Cannot access the files on Win10 side of VMWare after update

Similar Questions

• I want to save my outlook.pst file but get the following error message:-impossible to copy outlook: the process cannot access the file because another process has locked a portion of the file.

  I want to save my outlook.pst file but get the following error message:-impossible to copy outlook: the process cannot access the file because another process has locked a portion of the file. How can I unlock it please?

  You have Outlook open when you save? You need to close.

  Hope this helps

  Post back if necessary

  ___________________________________________________________

  If this post can help solve your problem, please click the 'bookmark' or 'Yes' to this message button. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• System 32 error (0x00000020): "the process cannot access the file because it is being used by another process.". The operation to open the file will fail with error - 1032 (0xfffffbf8(JET_errFileAccessDenied))"

  Original title: svchost (1020)

  Event type: error
  Event source: ESENT
  Event category: general
  Event ID: 490
  Date: 2010-10-19
  Time: 14:51:34
  User: n/a
  Computer: ROB
  Description:
  Svchost (1020) an attempt to open the file "C:\WINDOWS\system32\CatRoot2\{127D0A1D-4EF2-11D1-8608-00C04FC295EE}\catdb" for read / write access failed with the error System 32 (0x00000020): "the process cannot access the file because it is being used by another process.".  The operation to open the file will fail with error - 1032 (0xfffffbf8(JET_errFileAccessDenied)).

  For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.

  Hi Robrw,

  1. when exactly you receive this error?

  2. don't you make changes to the computer before this problem?

  You can try to rename the catroot2 folder and check if it helps.

  Step 1:

  a. Click Start and in run type C:\windows\system32 and click ok

  b. find the Catroot2 folder. Right-click on Catroot2 and rename it to Catroot2.old

  If you are not able to do the normal mode, try to start in safe mode and rename

  Check out the link for more information on starting your computer in SafeMode below:

  http://support.Microsoft.com/kb/315222

  Step 2:

  If you are unable to access the catroot2 folder, and then try to change the permissions on the files and check if it helps.

  See the following article:

  How to capture a file or a folder in Windows XP

  http://support.Microsoft.com/kb/308421

  Step 3:

  You can also try to temporarily disable third-party security software and firewalls and check what is happening.

  Note: Activate the security software after the resolution of the problem.

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• When I receive e-mails with an attachment can not open, it says: Windows media player cannot access the file, Please HELP

  WHEN I RECEIVE AN EMAIL WITH AN ATTACHMENT I CAN'T OPEN IT. IT SAYS WINDOWS MEDIA PLAYER CANNOT ACCESS THE FILE.

  Help, please

  How this is related to Windows Update, John?

• Error: "the process cannot access the file because it is being used by another process." when treid to install the device driver

  Original title: Windows cannot install the drivers

  I had a lot of trouble installing the drivers on my Windows computer.  I went straight in the Device Manager and deleted the devices I tried to install and reinstalled them, I went into safe mode, I got Windows to run the console and only the basic process and run from there Device Manager... no matter what I do the same mistake.

  "The process cannot access the file because it is being used by another process".

  Even after a restore of the system, he did this, and I don't know what to do anymore.  Only devices that have been previously installed work.

  What's more important install my Blackberry software because my phone is broken.  The software cannot detect my phone because the drivers have not been installed.  Most of the devices I can use with Linux (I have Windows Vista and Ubuntu running on the same computer), but RIM don't make Blackberry for Linux software, so I have to do it on Windows.

  Hi paco2012,
   
  1. did you of recent changes on the computer?
  2. how many user accounts you have on the computer?
   
  Try these steps and check the result.
  Step 1: Install the driver as an administrator
  a. shut down the computer runs.
  b. start the computer and the connection as an administrator.
  c. find the driver configuration file, right-click on the file and click "Run as Administrator".
  d. follow the instructions in the wizard to install the driver.
  e. restart the computer once the driver is installed.
   
  Step 2: Try to install the driver to boot either by disabling all non-Microsoft programs
  a. open the article: http://support.microsoft.com/kb/929135
  b. Article, follow "step 1: perform a clean boot."
  c. restart the computer.
  d. install the driver and verify the result.
  e. follow "step 7: reset the computer to start as usual.
   
  Kind regards
  Syed - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• RunDLL__Error C:\windows\system32\sshnas.dll___The loading process cannot access the file because it is being used by another process.

  When I start windows Vista, I get the error message:

  RunDLL
  Error loading C:\windows\system32\sshnas.dll

  The process cannot access the file because it is being used by another process.

