Cannot access the network drive or impossible to mount the network drive. Error "network path was not found.

Similar Questions

• When you try to access an external drive shared by MAC from Windows, I get an error Code: 0 x 80070035 - the network path was not found

  Original title:

  I'm unable to access an external drive that I have connected to a mac on my home network.  I can access all the files on the mac itself, but when I try to connect to the external drive, windows 7 gives the error Code: 0 x 80070035 - the network path was not found.  The external drive is set to share on the Mac, but Windows 7 always gives me error.

  Hi Comicsancturn,

  Follow the troubleshooting steps in this thread to solve the error 0 x 80070035.

  Let us know if that helps.

• Windows 7 network drive mapping error: "error code: 0 x 80070035 the network path was not found."

  I recently started getting an error when you try to access my network drive. Attempt to fix I have also disconnected the drive and tried to reconnect. I get the error: error code: 0 x 80070035 the network path was not found

  I am able to map the drive of all the other machines in the hold of the House (Mac OS X, Windows XP, Windows Vista).  However, the Windows 7 machine continues to report the error.

  I searched the internet for the microsoft Web site and answers and so far nobody seems to have an answer to the problem (and it seems to be a very common problem in Windows 7, based on the number of reports I've met in my search). I'm able to reach the reader through the IP address, but cannot connect in it (continues to re - ask for credentials and I checked the credentials I use are 100% correct).

  The only significant event was the address IP changed on the remote disk. What that tells me, is that windows is not updated the name of the drive to the new IP address and confounds seriously on how to get the player passing the correct credentials.

  I removed the protection against viruses (a suggestion said it was the cause), but it has no effect. Check my sharing permissions and so many different places that I could, but nothing has changed and all seems OK.

  The problem is in Windows 7, but I don't know where all configurations "tricks" are on the (64 bit) OS - has been used for a 32-bit system. Where can I manually fix the DNS or DHCP parameter for the name of the drive?

  SOLUTION

  It's a problem with Windows Explorer in Windows 7 do not resolve the computer name target to its IP address. It is not a problem with the firewall or antivirus.

  There is a simple workaround solution.  Use the IP address of the target computer, not the computer name.

  (1) find IP address that the computer target is.  It is desirable to give a private static IP address to the target computer, for example, 192.168.1.10, so it does not change.  Use the local windows help when you sit in front of the target computer to do this, if you don't know how.

  (2) when you are sitting in front of the Windows 7 computer, you want to access the target computer, open Windows Explorer and in the address bar type------followed\\192.168.1.10 static address of the target computer, for example, and press enter

  If the target computer uses the name of user and password sharing, after a few seconds, you will be prompted credentials.  Enter the same username and password used to log on the target computer when you're sitting in front of it.

  The target computer will be added to the list of computer network Windows 7, appearing as an IP address instead of a computer name.  You can access his actions as if it was listed by name instead of the number.

  That's all.

• You might not have permission to use this network resource. Contact the administrator of this server to find out if you have access permissions. The network path was not found. »

  What does this message mean? I get when I click on the icon to evaluate files on another of our computers. "You might not have permission to use this network resource. Contact the administrator of this server to find out if you have access permissions. The network path was not found. »

  The other computer has not been configured to allow remote access to this folder from your account.  You'll want to go to this other computer, right click on the folder that is shared and go to properties, then set the appropriate security settings to allow access.

• Error code: 0 x 80070035 the network path was not found.

  Hi all

  I have 2 systems. In one system, I installed Windows XP Pro SP2 and in another machine I installed Windows Vista Home Basic Edition. The two systems are networked. I am able to access and view the shared folder in Vista the XP system. But when I am trying to access folders in XP since Vista I get the below error:
  Windows cannot access \\hyd02
  Check the spelling of the name. Otherwise, there could be a problem with your network. In an attempt to identify and solve network problems, click on diagnose.
  Error code: 0 x 80070035 the network path was not found.
  
  
  I did the settings below:
  (1) file and printer sharing are enabled in both systems.
  (2) firewall is disabled in the systems.
  (3) in the center of security and network, the network is private.
  and network discovery is enabled, file sharing is enabled, public folder sharing is turned on, printer sharing are enabled and protected by password sharing is
  Off, media sharing turned OFF.
  (4) the name of the task force in both the system is the same.
  Can someone help me solve this error...
  Thank you
  Sylvie G

  Hi Sylvie G

  Thanks for posting on Microsoft Answers.

