ~ 500 gb which is almost completely full. But I can't access most files, including documents and settings. When I took 'ownership' of the folder, I could open the TI but then it showed everything that was in my documents and settings on the computer file I used to open it, not the documents of the car.

I can't access the files from an internal hard drive that has been converted to drive external hard after the motherboard is dead. I think that my files are still there, as shown in the volume of the player volume ~ 500 gb which is almost completely full. But I can't access most files, including documents and settings. When I took 'ownership' of the folder, I could open the TI but then it showed everything that was in my documents and settings on the computer file I used to open it, not the documents of the car.

Uhm... I think the issue here is a misunderstanding of what you watch.

If you want to access your files from the old hard drive - you need to look in the right place.  If the old system was "Windows 7", "Documents and Settings" is the * wrong * place to look and "Users" would be the place to go.

You * will * take ownership and change permissions on ALL (you want to propagate to all subfolders/files when do - to save time) in order to get them properly.

New-->: Windows Vista/7 would have your files located in the directory 'Users' of the root of the drive - and then under your username.

  • \USERS\\Desktop\
  • \USERS\\Downloads\
  • \USERS\\Favorites\
  • \USERS\\Documents\
  • \USERS\\Music\
  • \USERS\\Pictures\
  • \USERS\\Videos\

... etc...

Documents and settings to WIndows Vista/Windows 7 is a symbolic link and would lead to what you see if you tried to use it.

Tags: Windows

Similar Questions

  • Cannot access music files from external hard drive - without permission

    original title: I can't get my computer to get permission to access my music files on an external hard drive.  I set all permissions and sharing. Can you help me???

    I HAVE READ THE ARTICLES of PERMISSIONS AND FOLLOWED all THE directions. I ALSO ' ' THE READER AND SHARED FOLDER

    Hello

    1 have had any changes made on the computer before the show?

    2. do you get an error message? If Yes, what is the full and exact error message?

    3. are you able to access other files?

    Method 1:

    Try restarting your computer in safe mode and check if the problem persists:

    http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

    Method 2:

    I suggest you for the link and check the drive for errors:

    Check a drive for errors

    http://Windows.Microsoft.com/en-us/Windows7/check-a-drive-for-errors

    Note: when running chkdsk on the drive hard if bad sectors are found, it tries to repair this sector and if all the available data may be lost.

    Let us know if it helps.

  • ProBook 450g 2: How can I recover the files from an internal hard drive, put, can they still be there?

    I have reimagee my drive when windows would'nt opens and the thought that I was using back more recent. Out of tour it was months so I lost 5 months new files, more what was there. How / if can I get back them?

    OK, that seems to be the question because I didn't get anything to try with the software. Thanks a lot guys.

  • Trying to transfer files from an internal hard drive outside under XP

    I tried to transfer files and settings from hard drive to external hard drive.  The transfer seems to take place but the hard drive is always too full.  Please notify.

    Your question is vague, as others have mentioned.

    If you try to transfer a very large file (over 4 GB) and receive a message that there are not enough space on the external hard drive even if the external hard drive seems to have a lot of room, the reason is probably that your external drive is formatted using the FAT32 file system.  If you need help with this problem, please specify your original question.  Be sure to include the exact text of any error message, without paraphrasing.

    Do NOT format your external drive if there is already data on this topic.

  • RunDLL__Error C:\windows\system32\sshnas.dll___The loading process cannot access the file because it is being used by another process.

    When I start windows Vista, I get the error message:

    RunDLL
    Error loading C:\windows\system32\sshnas.dll

    The process cannot access the file because it is being used by another process.

    How can I fix?

    Hello

    It is the result of malware, then do a very thorough check and when the system is
    clean see the following message to remove this error.

    If you need search malware here's my recommendations - they will allow you to
    scrutiny and the withdrawal without ending up with a load of spyware programs running
    resident who can cause as many questions as the malware and may be more difficult to detect as the
    cause.