  How can I fix?

  Hello

  It is the result of malware, then do a very thorough check and when the system is
  clean see the following message to remove this error.

  If you need search malware here's my recommendations - they will allow you to
  scrutiny and the withdrawal without ending up with a load of spyware programs running
  resident who can cause as many questions as the malware and may be more difficult to detect as the
  cause.

  No one program cannot be used to detect and remove any malware. Added that often easy
  to detect malicious software often comes with a much harder to detect and remove the payload. Then
  its best to be thorough than paying the high price later now too. Check with them to one
  extreme overkill point and then run the cleaning only when you are sure that the system is clean.

  It can be made repeatedly in Mode safe - F8 tap that you start, however, you must also run
  the regular windows when you can.

  Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone.
  (If Rootkits run UnHackMe)

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Malwarebytes - free
  http://www.Malwarebytes.org/products/malwarebytes_free

  Run the malware removal tool from Microsoft

  Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

  You should get this tool and its updates via Windows updates - if necessary, you can
  Download it here.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
  (Then run MRT as shown above.)

  Microsoft Malicious - 32-bit removal tool
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

  Microsoft Malicious removal tool - 64 bit
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

  also install Prevx to be sure that it is all gone.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Prevx - Home - free - small, fast, exceptional CLOUD protection, working with others
  security programs. It is a single scanner, VERY EFFICIENT, if it finds something to come back
  here or use Google to see how to remove.
  http://www.prevx.com/   <-->
  http://info.prevx.com/downloadcsi.asp?prevx=Y  <-->

  Choice of PCmag editor - Prevx-
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  Try the demo version of Hitman Pro:

  Hitman Pro is a second scanner reviews, designed to save your computer from malicious software
  (viruses, Trojans, rootkits, etc.). who infected your computer despite safe
  what you have done (such as antivirus, firewall, etc.).
  http://www.SurfRight.nl/en/hitmanpro

  --------------------------------------------------------

  If necessary here are some free online scanners to help the

  http://www.eset.com/onlinescan/

  -----------------------------------

  Original version is now replaced by the Microsoft Safety Scanner
  http://OneCare.live.com/site/en-us/default.htm

  Microsoft safety scanner
  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  ----------------------------------

  http://www.Kaspersky.com/virusscanner

  Other tests free online
  http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

  --------------------------------------------------------

  Also follow these steps for the General corruption of cleaning and repair/replace damaged/missing
  system files.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
  RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker
  (SFC.exe) program generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------------------------------

  If we find Rootkits use this thread and other suggestions. (Run UnHackMe)

  http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/a8f665f0-C793-441A-a5b9-54b7e1e7a5a4/

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• Error when you try to play audio files: Windows Media Player cannot access the file. The file may be in use, you won't have access to the computer where the file is stored

  Windows Media Player cannot access the file. The file may be in use, you won't have access to the computer on which the file is stored, or your proxy settings are may not be incorrect.

  I hope someone can help on Win 7 64 bit, music is taken on a disk usb2 external hard... I had no problem until today when the message in the title appeared next to each track, with a little red cross.

  I already deleted database library as suggested by some of the forums, also disabled the media as a feature of Win 7, rebooted and then re-enabled it.  I also disconnected externally and restarted that as well, I'm also the same mistake with a cd in the cd drive as well.

  Can anyone help?

  Hello

  This error may occur for one of the following reasons:
  The file is currently in use. Close the file and then try again.

  You are not allowed to access the location where the file is stored.

  Follow these steps to grant all permissions in the folder where the files are stored:
  1. right click on the folder on the external drive and click Properties.
  2. in the Properties window, click on Security tab.
  3. now, click Edit , and then click Add.
  4. now, type everyone in the box and click OK.
  5. check the full control box.
  6. click on apply and then click OK.

  You can also try the mentioned below as follows:

  1. click on start.
  2. go in Control Panel.
  3. Select "SOUND".
  4. double-click on speakers.
  5. click on the tab advanced and then uncheck the enable audio enhancements.

  Kind regards
  Amal-Microsoft Support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• executable files: cannot access the file because it is being used by another process

  Hello
  I created a file named test.bat on my desk
  baptized "test.bat" and sent the notebook, wrote "REM" and recorded.
  so, I closed my notebook and reopened, has added another "REM" and saved the file again.
  then I tried to rename, move the file to another folder and delete
  everything went without any problems.

