Similar Questions

• Unable to access the photo viewer; and also cannot access the desktop icons because they are changed to the photo viewer icon.

  Original title: I tried to apply the photo viewer to open a file and the photo viewer icon replaced each icon on my desktop. Now I can't open anything on my desktop. What is going on?

  The name is below the icon, but the correct icon has been replaced by windows Photo Viewer icon. When I click to open it, it says: windows Photo Viewer cannot open this photo because Photo Viewer does not support this file format, or you do not have the latest updates... I don't know what I did!

  Hi,

   

  Thanks for posting your question in the Microsoft Community.

  From your problem description, I understand that you are unable to access the photo viewer; and also cannot access the desktop icons because they are changed to the photo viewer icon. Please let me know if you do not experience this problem.

  I understand the inconvenience caused to you. I'll help you solve the problem!

   

  Before troubleshooting, I have little information on the issue.

  1. did you of recent changes to the computer before this problem?

  Try the methods suggested in the article below and check after each method:

  Method 1: Icons change incorrectly in Windows: http://support.microsoft.com/kb/2396571

  Registry warning: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the in the Microsoft Knowledge Base: 322756. How to back up and restore the registry in Windows: http://windows.microsoft.com/en-us/windows-vista/Back-up-the-registry

   

  Method 2: Run scan files system (CFS) auditor, to repair missing or corrupted system files.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7: http://support.microsoft.com/kb/929833

  If the problem persists, post your reply with the results and the questions asked above. We are happy to help you further in the advanced troubleshooting steps!

  It will be useful.

• Cannot access my laptop from my desktop PC on the network

  I have a desktop running Windows 7 and a laptop running Vista, and they are both on a wireless network. My laptop can access my desktop, but my office is unable to access my laptop. On the desktop, my laptop is visible, but clicking on it causes the following network error "Windows cannot access \\DR-NOTEBOOK.

  Run the Diagnostics on the dialog box results in the following message: 'file and print sharing resources (DR-NOTEBOOK) is online but does not respond to connection attempts. I have gone through several web sites and support sites, but can't seem to find an answer ot fix the problem. I do not use any third-party firewall, only (on both PC) Windows Firewall.

  In network and sharing on the laptop Center, I have all the elements (i.e. the network discovery, file sharing,...), put into service.

  I would appreciate help from anyone. Thnak.s

  I finally managed to fix the problem. The link above was helpful, but I had already taken care of everything mentioned. The link isn't really remedy the situation where you have a laptop that is connected wirelessly to the network, as is my case. My problem is that the desktop PC could not access files/folders on my laptop, but it worked very well the opposite effect (i.e. the laptop could access files/folders on the desktop. After 'playing well' on the laptop, that's what I did to solve my problem:

  In Center of network & share on the laptop, there is a list with my network connection wireless, with a link "view state".

  Click on this link and you get a dialog box with a button 'properties '. By clicking on this, you get one of several elements that may or may not be selected. In my case, the "file and printer sharing for Microsoft networks" was NOT selected. I chose this and hey presto, it worked.

  Hope that this is useful for someone else with the same problem.

• Cannot access the desktop icons

  original title: I got a virus on my computer and I got rid of the virus, but now I can't open all my desktop icons I had a virus on my computer and I got rid of the virus but now I can't open my icons on the desktop and when I do it asks me wut program I want to open it with and I can't download anything 2 my dose 2 computer and I can unlock the internet icon well but dats it now how can I fix it

  http://www.Winhelponline.com/articles/165/1/restore-the-exe-file-association-in-Windows-Vista-after-incorrectly-associating-it-with-another-application.html
   
  To start the programs until remedy you try right clicking and choose Run as
  Administrator.
   
