Cannot access the network after you have installed the Windows updates

Similar Questions

• HP 8600 printer range is found on the network after you have installed the Dymo printer for processing of credit cards

  HP 8600 printer range is found on the network after you have installed the Dymo 450 Turbo printer for processing of credit cards

  Hello Christina,

  1. What is the IP (Internet Protocol) address, the subnet and default gateway of the printer?

  2 have you tried to Ping to the IP address of the printer?

  Reset the printer can help get the problem solved.

  Perform the steps mentioned below to get the address of IP(Internet Protocol), subnet address, and default gateway.

  a: Type CMD in the search box start and press ENTER.

  b: now, type Ipconfig/all and press ENTER.

  Proceed as for Ping to the IP address of the printer.

  a: Type CMD in the search box start and press ENTER.

  b: type PING (IP address of the printer) , and then press ENTER.

  Reset the printing system:
  a: Go to System Preferences > Print & Fax
  b: Right (or control), click inside the box that lists your printers and select Reset Printing System.

  WARNING- This will remove ALL your printers!
  c: Select the sign more to add a printer. Search for the printer, select it, and wait until the button 'Add' becomes available. Until it clicks.

  Click on the link mentioned below as reference.

  http://Windows.Microsoft.com/en-in/Windows7/install-a-printer-on-a-home-network

  Note: "Check the title that reads" set up a network printer "

  Answer please if you have any questions.

• Cannot access the Windows Update Site

  Search engine links redirect us to different sites, not associated.  I get an error message - the connection was reset - when I try to access MS Windows security updates.  I do not know how to find the problem, when I can't access resources Ms.

  You can try:

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  If not post back with more information, like what Windows operating system you use including Service Pack level, what security software you use and error messages that are related to the update that is causing problems.

  Thank you.

  TaurArian [MVP] 2005-2011 - Update Services

• problem with access to the image data after you have installed latest windows

  Hi, my name s mayur, I got the problem when I open my photos data, actuly I have a computer laptop sony vaio there and I m a photographer so usually I saved my data in my vista drive was slove, so I upgraded mwan Formate c drive and install windows 7 in there then when I cheack my image data in f drive I cant able to see the thuumbs when I open it in the windows image viewer He told me i dnt have the permission to access

  I did this solutions

  I changed my user to administrator - has not worked
  I changed the security settings and gives full control to user - does not work
  I've changed owner ship - does not work, I reinstalled vista - not worked
  I used hodden administrator - has not worked
  I have attached the HDD in the pc of windows genuen - has not worked
  I opened my hard drive under linux and not worked

  I am a hardware engineer also so can someone tell me what will be the reson when I cheak the propertese folder there are a few user (s16561613) with red qustion mark in the authenticated user, my laptop has a genuien windows and now I have installed the windows is not genuine and I dnt have the original windows. so is this problem related to the license... or is the problem of pricing to someone please help me... the security and

  Hello

  There will not be any support for a pirated copy of Windows. I suggest you install a genuine Windows 7 on the computer and test the issue. If you face the same problem let us know so that we can help you further.

  Reference:

  Windows Genuine

  http://Windows.Microsoft.com/en-us/Windows/genuine

• Cannot access my network after I have reset my router

  HI, I recently tried to reset my default router and I followed the procedure to reset after doing so, my network says it is safe and I need to enter a password to access what I don't know. unless I conect to the router I can't access the web portal to change the seetings of my router, I have no idea what to do someone help me on this issue.

  Kind regards.

  Use the default settings... they are on the label of the router

• Cannot access the Windows Update site and install updates

  Original title: 2 problems 1 when he goes to win the update, I get, can not display the page. 2 if I'm going in a different direction and I get search updates, scanning (encountered a problem can not display the page) comes up and on the opportunity of the page crashes.

  I did fix it, I disabled all firewall internet security and and also listed win update to a trusted site.

  Hi trski,

  I recommend you to check for possible malware program.

  1 restart the computer using safe mode with networking. If you have a Type of Internet connection wireless, have a wired internet connection. To restart in Mode safe mode with networking:
  a. press the restart.
  (b) at the moment you press the restart button, keep tapping F8 until that Advanced Boot Options appears.
  c. Select Mode safe mode with networking
  2. open the Web browser to explore and go to http://safety.live.com.
  3 scan the OneCare Safety Scanner full Service.
  4. take note of the items that are detected, but cannot be deleted, as appropriate. Get back to me with the names of the infections that cannot be removed, if necessary.
  5. after removing the infection (if any), start in Normal Mode by restarting just the normal computer like you do it.

  Run Windows Update again, and get back to us with your findings.

