Cannot access the Internet through WET610N to E4200

Similar Questions

• VLAN internal cannot access the Internet through PIX501

  Hello

  Im having problems with my current setup. We have Cat3750 switch which acts as a base for intervlan routing. At the same time, we have PIX501 as a firewall.

  the firewall is configured to statically map our Web server to the external network. The Web server is accessible from outside.

  My problem is the following. Internal users cannot connect to the internet. Each user has been defined with gateway for their assignment of VLANS corresponding. VLAN internal works fine but can not access the internet.

  Also, all users within our network cannot ping inner (192.168.1.7) address of the Web server. the Web server is directly connected to the switchport aboard PIX.

  Our facility is the following: modem DSL - PIX 501 - Cat3750 (InterVLan routing) - access switches.

  Pleasee see connected PIx and Cat3750 running config or reference.

  all inpiuts will be highly appreciated.

  Kind regards

  udimpas

  Add a default route on your 3750 score inside the PIX interface.

  IP route 0.0.0.0 0.0.0.0 192.168.1.5

• Satellite A300D - 13 X - cannot access the internet through wireless

  Hi all, I wonder if anyone can help me, try and tell you my problem as clear as possible.

  I am more able to access wireless internet. Tried to conect via the ethernet cable and that does not work either but broadband still work as my PS3 is still accelerating signal and can still connect via WiFi with my phone.

  Everything was working fine one night and the next day nothing!

  Any help greatly appreciated

  Thank you

  Mark

  > There is a yellow exclamation point in Device Manager
  > Cheked that all the drivers and they work properly

  I put t know why you are 100% sure that the drivers work correctly if the yellow exclamation point appears in the Device Manager.
  Once again; wireless network adapter appears on Device Manager-> network without any exclamation yellow cards?

  If this isn't the case, then you need to reinstall the WLan driver again!
  The laptop seems to use the WLan-RTL8187B REALTEK card 802.11(B/G) and you need Realtek WLan driver:

  http://APS2.toshiba-tro.de/WLAN/?page=downloads

• Cannot access the internet through the addresses in the emails from outlook express

  Any URL sent in the e-mail via Outlook Express will not access the website.

  As nothing happens when you click on the link?
   
   
  Hyperlinks do not work in Outlook Express or in Word (revised 29-Apr-09)
  http://support.Microsoft.com/kb/823301
   
  Hyperlinks do not work in Outlook Express after you put upgraded to IE7 [or IE8] (revised 29-Apr-09)
  http://support.Microsoft.com/kb/929867
   
  If still no joy:
   
  With the permission of MVP Frank Saunders. [RIP]
   
  If nothing happens when you click on a link:
  Open Windows Explorer or on the control panel.
  Go to tools | Folder options | Types of files.
  Scroll to [NONE] URL: HyperText Transfer Protocol (NOT the shortcut URL: Internet) and select it.
  Click Edit or advanced, depending on your version of Windows.
  Choose 'open '.
  Click on change.
   
  "Application used to perform action" should read:
   
  "C:\PROGRAM may EXPLORER\iexplore.exe" - nohome (check the path to)
  Iexplore.exe to ensure that it is correct and use the double quotes).
   
  DDE should be checked and in the boxes below, you should have:
   
  #1:
  « %1 »,,-1,0,,,
  #2
  IExplore
  #3 (white)
   
  #4
  WWW_OpenURL
   
  Protocol URL: HyperText Transfer with Privacy should be the same.
   
  If the foregoing is correct, uncheck the box: use DDE.
   

• Cannot access the internet through a wifi router

  Hi, I recently bought a method 3 G USB wifi router. I connected physically on my desktop and internet wifi works very well. However I have problems to get access to the internet using my laptop Vista. The laptop is a connection for the wireless network connection, but that's what I get. Any ideas what is the problem?