  Are the same username and password on both systems?
  What is the share name you are trying to do on the XP machine?
  Let's say that the share name is music, you would get to it by typing \\hyd02\music

  Can you do a Test PING since the Vista PC on the XP PC?
  Go to a command prompt and type ping followed by the IP address of the computer XP

  Please post back the results... Thank you Ken
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Error code 0 x 80070035 that the network path was not found.

  OT: error code 0 x 80070035
  My wife and I have 3 computers all running Win 7 64 bit. Two jobs and the third is a laptop. My desktop or laptop computer I can access any folder of each machine. However, when I try to click on my wife under 'Network' computer I get the message "Windows cannot access\\wife_desktop." When I click 'See details' it displays "error code 0 x 80070035. The network path was not found. "I'm running out of things to try.  I tried to use my desktop computer and notebook to help me check the installation on my wife's computer. I have updated owner and security settings in both car and system, as well as temporarily disable the firewall. Any suggestions would be greatly appreciated.

  Hello

  Method 1: Run the network troubleshooter and check out what he has to say.

  See the links below:
  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7
  http://Windows.Microsoft.com/en-us/Windows7/open-networking-troubleshooters
  http://Windows.Microsoft.com/en-us/Windows7/use-Network-Troubleshooter-event-logs-to-solve-network-problems

  Make sure network discovery is enabled on the laptop computer, by default the State network discovery is disabled. If network discovery is off, please take the following steps to turn on.

  (a) click Start.
  (b) click on Control Panel.
  (c) click on network and sharing Center.
  (d) click on the arrow to drop down next to the network discovery.
  (e) click on the option, turn on network discovery.
  (f) click on apply.
  http://Windows.Microsoft.com/en-us/Windows7/enable-or-disable-network-discovery

  Method 2: The question can be caused also by your security program such an antivirus or a firewall of Windows /Defender that can have conflicting parameters as to not not to perform certain tasks. I suggest you temporary disable antivirus and firewall and check the result again. You must activate new security that you was disabled programs.

  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-Firewall-on-or-off 
  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  See the following link: http://social.technet.microsoft.com/Forums/nb-NO/w7itpronetworking/thread/028a3d13-f571-49e0-abe7-1ca61fb92082

• network error 0 x 80070035 that the network path was not found.

  I have problem of network with Win7 pro. When I click on my network folder links to my LAN I geterror 0 x 80070035 the network path was not found.

  The network has been set up for 4 months, it includes 3 PC, so far the only problems have been minor, such that the network links, which restart a system endangered has been necessary to update the network and worked.

  The 2 other PC can see and access each other and see and access PC Win7 Pro troubled, but troubled PC Win7 Pro can even happen to its own network without theerror records 0 x 80070035 the network path is not found, arise.

  After hours of checking, I have found no resolution, but as I restored it the PC several times, sometimes service reappearing for a while.
  In my search for possible causes, I opened the Device Manager with the selected hidden devices, under network adapters and found189 instances of card Microsoft 6to4.
  I don't have 3 PC's networked! Anyone know if it is a normal number for Win7 or I found part of an anomaly.

  Any suggestions?

  c.Maresca

  Thank you for your comments.

  In the search for a solution to my problem of network Win7 Pro, that I've been on all the settings you mentioned before that I posted my question and no problem, everything is as it is necessary to have a comprehensive network and the network was very good except the occasional missing links, which I described in my original post. The only addition to the configuration of PC from the network has been initially implemented has been automatic updates to update from Ms.

  The good news is that, as I studied it to the maximum, I found 2 messages in the network forum Win7 which combined provided the solution for my problem with the network.

  As I did research on it, I noticed that a lot of people have similar problems of network. I know that there are many reasons of connectivity issues, as well as the solutions are specific problems, but if other users of the network are affected by the problem of multiple card Microsoft 6to4 and local network error 0 x 80070035 that the network path is not found, the solution I found worked for me.

  If you want to see more respond to this stream.

  c.Maresca

• An error occored while reconnecting to Z: at \\BRENLEEBOLIN\Public. Microsoft Windows network: the network path was not found. This connection has not been restored,

  A can not access my respect (z), on my Microsoft Windows network, the network path is not found, the connection has not been restored.