    No one program cannot be used to detect and remove any malware. Added that often easy
    to detect malicious software often comes with a much harder to detect and remove the payload. Then
    its best to be thorough than paying the high price later now too. Check with them to one
    extreme overkill point and then run the cleaning only when you are sure that the system is clean.

    It can be made repeatedly in Mode safe - F8 tap that you start, however, you must also run
    the regular windows when you can.

    Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone.
    (If Rootkits run UnHackMe)

    Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

    Malwarebytes - free
    http://www.Malwarebytes.org/products/malwarebytes_free

    Run the malware removal tool from Microsoft

    Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

    You should get this tool and its updates via Windows updates - if necessary, you can
    Download it here.

    Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
    (Then run MRT as shown above.)

    Microsoft Malicious - 32-bit removal tool
    http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

    Microsoft Malicious removal tool - 64 bit
    http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

    also install Prevx to be sure that it is all gone.

    Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

    Prevx - Home - free - small, fast, exceptional CLOUD protection, working with others
    security programs. It is a single scanner, VERY EFFICIENT, if it finds something to come back
    here or use Google to see how to remove.
    http://www.prevx.com/   <-->
    http://info.prevx.com/downloadcsi.asp?prevx=Y  <-->

    Choice of PCmag editor - Prevx-
    http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

    Try the demo version of Hitman Pro:

    Hitman Pro is a second scanner reviews, designed to save your computer from malicious software
    (viruses, Trojans, rootkits, etc.). who infected your computer despite safe
    what you have done (such as antivirus, firewall, etc.).
    http://www.SurfRight.nl/en/hitmanpro

    --------------------------------------------------------

    If necessary here are some free online scanners to help the

    http://www.eset.com/onlinescan/

    -----------------------------------

    Original version is now replaced by the Microsoft Safety Scanner
    http://OneCare.live.com/site/en-us/default.htm

    Microsoft safety scanner
    http://www.Microsoft.com/security/scanner/en-us/default.aspx

    ----------------------------------

    http://www.Kaspersky.com/virusscanner

    Other tests free online
    http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

    --------------------------------------------------------

    Also follow these steps for the General corruption of cleaning and repair/replace damaged/missing
    system files.

    Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

    Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
    RUN AS ADMIN

    Enter this at the command prompt - sfc/scannow

    How to analyze the log file entries that the Microsoft Windows Resource Checker
    (SFC.exe) program generates in Windows Vista cbs.log
    http://support.Microsoft.com/kb/928228

    Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.

    How to run the check disk at startup in Vista
    http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

    -----------------------------------------------------------------------

    If we find Rootkits use this thread and other suggestions. (Run UnHackMe)

    http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/a8f665f0-C793-441A-a5b9-54b7e1e7a5a4/

    I hope this helps.

    Rob - bicycle - Mark Twain said it is good.

  • Windows cannot access the specified device, path or file. You have no permisions them appropriate to access the element.

    XP tells me high when I opened a shortcut of the exe from my office. (PC-1)
    The shortcut points to an exe file that is located on another pc xp on my peer-to-peer network. (PC-2)
    Other PCs on the same network work very well do the same thing. In my research on it, I think it has something to do with me changing the name of PC - 1, after that I created the shortcut. (the shortcut works prior name change) Recreate the shortcut is not do me everything right.
    Unfortunately I do not have restore points to return and I have no restore for this PC no more disks.

    Help! What can I do?

    Hi yellow Jeeper,

    Would you happen to use Internet Explorer 7?

    Please take a look at this article about your mistake with a possible correction, applications of network share Installation generates an error: 'Windows cannot access the specified device, file, or path'.

    I hope this helps!

  • message error "windows cannot access the specified device path or file.

    After updating all upgrades of Windows and restarting my computer, I get the error message "windows cannot access the specified device path or file" on all my programs. I tried to go to the 'system restore', but it won't let me access that is. I am running Windows XP on a Dell Vostro 400

    Tried to start the restoration of the system from the Windows Advanced Options menu and he tried to restore from the last successful boot - unfortunately the last successful upward included the problem start

    Restarted in safe mode and not run Chkdsk/r - no found error - problem persists.