   
  --
  ..
  --
  "DRAGIN19125" wrote in message news: ee1b8a04-8c0b-4201-bcd2-9babcc65e9b2...
  > I had a virus on my computer and I got rid of the virus, but now I can not open
  > any of my desktop icons and when I do wonder wut program I want
  > Open with and I can't download anything 2 my computer dose 2 it and I can't
  > open the internet icon well but dats it now how can I fix it
   
   

• Error - location: C:\Program Files\Common Program Files Central\Main\msvcr71.dll is not a valid windows image cannot access the desktop icon to burn a DVD.

  Original title: I can't access my desktop icon to burn a dvd.

  I can't access my desktop icon to burn a dvd.  The message I get is as follows, "location: C:\Program Files\Common Program Files Central\Main\msvcr71.dll is not a valid windows image."  Please check this against your installation diskette. "On my toolbar, it said,"mediahub.exe - bad image"can someone please help me as I've used in the past to burn CDs and DVDs.  He moved with the computer.  Thank you

  Hello

  1. have you done any hardware changes or software on your computer before this problem?

  2 do you have a copy of Sonic application backup to reinstall it later?

  I suggest you to uninstall Sonic since Add / Remove Programs. Subsequently, check if you are able to burn CDs in your computer.

  
  Reference: burn your own custom CDs

  Hope the helps of information.

• cannot access the desktop icons, they are underlined

  top of page desktop icons are underlined and when you click on them, they do nothing

  Hi Carrie2010,

  1. Since when are you facing this problem?

  This occurs when you choose to single click to open an item. Let us try the following steps.

  1. Click on the start > Panel
  2. Click on options files
  3. In the General tab select the option double-click to open an item.
  4. Click apply and OK.

  Check the icons and let us know if this step has helped.

  Bindu S - Microsoft Support
  Visit our Microsoft answers feedback Forum and let us know what you think

• I have 2 laptops and one desktop. Desktop & laptop are very good. 2nd laptop computer cannot access the internet. I get a message media disconnected. I tried everything please help. I use Windows XP

  I have 2 laptops and one desktop.  Desktop & laptop are very good. 2nd laptop computer cannot access the internet. I get a message media disconnected. I tried everything please help.  I use Windows XP

  Hi JessaRoy,

  · The computer connected to the network or are they computer autonomous?

  · What is the number and the model of the computer?

  · What is the service pack installed don the computer?

  · What is the full error message with the error code, that's all?

  · What are the steps you tried to solve the problem?

  Try the steps from the link below: to test TCP/IP connections by using the ping and the commands net view: http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/sag_tcpip_pro_pingconnect.mspx?mfr=true

  With regard to:

  Samhrutha G S - Microsoft technical support.

• Cannot access internet without going through "Online Help & Support." ("Windows cannot access the specified path. You cannot ot have permission.)

  Problems: Access to the internet.    2. right of PC, for example, clock, Favorites, etc. does not appear on the screen while booting.

  3. cannot access the Micro password

  Error message: «Windows cannot access the path specified...» »

  When I'm online through the icon help & Support, still cannot access all the other icons; needs access to sites through links.

  First of all, there is problem when I played the game on 'brightness (MySpace link); PC seems to crash and the problem has continued since then.

  I have no idea what to do and I'm a bit of a novice.  In addition, have physical difficulties which slows me down or interferes with the ability to work through problems.

  Applications and links of Facebook can be very dangerous. Please start with the basics to ensure that you are working from a clean base. You will need to obtain the tools of a different, known-clean computer with access to the Internet and put them on a USB stick to transfer to the affected machine.

  http://www.elephantboycomputers.com/page2.html#Removing_Malware

  If you can't do the work yourself (and there is no shame in admitting this isn't your cup of tea), take the machine to a professional computer repair shop (not your local equivalent of BigComputerStore/GeekSquad). If possible, have all your data backed up before taking the machine into a shop.

  MS - MVP - Elephant Boy computers - don't panic!

