Cannot access the raid config in the BIOS on m8330f

Similar Questions

• HDX18: Cannot access the BIOS with F10

  Try to access my BIOS to set the boot on USB device sequence. Can't!

  Power and press F10 repeatedly does not bring me in the config of the BIOS beeps fair to me when my keyboard buffer is full and then continues in charge of the operating system.

  Never see option to press the keys to access BIOS either.

  Thanks for trying to help out.

  My system is a laptop from earlier versions of Windows 8 (2010) and MUST have posted the option to enter in the configuration at the start, but didn't. I had previously improved OS 32 bit to 64 bit - who created another folder Program Files, which in turn have brought masses of disk space. I then upgraded to Windows 10 and did not like the slow, he ran then, I wanted to install a clean Windows 10 and created a bootable USB device. That's when I found I couldn't access the BIOS to change my boot device.

  After trying everything I could find without success, I started the machine and once Windows has loaded, I pressed the SHIFT key and select restart. This brought me to the screen Menu UEFI. I went to watch each of the options - no led me across a good kind, I moved back to the main menu screen and clicked on continue - go out and continue to load Windows.

  After getting a black screen, I can FINALLY see the option - press ESC to enter Setup... Hooray!
  
  Problem solved - for now!

• Cannot access the BIOS on the Satellite L40T-A202

  Hello!

  Months ago, I've updated the bios of my laptop Toshiba L40T-A202. After reboot I can't access the bios. I fixed it by jumping the jcmos into the mobo. Now the problem occurrd again and I can't seem to fix it with the same problem I did.

  Can someone help me? This laptop was bought abroad and I don't want to spend a lot of cash and send it to the repair shops.

  Please help me on this.

  > I fixed it by jumping the jcmos into the mobo
  With this action, you certainly killed the guarantee. I really don't understand what was the reason for this action.

  For a better understanding, I have a few questions for you:
  Have you successfully updated the BIOS?
  You can start your machine properly?
  See Toshiba welcome screen on startup?
  Windows starts as usual?

• Cannot access the BIOS on my Satellite U940-11 t

  Hello

  I have a problem with my computer.
  I installed a dual-boot Ubuntu/Windows 8.
  I disabled the UEFI mode in order to install Ubuntu. But now I have more access to Windows, and I can't go into the BIOS menu to activate the UEFI.

  I tried all possible combinations (F2, ESC, F12, F10, F8, DEL,...) and none of them opens the menu of the BIOS.

  I read on a forum that if I put my battery, it will work, but it didn't.

  How can I access the BIOS? Is there a secret combination that I have not yet tried?

  Thanks for your help.

  The F2 key is the right one to access the BIOS.
  Try this method:
  Press F2, and then press the power button to power the unit in place.

  By the way: Windows 8 and 8.1 Win requires the permit secure boot and UEFI boot mode.

• P7 - 1287c: cannot access the BIOS menu!

  Sounds stupid... but I can not access my bios, I tried every recommended keystroke (post start splashscreen).  Assistance would be appreciated!

  Yes, very frustrating!

  It is a shot in the water, but what do we have to lose?  Try unplugging the hard drive to see if you can access the BIOS.

• Cannot access the BIOS Setup

  Hello

  My laptop is X61s. After I installed Vista fresh and cool RnR, I am unable to access the BIOS by pressing the blue ThinkVantage button. It automatically jumps at NRR. There are no other options to enter the BIOS.

  Help, please!

  Thank you!

  Instead press the blue button, press F1 and you will be able to enter the BIOS.

• Cannot access the BIOS on Aspire M

  Greetings, Acer community.

  I am a junior high school with a year + old Acer computer which broke down twice and is now out of warranty.  I bought this computer with my own money.

  My laptop Aspire M does not start because of the 'boot configuration file becoming invalid', that's at least what the blue screen States "recovery."  The offeres blue screen with "press Esc for UEFI firmware settings, but is not admissible.  I tried F2, F8, F10, Alt + F10, F12, bar space, Delete, and pause to try and activate the BIOS interface, just as unsuccessful.

  I followed the instructions to buy Acer recovery tools, but without being able to access the BIOS to set the boot order, I just sank another $25 in a laptop that does not work.

  The cost of the service exceeds the cost of the laptop, so I tend to keep trying to fix it myself.  If he can't ' be repaired, there is little chance I will buy a new Acer to replace as this has been a very frustrating experience.

  Help, please.

  -Lauren

  Update!

  Well, first, I removed the HARD drive to try to get the BIOS F2-interruption of the boot sequence.  No luck.  So, it was off looking for the battery CMOS, which I thought might help interruption control W8 (or something else) could have on my sequence start, and as such, did not get to the BIOS screens.