    Finally found my Dell operating system disk and went into the Boot Menu at startup screen and set it to Boot from the Dell operating system CD

    After the CD started, I went to reinstall Windows, and he gave me an option for repair

    The relocation process took about 30 minutes to complete, but he reinstalled all missing or damaged files that were the cause of the problem

    Fixed a problem!

    Thanks Mike - You're on the right track!

  • Windows cannot access the specified device path or file. may not permissions to access you the item.

    Hey guys,.

    I am running Vista on my laptop Toshiba P200D. Recently I was making an error whenever I try to open the files that I downloaded from the internet. The message I get is "windows cannot access the specified device path or file. you don't have the appropriate permissions to access the item "."

    I tried,

    • Safe mode (not to fix)
    • (No luck) system restore
    • check security options - I have full access to the file.

    I am running Vista 32 bit. I have avast antivirus running, but is not working and im unable to uninstall it.

    Any help will be accepted with gratitude,

    Thanks in advance,

    Chris.

    PS I'm the system administrator.

    I do not fashion without failure, I advised a SafeMode with networking for network access using a wired connection to download and install Anti-Malware programs.

    If this does not work:

    Download/save the removal of Avast on a friend's computer tool > transfer it using a Flash Player > uninstall the corrupt Avast.

    Which can be the source of the problem.

    As you can not turn it off:

    If under warranty, contact the manufacturer of your laptop.

    If this is not the case, take it to a reputable repair shop, computer room.

    Mick Murphy - Microsoft partner

  • Windows cannot access the specified device, path or file. You can not have the appropriate permissions to access the item.

    Hello

    I recently changed to use AVG free Antivirus Vista 2010 edition and since then (next day) seems to be locked out almost everything on the computer other then IE.  Open any kind of .exe translates into "Windows cannot access the specified device, path or file. You don't have the appropriate permissions to access the item. "I can access the Control Panel, but when I try to run something (a user restore Sys account) nothing happens or I get the same error.  I can not even access/cmd?

    Operating system is vista 64 bit home premium
    Computer has 1 which is defined as administrator SP1
    Tried to do a restore of the system in normal mode and safe, the two will not start.

    I have a feeling I know what the problem is, that when you look at the properties > Security "Progam files" in the 5 groupnames user administrator has not enabled in the lower area of permissions?  Guess a virus has locked all accounts to use the machine key files? (When editing and allowing the admin to have full control etc. in written authorization, I get an "access denied" Message.)  Be honest this really problems out of my PC knowledge, I would usually just reformat if I hit I can't solve a problem, but this time reformating is not the best option.

    Thanks in advance for any help, I would really appreciate it, it left me speechless!

    PS. read through the similar questions and have used the "fix windows' programs, with nothing working or me being not able to access something used.

    Hi Dany88,

    First of all, I would say that you uninstall security antivirus vista 2010 of computer software, since there are several questions on the computer after installing. This software may have created conflicts between other programs on the computer.

    As you face problems to access items from 'Control panel', I would say you visit the security software vendor's Web site and search a tool of suppression using which you can uninstall the software.

    Important: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

    If questions are set after uninstalling security software, I suggest that you change the security antivirus vista to some else software or contact the vendor of the software for more information.

    I would also say that you are investigating the computer by using the methods mentioned in the link below.
     
    How to get rid of malware or viruses
    http://social.answers.Microsoft.com/forums/en-us/vistasecurity/thread/ba80504b-61f1-4D71-960f-b561798b7b42

    See the link below to find out how to start in safe mode.
    Start your computer in safe mode
    http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

    I hope this helps!

    Halima S - Microsoft technical support.
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Error: "the process cannot access the file because it is being used by another process." when treid to install the device driver

    Original title: Windows cannot install the drivers

    I had a lot of trouble installing the drivers on my Windows computer.  I went straight in the Device Manager and deleted the devices I tried to install and reinstalled them, I went into safe mode, I got Windows to run the console and only the basic process and run from there Device Manager... no matter what I do the same mistake.