  The PC called BrenLeeBolin is actually shot?  It is physically on the network?  Can you go to the BrenLeeBolin PC and see if the Z:\ drive is actually still there and readable / write?

• Problem with Windows Search 'Windows cannot access the specified device, file, or path. May not be the appropriate permissions for access you to computing.

  I have a very annoying problem:

  
  OT: Problem with Windows Search
  When I try to use Windows Search in the menu start I get the message "Windows cannot access the specified device, file, or path. May not permissions to access you the item. I get this message no matter what I type in. Therefore, I can't find something on my computer and continually to achieve this result.
  Could someone please help me solve this problem?
  I tried what answers I could find other peoples messages online, nothing helps. I'd appreciate any help.
  Thank you very much.

  Hello

  You did changes to the computer before the show?

  I suggest you try the steps from the following link:

  Error "Windows cannot access the specified device, path or file" when you try to install, update or launch a program or file
  http://support.Microsoft.com/kb/2669244

• Error when printing from a memory card: "year error occurred while reconnecting to \\epson 8af524\memory z card Microsoft windows network .the network path is not found connection .This has not been restored"

  Original title: there is an error occurred while reconnecting to \\epson 8af524\memory z card Microsoft windows network .the network path is not found .this connection has not been restored

  error message for a memory card has it printed

  Hello

  ·        Have you been able to print from memory card sooner?

  ·        How are you connected to the computer from which you are trying to print?

  This occurs when a computer uses the network map to connect to another computer to share files.

  To fix this problem, do one or more of the following methods.

   

  Method 1: Control equipment

  (a) ensure that the computer with file sharing turned on.

  (b) ensure that a hub network or router is powered.

  (c) ensure that the cables are well connected.

  If this does not resolve the problem, go to method 2: ensure that network resources are properly shared.

  Method 2: Ensure that network resources are properly shared

  Share a folder on a drive, then connect to the shared drive, follow these steps.

  Step 1:

  To make a folder that is located on the accessible hard drive on another computer, follow these steps.

  (a) right click onStart and then click Explorer .

  (b) right click on the folder you want to share, clickshare , and then click share this folder .

  Step 2:

  To connect to the shared folder from another computer, follow the steps below.

  (a) clickStart , then click run .

  (b) in theOpen box, type \\computer\share (where computer is the name of the computer where the resource network and share is the share name of the shared folder on that computer).

  (c) clickOK .

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Cannot add the vmkernel nic: a specified parameter was not correct. vSphere CLI + ESXi 4

  Hello. I try to add vmknic with frames in my distributed virtual switch.

  I read the vSphere command-line Interface Installation and reference Guideguide:

  "vicfg-vmknic - a-i DHCP"vmk5"

  I see the error message:

  Cannot add the vmkernel nic: a specified parameter was not correct.

  Vim.Host.VirtualNic.Specification.Ip

  What's wrong?

  I tried all the combinations of parameters with the same result.

  Ok! I've found a workaround.

  Since adding a vmkernel remote interface doesn't seem to work with DVS, I simply created one on a standard vSwitch and it then migrated to the DVS. And voila: the value 9000 MTU migrated intact with her! Here are the steps I followed:

  1. put the ESX host into maintenance mode - evacuate VMs manually if necessary

  2 remove the VMKernel iSCSI/NFS to the DVS interface

  3. create a standard virtual switch with no physical cards. He has no need to be a VMKernel VM Networking switch is fine. Make a note of the name you gave to the PortGroup created on the new vSwitch.

  4 using the remote control line, add the new interface vkernel specifying an appropriate jumbo MTU (9000) and the PortGroup on the standard new vSwitch. For example:

  esxcfg - vmknic.pl - Server

  If you get 3 answers, everything works. If you get failures, something has gone wrong. Go back and check that the interface is configured correctly using the command list esxcfg - vmknic.pl-.

  Enjoy!

  M

• Script to add a domain user to the local Administrators group raises the error "the network path is not found."

  I have a Windows Server 2008 R2 domain and a Windows XP Pro workstation that has been attached to the domain and then disconnected. I am trying to create a VBS script to add a domain user to the local Administrators group.

