Cannot access the start menu

Similar Questions

• Cannot access the Start Menu - 6 Ultra

  I realize there are other threads on this problem but mine is a little diiferent.

  I just replaced memory in both my Ultra 6 s. The steps were:

  Ultra unit has

  Deletion of records

  New memory installed

  A run the memory test (past)

  Replacement discs

  Fact

  Ultra B

  Deletion of records

  New memory installed

  Could not access the Start Menu to run a memory test.

  Shared memory of unit A and B of the unit (with 'good' memory)

  Could not access the Boot Menu

  Blank placed in drive B and turned on.

  Could not access the Boot Menu

  Disk spent

  Has started doing a factory reset to unit B

  I pulled the plug when I saw "pending RAIDar.

  So it seems to B unit works fine except that I can't access the Start Menu.

  I guess that the reset button does not work on Unit B or is it possibly caused by something else?

  Here is my MAIN question:

  What should I expect when I put the original disks to unit B?

  I noticed that Studio B was assigned to a new IP address, so I'm a little unsure of what to expect.

  Ah, that could be just a bad reset button.

• How to access the start menu? F10 is ignored. ESC is ignored.

  I have a HPE175z running a new installation of Windows 7 Home Premium.  I want to change the startup parameters.  When the system boots, the screen tells me that < F10 > give me access to the configuration.  F10 is completely ignored.  A message tells me later < ESC > will give me access to the Start Menu. < ESC > is also ignored.  Similarly, I have try all the keys are ignored - nothing interrupts the boot sequence.  How can I access the start menu?

  The problem is that no key during the boot stopped the boot process and allowing me to enter the installation or startup configuration.  I swapped keyboards and the problem disappeared.  Apparently, the keyboard did not have during the boot sequence.

  Thanks to all those who had a suggestion.

• ReadyNAS Duo v2 impossible to access the start menu

  Hello

  I am new in ReadyNAS, I bought this one for a long time but only used for a few days... I try to use again, I tried to upgrade the firwmare the/admin /, but surely a bug appear, because after restart-auto, I can not access the /admin/ with my own password or the default password factory.

  So, I am trying to go to the Start Menu to use that reinstalling the operating system. I & pressed the reset button, press the power button and wait... wait... wait... the 5 LEDs light up but that never happen :-(

  I have only 2 LEDs for disks (2 at the same time), and then a few seconds later, only the right one.

  Maybe I can try with a Boot USB Recovery but I can't find where to download (the search engine return nothing on the download page)

  Thanks for your help!

  Hi lakano,.

  Welcome to the community!

  Can you confirm the version of your ReadyNAS unit HW? It could have been labeled as ReadyNAS V2, but it could be a V1. Send me a PM with S/N so I can check.

  Kind regards

  BrianL
  NETGEAR community team

• In the start-up procedure, how can I remove "press ESC to access the Start Menu" when the machine hangs at the HP logo screen?

  Hello

  I am running 64 Win7HP on a laptop HP dv3, processor Core 2 Duo 4 GB DDR2 Ram, 320 GB HD, just as it came out of the box when purchased directly from HP replaced EXCEPT Vista OS with 64bits Win7HP.  Machine worked fine until the LAST update of Windows, where during the reboot, I got to the HP logo screen and in the lower left corner of the screen appeared the statement (for THE FIRST TIME) "Press ESC for the Start Menu."  Pressing Esc translates into another command "press Esc...".  Break. " When you press ESC, you get a black screen until the machine goes to sleep UNLESS you press Ctrl + Alt + Delete. If you press the 3 key combo, it will continue to start and brings you to the screen of your password for access and then operate nicely, until you turn off the system. So, how can I get rid of the superfluous instructions and get this thing here where he turns and goes directly to the screen of password without intermediate steps?  Restore points are long since gone for immediate access to the front last Win Update.
  The answer may be simple, but until now it has escaped my low range.  Any help is appreciated.
  Creyn1

  Hi Creyn1,

  Welcome to the community Microsoft and thanks for posting the question.