• internal hosts cannot access the internet w / L2L configured tunnel

  The internal hosts behind the ASA cannot access the internet with a configured tunnel to L2L. The L2L tunnel is mounted and passing traffic correctly. However, the internal host cannot access the internet through the ASA. I think I have my NAT watered somewhere. I can't even a host statically mapped to the internet. It might be because I'm used to having a WAN IP to the external interface which differs by the CIDR block assigned by the ISP. In this case, it's all together, with the ASA outside interface occupying the first available address.

  We have been assigned a CIDR range x.x.x.64/28. x.x.x.65 is my front door and my first usable est.68, by the PSI (I guess what they utilisent.66 et.67 for internal use). External interface of the ASA est.68 and I'm trying to get NAT others. I'm Polo all DHCP clients internal and have some static entries as well. Below is the relevant NAT config. Yet once, all traffic passes above the tunnel properly, but not from inside to outside. If more information is needed, please advise.

  interface outside

  IP address x.x.x.68 255.255.255.240

  NAT-control

  Global x.x.x.69 - x.x.x.77 2 (outdoor)

  Global 1 x.x.x.78 (outside)

  NAT (inside) 0 access-list sheep

  NAT (inside) 1 10.10.10.0 255.255.255.0

  public static x.x.x.69 (inside, outside) STATIC_NAT_EXAMPLE netmask 255.255.255.255

  internal access-group interface inside

  Route outside 0.0.0.0 0.0.0.0 x.x.x.65 1

  internal to the 10.10.10.0 ip access list allow 255.255.255.0 any

  ! Remote LAN is 192.168.10.0/24

  access-list sheep extended ip 10.10.10.0 allow 255.255.255.0 192.168.10.0 255.255.255.0

  Can you post a "show sysopt run?

  Try this command to enable proxy arp.

  No outside sysopt noproxyarp

• Offline Installer CC Adobe (photoshop, lightroom, bridge)? One of my mac cannot access the internet.

  Hi, I need Installer back CC Adobe (photoshop, lightroom, bridge).  One of my mac cannot access the internet.

  Is there a link for an installer for them offline?

  I found that this is a link to the forum discussions " http://trials3.adobe.com/AdobeProducts/PHSP/16/osx10/Photoshop_16_LS20.dmg?PID=2159997 " ' but it does'nt works for me. "

  It is said

  Access denied

  You do not have permission to access to " " http://trials3.Adobe.com/AdobeProducts/PHSP/16/OSX10/Photoshop_16_LS20.dmg ? "on this server.

  Reference #18.cd72afc3.1450863956.3ab05b71

  N ° 1)

  Click on the link below and 6 CS download page opens, DO NOT download anything from there, just keep it open

  https://helpx.Adobe.com/x-productkb/policy-pricing/CS6-product-downloads.html

  If we do not keep CS 6 page open, you will get the access denied error.

  Step 2)

  Click on the link below:

  http://trials3.Adobe.com/AdobeProducts/PHSP/16/OSX10/Photoshop_16_LS20.dmg

• cannot access the internet after upgrading to firefox 30.0 on windows 7

  After the upgrade to firefox 30.0 on windows 7, cannot access the internet. FF 30.0 works OK under Vista

  Sometimes it's because of your security software thinking that the upgrade may not be legitimate. You can consult this article: problems connecting to websites after Firefox update.

• HP 15 laptop: laptop computer is connected to the wi - fi connection, but cannot access the internet

  Hello

  My problem is my WiFi says its connected but I can't browse or access the internet.it just tells me "unable to connect to internet computer is not connected to the internet", but my wifi says 'connected'.i tried to go to the cmd prompt and typed in "netsh int ip reset resetlog.txt c:\" goal it shows me "reset failed.access is denied .he don't s no user specified settings to be reset to zero." please "» What can I do?

  Thanks in advance.

  Hello @jerome256,

  Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums, I would like to draw your attention to the HP Forums Guide first time here? Learn how to publish and more.

  I understand that you are having a problem with your WiFi and wanted to help you!