  I log on my computer as a local administrator and run the following script:

  Dim oNetwork: Set oNetwork = WScript.CreateObject ("WScript.Network")
  StrPC Dim: strPC = oNetwork.ComputerName
  Dim OGroup: Set oGroup = GetObject ("WinNT: / /" & strPC & "/ directors")
  Dim OUser: Set oUser = GetObject ("WinNT://domainname/username")
  oGroup.Add (oUser.ADsPath)

  This script returns the error "the network path is not found."

  However, I am able to go into control panel > user accounts > enter the user name and the domain name > click Next... > choose the administrators of the 'other' group and the user name will be added to the local Admin group.

  The same script runs without error if it is launched after logon on the workstation with a domain administrator account.

  How can I get my script runs without error, when you are logged into the workstation as a local administrator?

  Best regards, Andy

  The code that I used came from here. If the syntax of the Add method is passed to oUser.ADsPAth to "WinNT: / /" & domainname & "/" & username, the script works correctly.

  Therefore, the modified script:

  Dim oNetwork: Set oNetwork = WScript.CreateObject ("WScript.Network")
  StrPC Dim: strPC = oNetwork.ComputerName
  Dim OGroup: Set oGroup = GetObject ("WinNT: / /" & strPC & "/ directors")
  Dim strUser: strUser = "WinNT://domainname/username."
  oGroup.Add strUser

  Thanks to Qasim Zaidi to show the code of work here.

  Best regards, Andy

• ACS 5.2 error 22056 object was not found in the identity applicable store (s)

  Hi, I have two ACS v 5.2 (primary and secondary) and some users are in stor in-house and others are in the ad.

  Local site topology is like this:

  PC - AP - WLC - ACS - AD

  Authentication method is PEAP(EAP-MSCHAPv2), and all users have the company certificate installed. In users of client OS is Windows 7.

  Users worked very well, but some reports disconnections of intranet users. I see in the ACS connect many "22056 object was not found in the identity of the point of sale." and "24415 Active Directory user authentication failed because the user account is locked out" alarms.

  I thought that it was because the user located in the AD of basic data, but sometimes the same user is authenticated successfully and other that I see the "22056..." or "... 24415" alarm signals.

  I changed the primary role for ACS to works as secondary and we see the same alarms.

  I Don t know is a matter of ACS, and how to resolve this...

  Please helpme

  Thank you...

  Hello

  How you are authenticating these users? They are present in the local database of GBA? If so, have you checked the State from inside account to see if the user account is still active and that it is not disabled?

  Thank you

  Tarik Admani
  * Please note the useful messages *.

• Apex Oracle 10 g the requested URL /apex/wwv_flow.show was not found on this

  I searched the forum without being able to find a solution that works for me.
  I'm trying to create a table with the following sql.