  According to the description, it looks that you are facing a problem when connecting, he would be grateful if you can answer this question in order to help you further.

  Do you receive an error message or error code?

  I suggest trying to boot in safe mode and check if it helps.

  Start your computer in safe mode: http://windows.microsoft.com/en-US/windows7/Start-your-computer-in-safe-mode

  If its working fine with safe mode then put the computer in a clean boot state, then check if that helps you

  Put the computer in a clean boot state and check if any third-party application is causing the problem, as the start-up boot helps eliminate software conflicts.

  How to solve the problem by running the clean boot in Windows 7: http://support.microsoft.com/kb/929135

  Note: Once you have completed troubleshooting, perform the steps in the step 3: to reset the computer as usual.

  If you have any other questions or you need Windows guru, do not hesitate to post your questions and we will be happy to help you.

• Reference Dell 760 does not start, cannot access the bios menu

  Desktop Dell 760 not start and displays a message: unsupported video configuration detected. I can't access installation or the bios menu. any ideas?

  http://support.Dell.com/

  Link to Dell technical support above.

  http://support.Dell.com/support/topics/global.aspx/support/DellCare/contact_us?c=us&l=en&s=Gen&redirect=1

  Reference Dell coordinated at the link above.

  I'm sorry, but we cannot help you with Bios problems.

  See you soon.

  Mick Murphy - Microsoft partner

• Need to do a system restore. When the computer starts and I cannot access the BIOS menu - help please... (WinXPSP3)

  I need to change the boot order, so the installation CD starts first-I can't enter the Bios at Startup Menu.

  It's a HP Pavilion that says F1 is supposed to allow me to access the menu of the BIOS at startup.  I also tried:

  Tip There are other keys that provide access to the BIOS. They include the following:

  o F1

  o F2

  o F10

  o, CTRL + ENTER

  o ALT + ENTER

  o, CTRL + ALT + ESC

  o, CTRL + ALT + INSERT

  And kay LED does not work either.  It's Windows XP - 32 bit home.

  Service Pack 3 is installed - SpySweeper is anti-virus and using the Windows Firewall.  This computer were of Trojan horses (40) and finally the browser was re-directed.

  Thanks for any help.

  It shud be a Hp tool installedon your system with which you can edit boot options even after logging on to XP.

  Its something like HP or Credential Manager protection tools.

  Maryse Agarwal

• Empty the screen how to access the start menu

  There is no start menu in windows vista, after I improved my avast & restarted

  Hello

  See if that helps you.

  Do a Safe Mode system restore to before the problem started.

  http://bertk.MVPs.org/html/restoresysv.html

  How to access Safe Mode

  http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/#Vista

  See you soon.

• Problem to access the Start Menu

  I hope I have explained this clearly.  I was deleting some files, when all of a sudden he disappeared & Windows Hotmail pg popped up in my Start Menu.
  Well, I'm out of here & brought my Start Menu up, I clicked on "Favorites", which is where I was deleting files, the files in the Favorites, all came as usual... BUT, when I went to click on one of these files--my Start Menu just went off the screen. I continued ebb in "Start menu" & "Favorites", but any file I clicked on in 'favourites', it does the same thing.
  What the hell happened?  I did without the knowledge/involuntarily/by accident hit a few keys get there?
  So, now, I can get into my "Start menu" - I can click on, "Patti" / Control Panel/ordinateur/favoris/etc.--mais I cannot click on anything in one of these - menu just disappears whenever I try.
  Is there anyone out there who can help me please?
  Thanking you in advance...

  Hello

  Glad to know that the problem is solved. Feel free to contact us in case where you face a problem with Windows in the future.

  Depending on the problem with screen saver, see the following articles and check if it helps.

  Change screen saver.

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-screen-saver

  Use pictures as a screen saver.

  http://Windows.Microsoft.com/en-us/Windows-Vista/use-pictures-as-your-screen-saver

• Cannot access the BIOS menu

  Good if some time ago that I bought the Dell XPS 8500 and since I never was able to access the menu of the bios, but it never bothered me until now so, if anyone knows what that is wrong or needs more information let me know please because I think it's a pretty serious problem now.