  You are trying to access WiFi through router?  If you are connected to your wireless network, but cannot access the internet, then the problem may be with the router.  Check that the router is connected to the internet.  If you have more than one router, then you can ensure that you are connected to the correct router.  You can also try unplugging the router for about 30 seconds, and then reconnecting it.  Please consult the following document, as it can help solve the problem for you:

  HP PC - Troubleshooting wireless network and Internet (Windows 10)

  Please let me know if this information has been helpful by clicking the thumbs up below.

  Have a great day!

• Broadband went down for several days but was back on property that still cannot access the internet

  Went away for two weeks and return to find internet and landline phone at the bottom, contacted bt which were going out but it all came back to the top, light on bnroadband but still cannot access the internet!  Any answers please...

  Contact your ISP to solve problems.

• Cannot access the internet on a network Windows XP when Windows 7 goes to sleep

  Original title: Windows 7 Windows XP network problem.

  I replaced a Windows XP computer on my node 4 (2 PC, printer 2) cable network with a Windows 7 computer.  When the Windows 7 computer in mode 'sleep' the other (XP) computer cannot access the internet.  A message appears that there are 2 computers with the same IP address.  If I wake the computer 7 fine.  That is what it is?  I agree not all files between the computers.

  Hello

  It is usually the case when, for example, a router is off, but one or more of the devices connected to the router are left on.

  The devices to retain the ip address assigned to them, but when the router starts up again it has no knowledge of this. If when you start one of the other devices, the router can assign an ip address already in use. Concrete example that I reproduced with my router and the PC...

  • Start the router, then boot PC1 and PC2 - the router (192.168.1.1) will allocate for PC1 192.168.1.2 and 192.168.1.3 to PC2
  • Turn off the router, then turn off PC2, restart and shut off again
  • Put the PC1 to sleep
  • Start the router and PC2, the router does not PC1 and allocate 192.168.1.2 to PC2
  • PC1 to wake up and there still 192.168.1.2 who now is a confrontation with PC2

  Other ways to reproduce this situation may also be possible.

  All devices on your network must have a unique ip address, where the warning message.

  If you get this situation once again, the solution is to turn off all devices, including the router, then restart the router, then restart all devices connected to the router.

  To avoid this, you may be able to put ip Reservations for your router address which will ensure that all devices connected to the router always get the same ip address (unique). If you are unsure how to proceed, we will need your router brand and model to help.

  Tricky

• Vista Home Premium gives the message "linked to limited accessibility" and I cannot access the internet.

  I have Vista Home Premium and trying to connect to a WiFi spot, I get the message "linked to limited accessibility" and I cannot access the internet. I understand this is common for Vista and there is a fix for this problem, but want to make sure that I get the right one and can't seem to find anything referring to this issue on the Microsoft site

  Hello

  This problem happens only when connecting to a particular place for the WiFi?

  You can follow the suggestions and check out them.

  Method 1

  You can read the article.

  Message when a device on a Windows Vista-based computer uses a network bridge to access the network: "connected with limited access".

  http://support.Microsoft.com/kb/930517

  Method 2

  Disable IPv6.

  Try to uninstall IPv6 on all interfaces, the removal of virtual cards of IPv6 and reset the TCP/IP stack. To remove the IPv6, go to the properties for each network adapter, and deselect the check box next to the Protocol "Internet Protocol version 6 (TCP/IPv6), which will turn off, or select it and click on uninstall, which withdraw power off the computer.» Then go into Device Manager and remove any 4to6 adapters, adapters miniport WUN or tunnel adapters.

  NOTE: You should do this for each network connection.

  Method 3

  Temporary disable your security software.

  Disable the antivirus software

  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  Enable or disable Windows Firewall

  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Firewall-on-or-off

  Note: Software antivirus and firewall can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attack.

  Method 4

  You can reset the TCP/IP stack.

  How to reset the Protocol Internet (TCP/IP)

  http://support.Microsoft.com/kb/299357