  On my system, I connect them BOTH to the wireless network connection AND Internet (there are separate connections for each installation) on my laptop wireless.  If I don't connect to the Internet, I'm just locally connected to the wireless network.  If I am not connect to the wireless connection, I can't connect to the Internet.  I know not how your needs to be installed, but that is probably the problem.  You may add an internet connection for your laptop, and then connect both to achieve a good connection.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• cannot access the internet through firefox, IE is ok, checked the firewall settings and network

  Have used firefox for ages w / no problem - this morning, firefox will not have internet access - modem and the router are fine, inernet explore what access very well. Firefox is configured to use the system, not considered proxy settings 'no proxy', has not worked, checked windows and Mcaffey firewalls, not found something that should be blocked. Have restarted/rebooted everything

  This has happened

  Each time Firefox opened

  This moringing - last successfully used there - 3: 00 children asks that they "did nothing...". »

  User Agent

  Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0; .NET CLR 1.1.4322; .NET CLR 2.0.50727; .NET CLR 3.0.4506.2152 .NET CLR 3.5.30729)

  They did something with firefox 3.6.8, which upsets the McAffee Firewall currently. Since the upgrade, I get the firewall Alerts pop ups. If you click on the block (which could have your children), then Firefox will be blocked completely.

  If you dig in the McAffee Firewall tools-> program authorities, you will likely find that Firefox listed as "blocked."

  On my machine, the entry is for 'Free' only and I now get alerts. I think they will disappear if I switch it to "Full". But I'm reluctant to do this, why a browser should accept incoming connections, why this change has been made and what benefit is it for us as users?

• internal hosts cannot access the internet w / L2L configured tunnel

  The internal hosts behind the ASA cannot access the internet with a configured tunnel to L2L. The L2L tunnel is mounted and passing traffic correctly. However, the internal host cannot access the internet through the ASA. I think I have my NAT watered somewhere. I can't even a host statically mapped to the internet. It might be because I'm used to having a WAN IP to the external interface which differs by the CIDR block assigned by the ISP. In this case, it's all together, with the ASA outside interface occupying the first available address.

  We have been assigned a CIDR range x.x.x.64/28. x.x.x.65 is my front door and my first usable est.68, by the PSI (I guess what they utilisent.66 et.67 for internal use). External interface of the ASA est.68 and I'm trying to get NAT others. I'm Polo all DHCP clients internal and have some static entries as well. Below is the relevant NAT config. Yet once, all traffic passes above the tunnel properly, but not from inside to outside. If more information is needed, please advise.

  interface outside

  IP address x.x.x.68 255.255.255.240

  NAT-control

  Global x.x.x.69 - x.x.x.77 2 (outdoor)

  Global 1 x.x.x.78 (outside)

  NAT (inside) 0 access-list sheep

  NAT (inside) 1 10.10.10.0 255.255.255.0

  public static x.x.x.69 (inside, outside) STATIC_NAT_EXAMPLE netmask 255.255.255.255

  internal access-group interface inside

  Route outside 0.0.0.0 0.0.0.0 x.x.x.65 1

  internal to the 10.10.10.0 ip access list allow 255.255.255.0 any

  ! Remote LAN is 192.168.10.0/24

  access-list sheep extended ip 10.10.10.0 allow 255.255.255.0 192.168.10.0 255.255.255.0

  Can you post a "show sysopt run?

  Try this command to enable proxy arp.

  No outside sysopt noproxyarp

• HP 15 laptop: laptop computer is connected to the wi - fi connection, but cannot access the internet

  Hello

  My problem is my WiFi says its connected but I can't browse or access the internet.it just tells me "unable to connect to internet computer is not connected to the internet", but my wifi says 'connected'.i tried to go to the cmd prompt and typed in "netsh int ip reset resetlog.txt c:\" goal it shows me "reset failed.access is denied .he don't s no user specified settings to be reset to zero." please "» What can I do?

  Thanks in advance.

  Hello @jerome256,

  Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums, I would like to draw your attention to the HP Forums Guide first time here? Learn how to publish and more.

  I understand that you are having a problem with your WiFi and wanted to help you!

  You are trying to access WiFi through router?  If you are connected to your wireless network, but cannot access the internet, then the problem may be with the router.  Check that the router is connected to the internet.  If you have more than one router, then you can ensure that you are connected to the correct router.  You can also try unplugging the router for about 30 seconds, and then reconnecting it.  Please consult the following document, as it can help solve the problem for you:

  HP PC - Troubleshooting wireless network and Internet (Windows 10)

  Please let me know if this information has been helpful by clicking the thumbs up below.

