Cannot access the he DVD drive in Windows Vista. Error: This device cannot start. (Code 10)

Similar Questions

• How can I change the default DVD drive in Windows 7 pro?

  How can I change the default DVD drive in Windows 7 pro?

  The following did not work.
  1 Control Panel / autplay
  It only allows me to choose media player or nothing

  2 Control Panel / default of programs
  -file types associations do not change the automatic boot to DVD drive
  -the default programs watch only with no. microsoft applications add option application
  -access and default computer program; This made a mess when I tried not microsoft!

  3. computer / rt - click the device DVD did not help there is no command 'open with '.

  You might have switched to the control panel view all items.
  Click Start > default programs and click Change AutoPlay settings. -Ramesh Kumar http://www.WindowsValley.com

• Sdatellite M100 does not recognize the CD/DVD drive in Windows XP

  It is listed in the Device Manager, but with a yellow explanation mark.
  No mention of this in my computer.
  No icon.

  I am able to open the drawer and I put several types of cd/DVD in them without any result.
  The light flashes in orange on the door. The drive is listed as "Mat * advd-ram uj - 841 s-(sm)" in the bios under boot devices.

  I'm trying to figure out how to remove the drive and reconnect but it seems that I have to disassemble the thing to do and hesitate without a diagram.

  It is only a user guide in the downloads on this site so any help is appreciated: 0)

  Oh, I also downloaded the driver from this site for the drie. Before that, I uninstalled the drive in Device Manager, but there was no change when I installed the downloaded driver.

  Simply using a Ubuntu Linux live cd and it is running.
  Unfortunately its going to be hard to know for sure what the problem in this way because I don't want to install ubuntu on this machine it is someone elses machine and they are far from would you like to try linux.

  I'm in a live session now.
  Ah ok when I go in the media folder there is no mention of the cd/dvd drive.

  It is really a problem unless I can unplug physically the Mo and reconnect: 0 (Oh wait here it... is under 'cdrom' folder ' but only files with a relevance to the side by side with windows installation are mentioned... exe files, wubi etc..)

  Ah ok that's beyond my experience.
  Can someone give this amateur a tip?

  First remove the player of ODD (CD/DVD) from the list in Device Manager.
  Then access the registry and delete the Upperfilters and Lowerfilters completely from the following registry key values:

  HKEY_LOCAL_MACHINE \ FAT32\ CurrentControlSet \ Control\Class {4D36E965-E325-11CE-BFC1-08002BE10318}

  Finally, you must restart the device.

  Once again, windows will recognize the STRANGE

• How can I get the utility auditor of system files (SFC) in Windows XP to search for the source files on a CD in a CD/DVD EXTERNAL drive instead of the CD/DVD drive internal Windows?

  I use a Dell Dimension E310 PC running Windows XP Media Center Edition.  The CD/DVD drive has stopped recognizing CD long ago.  (He still recognizes DVD but not CD).  I use an external drive to CD/DVD of Asus.  I keep getting messages that Windows need to replace versions unrecognized some Windows file and asks me to insert my source CD into the CD/DVD drive.  I checked the MS Knowledge Base and got instructions on how to use the utility (SFC) System File Checker to replace the unrecognized Windows files.  I started the process and inserted the source of CD files (recovery CD provided by Dell with the PC when I bought it) in the drive of external CD/DVD, but the SFC would not recognize it it.  He just kept asking me to insert the CD of source files in the CD/DVD drive.  So I have to find a way to get the SFC utility to find files in the external CD/DVD drive source - or I have to take the PC to the Geek Squad, buy a new CD/DVD drive and get them to install it.  Would appreciate any help you can provide.

  GO to start > run > regedit
  Access
  HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Setup

  SourcePath = X:

  Where X: is the drive letter of your CD/DVD

• Cannot find my cd/dvd drive in windows Vista after system recovery

  I tried all the everything in this forum that I found, but I still can't my dvd player to show up anywhere there was here a few days and I had to perform a full recovery of the system and now its does not can someone please give me some ideas so I can use my dvd again drive?

  I have more upper and lower filters

  I am running sp2 and fixit program isn't helping me

  I have a HP Pavilion 9700US

  Hello

  Check with HP Support, their online documentation and drivers, and their known forums
  questions.

  Support HP & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  ----------------------------------------------------------------------------------------------------------

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• How to access the cd/dvd drive to replace?

  I need to replace the cd/dvd drive and cannot find a way to access it after unscrewing the back - all of the panel does not seem to take off.  Thank you!

  Here is your manual:

  Manual

  Page 58

• Installation of driver with PXI-8360 error "this device cannot start - Code 10"

  While trying to install PXI-6541 to the PXI-1036 chassi with controller PXI 8360 [express-8360 side laptop], the error message "this device cannot start [Code 10]" laptop is Lenovo T60 with the latest version of the BIOS

  Thank you

  Manu

  Sounds great Manu,

  I also followed on that for you, then you should be getting approval sometimes today.