  AND while poking around on the forums, YouTube and the manual - I found on the ACER site, I came across the port of "battery reset" on the merits of the case, which could be used for all disconnect all power from the system.  Seemed to be a promising option.  So, before you tinker with the CMOS, I pressed the reset button of battery for 4 seconds, using a small paper clip and VOILA!, after a power cycle, the bios screens were once more accessible usign F2, etc.  (Obviously, the keyboard is working very well.)

  I returned to screens Alt + F10 to try to * repair * the system using the functions of recovery aboard, but NONE of these options might work, they complain of a locked hard drive no boot device, the missing files of corruption or start-up sector.  Partial, complete repair, troubleshooting, none of this would work.

  Thus, using the system discs that I had already bought, I searched recharge the system entirely.  After you change the boot sequence, placing the CD/DVD drive to the top of the list, I inserted the disc system, rebooted and was on my way.

  I worked my way through the recovery system, three discs and your language and wait now for the freshly loaded operatign system complete the installation of all hardware and software components.  I am sure that this will solve my problem.

  I just wish that I would have realized that this little stupid option disconnect battery existed a few weeks ago.  Persistence is paying off, I guess.

  -Lauren

• Product: HP Pavilion Notebook-PC G7, cannot access the bios settings/turn off the keys f1 - f12, please help!

  I got this laptop PC in 2012, it is a series of G7, I'm pretty sure. My problem is that when I turn the computer off and turn it back on, there is no option to open the menu of the bios (esc) or any option besides. Just a symble blue HP directly in the middle of the screen with a symbol of little loading below him. I pressed ESC, f1 - f10 and virtually all other keys to try to access it. What I really want to do is to disable most annoying f1 - f12 function keys.

  I'm no longer under warranty and my operating system is Windows 8.  There is also no error at all, just no response what that's right don't charge up to login password screen.

  Please help and contribution is appreciated.

  Hi 2livewire4,

  Welcome to the HP Support Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  I see that you are looking to access the BIOS of your laptop Pavilion. You can't access BIOS in the same way on Windows 8, because you have a faction of a second to get the right timing because of the quick loading of Windows 8 feature. This third party link will show you how to access the UEFI that will lead to the BIOS. You can also do it from the Windows 8 login screen as this Microsoft link will show. Here is a document from HP support disable the function on some models Fn key combination +.

  Thank you

• Cannot access the Bios Uefi more on E535

  Hello community,

  I recently bought a new laptop E535, works like a charm so far. Access BIOS was possible by pressing enter directly after machine, that came a kind of JOB analysis which could be ignored by pressing any key and that came a kind of table where I could access Bios by pressing a key (do not remember which it was exactly). Otherwise I could enter Bios when the boot menu by pressing tab, who passed on another tab where Bios could be entered (also a kind of diagnosis of the programs could be launched). As mentioned in the subject, it is impossible for me to do that now, after I did the following:

  -traded integrated with a new (access still possible Bios) SSD HDD

  -changed in the BIOS boot mode, both (legacy + UEFI) in Uefi only (maybe it's the problematic point, but I'm not sure)

  -Installed Windows 7 using Uefi on ssd

  Not when I press on enter on startup it brings me to the Windows boot menu manager (you know where you can say to start Windows normally or in safe mode and so). Menu of startup has also not changed with a new section "starting windows" (finally), but when switch to another tab, it is empty now, no entry for Bios setup or diagnostic tests more.

  It's really bad. I googled around and tried the following until now without success:

  -Pressing F1 instead of entry

  -Portable stop and start with F1 key

  -boot without HDD

  -from HARD drive without amendment, which was originally installed in the laptop (which cannot be started more, probably because it has been installed in legacy mode)

  I also thought about flashing the bios, but the latest version available on the lenovo support seems to be 1.04, but pre installed on my laptop is 1.10, so my version is much more recent. Should I try to still the flash?

  While looking around, I found a post that looks like a lot to my problem, but without any other ideas how to solve this problem except for mail in my machine:

  http://forums.Lenovo.com/T5/ThinkPad-edge/edge-E320-can-t-enter-BIOS-after-changing-from-UEFI-to-leg...

  Thanks for your help

  Best regards

  Morco

  It seems to be a very rare problem with installing Windows 7 in UEFI mode, thanks to the help of the "someotherguy" forum member I could solve it. Others running into the same problem should contact him directly.

• Reference Dell 760 does not start, cannot access the bios menu

  Desktop Dell 760 not start and displays a message: unsupported video configuration detected. I can't access installation or the bios menu. any ideas?

  http://support.Dell.com/

  Link to Dell technical support above.

  http://support.Dell.com/support/topics/global.aspx/support/DellCare/contact_us?c=us&l=en&s=Gen&redirect=1

  Reference Dell coordinated at the link above.

  I'm sorry, but we cannot help you with Bios problems.

  See you soon.