  CREATE TABLE MEMBERS
  (
    MEM_NUMBER           VARCHAR2(12 BYTE) CONSTRAINT MEM_NUMBER_NN NOT NULL,
    MEM_SNAME            VARCHAR2(25 BYTE),
    MEM_FNAME            VARCHAR2(25 BYTE),
    MEM_ANAME            VARCHAR2(25 BYTE),
    MEM_TITLE            VARCHAR2(25 BYTE),
    MEM_IDTYPE           NUMBER(5),
    MEM_IDREF            VARCHAR2(120 BYTE),
    MEM_DATE_IDISS       DATE,
    MEM_ADD1             VARCHAR2(60 BYTE),
    MEM_ADD2             VARCHAR2(60 BYTE),
    MEM_ADD3             VARCHAR2(60 BYTE),
    MEM_ADD4             VARCHAR2(60 BYTE),
    MEM_PCODE            VARCHAR2(12 BYTE),
    MEM_PHONE            VARCHAR2(20 BYTE),
    MEM_DREG             DATE,
    MEM_TREG             DATE,
    MEM_DLAST            DATE,
    MEM_DBIRTH           DATE,
    MEM_DOBON            NUMBER(1) CONSTRAINT MEM_DOBON_NN NOT NULL,
    MEM_POST             NUMBER(1) CONSTRAINT MEM_POST_NN NOT NULL,
    MEM_NEW              NUMBER(1) CONSTRAINT MEM_NEW_NN NOT NULL,
    MEM_BARRED           NUMBER(1) CONSTRAINT MEM_BARRED_NN NOT NULL,
    MEM_SEX              NUMBER(5),
    MEM_BDAY             NUMBER(5),
    MEM_BMONTH           NUMBER(5),
    MEM_BYEAR            NUMBER(5),
    MEM_ANAL01           NUMBER(5),
    MEM_ANAL02           NUMBER(5),
    MEM_ANAL03           NUMBER(5),
    MEM_ANAL04           NUMBER(5),
    MEM_ANAL05           NUMBER(5),
    MEM_ANAL06           NUMBER(5),
    MEM_ANAL07           NUMBER(5),
    MEM_ANAL08           NUMBER(5),
    MEM_ANAL09           NUMBER(5),
    MEM_ANAL10           NUMBER(5),
    MEM_CARDNO           VARCHAR2(22 BYTE),
    MEM_FACE             NUMBER(10),
    MEM_ID               NUMBER(10),
    MEM_ENTRY            NUMBER(1) CONSTRAINT MEM_ENTRY_NN NOT NULL,
    MEM_CARD1            VARCHAR2(22 BYTE),
    MEM_TYPE1            VARCHAR2(4 BYTE),
    MEM_COLOUR           NUMBER(10),
    MEM_NAMEDAY          NUMBER(5),
    MEM_NAMEMONTH        NUMBER(5),
    MEM_ANIVDAY          NUMBER(5),
    MEM_ANIVMONTH        NUMBER(5),
    MEM_ANIVYEAR         NUMBER(5),
    MEM_NAMESPECIAL      VARCHAR2(4 BYTE),
    MEM_ITGNO            VARCHAR2(12 BYTE),
    MEM_GDREG            DATE,
    MEM_ENTERED_BY       VARCHAR2(16 BYTE),
    MEM_LAST_UPDATE_BY   VARCHAR2(16 BYTE),
    MEM_SIG              NUMBER(10),
    MEM_NO_GRAD          NUMBER(1) CONSTRAINT MEM_NO_GRAD_NN NOT NULL,
    MEM_FREE_PARK        NUMBER(1)                DEFAULT 0 CONSTRAINT MEM_FREE_PARK_NN NOT NULL,
    MEM_STATUS           VARCHAR2(9 BYTE)         DEFAULT 1                     NOT NULL,
    MEM_AUTH_STFF_CRDNO  VARCHAR2(12 BYTE),
    MEM_BARCODE          VARCHAR2(37 BYTE),
    MEM_BADGE_NUMBER     NUMBER(16),
    MEM_GRPADDR_NAME     VARCHAR2(50 BYTE),
    MEM_DISP_NAME        VARCHAR2(25 BYTE),
    MEM_DIST_FRM_CASINO  NUMBER(24,4),
    MEM_GEO_CODE         NUMBER(5)
  )

  and the answer I get from the Apex is: -.
  The requested URL /apex/wwv_flow.show was not found on this server
  
  Please tell me what I'm missing.

  Try to run in sqlplus.

  There is a difference between your 2 attempts to validate the statement. The second includes a schema qualifier:

  CREATE TABLE SGM.MEMBERS...
  

  You run that he logged in as user SGM?

• System cannot access the windows installer (error 641)

  original title: System cannot access the windows installer

  Have free AVG and cannot uninstall it or install the Windows updates. message is "cannot access the Windows install. Get error 641 on windows. Vista home premium 32-bit operating system. Recently downloaded IOLO System Mechanic recommended by DELL. problem seems to be since then but do not respond IOLO

  Download a FREE program called Revo Uninstaller

  http://www.revouninstaller.com/revo_uninstaller_free_download.html>. It allows to uninstall any program completely, including the files of monitoring programs. works very well, that you should have no problem more reinstall after uninstall this program.

  Just don't allow the computer to restart if the part of Revo Uninstaller asks you if you want to restart now or later. Select afterwards and let Revo finish an orphan looking for registry entries. Reboot after Revo ends.

  TIP: If you still think again your registry database must be cleaned, repaired, amplified, to the point, healed, twisted, fixed, enlarged, "swept" or optimized (it isn't), readhttp://aumha.net/viewtopic.php?t=28099 and draw your own conclusions. See alsohttp://blogs.technet.com/markrussinovich/archive/2005/10/02/registry-junk-a-windows-fact-of-life.aspx

  The Mechanic.and of dumping life system you will be happy.

  UTC/GMT is 09:11 Sunday, May 20, 2012