  But if I create the file and run it, the command prompt will appear for a while and then disappear.
  I can rename or move the file without any problem,
  But if I try to edit the file in Notepad, I get this error:

  The process cannot access the file because it is being used by another process.

  and the file is not saved.

  also, if I try to delete the file, it seems to be deleted until I press F5, the file appears again.
  When you try to rename/move this new file, I get another error:

  File Access Denied

  You need permission to perform this action

  You need the permission of the administrator of the computer to make changes
  in this file

  It seems the file is opened (or if I choose to delete) after a few minutes, then it is not if I try to access
  the file (I kept pressing F5 every few seconds for 15 minutes and the file is missing)

  the problem appears if occuar with any file name, anywhere, not just the office or home by car, not even on the same disk,
  while I had no problem when I started in an old installation of windows xp and repeat the same steps.

  I tried to use the sysinternals utility handle, that's what I have:

  After creating test.bat:
  C:\Users\User>handle test.bat

  Copyright (C) 1997-2013 Mark Russinovich
  Sysinternals - www.sysinternals.com

  No found the corresponding handle.

  After you run test.bat:

  C:\Users\User>handle test.bat

  Handle v3.51
  Copyright (C) 1997-2013 Mark Russinovich
  Sysinternals - www.sysinternals.com

  System pid: 4 type: file A18: C:\Users\User\Desktop\t
  EST.bat

  has obtained the result above after attempting to remove test.bat also.

  After the creation of othertest.bat:

  C:\Users\User>handle othertest.bat

  Copyright (C) 1997-2013 Mark Russinovich
  Sysinternals - www.sysinternals.com

  No found the corresponding handle.

  After execution of othertest.bat:

  C:\Users\User>handle othertest.bat

  Handle v3.51
  Copyright (C) 1997-2013 Mark Russinovich
  Sysinternals - www.sysinternals.com

  System pid: 4 type: BD0 file: C:\Users\User\Desktop\o
  thertest.bat

  After you rename the othertest.bat:

  C:\Users\User>handle othertest.bat

  Copyright (C) 1997-2013 Mark Russinovich
  Sysinternals - www.sysinternals.com

  No found the corresponding handle.

  C:\Users\User>handle renamedtest.bat

  Handle v3.51
  Copyright (C) 1997-2013 Mark Russinovich
  Sysinternals - www.sysinternals.com

  System pid: 4 type: BD0 file: C:\Users\User\Desktop\r
  enamedtest.bat

  the also occuars when I run any .exe file and delete it after its finished running, I deleted
  the handle.exe and the handle64.exe after the test above and at the same time returned when I updated their records.

  can someone help me?
  IAM using Windows 7 ultimate 64-bit.
  Thank you.

  I struggled with this VERY ENNUYANT thing for a long time on a Windows Server 2008 R2.

  Just found the answer:

  http://superuser.com/questions/260375/why-would-system-continue-locking-executable-file-handles-after-the-app-has-exit

  Activation of the service 'Application Experience' does the trick for me.

  If I got paid for every minute spent dealing with the mysteries of Microsoft... No, wait! Paid!

  Thank you Microsoft!

• Cannot open programs and files error: windows cannot access the file or the path of the specified unit. you don't have the appropriate permissions to access the item

  Original title: Search programs and files will not let me

  I get no response from the search - when I hit to see more results I request = aa indicating that windows cannot access the file or the path of the specified unit.  you don't have the appropriate permissions to access the item

  Hello

  1. don't you make changes to the computer until the problem occurred?

  2 when was the last time it was working fine?

  3 are you facing this problem only with Web sites or other sites also?

  I suggest you try the steps below and check if it helps

  Step 1:
  Try to start the computer in safe mode with network and check if the same error message, here is the link:

  http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode

  Step 2:
  However, to work around the problem, try the step below:

  a. right click on the program file, select Properties.

  b. on the general tab, at the bottom, you will see listed in the issue of safety: this file came from another computer and might be blocked to help protect this computer.

  c. unlock.

  d. click on apply.
  e. click OK.

  Hope this information is useful.

• Error message: "Windows Media Player cannot access the file. The file may be in use, you won't have access to the computer on which the file is stored, or your proxy settings are may not be incorrect. »

  Original title: problems of residential group after system recovery

  I started a homegroup on my computer.  I added another computer to the homegroup.  Everything worked fine until I had to perform a system recovery on the laptop that I used to start the homegroup.  I implemented the homegroup again, but I can't access the files on the other computer via Windows Media Player.  I get an error message that says "Windows Media Player cannot access the file. The file may be in use, you won't have access to the computer on which the file is stored, or your proxy settings are may not be incorrect. "I can access all the music files via Windows Explorer.  I have to start over with a new password?  Can I just create a new homegroup?  What other options do I have?  You can provide any help would be greatly appreciated.  Thank you.