  I hope for the best

• Can not read the CD/DVD drive in Windows 8. Medion Akoya PC

  I'm under win8 on a Medion Akoya P2004DR.

  I can't find any drive letter assigned to the cd/dvd under 'The PC'

  In the Manager devices, CD-ROM/DVD-Rom readers, tsstcorp cddvdw sn208-bb, has a yellow triangle next to him, with a black exclamation point inside.

  CD/DVD set the convenience store for win8 no repair.

  Troubleshooting of hardware/devices utility recognized the problem and offers to download and reinstall the driver, but able to download the driver.

  Some other online solutions provided, mention changing the registry keys, but they don't seem to have the same positions in submenus of the registrys as I do.

  Can anyone help please? Thank you.

  I'm under win8 on a Medion Akoya P2004DR.

  I can't find any drive letter assigned to the cd/dvd under 'The PC'

  In the Manager devices, CD-ROM/DVD-Rom readers, tsstcorp cddvdw sn208-bb, has a yellow triangle next to him, with a black exclamation point inside.

  CD/DVD set the convenience store for win8 no repair.

  Troubleshooting of hardware/devices utility recognized the problem and offers to download and reinstall the driver, but able to download the driver.

  Some other online solutions provided, mention changing the registry keys, but they don't seem to have the same positions in submenus of the registrys as I do.

  Can anyone help please? Thank you.

  Never mind. I just uninstalled and restarted, which automatically reinstalled the driver and its working now.

• Tecra 9100: After the CD/DVD drive upgrade IDE #1 error apears

  Hello!

  I'm a happy user of Toshiba laptops, and I like my Tecra is even older. My setup is a PIVm 2.0 Ghz and a few days, I changed the HARD drive. This isn't THE PROBLEM.

  Now, I have a 80 GB Seagate HDD and works very well. Days ago, I bought a DVD - RW, H - L space (Hitachi-LG) GWA-4082N, origin of another towing specifications.

  When I boot the IDE #1 ERROR message is displayed. In windows works fine, recognized as the secondary Slave PIO mode only. I am integrating then, I searcehd the web and found solutions.

  I've read on C - SALT and reversed the master/slave issue. I downloaded a firmware for Toshiba, same version for my DVD but nothing. In my opinion, is for Toshiba, but not for this model. So I tried the solution of jumper pins 45 & 47. 47 pins Cable sync/select and 45 is identical to 48 GND.

  The solution is good half. I started the laptop and does not work, no more ERROR IDE. In windows is now secondary master UDMA Mode. Works very well...

  THE PROBLEM: it's that I turn off the laptop, pick up the DVD, battery and Commander edge and when I reconected all back, the #1 ERROR IDE is sown again :(((.) Therefore, works, but sometimes it is not. What is the problem? Even with the 45 & 47 pins the message. I have readit pins 35, 36 is something CSEL0, CSEL1...

  I do more short films? Or where I can find a good firmware for my drive or the software to mass the firmware...

  Please read this post and I hope you can help me!

  Hello

  As you already know not all ODD is compatible with a laptop because masters /slave and c - salt settings.
  These parameters are controlled by a firmware and most often but not always these firmware located on sites of car manufacturing.

  I don't think you'll find this firmware on the Toshiba site. It s recommend buying the good player but don't not to Flash the firmware.

  Anyway, I also found the statement on the connection of the PIN 45 and 47 together.
  This is a solution in time and not recommended because it will damage the other pins.

• How to access the USB secure key on windows vista, I get the message that application 10004 could not find any JumpDrive Secure device connected to your system

  Original title: how access key USB secure Windows vista

  I have a lexar player sure to jump that I used with an old computer that has Windows XP.  I now have a new computer with Windows Vista and I can't access the secure part of the USB key.  When I try to access the part secure the USB key I have the following message "Application [-10004] could not find any JumpDrive Secure device connected to your system. Please make sure that your JumpDrive Secure device is inserted into a USB port".

  Of course, the USB key is inserted into the USB port.  If anyone can help find me a way to access the part secure the USB key I would appreciate it.  Thank you.

  Hi Jon0909,

  The error that you received can be for several reasons. I suggest you try the following steps:

  Method 1: Run the fixit available in the link below and check if that makes a difference

  Tips for solving problems of USB devices

  Method 2: This normal matter as a result of a conflict between the USB and other USB (Universal Serial Bus) connected to the computer.

  (a) disconnect all the external devices connected to the computer to expect the mouse and keyboard, check if your USB key works.

  (b) If this solves the problem, and then add back both devices until you discover the piece of hardware causing the issue.

  If the problem persists, you can contact the manufacturer of the device for any known issues
  http://www.Lexar.com/support

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer
  ---------------------------------------------------------------------------------------------------------
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Cannot access the cd/dvd drive

  I use a laptop Toshiba A300, I do not have cd driver icon in the Control Panel, but the driver is present, I installed the latest service pack tried to update and restore drivers - getting error code 19, even the microsoft fix, this site could not solve, I'm stupid or what?