  If this post can help solve your problem, please click "Propose as answer" If you find it useful, mark it as useful by clicking the 'Vote as useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Cannot access planning applications after you have added the calculation Manager

  Hi guys,.
  
  I have recently added/installed the Manager calculation on an environment running (EPMA, HPL, BSE) (11.1.2.1/win 2008r2 64 bit), which had prior to installation of the Calc Manager. EPMA and planning applications in classic and running.
  
  After that, I deployed the calc manager and configured the Web server on the server of the Foundation/epma only, I have 3 servers (Foundation, Manager of epma and calc), Essbase and planning.
  
  I have restrated the services and I can open the calculation Manager.
  
  When I try to open the existing applications of EPMA I get:
  
  [launch the journal]
  [< BEA-101020 > < [path of the module: HyperionPlanning ServletContext@6352948[app:PLANNING: / HyperionPlanning spec-version: 2.5 version: 11.1.2.0]] Servlet failed with Exception
  java.lang.ClassCastException: java.lang.NoClassDefFoundError
  at HspLogOn.Handle (unknown Source)
  at HspLogOn.doPost (unknown Source)
  at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
  at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
  to weblogic.servlet.internal.StubSecurityHelper$ ServletServiceAction.run (StubSecurityHelper.java:227)
  at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
  at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
  at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:27)
  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
  at HspValidationFilter.doFilter (unknown Source)
  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
  to oracle.security.jps.ee.http.JpsAbsFilter$ 1.run(JpsAbsFilter.java:111)
  at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:313)
  at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:413)
  at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:94)
  at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:161)
  at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
  at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:136)
  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
  to weblogic.servlet.internal.WebAppServletContext$ ServletInvocationAction.wrapRun (WebAppServletContext.java:3715)
  to weblogic.servlet.internal.WebAppServletContext$ ServletInvocationAction.run (WebAppServletContext.java:3681)
  at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
  at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
  at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2277)
  at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2183)
  at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1454)
  at weblogic.work.ExecuteThread.execute(ExecuteThread.java:207)
  at weblogic.work.ExecuteThread.run(ExecuteThread.java:176)
  >
  [End log]
  
  I tried to transfer the applications of EPMA exisitng but it has been abandoned with (HTTP/1.1 500 Internal Server Error)
  
  I checked the ohs_component newspaper and saying some file is missing:
  
  [launch the journal]
  File does not exist: D:/Oracle/Middleware/EPMSystem11R1/common/epmstatic/bpmui/resources/bpm_en-US.js, referer: http://[server]:19000/workspace/index.jsp
  File does not exist: D:/Oracle/Middleware/EPMSystem11R1/common/epmstatic/wspace/resources/wksp_en-US.js, referer: http://[server]:19000/workspace/index.jsp
  File does not exist: D:/Oracle/Middleware/EPMSystem11R1/common/epmstatic/raframework/resources/cds_global_en-US.js, referer: http://[server]:19000/workspace/index.jsp
  File does not exist: D:/Oracle/Middleware/EPMSystem11R1/common/epmstatic/raframework/resources/tools_global_en-US.js, referer: http://[server]:19000/workspace/index.jsp
  File does not exist: D:/Oracle/Middleware/EPMSystem11R1/common/epmstatic/reporting_analysis/resources/fr/fr_web_en-US.js, referer: http://[server]:19000/workspace/index.jsp
  File does not exist: D:/Oracle/Middleware/EPMSystem11R1/common/epmstatic/planning/resources/hp_global_en-US.js, referer: http://[server]:19000/workspace/index.jsp
  File does not exist: D:/Oracle/Middleware/EPMSystem11R1/common/epmstatic/awb/resources/awb/awb_global_en-US.js, referer: http://[server]:19000/workspace/index.jsp
  File does not exist: D:/Oracle/Middleware/EPMSystem11R1/common/epmstatic/aif/resources/aif-global_en-US.js, referer: http://[server]:19000/workspace/index.jsp
  File does not exist: D:/Oracle/Middleware/EPMSystem11R1/common/epmstatic/calcmgr/resources/calcmgr_global_en-US.js, referer: http://[server]:19000/workspace/index.jsp
  File does not exist: D:/Oracle/Middleware/EPMSystem11R1/common/epmstatic/raframework/resources/changeManagement_global_en-US.js, referer: http://[server]:19000/workspace/index.jsp
  File does not exist: D:/Oracle/Middleware/EPMSystem11R1/common/epmstatic/webanalysis/resources/resources_global_en-US.js, referer: http://[server]:19000/workspace/index.jsp
  Failure for the request: / HyperionPlanning/servlet/HspAppManagerServlet? action = validate_workforce_or_capex & license_type = all & lang_id = en, Resp Code: [500]
  Failure for the request: / HyperionPlanning/servlet/HspAppManagerServlet? action = validate_workforce_or_capex & license_type = all & lang_id = en, Resp Code: [500]
  ....
  File does not exist: D:/Oracle/Middleware/user_projects/epmsystem1/httpConfig/ohs/config/OHS/ohs_component/htdocs/favicon.ico
  Failure for the request: / HyperionPlanning/servlet/HspAppManagerServlet, Resp Code: [500]
  
