Cannot access the recovery command prompt Vista computer network

I have Vista machine over the network to a Windows 7 computer and used wbadmin to perform a backup of the Vista machine on a shared folder on the Windows 7 machine. Now I want to access it from the Vista recovery command prompt (after the start of the DVD). I can't access the folder.

I ran first startnet. I assured that the folder has received the maximum share permissions. However wbadmin get reports versions "could not read the backup destination. I tried dir on the network share location and it says "access denied." I tried net use on the network share, location, entered the correct user name and password, and he noted "the provided user context is not valid.

The share is accessible when Vista is started normally.

Hello

Check if you put in the correct username format, example:

Enter the user name for : \username
Enter the password for :

If they continue to have problems, I suggest you repost the question TechNet.

http://social.technet.Microsoft.com/forums/en-us/category/windowsvistaitpro

Amrita M

Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.

Tags: Windows

Similar Questions

  • Cannot access the recovery of factory on Satellite A500D

    I'm having trouble booting Windows (Vista Home Premium) on a Satellite A500D. The problem started when I connect after being inactive for some time. During the connection process, the screen froze. I waited a few minutes before finally turning off the computer using the power button.

    Since then, the system won start t again. I was able to get to the advanced startup options (F8) and now I can choose "repair my computer". But nothing happens after that, except a black screen and after a while a slightly larger than usual, white mouse pointer. After that nothing, but if I wait long enough the computer turns off.

    Unfortunately, the recovery disk that I created when I bought the computer was damaged when I moved into a new apartment. So I t nor have this option. Any suggestions on what I can do to bring back to life again?

    And would it solve the problem if I bought a new drive with windows vista home premium and use it instead of a recovery disk? If it is an option, it would also work if I bought a disc with windows 7 or XP, cause I put t really like Vista anyway so I don't mind switching.

    Any help is appreciated (and apologies if I put t make sense, English is not my native language).

    > Any suggestions on what I can do to bring back to life again?
    I agree with you that recovery image installation is maybe best solution for you. I put t know why you can not start installation of recovery image but the problem is that you can't force anything. Either it works or not.

    All you can do is try several times, but if there is no success I m afraid you have only two options:
    -for new order recovery disc - https://backupmedia.toshiba.eu/landing.aspx
    d ' install own OS by using the original installation disc from Microsoft

    What do you think of this?

  • Pavilion g series: cannot access the recovery partition & disk do not work

    Try to reset the computer to factory since it does not start in Windows.

    When I try to enter in recovery "esc then F11" it will just try to load windows. Recovery partition is still there just can't access.

    So I try to use disc 5 figure set I did 3 years ago & it starts on the 1st cd, but I get a message saying that the disk is not for this computer.

    I'm like what?  This computer rendered & I have the best recollection no changes to anything that should have caused the recovery to think that there is another computer.

    Suggestions on what I might have to do in order to recover my computer to the factory?

    How can I access the partition recovery from normal mode does not work?

    Why the hell does not work my cd?

    I bought the computer again.

    Any help would be greatly appreciated.

    onelunger wrote:

    Thanks for the suggestion, but I can't return to Windows, even in safe mode.

    If this is the case, then you need the recovery media you can perform a factory image recovery.

    You can remove the hard drive and connect it to another PC through an external drive enclosure or a usb cable to sata. Which will allow you to copy your important data from the drive to another device of storage for extra security.

  • Dell has developed a passwoord and cannot access the Windows XP system on a network share in Windows 7.

    Original title: network router, XP computer and Windows 7 laptop computer dilemma.

    My system XP computer is part of a network using a router. I also have a laptop Windows 7, using the same network. Reference Dell set up a password so that the network is not accessible without password, reducing the risk of piracy. Now, I can not in the XP system because of the defined password.  How to reset or enter the password on the XP computer?

    Hi Scottid2,

    1. do you receive error messages when you access the Windows XP system?