  To win 8, open bar charms and select settings, and then change the settings of PC. Then select update and recovery. Then recovery, then Advanced Startup, then help, then UEFI Firmware.

  You can also get there during a cold start. Start the computer, hold down the shift (the key perhaps) left and continually press the F2 key. You should get the BIOS, which is now called UEFI.

• P7 - 1287c: cannot access the BIOS menu!

  Sounds stupid... but I can not access my bios, I tried every recommended keystroke (post start splashscreen).  Assistance would be appreciated!

  Yes, very frustrating!

  It is a shot in the water, but what do we have to lose?  Try unplugging the hard drive to see if you can access the BIOS.

• Cannot access the context Menu to add input/output formula node

  It is a weird problem. I can't access the menu shortcut in the node of the formula. I right click on the border, nothing happens. Someone at - it will meet it before? Is there another way to add entries and exits?

  I'm running Vision Builder AI and want to use a formula node in my calculator.

  Found.

  In the configuration settings, there is an entry that is default 'hideBDPopupMenus = True'... changed to false and the menu pop.

  Thanks for your help.

  Josh

• Equium A60-692 - cannot open the start menu and keyboard problem

  I have a problem starting my laptop A60-692 and I'm not near the points of service.

  When I push the power button the screen goes through its startup routine gives her marching band welcome charge to the top of my desk.
  But when I click on the start only the start window flashes for a split sec and remains standing. If I press the windows key on the keyboard I can then click on the start and the start window appears on the screen.

  However if I open a program like note book or internet explorer, the keyboard will not and only gives a Bell sound when I use the keyboard. If I click Start, then shut down and click on restart the laptop turns off and then restart everything works fine!

  It's very boring and tedious. I'struggled with this for a long time, although it was not like that when new.
  Everyone had the same problem or have any advice to give?
  I would be very grateful!

  Concerning

  Andrew

  Hello

  Believe me it is not easy to say what the problem is here.
  I would like to know where the mouse you are using. Use you touch pad s notebook or external mouse?
  If you use the s key to laptop please disable it with FN + F9 and test with an external mouse only.

  What about the response of the keyboard? You can also try to test with external keyboard only. Only in this way you can see if this issue has something to do with the internal keyboard.
  Please do some testing to see if this issues can be related to defective portable equipment.

• Cannot access the settings menu in creative cloud app.

  I recently received an automatic update to CC2015. Once it is installed, I see the CC app at first pitch up (before the update he reduced) with wheel constantly spinning. I tried several solutions I found online, including the removal of the content from the OOBE folder. After that, the creative application Cloud seemed to load and work as is should (I could update my applications), and there was no turning endless wheel.

  However, I did not want it appears whenever I restart windows. I soon discovered that, when I try to open the settings menu, there is no response. No matter how much I click in the area of the gear icon bit, nothing happens. Ideas on how to proceed?

  WIn7 X 64 professional

  Photographer subscription

  Uninstall your application of office cc, own by the use of the Adobe Creative Cloud cleaning tool to solve installation problems , and then reinstall your cc app.

• Windows 8 shows a purple screen flashing after the start. I can't access the start menu and the desktop... How can I fix it?

  It worked fine for a day. Then this happened.

  Mine 8.1 flicking of screen between the office and purple screen constantly, occurred because of a Windows update that is has happened when I wasn't paying attention.

  I just went into recovery menu taking into turning computer turned off and before you turn on the computer, press and hold the F8 key

  -Press F8 all the time until the "Please wait" is displayed on your screen

  - Then it will say recovery

  -See Advanced repair options

  Were able to:

  -Troubleshooting

  -Advanced options

  -System restore

  I chose a restore date before that I did my last windows update and then flew it worked.

  Then I created a good restore point and reinstalled the update and everything was fine. I hope this helps someone.

  I guess the update got initially interrupted either by loss or hiccups in the Wi - Fi or DSL and something do not go right.