  Hi BJGreen,

  Thanks for posting your question.

  Please follow the suggestions listed below.

  Step 1:

  Since you have already tried the FIXIT tool and it didn't quite good; I recommend you try to change the registry manually, because it is more reliable. To do this the steps (from http://support.microsoft.com/kb/314060 ) mentioned below.

  1) click Start and then click all programs.

  2) click Accessories, and then click Run.

  (3) type regedit and then click OK.

  If you are prompted for an administrator password or a confirmation, type the password, or click on allow.

  (4) in the navigation pane, find and then click the following registry subkey:

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  (5) in the right pane, click UpperFilters.

  Note You can also see an UpperFilters.bak registry entry. You don't have to delete this entry. Click UpperFilters. If you do not see the UpperFilters registry entry, you may still have to delete the LowerFilters registry entry. To do this, go to step 8.

  (6) on the Edit menu, click on delete.

  (7) when you are prompted to confirm the deletion, click Yes.

  (8) in the right pane, click LowerFilters.

  Note If you do not see the LowerFilters registry entry, unfortunately this content cannot help you. Go to the section "Next steps" to learn how you can find more solutions or more help on the Microsoft Web site.

  (9) on the Edit menu, click on delete.

  (10) when you are prompted to confirm the deletion, click Yes.

  (11) exit the registry editor.

  (12) computer.

  Step 2:

  If you have installed a CD/DVD burning software recently, then I recommend you to uninstall and check if the problem is resolved and then reinstall it.

  Kind regards

  Cedric M

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think

• Pavillion Slimlines5220y: System does not detect the CD/DVD drive after Windows Installer 10

  Since the upgrade to Windows 10, my PC only "sees" the drive to CD/DVD. CD/DVD is a DVD SuperMulti burner with LightScribe technology

  Hello:

  See if the procedure that is listed in the resolution step 5 on the link below solves the problem.

  https://support.Microsoft.com/en-us/KB/314060

• After dismantling Satellite A60 cannot detect the CD/DVD drive

  Hello

  I opened my laptop to clean-up and it was the first time that I never opened a laptop. Messed up at the opening of the cd/dvd drive.
  Instead of just pulling out, I started its opening screw but quickly realized that this is not the right way. So I took it out. Rest of the disassembly procedure went well and I assembled it back but he little silver r 2 bands and a small source, which I'm sure that belongs to the CD player and I couldn't adapt it.
  And I don't know how it fits.
  The computer does not detect the drive. Although I can open it by clicking on the Open button, then he hang out by sharp object. (The light will blink showing the power exists in)

  The second thing is the microphone. I've never used until last week, but my voice is going through. The system does not detect any microphone.

  Help appreciated

  Hello

  On this path, it is not easy to say what is the problem with CD/DVD player. Are there signs of the CD/DVD drive in Device Manager or the drive is not displayed in Windows Explorer?

  How did you test mic? Try it with the tape recorder for windows. So you can test the functionality of the mic on the easiest way.

• Lost the disk for Installation of Windows Vista - can I use my friends with my product key?

  I am running Windows Vista on my computer at home, but I had this for a few years, and he began to have very slow, so I decided to completely erase the hard drive, now I know how to do this, but I need to re - install the OS when I'm done, but I've lost my Windows Vista installation CD , even though I still have my code/product key - it would be OK to use my drive of Windows Vista to friends with my product code?

  I tried this article: http://support.microsoft.com/default.aspx/kb/326246and he do not seem to answer my question - I'm trying to replace my copy, I just want to know if it is OK to use my friends?

  Yes.

  As long as it's a DVD from Microsoft and not a computer Manufacturer'e Recovery DVD.

  Read the information below.

  Vista recovery media obtain and/or use the Partition Recovery Vista on your computer to the factory settings .

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Also ask them if it is possible to do the recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

  They will tell you how to do this.

  Every computer manufacturer has their own way of making recovery disk/s.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Save all data, because it will be lost during a clean installation.

  See you soon.

  Mick Murphy - Microsoft partner

• How to fix - error 80073712 - windows component store is corrupt - after correctly installing the system update tool for windows vista.

  I get the error code 80073712 - windows component store is damaged - when you try to install windows vista SP1 and also the Cumulative security update to explore 7 (KB978207). Fails every time.

  I followed the advice and installed the system update tool for Windows Vista (does this twice), but still cannot download and install updates - get error 80073712.

  How can I fix the corrupted windows components store?

  Thank you

  Dan

  CMDC,
  If the SFC was not able to repair files then the best thing to do is to reinstall Windows.  You can try running a disk error check, if it fixes all of the problems, and then rerun the SFC and then install and run the System Update tool.  If there is still a problem with the SFC nto be able to complete then you should do a reinstall.

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.