    2. What is the password being set by Dell?

    You can check in the Windows 7 system if the password protected sharing is enabled. When protected by password sharing is enabled, people using other computers on your network cannot access your shared folders or printers unless they have a user account on your computer.

    You can turn off password protected sharing and check if it helps.

    For more information, see the articles:

    Why can't I connect to other computers?

    Networking of computers running different versions of Windows

    As the password is set by Dell, you can also consult with support of Dell for the same thing:

    Dell support

  • Cannot access the calendar from Windows Vista Home Premium all of a sudden... get error message indicating it is disabled... Help, please!

    After 1 year with the help of Windows Calendar on Vista Home Premium, I'm suddenly not able to use it (impossible to add new appointments and stored all appointments have mysteriously disappeared). I get a message saying "You cannot add appointments to a calendar that is disabled" the details of State "access denied." ... How is - it happened 'out of nowhere '? How to activate it? It's very frustrating... I searched the forums and Microsoft google the question. I found some results suggesting to either change the registry or download the fix automatically and manually merge in my registry. I tried both with no result. I have event tried to remove the old calendar and create a new one... still nothing. Any suggestions? Help, please!

    Hello NYintelligentinvestor,

    Thank you for using the Microsoft Windows Vista Forums.

    Sorry, you have a problem with that.  What type of entry you are trying to add?

    Look at the calendar and on the left side, to half way down you will see a small block that will have something like "NYintelligentivnestor schedule" - there is a small block to the left of this one. To activate the calendar, click on the box to place a check mark in it.

    If there are calendar shown in this block, then go to "file" on the main toolbar and click on "new calendar" - one should then appears in a block with a check mark in the box on the left.

    I hope this helps. Please let us know status.  Thank you! Engineer James Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

  • Windows automatically restarts constantly, cannot access the system restore point, cannot access the computer in safe mode

    Hi all

    For the not 24 hours I tried to access my computer in normal mode. When I turn on the pc, it says "configuration data 1 of 3 steps...". 0% complete"he never spent 0% and within seconds, it automatically restarts and starts again. It's so frustrating! I have a windows vista pc (purchased in ' 06). I can only access my desktop in SafeMode.

    I tried to perform a system restore, but not like he says "recovery disk is not the restore point selected. What should I do? I tried to manually create a restore point, but cannot access the system and Maintenance, while in safe mode. I can't do anything but literally access the internet. How can I get Windows back to factory settings it is with these limited resources? I have a Dell reinstallation DVD.

    I searched my programs and found that recently Windows automatically updated and downloaded "Microsoft Powerpoint Viewer" and "for 2007 Office system Compatibility Pack '. Now, I think it has something to do with it, because they were the most recent updates, before the pc crashed. But I also fear that it may be a virus, which has completely hijacked this PC. How am I supposed to get rid of a bug, if I can't even get the necessary antivirus?

    Sorry for the ranting, but it's so stressful when my pc is completely down. Please, please please help me. Thank you in advance for reading this same!

    Arianne

    Hello

    you talk about restore and system recovery disc in the same breath

    they are 2 different things

    and you can NOT create a restore of yesterday and today!

    yesterday is gone

    If it does not already; You can't do

    1st thing to try is a restoration of the system in safe mode

    http://www.windowsvistauserguide.com/system_restore.htm

    Windows Vista

    Using the F8 method:

    1. Restart your computer.
    2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
    3. Select the Safe Mode option with the arrow keys.
    4. Then press enter on your keyboard to start mode without failure of Vista.
    5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
    6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

    If that does not read this information

    the link below is how to download and get a vista disk startup repair, which you can start from the

    http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

    Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

    http://www.bleepingcomputer.com/tutorials/tutorial148.html

    to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

    It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

    Change boot order it do dvd drive 1st in the boot order

    http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/

    The malware removal:

    Download update and scan with the free version of malwarebytes anti-malware

    http://www.Malwarebytes.org/MBAM.php

    You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

    http://www.bleepingcomputer.com/download/anti-virus/rkill

    If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking

    Windows Vista

    Using the F8 method:

    1. Restart your computer.
    2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
    3. Select the Safe Mode with networking with the arrow keys.
    4. Then press enter on your keyboard to start mode without failure of Vista.
    5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
    6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

    Reinstall vista from Dell DVD

    http://supportapj.Dell.com/support/topics/global.aspx/support/DSN/en/document?journalid=67E9C215C4BABD6CE040AE0AB5E14F05&docid=339949

  • New Win 7 computer cannot access the IP address of the network printer. Help, please.

    Greetings,

    -----------------------------------------------------------------------------------------------------------------------

    UPDATE: we have found the solution to this problem, we, and that I posted an explanation as well as two ways to solve the problem in my 2nd post on May 5, 2015. Scroll down to it for the solution. Unfortunately, Microsoft does not allow the OP to mark one of their own messages as 'the Answer' so this thread continues to be listed as "no answer" when he actually answered me.

    -----------------------------------------------------------------------------------------------------------------------

    The original message follows...

    We cannot sign a new Win 7 (64-bit) computer to a printer ethernet established in our local network of 'working '. We have reached the limit of our troubleshooting skills and expertise assistance.

    Our Local network
    ------------------------
    The printer is a Dell 5100cn workgroup laser that is connected via an ethernet cable to a 10/100 workgroup switch 5-port Cisco/Linksys. The switch is connected to the built-in cable Motorola modem / 4 port gigabit router / WiFi access point. There is no server between the printer and the network.

    Other computers on the network run also Win 7 and have no trouble seeing and using the printer. Some computers are connected via a gigabit ethernet cable to the router Motorola. Other computers connect wireless WiFi (once again, by the same Motorola device). All computers, including the new ones, are attributed to the same workgroup.

    The printer has a static IP address. It also has an integrated Web page accessible within the network via a browser to view the status of the printer. All previous computers can view the status of the printer Web page by entering its IP address in a browser.

    The new Win 7 computer
    --------------------------------
    At the Windows command prompt, we successfully ping the IP address of the printer and received a return signal. However, we are unable to connect to the IP address of the printer (and status Web page) with a browser. And we cannot find the printer when install us the printer driver. We have tried to turn off the Windows Firewall and it did not help.

    When we install the driver, move us as a 'local' printer and create a new "Standard TCP/IP Port" for her. We enter the static IP address of the printer and name the port. Define us the Protocol to "LPR", enter the name of the queue ("lp") and activate SNMP State with name of the 'public' community and the index "1". These settings have worked very well with our previous computers.

    When the time comes to 'choose printer', we select 'have disk... '. ' and use the Dell 64-bit for this printer driver. But it does not work and do not print a test page. We even tried to install the printer as a 'network' printer driver, but it does not, either. In addition, the 'local' method always seemed to work best in the past.

    The new computer has no harm to see other computers and devices on the network. For example, there is a NAS connected to the same switch Cisco/Linksys like the printer and the computer can access the NAS via its static IP address. The new computer can also access the internet. He can't use the IP address of the printer. We even tried to change the address IP of the printer, but that did not help either.

    Despite the fact that the work - the network troubleshooter Windows command prompt ping indicates that the printer is not responding. What do we lack? Help, please.

    Greetings,

    I hope that this will be our last post on this subject. We have discovered the source of the problem and can offer two 'fixed' in case someone else runs into the same situation.

    With the help of MSConfig and a process of elimination, we have disabled non-Microsoft services that were running on the computer until we discovered that "Qualcomm Atheros Killer Service V2" was the source of the problem.

    Explanation

    ----------------

    Our new Win 7 computer contains a communication module ethernet/WiFi/Bluetooth e2200 Qualcomm Atheros. The manufacturer provides a '' Killer Network Manager '' for this system. Its purpose is to monitor and control the flow of data over a network connection in order to optimize for. For example, the user can choose to give the program A high priority and program-B low priority. This ensures that the program-A is less lag in the network traffic.