  Hello

  Please follow the methods and check the issue:

  Method 1:

  Open the homegroup troubleshooting utility:

  http://Windows.Microsoft.com/en-us/Windows7/open-the-HomeGroup-Troubleshooter

  Method 2:

  Why can't I access my homegroup? :

  http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-access-my-HomeGroup

  For reference:

  Homegroup: frequently asked questions:

  http://Windows.Microsoft.com/is-is/Windows7/HomeGroup-frequently-asked-questions

  Method 3:

  See the steps in "include a folder shared in a library" from the link below:

  Access to files and printers on other homegroup computers: http://Windows.Microsoft.com/is-is/Windows7/access-files-and-printers-on-other-HomeGroup-computers

  I hope this helps.

• Windows Media Player error "Windows Media Player cannot access the file. Is the file may be in use, you won't have access to the computer... »

  When you try to download an audio conference on Windows Media Player class, the following notification: Windows Media Player cannot access the file. The file may be in use, you won't have access to the computer on which the file is stored, or your proxy settings are may not be incorrect. I was able to download in the past but now cannot. Any suggestions?

  In WMP, find the tab "Tools", "upper task bar", Search tab options when pressed.

  In the new properties window, change the tabs, connections would determine internet

  speed adjustment... Change all.

• Unable to connect to the application Windows 8 music. I get an error "Cannot access the file."

  Hello

  When I open the Windows 8 Xbox music app I can't connect. Here's the exact error code.
  "Cannot access the file. Make sure that the file is not in use, you can access the file is stored, and that your network proxy settings are correct, and then try again.
  Error code: 0xc00d11d2 (0x80070005)
  I can sign in all other Windows 8 modern Apps without problem.
  Thank you
  Andy

  I created a local account and recreated my Windows Live profile and that fixed the issue.

  Thanks for your help.

• cannot access the file preview activex before

  Trying to get a glimpse of my presentations, I get a cannot access the file activeX1.xml error message. This happens in all my presentations.  I use PowerPoint 2013 and presenter 11 Pro.

  ISpring Solutions guys have managed to develop a tool that solves your presentations of objects Flash broken

  http://www.ispringsolutions.com/blog/how-to-restore-a-PowerPoint-file-corrupted-by-Flash/

  It seems that they also provide a more product iSpring with similar functionality to Adobe Presenter

• How can I fix this error: DF024: unable to preserve the original file to... Error 32 the process cannot access the file because it is being used by another process. SEQ (1352).  ?

  I install creative cloud desktop application Illustrator on a machine with windows 7 64 bit running in a domain environment.  The download begins and takes about runs for a bout 10 minutes and then stops with error: DF024: impossible to preserve the original in "C:\Program Files\Adobe\Adobe Illustrator CC 2014\Support Files\Contents\Windows\AdobeLinguistic.dll" file error 32 the process cannot access the file because it is being used by another process. SEQ (1352)

  I am logged on as network administrator, and there is no other apps except a web browser (Chrome) running.  There is no other users logged in to the machine.

  How can I see what another process is using the file necessary so that I can fix it?

  Thank you

  MelissaB34 if you continue to face the difficulties of installation, you can also try to use the CC cleanup tool to help ensure a clean removal of the software.  You can find more information, as well as a link to download the CC cleaning tool, to use the CC cleaning tool to resolve installation problems. CC, CS3 - CS6 - http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html.

• Cannot access the file

  We have implemented a cluster and our hosts, added vmkernel and have the right licenses. The migration option is available, but then we get the error message "cannot access the virtual machine configuration: cannot access the file [storage]" I thought about is because they do not work on a shared storage...

  I had to think about iSCSI, but have not tried it before, and now I ask you, is the most optimal solution? We will cable from the server to the top with a SAS cable,

  The servers are located in different parts of the building, I could put the other to the first server and their cable it but to avoid this, is there another solution? I can't use the data storage "migrate" since I don't have essential vmware more...

  you need external shared storage and follow the right cable FC, iSCSI, or SAS. You can not just a two-server cable upward with a SAS cable and expect it to work like the discs are still local only. the other option is to search for virtual storage in which transform your disks local shared iSCSI volume