  [End log]
  
  
  Appreciate any help! and thanks in advance,
  Omar
  
  EDIT:
  I found that all the. JS files that are missing are actually there only without "-U.S.»
  
  Published by: Omar on January 23, 2012 15:17

  Have you tried to redeploy planning again?

  In theory, you should be able to install/configure additional products at a later stage if because they are produced of foundation it may have caused problems.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• After you have installed the Realtek drivers, I get code 10 error and cannot start sound.

  original title: help with my sound please

  After you have installed the realtek driver it says code error 10 can't start sound...

  also I can't find the button sound.video and games on the Device Manager heres the message in Event Viewer:

  Log name: System

  Source: PlugPlayManager

  Date: 17/05/2012-18:50:27

  Event ID: 12

  Task category: no

  Level: error

  Keywords: Classic

  User: n/a

  : My computer

  Description:

  The device ' in Build Conexant Type 2 modem "(HDAUDIO\FUNC_02 & VEN_14F1 & DEV_2C06 & SUBSYS_10250126 & REV_1000\4 & 37d33e44 & 0 & 0102) disappeared from the system without first be prepared for removal.

  The event XML:

   

     

      12

      2

      0

      0 x 80000000000000

     

      435

      System

      badimo-PC

     

   

   

      Modem Conexant - in the generation Type 2

      HDAUDIO\FUNC_02 & VEN_14F1 & DEV_2C06 & SUBSYS_10250126 & REV_1000\4 & 37d33e44 & 0 & 0102

      00000000

   

  Hello I want to,

  The problem you describe looks like you are maybe install the wrong driver for your sound card.
  Have you checked that the driver is for your specific device?
  If you look in your system's Device Manager, is there a yellow exclamation next to the audio controller?
  http://Windows.Microsoft.com/en-us/Windows-Vista/open-Device-Manager
  If so, this seems to indicate that the drivers installed are not good for your sound card. Usually if you double-click the device in Device Manager, it will say something in the sense of "Device cannot start".
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

• After you have installed Windows 10 and signature with password (Windows 7), the following screen (I guess the desktop of Windows 10) just flashes and the arrow cursor just spins.

  After you have installed Windows 10 and signature with password (Windows 7), the following screen (I guess the desktop of Windows 10) just flashes and the arrow cursor just spins.  Try to understand the problem.  Can I try to reinstall? Problem is on flashing screen cannot do anything.

  Original title: Windows 10

  Hello

  Thanks for posting in the Microsoft Community.

  (1) do the Windows 10 installation process is complete?

  (2) you are able to view the Windows 10 desktop?

  You can check the help below article and check if it helps.

  http://Windows.Microsoft.com/en-us/Windows-10/troubleshoot-screen-flickering

  If the problem persists, you can reinstall Windows 10 by downloading an ISO image file to create installation media.

  To download an ISO image see the link below:

  https://www.Microsoft.com/en-us/software-download/Windows10

  To create an Installation media check out the link below.

  http://Windows.Microsoft.com/en-us/Windows-10/media-creation-tool-install

  It will be useful. Please get back to us with the State of the question.

  Thank you.

• network card and other missing drivers after you have installed windows 7 ultimate on my elitebook 8540w

  HP Elitebook 8540w, model WH137AW #ABA - this laptop and was previously running a trial version of windows 7 Professional 64-bit. I wanted to install windows 7 ultimate 64-bit. I chose to install instead of upgrade that I assumed that the demo version was not expandable. Before the installation, I was able to connect to a wireless network with success. After you have installed windows 7 ultimate successfully, I was more able to connect or see all the networks. The diagnosis error indicates that I can miss a network card, or if I don't have one, the driver may need to be reinstalled. I saw a previous post and answer that looked very similar, but the difference is that I am out of my network card driver, so I'm not able to download any other drivers. -help me please!

  Yes... you can do. If you get confused on what to install, please provide the hardware ID.

  HardwareID: (open start, type devmgmt.msc and press on enter.) Double-click on a device. Choose the Details tab, then the hardware in the menu ID drop-down).

• Problem has been detected and windows has been shutdown error STOP: 0x0000008E. Get the memory dump after you have installed the trial version of MS Project 2010.__space.