    "The process cannot access the file because it is being used by another process".

    Even after a restore of the system, he did this, and I don't know what to do anymore.  Only devices that have been previously installed work.

    What's more important install my Blackberry software because my phone is broken.  The software cannot detect my phone because the drivers have not been installed.  Most of the devices I can use with Linux (I have Windows Vista and Ubuntu running on the same computer), but RIM don't make Blackberry for Linux software, so I have to do it on Windows.

    Hi paco2012,
     
    1. did you of recent changes on the computer?
    2. how many user accounts you have on the computer?
     
    Try these steps and check the result.
    Step 1: Install the driver as an administrator
    a. shut down the computer runs.
    b. start the computer and the connection as an administrator.
    c. find the driver configuration file, right-click on the file and click "Run as Administrator".
    d. follow the instructions in the wizard to install the driver.
    e. restart the computer once the driver is installed.
     
    Step 2: Try to install the driver to boot either by disabling all non-Microsoft programs
    a. open the article: http://support.microsoft.com/kb/929135
    b. Article, follow "step 1: perform a clean boot."
    c. restart the computer.
    d. install the driver and verify the result.
    e. follow "step 7: reset the computer to start as usual.
     
    Kind regards
    Syed - Microsoft technical support.
    Visit our Microsoft answers feedback Forum and let us know what you think.
  • Error: Windows cannot access the specified device, path or file. You can not have the appropriate permissions to access the item. Vista 32 bit

    Hi, I got this error. Ex: I try to install something (a game or whatever it is) it says: 'Windows cannot access the specified device, path or file. You can not have the appropriate permissions to access the item. Even when I try to open a normal program like Regseeker, he keeps giving this error. Can someone help me?

    It appeared yesterday at 22:00. I tried the system restore, but it does not help, he keeps coming back.

    I use Windows Vista Home premium x32bit.

    Thank you

    Xemidan

    I ran my computer in safe mode with network support. As I re-installed programs that have these problems, the family disappeared from the error.

    Now, they're starting to the top and download things exactly as they were normally. In any case, thanks for the help.

  • On my user account on my labtop when I click on a program, such as mozilla firefox, it happens 'windows cannot access the specified device, path or file. May not be the appropriate permissions for access you point. "Please help

    On my user account on my labtop when I click on a program, such as mozilla firefox, it happens 'windows cannot access the specified device, path or file. May not be the appropriate permissions for access you point. "This message appears for firefox, AVG, Windows live messenger, windows MediaPlayer etc.

    I can access my documents, Panel etc. and everything is there, but it won't let me not get access to the programs.

    Also when I go to click on itunes and open office it happens "this file has no program associated with it for performing this action. Create an association in the set associations Control Panel.

    Given that I was able to access control panel, I was able to create a new user and use it for now to send this message and all programs have worked on it and I was able to check for the presence of viruses on the Avg on this and everything was clear.

    Could you please explain whats wrong and tell me how to fix this please: D thanks

    Hello
     
    1. don't you make changes before the show?
    2. is the computer is joined to the domain controller?
     
    You can not start any application on a client computer that is joined to the domain controller. When you try to start this type of application, you receive an error message similar to the following:
    "Windows cannot access the specified device, path or file. You can not have the appropriate permissions to access the item.

    This can also occur if the user account is damaged. If the computer is not connected to a domain controller, try the following steps.
    1. connect to another user account and create a new user account to fix the damaged user account.
    For more information about creating a new user account and the fixing corrupt user account, visit this link: http://windows.microsoft.com/en-US/windows-vista/Fix-a-corrupted-user-profile
     
    Previous post the results in more detail, so that we can help you further.
     
    I hope this helps.
     
    Kind regards
    Syed
    Answers from Microsoft supports the engineer.

  • error message "Windows cannot access the specified device, file, or the path."

    Whenever I try to open a file even my music internet explore or anything that I get an error message Windows cannot access the specified device, path or file.