  Have a great day!

• cannot access the internet from the desktop

  I am able to access the internet through the application of start page, but cannot access the internet from the desktop page. The convenience store has not detected a problem. Does not work via Wifi or wired broadband direct.

  Hello

  Are you using the right Internet Explorer?

  There are two more separate... From the start screen and another completely different for the office.

• cannot access the internet after upgrading to firefox 30.0 on windows 7

  After the upgrade to firefox 30.0 on windows 7, cannot access the internet. FF 30.0 works OK under Vista

  Sometimes it's because of your security software thinking that the upgrade may not be legitimate. You can consult this article: problems connecting to websites after Firefox update.

• The user account cannot access the internet once parental used contract, even after you turn off the parental control

  I created a user account for my child. I am able to access the internet through firefox. Then I set the parental controls and can NOT access the internet more. I turn off parental controls for this user account. I still can't access the internet from this account.

  Parental control is a part of the operating system Windows and not Firefox. You can get help here: http://support.microsoft.com/ask-community/windows/

• Can I make my Vonage phone service and always access the internet through MSN Premium

  Can I make my Vonage phone service and always access the internet through MSN Premium

  Hello

  The question you posted would be better suited to the MSN support. I suggest you to contact MSN support for assistance.

  How to contact MSN customer service
  http://support.Microsoft.com/kb/940784
  https://support.MSN.com/contactus.aspx?scrx=1
  http://answers.MSN.com/forums.aspx?ProductID=29

• Broadband went down for several days but was back on property that still cannot access the internet

  Went away for two weeks and return to find internet and landline phone at the bottom, contacted bt which were going out but it all came back to the top, light on bnroadband but still cannot access the internet!  Any answers please...

  Contact your ISP to solve problems.

• Cannot access the internet on a network Windows XP when Windows 7 goes to sleep

  Original title: Windows 7 Windows XP network problem.

  I replaced a Windows XP computer on my node 4 (2 PC, printer 2) cable network with a Windows 7 computer.  When the Windows 7 computer in mode 'sleep' the other (XP) computer cannot access the internet.  A message appears that there are 2 computers with the same IP address.  If I wake the computer 7 fine.  That is what it is?  I agree not all files between the computers.

  Hello

  It is usually the case when, for example, a router is off, but one or more of the devices connected to the router are left on.

  The devices to retain the ip address assigned to them, but when the router starts up again it has no knowledge of this. If when you start one of the other devices, the router can assign an ip address already in use. Concrete example that I reproduced with my router and the PC...

  • Start the router, then boot PC1 and PC2 - the router (192.168.1.1) will allocate for PC1 192.168.1.2 and 192.168.1.3 to PC2
  • Turn off the router, then turn off PC2, restart and shut off again
  • Put the PC1 to sleep
  • Start the router and PC2, the router does not PC1 and allocate 192.168.1.2 to PC2
  • PC1 to wake up and there still 192.168.1.2 who now is a confrontation with PC2

  Other ways to reproduce this situation may also be possible.

  All devices on your network must have a unique ip address, where the warning message.

  If you get this situation once again, the solution is to turn off all devices, including the router, then restart the router, then restart all devices connected to the router.

  To avoid this, you may be able to put ip Reservations for your router address which will ensure that all devices connected to the router always get the same ip address (unique). If you are unsure how to proceed, we will need your router brand and model to help.

  Tricky

• I have 2 laptops and one desktop. Desktop & laptop are very good. 2nd laptop computer cannot access the internet. I get a message media disconnected. I tried everything please help. I use Windows XP

  I have 2 laptops and one desktop.  Desktop & laptop are very good. 2nd laptop computer cannot access the internet. I get a message media disconnected. I tried everything please help.  I use Windows XP

  Hi JessaRoy,

  · The computer connected to the network or are they computer autonomous?

  · What is the number and the model of the computer?

  · What is the service pack installed don the computer?

  · What is the full error message with the error code, that's all?

  · What are the steps you tried to solve the problem?

  Try the steps from the link below: to test TCP/IP connections by using the ping and the commands net view: http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/sag_tcpip_pro_pingconnect.mspx?mfr=true

  With regard to:

  Samhrutha G S - Microsoft technical support.