    The primary market for this function, so far, has been the online game (where the name of 'Killer'). It allows players to channel the bulk of the bandwidth available to their game and away from other programs and services that are running at the same time. A response faster online gives the player the advantage it needs to get "kill him" before someone else.

    This system of control of bandwidth has interfered with data packets of return of our network, clearing communication between our computer and our printer printer.

    Difficulty 1

    --------------

    The simplest solution for us was to disable 'Qualcomm Atheros bandwidth control' for the ethernet NIC that has been accomplished by going to: Windows Control Panel > network and Internet > Network and Sharing Center > change the settings of the card (in the sidebar). Then we clicked on our connection to the LAN (our NETWORK ethernet card) and select the 'Properties' command Finally, on the Networking tab, we have disabled 'Qualcomm Atheros control bandwidth' and clicked 'OK' button to close.

    All that was needed after that was a quick restart and we were able to access our printer even with the killer Network Manager and functioning of Qualcomm Atheros Killer Service V2.

    Either way, we left the control function of bandwidth enabled for wireless (our) network connection because we do not plan on using this network printer when the computer is untethered to ethernet.

    Difficulty 2

    --------------

    If you don't want the killer running Network Manager on your computer, you may be tempted to uninstall. Do not! Uninstall will also uninstall the drivers needed for your ethernet, WiFi and possibly your Bluetooth as well. We heard that some users have communicated with Qualcomm and were able to coax, on their part, the necessary drivers comm without luggage "Killer". But you don't need to do it, either.

    All you need to do is: (1) remove the 'Killer Network Manager' of the '"start up" folder of the start menu of Windows (under "programs") and (2) using MSConfig, uncheck "Qualcomm Atheros Killer Service V2" under the ' Services ' section. Then reboot and you're good to go. The killer Network Manager and his service will not work.

    Moreover, the reason for which we did not chose this method, ourselves, is because we see one deserves that available Killer Network Manager so that we can block network traffic to select programs. Solution 1 converts this easy thing because the Ethernet bandwidth control can be quickly activated again if she is ever desired. And we're leaving it enabled for our WiFi.

    Best regards, David-EH

  • HP 15 laptop: laptop computer is connected to the wi - fi connection, but cannot access the internet

    Hello

    My problem is my WiFi says its connected but I can't browse or access the internet.it just tells me "unable to connect to internet computer is not connected to the internet", but my wifi says 'connected'.i tried to go to the cmd prompt and typed in "netsh int ip reset resetlog.txt c:\" goal it shows me "reset failed.access is denied .he don't s no user specified settings to be reset to zero." please "» What can I do?

    Thanks in advance.

    Hello @jerome256,

    Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums, I would like to draw your attention to the HP Forums Guide first time here? Learn how to publish and more.

    I understand that you are having a problem with your WiFi and wanted to help you!

    You are trying to access WiFi through router?  If you are connected to your wireless network, but cannot access the internet, then the problem may be with the router.  Check that the router is connected to the internet.  If you have more than one router, then you can ensure that you are connected to the correct router.  You can also try unplugging the router for about 30 seconds, and then reconnecting it.  Please consult the following document, as it can help solve the problem for you:

    HP PC - Troubleshooting wireless network and Internet (Windows 10)

    Please let me know if this information has been helpful by clicking the thumbs up below.

    Have a great day!

  • I have 2 laptops and one desktop. Desktop & laptop are very good. 2nd laptop computer cannot access the internet. I get a message media disconnected. I tried everything please help. I use Windows XP

    I have 2 laptops and one desktop.  Desktop & laptop are very good. 2nd laptop computer cannot access the internet. I get a message media disconnected. I tried everything please help.  I use Windows XP

    Hi JessaRoy,

    · The computer connected to the network or are they computer autonomous?