    Hi nanditaberi,

    Since when are you facing this problem? What were the changes to the system between the time where everything has worked, and when you noticed the problem?

    This problem may be caused by this security software on the computer, uninstall them might solve the problem.

    Example: AVG, Zone Alarm

    Important:

    O before you uninstall the security software disconnect the computer from the internet. Make sure that the windows firewall is enabled.

    Ø you may need to check with the manufacturer of security software for reinstallation and activation.

    O re - install the security software on the computer.

    Reference:

    Please read the steps provided by, Donna, dated Saturday, January 3, 2009 14:01click here for the post.

    A scanner online for any threat and try to correct

    http://OneCare.live.com/site/en-us/Center/cleanup.htm

     

    Thank you, and in what concerns:

    Ajay K

    Microsoft Answers Support Engineer

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Error when you try to play audio files: Windows Media Player cannot access the file. The file may be in use, you won't have access to the computer where the file is stored

    Windows Media Player cannot access the file. The file may be in use, you won't have access to the computer on which the file is stored, or your proxy settings are may not be incorrect.

    I hope someone can help on Win 7 64 bit, music is taken on a disk usb2 external hard... I had no problem until today when the message in the title appeared next to each track, with a little red cross.

    I already deleted database library as suggested by some of the forums, also disabled the media as a feature of Win 7, rebooted and then re-enabled it.  I also disconnected externally and restarted that as well, I'm also the same mistake with a cd in the cd drive as well.

    Can anyone help?

    Hello

    This error may occur for one of the following reasons:
    The file is currently in use. Close the file and then try again.

    You are not allowed to access the location where the file is stored.

    Follow these steps to grant all permissions in the folder where the files are stored:
    1. right click on the folder on the external drive and click Properties.
    2. in the Properties window, click on Security tab.
    3. now, click Edit , and then click Add.
    4. now, type everyone in the box and click OK.
    5. check the full control box.
    6. click on apply and then click OK.

    You can also try the mentioned below as follows:

    1. click on start.
    2. go in Control Panel.
    3. Select "SOUND".
    4. double-click on speakers.
    5. click on the tab advanced and then uncheck the enable audio enhancements.

    Kind regards
    Amal-Microsoft Support.
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Windows - Windows cannot access the particular device, path, or file

    Original title: retirement

    I am trying to install a program to recover passwords. But when I open the program through the start mode displays an indicator saying the following: 'Windows cannot access the particular device, path or file.  "You won't have the appropriate permissionsto access the item" the strange thig is I installed running as administrator, which, I presume, have all the rights.  Tell me where to go to eliminate this obstacle.

    Hello

    I'm sorry, but in the policy framework from Microsoft for this community, we can not help you this question.

    ___________________________________

    Microsoft prohibits any help given in these Forums for you help bypass or "crack" passwords lost or forgotten.

    Here's information from Microsoft, explaining that the policy:

    http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-security/keeping-passwords-secure-Microsoft-policy-on/39f56ef0-5d68-41AD-9daa-6e6019c25d37

    See you soon.

Maybe you are looking for

  • Satellite P10 - 792 lock ups / crashes and battery

    I used my P10 792 even since I bought it 3 years ago. S there was a decreasing battery box that appears on my screen (sometimes) say I should replace the badly inserted battery and restart my computer. If there is also a problem mouse touch pad. He t

  • Damaged file host

    Adobe tell me that my PC has a corrupted file. Is someone can you please tell me how to get this fixed, thanks

  • I shared my windows now I don, t know how to get back to normal

    What should I do

  • 15 - b005eo

    On the form of "HP pavillion ultrabook 15-b005eo" in the "Memory" section, it says the computer this memory 2 x 4 GB installed which is 8GBs of memory total. However on the 'max memory' it says that memory is expandable to 8GBs that means he already

  • What the blackberry in different development and another middlet

    Hi all Ask a lack on the development of an application using blackberry combined. but before that, after I install everything about blackberry like eclipse and Simulator, I always have a problem with blackberry program. I did read a tutorial on black