  Original title: problem has been detected and windows has been shut down. Get the memory dump after you have installed the trial version of MS Project 2010.__space.

  Computer Message: Check if you have enough disk space. If a driver is identified in the stop message, disable the driver or check with the manufacturer for driver updates. Try changing video cards.

  Check with your suppliers of material, updates the BIOS. Disable the BIOS memory options such as implementing caching or shading. If you need to use Safe Mode to remove or disable components, restart your computer, press F8 to start advance startup options, and then select Safe mode.

  Technical information: * STOP: 0x0000008E (0xC0000005, 0x8054556C, 0xADB78A98, 0x00000000)

  Beginning physical memory dump

  Total physical memory dump. Contact technical support for further assistance group.

  Hi fernandomventura,

  Step 1: Disconnect all external devices (printers, scanner, USB (universal serial bus) readers, etc...) Except the keyboard and mouse and then start.

  If this solves the problem, then add back devices at a time until you discover the piece of hardware causing the issue.  Then get any drivers\software update for the device.

  Step 2: Follow the steps mentioned in the articles below which deals with a similar question

   

  General troubleshooting for an error message that you receive randomly in Windows XP: "Stop 0x0000008E"-restore the system to achieve ".

  http://support.Microsoft.com/kb/945658/

  You receive a random "0x0000008E" error message on a blue screen in Windows XP

  http://support.Microsoft.com/kb/827663

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• After you have installed the ripple 0.9.4.1 I can't find a way laucnhing it

  After you have installed the ripple 0.9.4.1 I can't find a way laucnhing, there is no program menu icons, not on desctop... nowhere.

  What is the way of how correct installation?

  I installed it on the D drive instead of c... but it's okay

  PS. anyone can fix version on the main site, it says 0.9.1 but actual installed version is 0.9.4.1, it confuses everything team.

  Open chrome.

  In Explorer, navigate to:

  C:\Program Motion\Ripple 0.9.4.1\ search

  Drag ripple_ui.crx chrome.

  Basically, see here:

  https://bdsc.webapps.BlackBerry.com/HTML5/documentation/ww_getting_started/Use_the_Ripple_emulator_C...

• I bought Photoshop CC 2015 creative thinking Cloud before running the trial version of my computer. After you have installed the creative cloud, the box with the number of days remaining still apears. How can I proceed?

  I bought Photoshop CC 2015 creative thinking Cloud before running the trial version of my computer. After you have installed the creative cloud, the box with the number of days remaining still apears. How can I proceed?

  Check your account indicates the subscriptions that you expect (and that the adobe, used in the next step id is correct) by logging in here and checking the status of your subscription, https://www.adobe.com/account.html

  then, if it's current, disconnect and then back to your client application using the adobe with the link above in cc id: http://helpx.adobe.com/creative-cloud/kb/sign-in-out-creative-cloud-desktop-app.html

  If this fails, CC help | Applications creative Cloud back to update evaluation Mode to 2015 CC

• After you have installed Windows 10, I can no longer create a PDF of my program Pagemaker 7.0.1. Purchased Acrobat DC, but not joy. Apparently, Acrobat PDF maker does not recognize the .pmd extension. I get errors and various suggestions, but nothing work

  After you have installed Windows 10, I can no longer create a PDF of my program Pagemaker 7.0.1. Purchased Acrobat DC, but still no joy. Apparently, Acrobat PDF maker does not recognize the .pmd extension. I get errors and various suggestions, but nothing works. WHAT?

  Print to Adobe PDF? Why the * & ^ * & ^ V_ $ didn't pay a lot more money to Adobe for an Adobe program that does not work with another Adobe program? Oh, right--they want to move me up (buy) the new Adobe graphics programs. I'll keep sweating this point and will no doubt wind up forking over a thousand$ $$ or so for 'new' stuff I don't need.

• After you have installed the Windows upgrade free 10 can you easily return Windows 7?

  I have to reinstall my applications and hardware drivers? Otherwise it is a matter of circuit breaker.

  Can I uninstall Windows 10 if I do not like it?

  See the following: how: go back to an earlier version of Windows from Windows 10

  Backing up your computer:
  When you make significant changes to your computer for example updated operating system, you must always back up. See the links to resources on the backup by clicking the link for each version of Windows you are using: Windows XP, Windows Vista, Windows 7, Windows 8/8.1

  Also check:

  How to: build 10 tips before installing the latest version of Windows 10

  How to: 10 things to do if the Windows 10 install fails.

  Once you have installed these important updates and followed the required steps, you should be ready to receive your free Windows 10 update this summer.