    · What is the number and the model of the computer?

    · What is the service pack installed don the computer?

    · What is the full error message with the error code, that's all?

    · What are the steps you tried to solve the problem?

    Try the steps from the link below: to test TCP/IP connections by using the ping and the commands net view: http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/sag_tcpip_pro_pingconnect.mspx?mfr=true

    With regard to:

    Samhrutha G S - Microsoft technical support.

  • (0x80070005) error on my dell Telechareger (studio xps 435mt) windows vista Home premium. Windows cannot access the specified device, path or file. I can't have the appropriate authorization to access

    Don't leave me in what in folders and files (c). IM locked it says that I may have not permission to 20 c to access. Thank you

    Hello

    Were there any changes made on the computer before the show?

    Method 1:

    Check the link and see if it helps:

    Error "Windows cannot access the specified device, path or file" when you try to install, update or launch a program or file

    http://support.Microsoft.com/kb/2669244

    The article also applies to the Windows Vista operating system.

    Note: run the computer without antivirus software or firewall is a potential threat to the computer; Be sure to activate security software after completing the troubleshooting steps and after identifying the problem.

    Method 2:

    Check out the links and check if that helps:

    What are the permissions?

    http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-permissions

    What to know before applying permissions to a file or folder

    http://Windows.Microsoft.com/en-us/Windows-Vista/what-to-know-before-applying-permissions-to-a-file-or-folder

  • Vista Home Premium gives the message "linked to limited accessibility" and I cannot access the internet.

    I have Vista Home Premium and trying to connect to a WiFi spot, I get the message "linked to limited accessibility" and I cannot access the internet. I understand this is common for Vista and there is a fix for this problem, but want to make sure that I get the right one and can't seem to find anything referring to this issue on the Microsoft site

    Hello

    This problem happens only when connecting to a particular place for the WiFi?

    You can follow the suggestions and check out them.

    Method 1

    You can read the article.

    Message when a device on a Windows Vista-based computer uses a network bridge to access the network: "connected with limited access".

    http://support.Microsoft.com/kb/930517

    Method 2

    Disable IPv6.

    Try to uninstall IPv6 on all interfaces, the removal of virtual cards of IPv6 and reset the TCP/IP stack. To remove the IPv6, go to the properties for each network adapter, and deselect the check box next to the Protocol "Internet Protocol version 6 (TCP/IPv6), which will turn off, or select it and click on uninstall, which withdraw power off the computer.» Then go into Device Manager and remove any 4to6 adapters, adapters miniport WUN or tunnel adapters.

    NOTE: You should do this for each network connection.

    Method 3

    Temporary disable your security software.

    Disable the antivirus software

    http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

    Enable or disable Windows Firewall

    http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Firewall-on-or-off

    Note: Software antivirus and firewall can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attack.

    Method 4

    You can reset the TCP/IP stack.

    How to reset the Protocol Internet (TCP/IP)

    http://support.Microsoft.com/kb/299357

  • My e-machine computer broke down and I'm unable to access the recovery partition. How can I reinstall my operating system?

    I have an emachines el1200-07w that crashed. It has windows Vista Home Basic. I can not access the recovery partition and emachines has no recovery for this model CD. can someone help me?
    original title: windows vista problem

    Hello

    Some manufacturers have more available Vista recovery disks.

    As happened with eMachines, you may have to try this instead:

    You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

    Other manufacturers recovery DVDs are should not be used for this purpose.

    And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

    See you soon.

    p.s. Here are some reviews of Recovery - Disks.com.

    Beware of who you buy on the Net

    http://www.Yelp.com/biz/recovery-disks-com-Vancouver

  • Error: Windows cannot access the specified device, path or file. You can not have the appropriate permissions to access the item. Vista 32 bit

    Hi, I got this error. Ex: I try to install something (a game or whatever it is) it says: 'Windows cannot access the specified device, path or file. You can not have the appropriate permissions to access the item. Even when I try to open a normal program like Regseeker, he keeps giving this error. Can someone help me?