  Mick Murphy - Microsoft partner

• Re: Tecra M11 cannot access the BIOS

  I have a brand new machine Vrab M11 - 11L. I have set a password on the BIOS, but it can now access all the. When I turn it on I get the home screen Toshiba, I press the ESC key and am presented with a little note saying "F2 for Setup. I press F2 and the screen turns off, I get a sidekick flash slider three times at the top of the screen and then it boots into windows. I need to change a setting that is not covered by HWSetup. I can't enter HWSetup with my password, but it is useful for me!

  Hello

  First try * INS button, then * F2 button
  In my case it worked!

• Need to do a system restore. When the computer starts and I cannot access the BIOS menu - help please... (WinXPSP3)

  I need to change the boot order, so the installation CD starts first-I can't enter the Bios at Startup Menu.

  It's a HP Pavilion that says F1 is supposed to allow me to access the menu of the BIOS at startup.  I also tried:

  Tip There are other keys that provide access to the BIOS. They include the following:

  o F1

  o F2

  o F10

  o, CTRL + ENTER

  o ALT + ENTER

  o, CTRL + ALT + ESC

  o, CTRL + ALT + INSERT

  And kay LED does not work either.  It's Windows XP - 32 bit home.

  Service Pack 3 is installed - SpySweeper is anti-virus and using the Windows Firewall.  This computer were of Trojan horses (40) and finally the browser was re-directed.

  Thanks for any help.

  It shud be a Hp tool installedon your system with which you can edit boot options even after logging on to XP.

  Its something like HP or Credential Manager protection tools.

  Maryse Agarwal

• Cannot access the BIOS menu

  Good if some time ago that I bought the Dell XPS 8500 and since I never was able to access the menu of the bios, but it never bothered me until now so, if anyone knows what that is wrong or needs more information let me know please because I think it's a pretty serious problem now.

  To win 8, open bar charms and select settings, and then change the settings of PC. Then select update and recovery. Then recovery, then Advanced Startup, then help, then UEFI Firmware.

  You can also get there during a cold start. Start the computer, hold down the shift (the key perhaps) left and continually press the F2 key. You should get the BIOS, which is now called UEFI.

• Equium A300D-13 x - cannot access the BIOS Setup

  Hi, thanks for the research.

  The hard drive on the laptop went faulty then replaced it with a new one... but when turn and select F2 to check the bios or F12 to change the order of boot on cdrom. I get the message "entering setup... If please wait"but nothing happens.

  Tried without any hard drive but the same result. Any ideas anyone?
  See you soon

  He works before upgrading the HARD drive?
  Remove the HARD drive and try again?

• Satellite L755-129 and Win8.1 - cannot access the BIOS settings

  Hello

  I have a L755-129 satellite and I have the version of windows 8.1 update in my laptop. I want to open the bios of my computer and I can't do it?

  What is going on? Also I can't find in the windows recovery Panel. Key F2 and F12 does not work, when I press it, the laptop starts beeping beep and starts in windows.
  Can someone help me? I don't want windows 7 I like windows 8.1.

  Thank you for your help

  It's really good that you posted this question. So far on this forum many people ask the same questions, but all have been at the origin of new machines of Win8.
  Now we have the situation with the old machine Win7 but with Win8 preinstalled.

  Solution for other people needed to proceed to a complete stop and after doing this, it was possible to enter the BIOS settings. Check it please http://aps2.toshiba-tro.de/kb0/TSB2B03EY0002R01.htm

  This situation does not for me so here's a question for you:
  When you start your laptop, I guess you can see the Toshiba start screen. With F2 option is shown on the bottom of the screen?

• Portege Z30 - cannot access the bios Setup

  Hello

  I can't enter BIOS setup when starting. Pressing on F2 allows me to enter the master password and HDD/SDD (confirmed validation), but the screen freezes at the "Toshiba configuration utility' graphics without any progress.

  This problem began to appear quite suddenly, I enter the setup of BIOS several times before without any problem. The only change that's happened that I know is an event of disruption/recovery failed.

  My suspicion is that the laptop is now in the start-up of hi-speed system. Can anyone confirm that? Is it possible to force it to boot normal start time? I'm using Linux, so I can't use the Windows of Toshiba Utilities.

  > I'm using Linux, so I can't use the Windows of Toshiba Utilities.
  That s bad:(dans le Toshiba HW Setup vous trouveriez un paramètre pour modifier l'option vitesse de démarrage.)

  > My suspicion is that the laptop is now in the start-up of hi-speed system. Can anyone confirm that?
  Hmm in my opinion, if the start-up speed would be set to fast, you wouldn't be able to press F2 and enter the BIOS password.

  However, in other cases, if the startup mode is set to fast, you can enter the first INS key BIOS and press the F2 key

  Give it a try.