    It appeared yesterday at 22:00. I tried the system restore, but it does not help, he keeps coming back.

    I use Windows Vista Home premium x32bit.

    Thank you

    Xemidan

    I ran my computer in safe mode with network support. As I re-installed programs that have these problems, the family disappeared from the error.

    Now, they're starting to the top and download things exactly as they were normally. In any case, thanks for the help.

  • WIN 7 cannot find cmd or command prompt on WIN 7. Using the search box

    Cannot find cmd or command prompt on WIN 7. Using the search box

    Shirley

    You do not search to access the command prompt. Select Start, all programs, accessories, right-click right-click command promptand click run as administrator on the menu drop down.

  • Error message: "Windows Media Player cannot access the file. The file may be in use, you won't have access to the computer on which the file is stored, or your proxy settings are may not be incorrect. »

    Original title: problems of residential group after system recovery

    I started a homegroup on my computer.  I added another computer to the homegroup.  Everything worked fine until I had to perform a system recovery on the laptop that I used to start the homegroup.  I implemented the homegroup again, but I can't access the files on the other computer via Windows Media Player.  I get an error message that says "Windows Media Player cannot access the file. The file may be in use, you won't have access to the computer on which the file is stored, or your proxy settings are may not be incorrect. "I can access all the music files via Windows Explorer.  I have to start over with a new password?  Can I just create a new homegroup?  What other options do I have?  You can provide any help would be greatly appreciated.  Thank you.

    Hello

    Please follow the methods and check the issue:

    Method 1:

    Open the homegroup troubleshooting utility:

    http://Windows.Microsoft.com/en-us/Windows7/open-the-HomeGroup-Troubleshooter

    Method 2:

    Why can't I access my homegroup? :

    http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-access-my-HomeGroup

    For reference:

    Homegroup: frequently asked questions:

    http://Windows.Microsoft.com/is-is/Windows7/HomeGroup-frequently-asked-questions

    Method 3:

    See the steps in "include a folder shared in a library" from the link below:

    Access to files and printers on other homegroup computers: http://Windows.Microsoft.com/is-is/Windows7/access-files-and-printers-on-other-HomeGroup-computers

    I hope this helps.

Maybe you are looking for

  • The purchase amount is not displayed

    Hello. I bought an application about two weeks ago, but the transaction does not appear in my bank account.

  • G4050 analyse, because of the acute sounds

    DESCRIPTION OF THE PROBLEM: 1. I have a two-year-old HP Scanjet G4050 2 up until yesterday, he analysed very well 3. as of yesterday, it does not analyze DETAILS OF THE PROBLEM: 1. click on the Scan Image using the HP Solution Center 2. click on Scan

  • HP 15 network controller driver - d104TX is not found.

    Hi, I'm newbie... I tried to install the drivers not listed in my computer. I can't find a driver for network controller. Help me pls. Network Controller ID PCI\VEN_168C & DEV_0036 & SUBSYS_217F103C & REV_01 PCI\VEN_168C & DEV_0036 & SUBSYS_217F103CP

  • HP 15 r-033tx: wifi Drvers

    Can I get a link to my wifi drivers It is hardware ID PCI\VEN_1814 & DEV_3290 & SUBSYS_18EC103C & REV_00 PCI\VEN_1814 & DEV_3290 & SUBSYS_18EC103CPCI\VEN_1814 & DEV_3290 & CC_028000PCI\VEN_1814 & DEV_3290 & CC_0280 Here are the compatible IDs PCI\VEN

  • Button in the App Menu events

    Can I call a function that is in the main window of the application, the user interface of the App menu with an event listener in the main application to listen for a click of a button in the user interface of the menu? Example: (UI button in swipe-d